--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.34-1-amd64: X fails to start because modesetting is off
- From: Michal Suchanek <michal.suchanek@ruk.cuni.cz>
- Date: Mon, 12 Jul 2010 10:22:09 +0200
- Message-id: <20100712082209.3052.2903.reportbug@IPX7A-ION.ruk.cuni.cz>
Package: linux-2.6
Version: 2.6.34-1~experimental.2
Severity: normal
When I boot modesetting is off resulting in inability to start X.
When I boot modesetting is off resulting in inability to start X.
When I boot modesetting is off resulting in inability to start X.
-- Package-specific info:
** Version:
Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 22:29:25 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.34-1-amd64 root=UUID=3b8f6a64-5899-462a-aec0-6ddefd878ecf ro fbcon=rotate:3 quiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 22:29:25 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-1-amd64 root=UUID=3b8f6a64-5899-462a-aec0-6ddefd878ecf ro fbcon=rotate:3 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0CDC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 0CE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0CDB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000
[ 0.000000] 0000000000 - 00cd800000 page 2M
[ 0.000000] 00cd800000 - 00cd9ff000 page 4k
[ 0.000000] kernel direct mapping tables up to cd9ff000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000
[ 0.000000] 0100000000 - 0128000000 page 2M
[ 0.000000] kernel direct mapping tables up to 128000000 @ c000-12000
[ 0.000000] RAMDISK: 373e1000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fc7d8 0009C (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fc908 000F4 (v03 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000ffe9b456 05436 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cd9ffc00 00040
[ 0.000000] ACPI: SSDT 00000000ffea09ab 000AA (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fc9fc 00092 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fca8e 00028 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 00000000000fcab6 00096 (v32 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fcb4c 0003E (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fcb8a 00038 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000000fcde6 00032 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 00000000000fce18 00120 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fcbc2 00176 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000cd9ffc40 001B7 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000cda00049 001B7 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000cda00452 001B7 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000cda0085b 001B7 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000cda00c64 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000128000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000128000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] bootmap [0000000100005000 - 0000000100029fff] pages 25
[ 0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0128000000]
[ 0.000000] #0 [0001000000 - 0001899de4] TEXT DATA BSS ==> [0001000000 - 0001899de4]
[ 0.000000] #1 [00373e1000 - 0037ff0000] RAMDISK ==> [00373e1000 - 0037ff0000]
[ 0.000000] #2 [000189a000 - 000189a1f0] BRK ==> [000189a000 - 000189a1f0]
[ 0.000000] #3 [00000fe720 - 0000100000] BIOS reserved ==> [00000fe720 - 0000100000]
[ 0.000000] #4 [00000fe710 - 00000fe720] MP-table mpf ==> [00000fe710 - 00000fe720]
[ 0.000000] #5 [000009ec00 - 00000f0000] BIOS reserved ==> [000009ec00 - 00000f0000]
[ 0.000000] #6 [00000f030c - 00000fe710] BIOS reserved ==> [00000f030c - 00000fe710]
[ 0.000000] #7 [00000f0000 - 00000f030c] MP-table mpc ==> [00000f0000 - 00000f030c]
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #10 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #11 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000]
[ 0.000000] #13 [0100005000 - 010002a000] BOOTMAP ==> [0100005000 - 010002a000]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880100600000-ffff880103dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00128000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cd9ff
[ 0.000000] 0: 0x00100000 -> 0x00128000
[ 0.000000] On node 0 totalpages: 1005980
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 107 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 823863 pages, LIFO batch:31
[ 0.000000] Normal zone: 2240 pages used for memmap
[ 0.000000] Normal zone: 161600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cd9ff000 - 00000000cda00000
[ 0.000000] PM: Registered nosave memory: 00000000cda00000 - 00000000cda53000
[ 0.000000] PM: Registered nosave memory: 00000000cda53000 - 00000000cda54000
[ 0.000000] PM: Registered nosave memory: 00000000cda54000 - 00000000cda55000
[ 0.000000] PM: Registered nosave memory: 00000000cda55000 - 00000000cda56000
[ 0.000000] PM: Registered nosave memory: 00000000cda56000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s89192 r8192 d21400 u262144
[ 0.000000] pcpu-alloc: s89192 r8192 d21400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 989297
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-1-amd64 root=UUID=3b8f6a64-5899-462a-aec0-6ddefd878ecf ro fbcon=rotate:3 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3878108k/4849664k available (3056k kernel code, 825744k absent, 145812k reserved, 3770k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:472
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2660.005 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.01 BogoMIPS (lpj=10640020)
[ 0.004026] Security Framework initialized
[ 0.004031] SELinux: Disabled at boot.
[ 0.004289] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008089] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008904] Mount-cache hash table entries: 256
[ 0.009039] Initializing cgroup subsys ns
[ 0.009043] Initializing cgroup subsys cpuacct
[ 0.009047] Initializing cgroup subsys devices
[ 0.009049] Initializing cgroup subsys freezer
[ 0.009050] Initializing cgroup subsys net_cls
[ 0.009052] Initializing cgroup subsys blkio
[ 0.009084] CPU: Physical Processor ID: 0
[ 0.009085] CPU: Processor Core ID: 0
[ 0.009088] mce: CPU supports 6 MCE banks
[ 0.009095] CPU0: Thermal monitoring enabled (TM2)
[ 0.009098] using mwait in idle threads.
[ 0.009100] Performance Events: Core2 events, Intel PMU driver.
[ 0.009105] ... version: 2
[ 0.009106] ... bit width: 40
[ 0.009107] ... generic registers: 2
[ 0.009108] ... value mask: 000000ffffffffff
[ 0.009109] ... max period: 000000007fffffff
[ 0.009110] ... fixed-purpose events: 3
[ 0.009112] ... event mask: 0000000700000003
[ 0.009900] ACPI: Core revision 20100121
[ 0.247637] DMAR: Host address width 36
[ 0.247639] DMAR: DRHD base: 0x000000fedc1000 flags: 0x0
[ 0.247645] IOMMU fedc1000: ver 1:0 cap c9008020e30272 ecap 1000
[ 0.247647] DMAR: DRHD base: 0x000000fedc2000 flags: 0x0
[ 0.247650] IOMMU fedc2000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.247652] DMAR: DRHD base: 0x000000fedc3000 flags: 0x0
[ 0.247656] IOMMU fedc3000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.247657] DMAR: DRHD base: 0x000000fedc4000 flags: 0x1
[ 0.247661] IOMMU fedc4000: ver 1:0 cap c9008020630272 ecap 1000
[ 0.247662] DMAR: RMRR base: 0x000000cda58000 end: 0x000000cda6ffff
[ 0.247664] DMAR: RMRR base: 0x000000cdc00000 end: 0x000000cfffffff
[ 0.247665] DMAR: No ATSR found
[ 0.247672] Setting APIC routing to flat
[ 0.247979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.287671] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a
[ 0.288000] Booting Node 0, Processors #1 #2 #3
[ 0.560007] Brought up 4 CPUs
[ 0.560010] Total of 4 processors activated (21279.99 BogoMIPS).
[ 0.561682] devtmpfs: initialized
[ 0.564367] regulator: core version 0.5
[ 0.564367] NET: Registered protocol family 16
[ 0.564367] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.564367] ACPI: bus type pci registered
[ 0.564367] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.564367] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.583201] PCI: Using configuration type 1 for base access
[ 0.583489] bio: create slab <bio-0> at 0
[ 0.584370] ACPI: EC: Look up EC in DSDT
[ 0.620490] ACPI: BIOS _OSI(Linux) query ignored
[ 0.658266] ACPI: Interpreter enabled
[ 0.658270] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.658288] ACPI: Using IOAPIC for interrupt routing
[ 0.794605] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F (20100121/tbutils-314)
[ 0.800092] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.800095] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.809087] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.828184] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.828186] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.828188] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.828190] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
[ 0.828192] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.828194] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfec00000]
[ 0.828196] pci_root PNP0A03:00: host bridge window [mem 0xcdb00000-0xdfffffff]
[ 0.828198] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
[ 0.828200] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
[ 0.828202] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
[ 0.828204] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfeda7fff]
[ 0.828255] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.828258] pci 0000:00:01.0: PME# disabled
[ 0.828273] pci 0000:00:02.0: reg 10: [mem 0xfe800000-0xfebfffff 64bit]
[ 0.828278] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.828281] pci 0000:00:02.0: reg 20: [io 0xec90-0xec97]
[ 0.828303] pci 0000:00:02.1: reg 10: [mem 0xfe700000-0xfe7fffff 64bit]
[ 0.828355] pci 0000:00:03.0: reg 10: [mem 0xfeda6000-0xfeda600f 64bit]
[ 0.828408] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.828412] pci 0000:00:03.0: PME# disabled
[ 0.828432] pci 0000:00:03.2: reg 10: [io 0xfe80-0xfe87]
[ 0.828436] pci 0000:00:03.2: reg 14: [io 0xfe90-0xfe93]
[ 0.828439] pci 0000:00:03.2: reg 18: [io 0xfea0-0xfea7]
[ 0.828443] pci 0000:00:03.2: reg 1c: [io 0xfeb0-0xfeb3]
[ 0.828446] pci 0000:00:03.2: reg 20: [io 0xfef0-0xfeff]
[ 0.828478] pci 0000:00:03.3: reg 10: [io 0xec98-0xec9f]
[ 0.828483] pci 0000:00:03.3: reg 14: [mem 0xfe6d8000-0xfe6d8fff]
[ 0.828562] pci 0000:00:19.0: reg 10: [mem 0xfe6e0000-0xfe6fffff]
[ 0.828566] pci 0000:00:19.0: reg 14: [mem 0xfe6d9000-0xfe6d9fff]
[ 0.828571] pci 0000:00:19.0: reg 18: [io 0xecc0-0xecdf]
[ 0.828601] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.828604] pci 0000:00:19.0: PME# disabled
[ 0.828640] pci 0000:00:1a.0: reg 20: [io 0xff20-0xff3f]
[ 0.828691] pci 0000:00:1a.1: reg 20: [io 0xff00-0xff1f]
[ 0.828743] pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.828794] pci 0000:00:1a.7: reg 10: [mem 0xfe6da000-0xfe6da3ff]
[ 0.828838] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.828842] pci 0000:00:1a.7: PME# disabled
[ 0.828868] pci 0000:00:1b.0: reg 10: [mem 0xfe6dc000-0xfe6dffff 64bit]
[ 0.828901] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.828903] pci 0000:00:1b.0: PME# disabled
[ 0.828954] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.828957] pci 0000:00:1c.0: PME# disabled
[ 0.829008] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.829011] pci 0000:00:1c.1: PME# disabled
[ 0.829055] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
[ 0.829107] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
[ 0.829159] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
[ 0.829210] pci 0000:00:1d.7: reg 10: [mem 0xff980000-0xff9803ff]
[ 0.829254] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.829257] pci 0000:00:1d.7: PME# disabled
[ 0.829388] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
[ 0.829393] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
[ 0.829397] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
[ 0.829401] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
[ 0.829405] pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfedf]
[ 0.829409] pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9707ff]
[ 0.829434] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.829436] pci 0000:00:1f.2: PME# disabled
[ 0.829457] pci 0000:00:1f.3: reg 10: [mem 0xfe6db000-0xfe6db0ff 64bit]
[ 0.829468] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
[ 0.829501] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.829504] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.829506] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.829509] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.829540] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.829543] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.829546] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.829551] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.829582] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.829585] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.829588] pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.829592] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.829642] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.829645] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.829648] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.829653] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.829655] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.829657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.829659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.829661] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
[ 0.829663] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.829664] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000] (subtractive decode)
[ 0.829666] pci 0000:00:1e.0: bridge window [mem 0xcdb00000-0xdfffffff] (subtractive decode)
[ 0.829668] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive decode)
[ 0.829670] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
[ 0.829672] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
[ 0.829674] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode)
[ 0.829689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.830204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.830546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.830833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.831119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 2.877816] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.878567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.879318] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.880107] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.880852] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.881615] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.882365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.883115] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.883348] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.883358] vgaarb: loaded
[ 2.883368] PCI: Using ACPI for IRQ routing
[ 2.883368] PCI: pci_cache_line_size set to 64 bytes
[ 2.883368] pci 0000:00:03.0: no compatible bridge window for [mem 0xfeda6000-0xfeda600f 64bit]
[ 2.883368] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
[ 2.883368] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 2.883368] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 2.883368] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 2.883368] reserve RAM buffer: 00000000cd9ffc00 - 00000000cfffffff
[ 2.883368] alloc irq_desc for 24 on node 0
[ 2.883368] alloc kstat_irqs on node 0
[ 2.883368] alloc irq_desc for 25 on node 0
[ 2.883368] alloc kstat_irqs on node 0
[ 2.883368] alloc irq_desc for 26 on node 0
[ 2.883368] alloc kstat_irqs on node 0
[ 2.883368] alloc irq_desc for 27 on node 0
[ 2.883368] alloc kstat_irqs on node 0
[ 2.883368] alloc irq_desc for 28 on node 0
[ 2.883368] alloc kstat_irqs on node 0
[ 2.883368] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 2.883368] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 2.883368] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.888018] hpet: hpet2 irq 24 for MSI
[ 2.888025] hpet: hpet3 irq 25 for MSI
[ 2.888044] hpet: hpet4 irq 26 for MSI
[ 2.892027] hpet: hpet5 irq 27 for MSI
[ 2.892038] Switching to clocksource tsc
[ 2.893320] pnp: PnP ACPI init
[ 2.893337] ACPI: bus type pnp registered
[ 2.959748] pnp: PnP ACPI: found 9 devices
[ 2.959750] ACPI: ACPI bus type pnp unregistered
[ 2.959761] system 00:01: [io 0x0800-0x085f] has been reserved
[ 2.959764] system 00:01: [io 0x0c00-0x0c7f] has been reserved
[ 2.959767] system 00:01: [io 0x0860-0x08ff] has been reserved
[ 2.964548] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 2.964552] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 2.964556] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.964558] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 2.964561] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0400000-0xf04007ff]
[ 2.964566] pci 0000:00:1f.2: BAR 5: set to [mem 0xf0400000-0xf04007ff] (PCI address [0xf0400000-0xf04007ff]
[ 2.964570] pci 0000:00:03.0: BAR 0: assigned [mem 0xf0400800-0xf040080f 64bit]
[ 2.964577] pci 0000:00:03.0: BAR 0: set to [mem 0xf0400800-0xf040080f 64bit] (PCI address [0xf0400800-0xf040080f]
[ 2.964581] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.964582] pci 0000:00:01.0: bridge window [io disabled]
[ 2.964586] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 2.964588] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 2.964592] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.964595] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 2.964599] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 2.964603] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 2.964609] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 2.964611] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 2.964616] pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff]
[ 2.964620] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 2.964625] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 2.964627] pci 0000:00:1e.0: bridge window [io disabled]
[ 2.964631] pci 0000:00:1e.0: bridge window [mem disabled]
[ 2.964634] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.964645] alloc irq_desc for 16 on node -1
[ 2.964647] alloc kstat_irqs on node -1
[ 2.964653] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.964657] pci 0000:00:01.0: setting latency timer to 64
[ 2.964664] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.964668] pci 0000:00:1c.0: setting latency timer to 64
[ 2.964674] alloc irq_desc for 17 on node -1
[ 2.964676] alloc kstat_irqs on node -1
[ 2.964680] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.964683] pci 0000:00:1c.1: setting latency timer to 64
[ 2.964689] pci 0000:00:1e.0: setting latency timer to 64
[ 2.964692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.964695] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.964697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.964699] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[ 2.964701] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 2.964703] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
[ 2.964705] pci_bus 0000:00: resource 10 [mem 0xcdb00000-0xdfffffff]
[ 2.964708] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
[ 2.964710] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
[ 2.964712] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 2.964714] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
[ 2.964716] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 2.964719] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 2.964721] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 2.964723] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 2.964726] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 2.964728] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 2.964730] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 2.964732] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 2.964734] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 2.964736] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.964738] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
[ 2.964740] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
[ 2.964743] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000]
[ 2.964745] pci_bus 0000:04: resource 10 [mem 0xcdb00000-0xdfffffff]
[ 2.964747] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
[ 2.964749] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
[ 2.964751] pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 2.964753] pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
[ 2.964780] NET: Registered protocol family 2
[ 2.964919] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.965868] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.968801] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.969196] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.969199] TCP reno registered
[ 2.969209] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.969245] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.969405] NET: Registered protocol family 1
[ 2.969426] pci 0000:00:02.0: Boot video device
[ 2.969582] PCI: CLS 64 bytes, default 64
[ 2.969631] Unpacking initramfs...
[ 3.271088] Freeing initrd memory: 12348k freed
[ 3.274839] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.274845] Placing 64MB software IO TLB between ffff880001bdd000 - ffff880005bdd000
[ 3.274847] software IO TLB at phys 0x1bdd000 - 0x5bdd000
[ 3.274897] Simple Boot Flag at 0x7a set to 0x80
[ 3.275310] audit: initializing netlink socket (disabled)
[ 3.275322] type=2000 audit(1278929601.272:1): initialized
[ 3.275654] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.277116] VFS: Disk quotas dquot_6.5.2
[ 3.277168] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.277256] msgmni has been set to 7598
[ 3.277474] alg: No test for stdrng (krng)
[ 3.277530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.277534] io scheduler noop registered
[ 3.277536] io scheduler deadline registered
[ 3.277592] io scheduler cfq registered (default)
[ 3.277673] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.277694] alloc irq_desc for 29 on node -1
[ 3.277695] alloc kstat_irqs on node -1
[ 3.277704] pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
[ 3.277755] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.277782] alloc irq_desc for 30 on node -1
[ 3.277783] alloc kstat_irqs on node -1
[ 3.277790] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 3.277860] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.277886] alloc irq_desc for 31 on node -1
[ 3.277888] alloc kstat_irqs on node -1
[ 3.277894] pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X
[ 3.277976] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
[ 3.277985] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
[ 3.277989] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
[ 3.277993] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 3.277996] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[ 3.277999] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[ 3.278003] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[ 3.278005] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
[ 3.278008] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
[ 3.279571] Linux agpgart interface v0.103
[ 3.279599] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 3.280903] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.296043] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.296093] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.296201] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.296514] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.296571] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.296620] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
[ 3.296723] PNP: No PS/2 controller found. Probing ports directly.
[ 3.299438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.299446] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.299531] mice: PS/2 mouse device common for all mice
[ 3.299565] rtc_cmos 00:05: RTC can wake from S4
[ 3.299594] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.299614] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 3.299622] cpuidle: using governor ladder
[ 3.299623] cpuidle: using governor menu
[ 3.299627] No iBFT detected.
[ 3.299813] TCP cubic registered
[ 3.299900] NET: Registered protocol family 10
[ 3.300182] lo: Disabled Privacy Extensions
[ 3.300327] Mobile IPv6
[ 3.300329] NET: Registered protocol family 17
[ 3.300386] PM: Resume from disk failed.
[ 3.300393] registered taskstats version 1
[ 3.300635] rtc_cmos 00:05: setting system clock to 2010-07-12 10:13:22 UTC (1278929602)
[ 3.300658] Initalizing network drop monitor service
[ 3.300698] Freeing unused kernel memory: 588k freed
[ 3.300792] Write protecting the kernel read-only data: 6144k
[ 3.300931] Freeing unused kernel memory: 1020k freed
[ 3.301169] Freeing unused kernel memory: 864k freed
[ 3.486958] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.486960] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 3.486991] alloc irq_desc for 21 on node -1
[ 3.486992] alloc kstat_irqs on node -1
[ 3.487001] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.487013] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.487112] alloc irq_desc for 32 on node -1
[ 3.487114] alloc kstat_irqs on node -1
[ 3.487123] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 3.487513] usbcore: registered new interface driver usbfs
[ 3.487605] usbcore: registered new interface driver hub
[ 3.498443] usbcore: registered new device driver usb
[ 3.519136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.519145] ACPI: Power Button [VBTN]
[ 3.519199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.519203] ACPI: Power Button [PWRF]
[ 3.520646] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.522567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.522570] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.531155] SCSI subsystem initialized
[ 3.537297] [drm] Initialized drm 1.1.0 20060810
[ 3.549062] libata version 3.00 loaded.
[ 3.566948] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.566952] pci 0000:00:02.0: setting latency timer to 64
[ 3.599143] alloc irq_desc for 33 on node -1
[ 3.599146] alloc kstat_irqs on node -1
[ 3.599156] pci 0000:00:02.0: irq 33 for MSI/MSI-X
[ 3.599186] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.772822] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:19:1c:d0:89
[ 3.772824] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.772856] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff
[ 3.772877] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.772882] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.772885] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.772903] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.772931] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 3.772966] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.772967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.772969] usb usb1: Product: UHCI Host Controller
[ 3.772970] usb usb1: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.772972] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.773055] hub 1-0:1.0: USB hub found
[ 3.773059] hub 1-0:1.0: 2 ports detected
[ 3.773133] alloc irq_desc for 22 on node -1
[ 3.773137] alloc kstat_irqs on node -1
[ 3.773146] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.773186] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.773190] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.773210] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 3.773240] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.777125] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 3.777140] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000
[ 3.792510] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.792531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.792533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.792535] usb usb2: Product: EHCI Host Controller
[ 3.792537] usb usb2: Manufacturer: Linux 2.6.34-1-amd64 ehci_hcd
[ 3.792539] usb usb2: SerialNumber: 0000:00:1a.7
[ 3.792640] hub 2-0:1.0: USB hub found
[ 3.792644] hub 2-0:1.0: 6 ports detected
[ 3.792718] ahci 0000:00:1f.2: version 3.0
[ 3.792728] alloc irq_desc for 18 on node -1
[ 3.792730] alloc kstat_irqs on node -1
[ 3.792735] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.792768] alloc irq_desc for 34 on node -1
[ 3.792770] alloc kstat_irqs on node -1
[ 3.792778] ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
[ 3.792835] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
[ 3.792838] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
[ 3.792842] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.824799] scsi0 : ahci
[ 3.824888] scsi1 : ahci
[ 3.824954] scsi2 : ahci
[ 3.825013] scsi3 : ahci
[ 3.825073] scsi4 : ahci
[ 3.825128] scsi5 : ahci
[ 3.826695] ata1: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400100 irq 34
[ 3.826699] ata2: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400180 irq 34
[ 3.826702] ata3: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400200 irq 34
[ 3.826704] ata4: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400280 irq 34
[ 3.826706] ata5: DUMMY
[ 3.826709] ata6: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400380 irq 34
[ 3.826769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.826777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.826780] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.826790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 3.826825] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 3.826860] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.826862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.826864] usb usb3: Product: UHCI Host Controller
[ 3.826866] usb usb3: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.826868] usb usb3: SerialNumber: 0000:00:1a.1
[ 3.826956] hub 3-0:1.0: USB hub found
[ 3.826959] hub 3-0:1.0: 2 ports detected
[ 3.827029] alloc irq_desc for 23 on node -1
[ 3.827031] alloc kstat_irqs on node -1
[ 3.827037] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.827052] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.827055] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.827064] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.827086] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.830951] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.830964] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
[ 3.844016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.844034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.844037] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844039] usb usb4: Product: EHCI Host Controller
[ 3.844041] usb usb4: Manufacturer: Linux 2.6.34-1-amd64 ehci_hcd
[ 3.844043] usb usb4: SerialNumber: 0000:00:1d.7
[ 3.844136] hub 4-0:1.0: USB hub found
[ 3.844141] hub 4-0:1.0: 6 ports detected
[ 3.844222] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.844227] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.844230] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.844239] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.844264] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[ 3.844293] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.844296] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844298] usb usb5: Product: UHCI Host Controller
[ 3.844299] usb usb5: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.844301] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.844394] hub 5-0:1.0: USB hub found
[ 3.844397] hub 5-0:1.0: 2 ports detected
[ 3.844459] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.844463] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.844466] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.844471] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.844490] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 3.844514] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.844516] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844517] usb usb6: Product: UHCI Host Controller
[ 3.844518] usb usb6: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.844520] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.844579] hub 6-0:1.0: USB hub found
[ 3.844582] hub 6-0:1.0: 2 ports detected
[ 3.844624] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.844628] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.844631] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.844640] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.844661] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 3.844684] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.844686] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844688] usb usb7: Product: UHCI Host Controller
[ 3.844689] usb usb7: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.844690] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.844752] hub 7-0:1.0: USB hub found
[ 3.844755] hub 7-0:1.0: 2 ports detected
[ 3.844797] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.844801] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.844803] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.844808] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.844833] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 3.844857] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.844859] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844861] usb usb8: Product: UHCI Host Controller
[ 3.844862] usb usb8: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 3.844863] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.844924] hub 8-0:1.0: USB hub found
[ 3.844927] hub 8-0:1.0: 2 ports detected
[ 4.104014] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 4.140017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.140033] ata4: SATA link down (SStatus 4 SControl 300)
[ 4.140048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.141105] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7200S, 102A, max UDMA/100
[ 4.142511] ata2.00: configured for UDMA/100
[ 4.144018] ata3: SATA link down (SStatus 4 SControl 300)
[ 4.144036] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.146402] ata1.00: ATA-7: SAMSUNG HD252HJ, 1AC01118, max UDMA7
[ 4.146405] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.152886] ata1.00: configured for UDMA/133
[ 4.152984] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD252HJ 1AC0 PQ: 0 ANSI: 5
[ 4.154570] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7200S 102A PQ: 0 ANSI: 5
[ 4.179256] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.179296] sd 0:0:0:0: [sda] Write Protect is off
[ 4.179297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.179314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.179430] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.180472] Uniform CD-ROM driver Revision: 3.20
[ 4.180573] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.194758] sda1 sda2 sda3 sda4
[ 4.207811] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.212819] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.212846] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.236812] usb 2-3: New USB device found, idVendor=0409, idProduct=0059
[ 4.236815] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.236966] hub 2-3:1.0: USB hub found
[ 4.237065] hub 2-3:1.0: 4 ports detected
[ 4.408023] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 4.471671] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 4.471676] PM: Marking nosave pages: 00000000cd9ff000 - 0000000100000000
[ 4.472918] PM: Basic memory bitmaps created
[ 4.492229] PM: Basic memory bitmaps freed
[ 4.526025] kjournald starting. Commit interval 5 seconds
[ 4.526032] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 4.606516] usb 4-2: New USB device found, idVendor=0644, idProduct=0200
[ 4.606520] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.606522] usb 4-2: Product: CA-200
[ 4.606524] usb 4-2: Manufacturer: TEAC
[ 4.844013] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 5.023854] usb 3-2: New USB device found, idVendor=04b4, idProduct=8081
[ 5.023858] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.023860] usb 3-2: Product: PS/2 to USB Adapter
[ 5.023862] usb 3-2: Manufacturer: Cypress
[ 5.963286] udev: starting version 158
[ 6.689520] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.794464] ACPI: WMI: Mapper loaded
[ 6.817584] Monitor-Mwait will be used to enter C-1 state
[ 6.923027] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.050349] parport_pc 00:06: reported by Plug and Play ACPI
[ 7.050427] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.064797] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.186531] input: Dell WMI hotkeys as /devices/virtual/input/input3
[ 7.269256] usbcore: registered new interface driver hiddev
[ 7.284081] input: Cypress PS/2 to USB Adapter as /devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2:1.0/input/input4
[ 7.284168] generic-usb 0003:04B4:8081.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress PS/2 to USB Adapter] on usb-0000:00:1a.1-2/input0
[ 7.300042] input: Cypress PS/2 to USB Adapter as /devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2:1.1/input/input5
[ 7.300112] generic-usb 0003:04B4:8081.0002: input,hidraw1: USB HID v1.00 Mouse [Cypress PS/2 to USB Adapter] on usb-0000:00:1a.1-2/input1
[ 7.300135] usbcore: registered new interface driver usbhid
[ 7.300136] usbhid: USB HID core driver
[ 7.315196] Initializing USB Mass Storage driver...
[ 7.315468] scsi6 : usb-storage 4-2:1.0
[ 7.315661] usbcore: registered new interface driver usb-storage
[ 7.315662] USB Mass Storage support registered.
[ 7.499135] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.499219] alloc irq_desc for 35 on node -1
[ 7.499221] alloc kstat_irqs on node -1
[ 7.499230] HDA Intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 7.499251] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.996822] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.322259] scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
[ 8.325882] scsi 6:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
[ 8.329627] scsi 6:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
[ 8.332750] scsi 6:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
[ 8.333180] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 8.333337] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 8.333581] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 8.333849] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 8.350612] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 8.358986] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8.363238] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 8.367115] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 8.810363] Adding 3148736k swap on /dev/sda2. Priority:-1 extents:1 across:3148736k
[ 9.227787] EXT3-fs (sda3): using internal journal
[ 9.452379] loop: module loaded
[ 9.702371] device-mapper: uevent: version 1.0.3
[ 9.702638] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 11.030018] fuse init (API version 7.13)
[ 11.097631] kjournald starting. Commit interval 5 seconds
[ 11.097746] EXT3-fs (sda1): using internal journal
[ 11.097749] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 11.121233] kjournald starting. Commit interval 5 seconds
[ 11.121372] EXT3-fs (sda4): using internal journal
[ 11.121376] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 12.816414] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 12.872286] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
[ 12.872784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.333788] tun: Universal TUN/TAP device driver, 1.6
[ 14.333791] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 15.503735] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.525160] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.525313] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 15.525315] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 15.525317] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.944914] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 15.945365] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.774025] Bridge firewalling registered
[ 20.259587] device tap0 entered promiscuous mode
[ 20.261021] tapbr: port 1(tap0) entering learning state
[ 20.306644] device tap1 entered promiscuous mode
[ 20.307689] tapbr: port 2(tap1) entering learning state
[ 20.350346] device tap2 entered promiscuous mode
[ 20.351387] tapbr: port 3(tap2) entering learning state
[ 20.386389] device tap3 entered promiscuous mode
[ 20.387434] tapbr: port 4(tap3) entering learning state
[ 20.434348] device tap4 entered promiscuous mode
[ 20.435416] tapbr: port 5(tap4) entering learning state
[ 20.470607] device tap5 entered promiscuous mode
[ 20.471669] tapbr: port 6(tap5) entering learning state
[ 20.530477] device tap6 entered promiscuous mode
[ 20.531579] tapbr: port 7(tap6) entering learning state
[ 20.570589] device tap7 entered promiscuous mode
[ 20.571639] tapbr: port 8(tap7) entering learning state
[ 20.622351] device tap8 entered promiscuous mode
[ 20.623398] tapbr: port 9(tap8) entering learning state
[ 20.662355] device tap9 entered promiscuous mode
[ 20.663409] tapbr: port 10(tap9) entering learning state
[ 27.808756] tapbr: no IPv6 routers present
[ 30.768255] tap5: no IPv6 routers present
[ 30.804254] tap8: no IPv6 routers present
[ 30.816254] tap1: no IPv6 routers present
[ 30.832755] tap0: no IPv6 routers present
[ 30.900254] tap7: no IPv6 routers present
[ 31.048255] tap2: no IPv6 routers present
[ 31.092254] tap3: no IPv6 routers present
[ 31.300254] tap9: no IPv6 routers present
[ 31.392255] tap4: no IPv6 routers present
[ 31.520007] tap6: no IPv6 routers present
[ 35.260757] tapbr: port 1(tap0) entering forwarding state
[ 35.308257] tapbr: port 2(tap1) entering forwarding state
[ 35.352255] tapbr: port 3(tap2) entering forwarding state
[ 35.388256] tapbr: port 4(tap3) entering forwarding state
[ 35.436255] tapbr: port 5(tap4) entering forwarding state
[ 35.472255] tapbr: port 6(tap5) entering forwarding state
[ 35.528008] tapbr: port 7(tap6) entering forwarding state
[ 35.572255] tapbr: port 8(tap7) entering forwarding state
[ 35.624255] tapbr: port 9(tap8) entering forwarding state
[ 35.664255] tapbr: port 10(tap9) entering forwarding state
[ 50.017252] tapbr: port 1(tap0) entering disabled state
[ 50.032298] device tap0 left promiscuous mode
[ 50.032301] tapbr: port 1(tap0) entering disabled state
[ 50.046619] device tap0 entered promiscuous mode
[ 50.047691] tapbr: port 1(tap0) entering learning state
[ 50.064969] tapbr: port 2(tap1) entering disabled state
[ 50.088042] device tap1 left promiscuous mode
[ 50.088045] tapbr: port 2(tap1) entering disabled state
[ 50.102370] device tap1 entered promiscuous mode
[ 50.103428] tapbr: port 2(tap1) entering learning state
[ 50.116950] tapbr: port 3(tap2) entering disabled state
[ 50.132040] device tap2 left promiscuous mode
[ 50.132043] tapbr: port 3(tap2) entering disabled state
[ 50.146363] device tap2 entered promiscuous mode
[ 50.147426] tapbr: port 3(tap2) entering learning state
[ 50.160944] tapbr: port 4(tap3) entering disabled state
[ 50.172043] device tap3 left promiscuous mode
[ 50.172045] tapbr: port 4(tap3) entering disabled state
[ 50.186363] device tap3 entered promiscuous mode
[ 50.187425] tapbr: port 4(tap3) entering learning state
[ 50.200947] tapbr: port 5(tap4) entering disabled state
[ 50.216044] device tap4 left promiscuous mode
[ 50.216047] tapbr: port 5(tap4) entering disabled state
[ 50.230363] device tap4 entered promiscuous mode
[ 50.231421] tapbr: port 5(tap4) entering learning state
[ 50.248968] tapbr: port 6(tap5) entering disabled state
[ 50.272042] device tap5 left promiscuous mode
[ 50.272044] tapbr: port 6(tap5) entering disabled state
[ 50.286376] device tap5 entered promiscuous mode
[ 50.287447] tapbr: port 6(tap5) entering learning state
[ 50.304967] tapbr: port 7(tap6) entering disabled state
[ 50.328042] device tap6 left promiscuous mode
[ 50.328044] tapbr: port 7(tap6) entering disabled state
[ 50.342374] device tap6 entered promiscuous mode
[ 50.343443] tapbr: port 7(tap6) entering learning state
[ 50.356946] tapbr: port 8(tap7) entering disabled state
[ 50.372040] device tap7 left promiscuous mode
[ 50.372043] tapbr: port 8(tap7) entering disabled state
[ 50.386382] device tap7 entered promiscuous mode
[ 50.387448] tapbr: port 8(tap7) entering learning state
[ 50.400948] tapbr: port 9(tap8) entering disabled state
[ 50.416040] device tap8 left promiscuous mode
[ 50.416043] tapbr: port 9(tap8) entering disabled state
[ 50.430380] device tap8 entered promiscuous mode
[ 50.431440] tapbr: port 9(tap8) entering learning state
[ 50.444946] tapbr: port 10(tap9) entering disabled state
[ 50.460039] device tap9 left promiscuous mode
[ 50.460042] tapbr: port 10(tap9) entering disabled state
[ 50.474393] device tap9 entered promiscuous mode
[ 50.475451] tapbr: port 10(tap9) entering learning state
[ 51.709349] RPC: Registered udp transport module.
[ 51.709352] RPC: Registered tcp transport module.
[ 51.709354] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 51.792422] Slow work thread pool: Starting up
[ 51.792472] Slow work thread pool: Ready
[ 51.792512] FS-Cache: Loaded
[ 51.855236] FS-Cache: Netfs 'nfs' registered for caching
[ 51.925673] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 960
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0Y958C
board_version: A00
** Loaded modules:
Module Size Used by
binfmt_misc 6558 1
kvm_intel 39607 0
kvm 223909 1 kvm_intel
ppdev 5507 0
lp 8190 0
battery 5518 0
nfsd 253519 13
exportfs 3178 1 nfsd
nfs 240208 0
lockd 58476 2 nfsd,nfs
fscache 29486 1 nfs
nfs_acl 2039 2 nfsd,nfs
auth_rpcgss 33596 2 nfsd,nfs
sunrpc 161819 13 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 53994 0
stp 1464 1 bridge
xt_tcpudp 2327 1
xt_conntrack 2399 6
xt_state 1311 4
xt_dscp 1635 0
xt_DSCP 2019 0
xt_CLASSIFY 933 0
ipt_LOG 4542 0
ipt_REJECT 1977 0
xt_owner 1087 0
nf_conntrack_tftp 3337 0
nf_nat_ftp 1604 0
nf_conntrack_ftp 5412 1 nf_nat_ftp
nf_nat_sip 5436 0
nf_conntrack_sip 16711 1 nf_nat_sip
nf_nat_h323 5247 0
nf_conntrack_h323 36966 1 nf_nat_h323
nf_nat_pptp 2138 0
nf_conntrack_pptp 3884 1 nf_nat_pptp
nf_conntrack_proto_gre 3483 1 nf_conntrack_pptp
nf_nat_proto_gre 1285 1 nf_nat_pptp
nf_nat_irc 1406 0
nf_conntrack_irc 3371 1 nf_nat_irc
iptable_filter 1376 1
iptable_nat 3683 1
ipt_MASQUERADE 1514 1
nf_nat 13757 8 nf_nat_ftp,nf_nat_sip,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,iptable_nat,ipt_MASQUERADE
xt_multiport 2275 0
xt_iprange 1441 0
nf_conntrack_ipv4 9745 13 iptable_nat,nf_nat
nf_conntrack 47409 18 xt_conntrack,xt_state,nf_conntrack_tftp,nf_nat_ftp,nf_conntrack_ftp,nf_nat_sip,nf_conntrack_sip,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_irc,nf_conntrack_irc,iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1211 1 nf_conntrack_ipv4
ip_tables 14274 2 iptable_filter,iptable_nat
x_tables 13519 15 xt_tcpudp,xt_conntrack,xt_state,xt_dscp,xt_DSCP,xt_CLASSIFY,ipt_LOG,ipt_REJECT,xt_owner,iptable_filter,iptable_nat,ipt_MASQUERADE,xt_multiport,xt_iprange,ip_tables
tun 12166 10
fuse 50697 1
dm_mod 55429 0
snd_pcm_oss 31980 0
snd_mixer_oss 12687 1 snd_pcm_oss
coretemp 4235 0
loop 12330 0
snd_hda_codec_analog 65216 1
snd_hda_intel 19530 0
snd_hda_codec 64924 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5468 1 snd_hda_codec
snd_pcm 61665 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_seq 42806 0
snd_timer 16304 2 snd_pcm,snd_seq
snd_seq_device 4515 1 snd_seq
snd 46979 10 snd_pcm_oss,snd_mixer_oss,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
usb_storage 39287 0
usbhid 33354 0
dell_wmi 2579 0
soundcore 4838 1 snd
hid 63831 1 usbhid
pcspkr 1723 0
parport_pc 18869 1
parport 25598 3 ppdev,lp,parport_pc
serio_raw 3726 0
i2c_i801 7822 0
snd_page_alloc 6289 2 snd_hda_intel,snd_pcm
psmouse 45509 0
processor 29010 0
wmi 5443 1 dell_wmi
evdev 7426 4
dcdbas 5072 0
tpm_tis 7349 0
tpm 9843 1 tpm_tis
tpm_bios 4629 1 tpm
ext3 106594 3
jbd 37179 1 ext3
mbcache 5152 1 ext3
fan 3306 0
sg 19141 0
sd_mod 30469 5
crc_t10dif 1284 1 sd_mod
sr_mod 12711 0
cdrom 29769 1 sr_mod
i915 250603 0
ata_generic 2895 0
ahci 34034 4
drm_kms_helper 20107 1 i915
libata 133830 2 ata_generic,ahci
drm 144377 2 i915,drm_kms_helper
i2c_algo_bit 4297 1 i915
ehci_hcd 30813 0
uhci_hcd 18410 0
button 4706 1 i915
i2c_core 16076 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 18189 1 i915
thermal 12046 0
thermal_sys 12036 4 processor,fan,video,thermal
scsi_mod 125191 5 usb_storage,sg,sd_mod,sr_mod,libata
output 1732 1 video
e1000e 110364 0
usbcore 125665 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
nls_base 6369 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec90 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0400800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: <access denied>
Kernel modules: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe300000-fe3fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 34
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at f0400000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
** USB devices:
Bus 002 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04b4:8081 Cypress Semiconductor Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader CA200/B/S
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (900, 'stable'), (700, 'testing'), (500, 'oldstable'), (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.34-1-amd64 depends on:
ii debconf [debconf 1.5.24 Debian configuration management sy
ii initramfs-tools 0.92o tools for generating an initramfs
ii linux-base 2.6.34-1~experimental.2 Linux image base package
ii module-init-tool 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.34-1-amd64 recommends:
ii firmware-linux-f 2.6.34-1~experimental.2 Binary firmware for various driver
Versions of packages linux-image-2.6.34-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.34 <none> (no description available)
Versions of packages linux-image-2.6.34-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.34-1-amd64/postinst/missing-firmware-2.6.34-1-amd64:
linux-image-2.6.34-1-amd64/prerm/would-invalidate-boot-loader-2.6.34-1-amd64: true
linux-image-2.6.34-1-amd64/postinst/depmod-error-initrd-2.6.34-1-amd64: false
linux-image-2.6.34-1-amd64/postinst/bootloader-test-error-2.6.34-1-amd64:
linux-image-2.6.34-1-amd64/postinst/bootloader-error-2.6.34-1-amd64:
linux-image-2.6.34-1-amd64/prerm/removing-running-kernel-2.6.34-1-amd64: true
--- End Message ---