Bug#712449: linux-image-3.9-1-amd64: sky2 ethernet driver panics on unplug re-plug, found possible fix
Package: src:linux
Version: 3.9.5-1
Severity: important
Tags: patch
I wasn't sure which package this goes to, since it happens on multiple
versions of packages and the latest linux kernel.
After more testing, I found that without my patch to remove 2 lines of
code, both of my marvell might repeatedly go up and down several
times, then it might stay up as 100 Mbit only, when it should be
gigabit. At one time it never went up until I unplug and re-plug in.
Then it eventually kernel panics after replug about 50 times. This
problem also happens on a package of linux-image-3.2.0-4-amd64, and on
the latest kernel (I used apt-get source linux also)
With my patch to remove 2 lines in sky2.c in "sky2_link_down" I no
longer have any repeated going down and up several times, I never see
it go down to 100 Mbps, and no longer kernel panics.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.9.5-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64
root=UUID=828cdbc2-c747-4845-afdc-ac00888094e4 ro quiet
** Not tainted
** Kernel log:
[ 5.900082] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.900140] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.900197] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 5.959315] Console: switching to colour frame buffer device 128x48
[ 5.961591] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.961593] radeon 0000:01:00.0: registered panic notifier
[ 5.961597] [drm] Initialized radeon 2.30.0 20080528 for
0000:01:00.0 on minor 0
[ 5.961693] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.961742] snd_hda_intel 0000:01:00.1: irq 86 for MSI/MSI-X
[ 6.004738] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 6.261778] cfg80211: World regulatory domain updated:
[ 6.261780] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 6.261782] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 6.261784] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 6.261786] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 6.261787] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 6.261788] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 8.264849] Adding 7176268k swap on /dev/sda4. Priority:-1
extents:1 across:7176268k
[ 8.275299] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.649668] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.844030] loop: module loaded
[ 33.523313] FAT-fs (sda3): utf8 is not a recommended IO charset for
FAT filesystems, filesystem will be case sensitive!
[ 33.702494] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 34.133679] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.186779] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 34.472583] Bridge firewalling registered
[ 34.474884] device eth1 entered promiscuous mode
[ 34.482273] 8139too 0000:07:06.0 eth1: link up, 100Mbps,
full-duplex, lpa 0x45E1
[ 34.482938] device eth2 entered promiscuous mode
[ 34.485516] sky2 0000:08:00.0 eth2: enabling interface
[ 34.485570] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 34.486089] device eth3 entered promiscuous mode
[ 34.488589] sky2 0000:06:00.0 eth3: enabling interface
[ 34.488631] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 34.489475] device eth4 entered promiscuous mode
[ 34.506442] r8169 0000:02:00.0: firmware: agent loaded
rtl_nic/rtl8168f-1.fw into memory
[ 34.609836] r8169 0000:02:00.0 eth4: link down
[ 34.609866] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 34.614956] br0: port 1(eth1) entered forwarding state
[ 34.614962] br0: port 1(eth1) entered forwarding state
[ 35.250923] 8139too 0000:07:05.0 eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
[ 36.020959] RPC: Registered named UNIX socket transport module.
[ 36.020962] RPC: Registered udp transport module.
[ 36.020963] RPC: Registered tcp transport module.
[ 36.020964] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.048556] FS-Cache: Loaded
[ 36.056940] Key type dns_resolver registered
[ 36.089967] FS-Cache: Netfs 'nfs' registered for caching
[ 36.124464] r8169 0000:02:00.0 eth4: link up
[ 36.124471] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 36.124955] br0: port 4(eth4) entered forwarding state
[ 36.124958] br0: port 4(eth4) entered forwarding state
[ 36.132697] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 36.928489] sky2 0000:06:00.0 eth3: Link is up at 1000 Mbps, full
duplex, flow control rx
[ 36.928499] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 36.928513] br0: port 3(eth3) entered forwarding state
[ 36.928516] br0: port 3(eth3) entered forwarding state
[ 37.483863] phy0 -> rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2860.bin'.
[ 37.503876] rt2800pci 0000:05:00.0: firmware: agent loaded
rt2860.bin into memory
[ 37.503880] phy0 -> rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.34.
