Bug#712720: linux-image-3.9-1-amd64: Broadcom driver phyerr log spam and associated link issues
Package: src:linux
Version: 3.9.6-1
Severity: important
While using the network interface, the device/link/connection seems to
randomly drop out. The kernel log shows the following brcmsmac logspam.
There is a related bug report for Fedora which has a few comments, found
here: --
https://bugzilla.redhat.com/show_bug.cgi?id=918396
I can confirm that bouncing the brcmsmac module "stabilizes" the card
for a short period. I am not putting any real transport load on the
device, streaming Internet radio is the only constant, and only real
load outside of browsing the WWW.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=UUID=e8ff1636-5dd6-46ea-836f-758c066387e0 ro quiet
** Not tainted
** Kernel log:
[23048.663030] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23048.663112] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23048.665582] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23048.665663] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23061.563205] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23061.563227] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23061.566018] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23061.566088] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23061.567010] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23061.567096] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23065.322716] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23065.322766] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23065.323862] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23065.323947] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23065.324689] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23065.324732] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23071.752773] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23071.752858] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23071.753554] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23071.753565] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23071.754962] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23071.755005] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23099.019256] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23099.019306] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23099.019506] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23099.019524] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23099.019707] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23099.019717] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23105.004567] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23105.004654] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23105.004888] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23105.004906] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23105.005139] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23105.005149] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23111.074150] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23111.074171] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23111.074328] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23111.074337] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23111.074559] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23111.074580] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23126.168039] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23126.168124] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23126.168702] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23126.168787] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23126.170256] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23126.170343] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23134.311506] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23134.311527] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23134.312053] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23134.312101] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23134.312275] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23134.312285] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23143.919834] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23143.919857] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23143.921379] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23143.921421] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23143.921729] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23143.921797] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23160.113825] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23160.113909] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23160.114415] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23160.114425] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23160.114634] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23160.114679] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23171.801450] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23171.801541] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23171.801870] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23171.801913] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23171.802175] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23171.802189] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23182.629473] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23182.629523] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23182.630145] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23182.630156] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23182.630517] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23182.630560] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23215.431161] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23215.431182] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23215.432492] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23215.432562] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23215.433068] brcmsmac bcma0:0: phyerr 0x1, rate 0x14
[23215.433086] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23225.283157] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23225.283240] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23225.284979] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23225.285001] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23225.285522] brcmsmac bcma0:0: phyerr 0x1, rate 0x37
[23225.285533] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23230.983436] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23230.983518] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23230.984216] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23230.984234] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23230.984450] brcmsmac bcma0:0: phyerr 0x1, rate 0x6e
[23230.984497] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23235.506066] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23235.506147] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23235.506373] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23235.506392] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
[23235.506617] brcmsmac bcma0:0: phyerr 0x1, rate 0xa
[23235.506627] brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x1)
** Model information
sys_vendor: Dell Inc.
product_name: Vostro 1540
product_version: A01
chassis_vendor: Dell Inc.
chassis_version: A01
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0NHCFP
board_version: A01
** Loaded modules:
brcmsmac
cordic
brcmutil
bcma
mac80211
cfg80211
hid_logitech_dj
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
joydev
arc4
snd_hda_codec_hdmi
snd_hda_codec_idt
hid_generic
iTCO_wdt
uvcvideo
videobuf2_vmalloc
videobuf2_memops
usbhid
i915
snd_hda_intel
snd_hda_codec
drm_kms_helper
snd_hwdep
drm
snd_pcm
snd_page_alloc
videobuf2_core
hid
videodev
i2c_algo_bit
btusb
bluetooth
dell_wmi
coretemp
sparse_keymap
acpi_cpufreq
mperf
snd_seq
iTCO_vendor_support
media
lpc_ich
psmouse
kvm_intel
i2c_i801
wmi
video
i2c_core
mei
dell_laptop
mfd_core
intel_ips
kvm
battery
ac
rfkill
serio_raw
pcspkr
processor
snd_seq_device
dcdbas
snd_timer
snd
button
evdev
soundcore
microcode
ext4
crc16
jbd2
mbcache
xts
gf128mul
ums_realtek
usb_storage
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
crc32c_intel
thermal
thermal_sys
ahci
libahci
r8169
mii
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0526]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f080 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fbf09000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbf08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fbf00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0c00000-d0dfffff
Prefetchable memory behind bridge: 00000000d0e00000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=13, subordinate=13, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d1200000-d15fffff
Prefetchable memory behind bridge: 00000000d0b00000-00000000d0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb400000-fbdfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbf07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=20, subordinate=20, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 05)
Subsystem: Dell Device [1028:0526]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0526]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at fbf06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Dell Device [1028:0526]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbf05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Dell Device [1028:0526]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbf04000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
12:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Dell Device [1028:0012]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbe00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Dell Device [1028:0526]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at d0b04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0b00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0a5c:21bc Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 001 Device 005: ID 0bda:58c1 Realtek Semiconductor Corp.
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-14
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.38
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: