Your message dated Sat, 08 Jun 2013 17:09:04 +0100 with message-id <1370707744.4149.27.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#594149: linux-image-2.6.32-5-amd64: Lid switch correct every other time; suspend every other lid close; Samsung N150-11 netbook has caused the Debian Bug report #594149, regarding linux-image-2.6.32-5-amd64: Lid switch correct every other time; suspend every other lid close; Samsung N150-11 netbook to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 594149: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594149 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Lid switch correct every other time; suspend every other lid close; Samsung N150-11 netbook
- From: Doug Currie <deb.9.eeeeeee@xoxy.net>
- Date: Mon, 23 Aug 2010 23:21:31 -0400
- Message-id: <20100824032131.3455.60935.reportbug@eSammy>
Package: linux-2.6 Version: 2.6.32-20 Severity: normal Samsung N150-11 netbook. Each lid close&open toggles the lid switch state so when the lid is open, half the time it reports closed: e@eSammy:~$ cat /proc/acpi/button/lid/LID0/state state: open # close & open lid e@eSammy:~$ cat /proc/acpi/button/lid/LID0/state state: closed So, the netbook only suspends every other time the lid is closed. This could be dangerous with the netbook stowed in running mode getting hot. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=3cb206a7-b396-4c4f-b462-cd89b27eb3c4 ro quiet ** Not tainted ** Kernel log: [ 1050.208993] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209058] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x204) [ 1050.209078] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x40514041) [ 1050.209089] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x40304020) [ 1050.209100] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 1050.209117] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209129] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209189] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303) [ 1050.209208] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x40714061) [ 1050.209220] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020) [ 1050.209231] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 1050.209247] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209260] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209319] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 1050.209339] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40b140a1) [ 1050.209350] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0x40904080) [ 1050.209361] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) [ 1050.209377] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209390] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209462] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209506] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209549] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209591] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209643] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1050.209686] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1050.209697] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 1050.209783] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 1050.209815] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 1050.209924] ath9k 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1050.209959] ath9k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0100004) [ 1050.209971] ath9k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1050.209985] ath9k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 1050.210270] sky2 0000:09:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103) [ 1050.210406] sky2 0000:09:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 1050.210459] sky2 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004) [ 1050.210488] sky2 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1050.210541] sky2 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1050.222997] i915 0000:00:02.0: setting latency timer to 64 [ 1050.223545] [drm] Big FIFO is enabled [ 1050.292089] [drm] Big FIFO is enabled [ 1050.292109] [drm] Big FIFO is enabled [ 1050.292280] [drm] Big FIFO is enabled [ 1050.316212] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1050.316222] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1050.414284] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1050.414295] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1050.414328] usb usb2: root hub lost power or was reset [ 1050.414360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1050.414374] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1050.414409] usb usb3: root hub lost power or was reset [ 1050.414442] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1050.414457] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1050.414491] usb usb4: root hub lost power or was reset [ 1050.414524] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1050.414537] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1050.414564] usb usb5: root hub lost power or was reset [ 1050.414596] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1050.414608] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1050.414664] pci 0000:00:1e.0: setting latency timer to 64 [ 1050.414687] ahci 0000:00:1f.2: setting latency timer to 64 [ 1050.414913] ath9k 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1050.548069] sd 0:0:0:0: [sda] Starting disk [ 1050.732075] ata4: SATA link down (SStatus 0 SControl 300) [ 1050.732107] ata3: SATA link down (SStatus 0 SControl 300) [ 1050.732142] ata2: SATA link down (SStatus 0 SControl 300) [ 1052.188069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1052.207396] ata1.00: configured for UDMA/133 [ 1052.340057] usb 1-8: reset high speed USB device using ehci_hcd and address 2 [ 1052.486313] PM: Finishing wakeup. [ 1052.486318] Restarting tasks ... done. [ 1052.817687] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1052.826920] sky2 eth0: enabling interface [ 1052.827869] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1058.715555] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 1059.387947] CPU0 attaching NULL sched-domain. [ 1059.387964] CPU1 attaching NULL sched-domain. [ 1059.420205] CPU0 attaching sched-domain: [ 1059.420217] domain 0: span 0-1 level SIBLING [ 1059.420227] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 1059.420249] domain 1: span 0-1 level MC [ 1059.420257] groups: 0-1 (cpu_power = 1178) [ 1059.420277] CPU1 attaching sched-domain: [ 1059.420285] domain 0: span 0-1 level SIBLING [ 1059.420293] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 1059.420313] domain 1: span 0-1 level MC [ 1059.420321] groups: 0-1 (cpu_power = 1178) [ 1059.794280] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 1060.792406] wlan0: direct probe to AP 00:13:10:6a:0e:bb (try 1) [ 1060.795190] wlan0: direct probe responded [ 1060.795200] wlan0: authenticate with AP 00:13:10:6a:0e:bb (try 1) [ 1060.799217] wlan0: authenticated [ 1060.799276] wlan0: associate with AP 00:13:10:6a:0e:bb (try 1) [ 1060.801980] wlan0: RX AssocResp from 00:13:10:6a:0e:bb (capab=0x431 status=0 aid=5) [ 1060.801991] wlan0: associated [ 1060.802608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1070.860039] wlan0: no IPv6 routers present [ 4301.869590] [drm] Big FIFO is enabled [ 4301.940079] [drm] Big FIFO is enabled [ 4301.940103] [drm] Big FIFO is enabled [ 4302.273843] [drm] Big FIFO is enabled ** Model information sys_vendor: SAMSUNG ELECTRONICS CO., LTD. product_name: N150P/N210P/N220P product_version: Not Applicable chassis_vendor: SAMSUNG ELECTRONICS CO., LTD. chassis_version: N/A bios_vendor: Phoenix Technologies Ltd. bios_version: 01KY.M008.20100430.RHU board_vendor: SAMSUNG ELECTRONICS CO., LTD. board_name: N150P/N210P/N220P board_version: Not Applicable ** Loaded modules: Module Size Used by easy_slow_down_manager 3953 0 sco 7209 2 bridge 39598 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29581 0 l2cap 24736 6 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41827 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 5555 0 cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 fuse 50190 1 loop 11783 0 snd_hda_codec_realtek 235522 1 snd_hda_intel 19987 3 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 2 snd_pcm_oss arc4 1274 2 snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss ecb 1841 2 snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi uvcvideo 51887 0 snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event videodev 29993 1 uvcvideo ath9k 249912 0 v4l1_compat 11442 2 uvcvideo,videodev snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 136956 1 ath9k v4l2_compat_ioctl32 8538 1 videodev snd 46446 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ath 8006 1 ath9k i915 254567 2 soundcore 4598 2 snd drm_kms_helper 20065 1 i915 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm drm 142551 3 i915,drm_kms_helper cfg80211 101464 3 ath9k,mac80211,ath i2c_i801 7830 0 i2c_algo_bit 4225 1 i915 i2c_core 15712 6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit serio_raw 3752 0 video 17445 1 i915 rfkill 13044 3 bluetooth,cfg80211 samsung_backlight 2740 0 pcspkr 1699 0 evdev 7352 13 output 1692 1 video psmouse 49777 0 led_class 2433 1 ath9k button 4650 1 i915 battery 4998 0 ac 2192 0 processor 30247 3 acpi_cpufreq ext3 106518 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 sd_mod 29777 3 crc_t10dif 1276 1 sd_mod ahci 32358 2 uhci_hcd 18521 0 libata 133584 1 ahci thermal 11674 0 sky2 39278 0 ehci_hcd 31135 0 scsi_mod 122117 2 sd_mod,libata usbcore 121943 4 uvcvideo,uhci_hcd,ehci_hcd thermal_sys 11942 3 video,processor,thermal nls_base 6361 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:24:54:a1:66:b5 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 78:e4:00:50:26:9e brd ff:ff:ff:ff:ff:ff inet 192.168.0.108/24 brd 192.168.0.255 scope global wlan0 inet6 fe80::7ae4:ff:fe50:269e/64 scope link valid_lft forever preferred_lft forever 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 9a:ec:24:ff:7c:a2 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 89392 1088 0 0 0 0 0 0 89392 1088 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 816593 2354 0 0 0 0 0 0 157688 987 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 3741 total packets received 4 with invalid addresses 0 forwarded 0 incoming packets discarded 2732 incoming packets delivered 1898 requests sent out 5 dropped because of missing route Icmp: 544 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 544 544 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 544 IcmpMsg: InType3: 544 OutType3: 544 Tcp: 17 active connections openings 0 passive connection openings 0 failed connection attempts 2 connection resets received 1 connections established 456 segments received 328 segments send out 12 segments retransmited 0 bad segments received. 10 resets sent Udp: 770 packets received 544 packets to unknown port received. 0 packet receive errors 1007 packets sent UdpLite: TcpExt: 1 TCP sockets finished time wait in fast timer 10 delayed acks sent Quick ack mode was activated 8 times 166 packet headers predicted 111 acknowledgments not containing data payload received 6 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 5 other TCP timeouts 8 DSACKs sent for old packets 2 connections reset due to early user close 1 connections aborted due to timeout 1 times unabled to send RST due to no memory IpExt: InMcastPkts: 56 OutMcastPkts: 48 InBcastPkts: 1095 OutBcastPkts: 386 InOctets: 927587 OutOctets: 198424 InMcastOctets: 12742 OutMcastOctets: 10654 InBcastOctets: 135942 OutBcastOctets: 51724 *** Device features: eth0: 0x10823 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0380000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0100000-f01fffff Prefetchable memory behind bridge: 0000000040000000-00000000401fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 40200000-403fffff Prefetchable memory behind bridge: 0000000040400000-00000000405fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0200000-f02fffff Prefetchable memory behind bridge: 0000000040600000-00000000407fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 40800000-409fffff Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=11, subordinate=11, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 29 Region 0: I/O ports at 18e8 [size=8] Region 1: I/O ports at 18dc [size=4] Region 2: I/O ports at 18e0 [size=8] Region 3: I/O ports at 18d8 [size=4] Region 4: I/O ports at 18c0 [size=16] Region 5: Memory at f0604400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: i801_smbus 05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e025] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0ac8:c33f Z-Star Microelectronics Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs ii linux-base 2.6.32-20 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-20 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.26 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.26 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---
--- Begin Message ---
- To: 594149-done@bugs.debian.org
- Subject: Re: Bug#594149: linux-image-2.6.32-5-amd64: Lid switch correct every other time; suspend every other lid close; Samsung N150-11 netbook
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sat, 08 Jun 2013 17:09:04 +0100
- Message-id: <1370707744.4149.27.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <7F65D4AB-9D90-48E1-9DF9-E1150565CAAA@gmail.com>
- References: <20100824032131.3455.60935.reportbug@eSammy> <1282712292.22839.89.camel@localhost> <1FB12184-1B7F-4066-91C8-E8D032194683@gmail.com> <20100825165632.GJ5063@decadent.org.uk> <7F65D4AB-9D90-48E1-9DF9-E1150565CAAA@gmail.com>
On Wed, 2010-08-25 at 17:26 -0400, Doug Currie wrote: > On Aug 25, 2010, at 12:56 PM, Ben Hutchings wrote: > > > OK. Please report this upstream at <https://bugzilla.kernel.org>, under > > product 'ACPI', component 'EC'. Let us know the bug number or URL so that > > we can track it. > > https://bugzilla.kernel.org/show_bug.cgi?id=17081 The result of that was that this is a BIOS bug and there's no good way for the kernel to work around. So I'm sorry but this won't be fixed. Ben. -- Ben Hutchings friends: People who know you well, but like you anyway.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---