[ 37.547750] device wlan0 entered promiscuous mode
[ 37.547843] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.547846] br0: port 5(wlan0) entered forwarding state
[ 37.547849] br0: port 5(wlan0) entered forwarding state
[ 37.547874] cfg80211: Calling CRDA for country: US
[ 37.579714] cfg80211: Regulatory domain changed to country: US
[ 37.579717] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 37.579719] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2700 mBm)
[ 37.579720] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 1700 mBm)
[ 37.579722] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 37.579723] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 37.579725] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 37.579726] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 3000 mBm)
[ 37.656452] 8021q: 802.1Q VLAN Support v1.8
[ 37.664405] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.347022] powernow-k8: This CPU is not supported anymore, using
acpi-cpufreq instead.
[ 38.636188] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 44.017080] Bluetooth: Core ver 2.16
[ 44.017098] NET: Registered protocol family 31
[ 44.017100] Bluetooth: HCI device and connection manager initialized
[ 44.017107] Bluetooth: HCI socket layer initialized
[ 44.017110] Bluetooth: L2CAP socket layer initialized
[ 44.017116] Bluetooth: SCO socket layer initialized
[ 44.031587] Bluetooth: RFCOMM TTY layer initialized
[ 44.031595] Bluetooth: RFCOMM socket layer initialized
[ 44.031597] Bluetooth: RFCOMM ver 1.11
[ 44.204695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.204698] Bluetooth: BNEP filters: protocol multicast
[ 44.204705] Bluetooth: BNEP socket layer initialized
[ 44.698566] lp: driver loaded but no devices found
[ 45.083134] ppdev: user-space parallel port driver
[ 47.449915] sky2 0000:08:00.0 eth2: Link is up at 100 Mbps, full
duplex, flow control both
[ 47.449932] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 47.449956] br0: port 2(eth2) entered forwarding state
[ 47.449969] br0: port 2(eth2) entered forwarding state
[ 49.663214] br0: port 1(eth1) entered forwarding state
[ 51.169601] br0: port 4(eth4) entered forwarding state
[ 52.002944] br0: port 3(eth3) entered forwarding state
[ 52.579888] br0: port 5(wlan0) entered forwarding state
[ 62.515779] br0: port 2(eth2) entered forwarding state
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 1708
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A97 R2.0
board_version: Rev 1.xx
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
8021q
garp
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
bridge
stp
llc
ipt_MASQUERADE
xt_nat
iptable_nat
nf_nat_ipv4
nf_nat
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
iptable_mangle
iptable_raw
iptable_security
ip_tables
x_tables
nls_utf8
nls_cp437
vfat
fat
loop
firewire_sbp2
firewire_core
crc_itu_t
snd_hda_codec_hdmi
arc4
snd_hda_codec_realtek
rt2800pci
rt2800lib
rt2x00pci
rt2x00mmio
rt2x00lib
mac80211
radeon
snd_hda_intel
cfg80211
snd_hda_codec
mperf
ttm
drm_kms_helper
kvm_amd
snd_hwdep
snd_pcm_oss
snd_mixer_oss
drm
snd_pcm
eeepc_wmi
asus_wmi
edac_mce_amd
snd_page_alloc
sparse_keymap
sp5100_tco
video
snd_seq_midi
rfkill
snd_seq_midi_event
i2c_piix4
i2c_algo_bit
crc_ccitt
processor
edac_core
eeprom_93cx6
kvm
k10temp
fam15h_power
thermal_sys
mxm_wmi
snd_rawmidi
pcspkr
i2c_core
snd_seq
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
snd_seq_device
snd_timer
xts
lrw
snd
wmi
button
soundcore
evdev
gf128mul
ext4
crc16
jbd2
mbcache
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
8139too
8139cp
ehci_pci
microcode
ohci_hcd
ehci_hcd
sky2
xhci_hcd
r8169
mii
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo br0
iface lo inet loopback
## from http://wiki.debian.org/BridgeNetworkConnections#Setting_up_your_Bridge
# The primary network interface
auto eth0
iface eth0 inet dhcp
dns-nameservers 208.67.222.222 8.8.8.8
#iface eth0 inet static
# address 192.168.0.2
# broadcast 192.168.0.255
# netmask 255.255.255.0
# gateway 192.168.0.1
# dns-nameservers 208.67.222.222 8.8.8.8
# Set up interfaces manually, avoiding conflicts with, e.g., network manager
iface eth1 inet manual
iface eth2 inet manual
iface eth3 inet manual
iface eth4 inet manual
iface eth5 inet manual
iface wlan0 inet manual
# Bridge setup
# iface br0 inet dhcp
# bridge_ports eth1 eth2 eth3
# Bridge setup
iface br0 inet static
bridge_ports eth1 eth2 eth3 eth4 eth5 wlan0
address 192.168.3.1
broadcast 192.168.3.255
netmask 255.255.255.0
# gateway 192.168.3.1
# dns-nameservers 208.67.222.222 8.8.8.8
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master br0 state UP qlen 1000
link/ether 60:a4:4c:5a:ce:e4 brd ff:ff:ff:ff:ff:ff
3: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master br0 state UP qlen 1000
link/ether 00:50:43:01:2c:e0 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master br0 state UP qlen 1000
link/ether 00:50:43:01:2e:51 brd ff:ff:ff:ff:ff:ff
5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether 00:e0:4d:30:4a:02 brd ff:ff:ff:ff:ff:ff
inet 208.107.22.163/23 brd 208.107.23.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::2e0:4dff:fe30:4a02/64 scope link
valid_lft forever preferred_lft forever
6: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master br0 state UNKNOWN qlen 1000
link/ether 00:e0:4d:30:51:fd brd ff:ff:ff:ff:ff:ff
7: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
br0 state UP qlen 1000
link/ether 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff
8: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff
inet 192.168.3.1/24 brd 192.168.3.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::250:43ff:fe01:2ce0/64 scope link
valid_lft forever preferred_lft forever
9: mon.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
state UNKNOWN qlen 1000
link/ieee802.11/radiotap 00:22:43:65:56:9b brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
br0: 83055 682 0 0 0 0 0 0
88545 466 0 0 0 0 0 0
mon.wlan0: 402954 1679 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth0: 1434935 3555 0 0 0 0 0 0
124795 929 0 0 0 0 0 0
eth1: 50395 294 0 0 0 0 0 0
108534 706 0 0 0 0 0 0
eth2: 153541713 2558684 0 0 0 0 0 205
81990115 1171063 0 0 0 0 0 0
eth3: 81971954 1170990 0 0 0 0 0 13
127985353 2558884 0 0 0 0 0 0
eth4: 0 0 0 0 0 0 0 0
58153 427 0 0 0 0 0 0
lo: 500 4 0 0 0 0 0 0
500 4 0 0 0 0 0 0
wlan0: 12068 135 0 0 0 0 0 0
77423 466 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1916 total packets received
18 with invalid headers
292 forwarded
0 incoming packets discarded
1459 incoming packets delivered
1300 requests sent out
45 dropped because of missing route
Icmp:
50 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 50
24 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 6
time exceeded: 18
IcmpMsg:
InType3: 50
OutType3: 6
OutType11: 18
Tcp:
5 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
1031 segments received
653 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
434 packets received
6 packets to unknown port received.
0 packet receive errors
331 packets sent
UdpLite:
TcpExt:
12 delayed acks sent
1 packets directly queued to recvmsg prequeue.
1 bytes directly received in process context from prequeue
800 packet headers predicted
92 acknowledgments not containing data payload received
TCPRcvCoalesce: 72
IpExt:
InNoRoutes: 5
InMcastPkts: 54
OutMcastPkts: 59
InBcastPkts: 199
OutBcastPkts: 94
InOctets: 1373081
OutOctets: 240515
InMcastOctets: 16868
OutMcastOctets: 17076
InBcastOctets: 25649
OutBcastOctets: 10620
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI
bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe600000-fe6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40)
(prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8444]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0
USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Cedar [Radeon HD 7350] [1002:68fa] (prog-if 00 [VGA
controller])
Subsystem: PC Partner Limited Device [174b:e153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 85
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: PC Partner Limited Device [174b:aa68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 86
Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev
09)
Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042
SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042
SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless
802.11n 1T/2R PCIe [1814:0781]
Subsystem: Ralink corp. Device [1814:2790]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20)
Subsystem: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit
Ethernet Controller [11ab:4362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 73
Region 0: Memory at fe620000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c000 [size=256]
Expansion ROM at fe600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
07:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b100 [size=256]
Region 1: Memory at fe521000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fe510000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
07:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at fe520000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fe500000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20)
Subsystem: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit
Ethernet Controller [11ab:4362]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: Memory at fe420000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a000 [size=256]
Expansion ROM at fe400000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 004 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (1010, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.38
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: