[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#594342: marked as done (linux-image-2.6.32-5-686: DVD video playback fails with 2.6.32-20 (works with 2.6.32-19))



Your message dated Sat, 8 Jun 2013 12:16:55 +0200
with message-id <20130608101655.GE4796@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #594342,
regarding linux-image-2.6.32-5-686: DVD video playback fails with 2.6.32-20 (works with 2.6.32-19)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
594342: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594342
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-20
Severity: normal

I'm trying to play a commercial DVD, using totem or vlc on a squeeze system.

with 2.6.32-19, i can play it successfully in both players.

when i upgrade to 2.6.32-20, totem simply crashes, while vlc can play the
audio, but no video is rendered.


The Totem crash emits these errors to ~/.xsession-errors:

The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
  (Details: serial 124 error_code 11 request_code 132 minor_code 19)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)

maybe this has to do with the recent kernel fix mentioned in
http://lwn.net/Articles/400746/ ?

Thanks for keeping the linux kernel in good shape in debian!  let me know if
you need any additional information.

        --dkg



-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:38:27 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b9ddc8b0-e070-43f2-83b9-b3209ae8e3c3 ro quiet

** Not tainted

** Kernel log:
[    2.084371] ata2.00: configured for UDMA/33
[    2.084595] ata1.00: configured for UDMA/100
[    2.084797] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1614N  TM10 PQ: 0 ANSI: 5
[    2.086333] scsi 1:0:0:0: CD-ROM            SAMSUNG  DVD-ROM SD-616E  F501 PQ: 0 ANSI: 5
[    2.246943] ata3: SATA link down (SStatus 0 SControl 310)
[    2.456018] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    2.574937] ata4: SATA link down (SStatus 0 SControl 310)
[    2.707385] usb 2-1: New USB device found, idVendor=1241, idProduct=1603
[    2.707391] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.707395] usb 2-1: Product: USB Keyboard
[    2.707399] usb 2-1: Manufacturer:  
[    2.707547] usb 2-1: configuration #1 chosen from 1 choice
[    2.796698] usbcore: registered new interface driver hiddev
[    2.800169] [drm] Initialized drm 1.1.0 20060810
[    2.827632] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.827724] sd 0:0:0:0: [sda] Write Protect is off
[    2.827730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.827768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.828053]  sda: sda1 sda2 <
[    2.843055] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[    2.843249] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1/input0
[    2.861556] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.861568] i915 0000:00:02.0: setting latency timer to 64
[    2.865482]  sda5
[    2.869231] [drm] set up 7M of stolen space
[    2.873665]  sda6 sda7
[    2.893714] [drm] initialized overlay support
[    2.915646]  sda8 sda9 >
[    2.935511] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.941862] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[    2.941973] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1/input1
[    2.942023] usbcore: registered new interface driver usbhid
[    2.942028] usbhid: v2.6:USB HID core driver
[    3.048057] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    3.055481] sr0: scsi3-mmc drive: 6x/48x cd/rw xa/form2 cdda tray
[    3.055488] Uniform CD-ROM driver Revision: 3.20
[    3.056250] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.091806] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.092299] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.237563] Console: switching to colour frame buffer device 160x64
[    3.237588] usb 4-2: New USB device found, idVendor=05fe, idProduct=0011
[    3.237593] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.237597] usb 4-2: Product: PS2/USB Browser Combo Mouse
[    3.237601] usb 4-2: Manufacturer: Cypress Sem
[    3.237796] usb 4-2: configuration #1 chosen from 1 choice
[    3.247496] fb0: inteldrmfb frame buffer device
[    3.247499] registered panic notifier
[    3.247533] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.279294] input: Cypress Sem PS2/USB Browser Combo Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[    3.279470] generic-usb 0003:05FE:0011.0003: input,hidraw2: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.2-2/input0
[    3.746330] PM: Starting manual resume from disk
[    3.746338] PM: Resume from partition 8:5
[    3.746341] PM: Checking hibernation image.
[    3.746658] PM: Error -22 checking image file
[    3.746661] PM: Resume from disk failed.
[    3.792943] kjournald starting.  Commit interval 5 seconds
[    3.792962] EXT3-fs: mounted filesystem with ordered data mode.
[    5.720111] udev: starting version 160
[    6.309893] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.586598] processor LNXCPU:00: registered as cooling_device0
[    6.710431] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    6.719818] parport_pc 00:07: reported by Plug and Play ACPI
[    6.719878] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    6.739546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.787289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.796126] intel_rng: FWH not detected
[    7.023460] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.481983] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.482063] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.852018] intel8x0_measure_ac97_clock: measured 54800 usecs (2640 samples)
[    8.852025] intel8x0: clocking to 48000
[    9.587098] Adding 3405816k swap on /dev/sda5.  Priority:-1 extents:1 across:3405816k 
[    9.884387] EXT3 FS on sda1, internal journal
[   10.756637] kjournald starting.  Commit interval 5 seconds
[   10.756810] EXT3 FS on sda6, internal journal
[   10.756819] EXT3-fs: mounted filesystem with ordered data mode.
[   12.109723] fuse init (API version 7.13)
[   16.257621] e100 0000:01:07.0: firmware: requesting e100/d101m_ucode.bin
[   16.424404] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.428291] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[   16.428960] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.326171] Bluetooth: Core ver 2.15
[   21.326289] NET: Registered protocol family 31
[   21.326293] Bluetooth: HCI device and connection manager initialized
[   21.326300] Bluetooth: HCI socket layer initialized
[   21.408837] Bluetooth: L2CAP ver 2.14
[   21.408843] Bluetooth: L2CAP socket layer initialized
[   21.552090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.552097] Bluetooth: BNEP filters: protocol multicast
[   21.795528] Bridge firewalling registered
[   22.024789] Bluetooth: SCO (Voice Link) ver 0.6
[   22.024796] Bluetooth: SCO socket layer initialized
[   22.604300] lp0: using parport0 (interrupt-driven).
[   22.632529] ppdev: user-space parallel port driver
[   23.930797] render error detected, EIR: 0x00000010
[   23.930808] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[   23.930827] render error detected, EIR: 0x00000010
[   26.768011] eth0: no IPv6 routers present
[   44.720781] UDF-fs: Partition marked readonly; forcing readonly mount
[   44.739248] UDF-fs INFO UDF: Mounting volume 'BATTLESTAR_GALACTICA_25', timestamp 2006/07/18 23:19 (1000)

** Model information
not available

** Loaded modules:
Module                  Size  Used by
isofs                  24608  0 
udf                    62930  1 
crc_itu_t               1035  1 udf
speedstep_lib           2468  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1480  0 
cpufreq_stats           1940  0 
cpufreq_powersave        602  0 
ppdev                   4058  0 
lp                      5570  0 
sco                     5857  2 
bridge                 32987  0 
stp                      996  1 bridge
bnep                    7444  2 
l2cap                  21705  3 bnep
crc16                   1027  1 l2cap
bluetooth              36327  5 sco,bnep,l2cap
rfkill                 10264  3 bluetooth
binfmt_misc             4907  1 
fuse                   43758  1 
snd_intel8x0           19523  1 
snd_ac97_codec         79148  1 snd_intel8x0
ac97_bus                 710  1 snd_ac97_codec
snd_pcm_oss            28671  0 
snd_mixer_oss          10461  1 snd_pcm_oss
snd_pcm                47214  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi            3576  0 
snd_rawmidi            12505  1 snd_seq_midi
snd_seq_midi_event      3684  1 snd_seq_midi
snd_seq                35463  2 snd_seq_midi,snd_seq_midi_event
snd_timer              12258  2 snd_pcm,snd_seq
snd_seq_device          3673  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    34363  11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               3450  1 snd
i2c_i801                6462  0 
snd_page_alloc          5045  2 snd_intel8x0,snd_pcm
shpchp                 21220  0 
rng_core                2178  0 
pci_hotplug            18065  1 shpchp
parport_pc             15799  1 
dcdbas                  3892  0 
psmouse                44657  0 
parport                22554  3 ppdev,lp,parport_pc
processor              26615  0 
evdev                   5609  13 
pcspkr                  1207  0 
serio_raw               2916  0 
ext3                   94204  2 
jbd                    32169  1 ext3
mbcache                 3762  1 ext3
sg                     15968  0 
sr_mod                 10770  1 
i915                  221415  2 
cdrom                  26487  1 sr_mod
sd_mod                 25869  4 
crc_t10dif              1012  1 sd_mod
drm_kms_helper         18305  1 i915
drm                   112020  3 i915,drm_kms_helper
usbhid                 27980  0 
i2c_algo_bit            3497  1 i915
ata_generic             2019  0 
hid                    50645  1 usbhid
uhci_hcd               16057  0 
i2c_core               12696  5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
sata_via                5537  0 
thermal                 9206  0 
e100                   22317  0 
video                  14605  1 i915
ata_piix               17640  4 
ehci_hcd               27851  0 
libata                115721  3 ata_generic,sata_via,ata_piix
button                  3598  1 i915
thermal_sys             9378  3 processor,thermal,video
mii                     2714  1 e100
output                  1204  1 video
usbcore                98386  4 usbhid,uhci_hcd,ehci_hcd
scsi_mod              101401  4 sg,sr_mod,sd_mod,libata
nls_base                4541  3 isofs,udf,usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:d0:b7:b1:b6:b6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.13.36/24 brd 192.168.13.255 scope global eth0
    inet6 fe80::2d0:b7ff:feb1:b6b6/64 scope link 
       valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN 
    link/ether 2a:dd:61:05:43:b0 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:     560       8    0    0    0     0          0         0      560       8    0    0    0     0       0          0
  eth0:  129557     149    0    0    0     0          0         0    15017     144    0    0    0     0       0          0
  pan0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    163 total packets received
    2 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    161 incoming packets delivered
    126 requests sent out
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    5 active connections openings
    0 passive connection openings
    0 failed connection attempts
    0 connection resets received
    0 connections established
    104 segments received
    88 segments send out
    0 segments retransmited
    0 bad segments received.
    3 resets sent
Udp:
    35 packets received
    0 packets to unknown port received.
    0 packet receive errors
    36 packets sent
UdpLite:
TcpExt:
    4 delayed acks sent
    78 packet headers predicted
    9 acknowledgments not containing data payload received
    2 predicted acknowledgments
IpExt:
    InMcastPkts: 12
    OutMcastPkts: 14
    InBcastPkts: 21
    InOctets: 130258
    OutOctets: 9904
    InMcastOctets: 2503
    OutMcastOctets: 2583
    InBcastOctets: 3528

*** Device features:
eth0: 0x0
lo: 0x13865
pan0: 0xff3865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01)
	Subsystem: Dell Device [1028:0127]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at ffa00000 (32-bit, non-prefetchable) [size=512K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ff80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at ff60 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ff40 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0127]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: ff700000-ff9fffff
	Prefetchable memory behind bridge: 48000000-481fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at 48200000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at dc80 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
	Subsystem: Dell Device [1028:0127]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at d800 [size=256]
	Region 1: I/O ports at dc40 [size=64]
	Region 2: Memory at ffa80400 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at ffa80000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH

01:07.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter with Alert On LAN* [8086:000e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ecc0 [size=64]
	Region 2: Memory at ff700000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at 48000000 [disabled] [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: e100

01:08.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
	Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at ecb0 [size=16]
	Region 1: I/O ports at ec90 [size=16]
	Region 2: I/O ports at ec70 [size=16]
	Region 3: I/O ports at ec50 [size=16]
	Region 4: I/O ports at ec20 [size=32]
	Region 5: I/O ports at e800 [size=256]
	Expansion ROM at 48100000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: sata_via


** USB devices:
Bus 004 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1241:1603 Belkin Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii  debconf [debconf-2.0]         1.5.35     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98       tools for generating an initramfs
ii  linux-base                    2.6.32-20  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
pn  firmware-linux-free           <none>     (no description available)
ii  libc6-i686                    2.11.2-2   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-5-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.26       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
  linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
  linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
  linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:



--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: