Your message dated Sat, 8 Jun 2013 12:16:25 +0200 with message-id <20130608101625.GD4796@pisco.westfalen.local> and subject line Closing has caused the Debian Bug report #456273, regarding Kernel panic on boot with linux-image-2.6.18-5 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 456273: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=456273 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Kernel panic on boot with linux-image-2.6.18-5
- From: Paul Gear <paul@gear.dyndns.org>
- Date: Fri, 14 Dec 2007 17:56:29 +1000
- Message-id: <4762372D.1070907@gear.dyndns.org>
Package: linux-image-2.6.18-5-amd64 Version: 2.6.18.dfsg.1-13etch5 (This bug *might* be a duplicate of #446744) Ever since etch was upgraded to linux-image-2.6.18-5, my system has been unable to boot. It kernel panics on boot, but not during the mount of the root file system. I'm unable to work out what exactly in the boot process is the problem, and because i'm unable to capture the output of the panic, it's infeasible to type it all in here. Following are some relevant items about my kernel config and hardware: /proc/cmdline: root=/dev/mapper/adam00-lv01 ro all-generic-ide irqpoll CPU: Intel Core 2 Duo E6300 /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping : 6 cpu MHz : 1864.848 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips : 3739.10 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping : 6 cpu MHz : 1864.848 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips : 3729.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: mobo: Intel DG965WH lspci -nv: 00:00.0 0600: 8086:29a0 (rev 02) Subsystem: 8086:514d Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: e8300000-e83fffff Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff Capabilities: [88] Subsystem: 8086:0000 Capabilities: [80] Power Management version 3 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0 00:02.0 0380: 8086:29a2 (rev 02) Subsystem: 8086:514d Flags: bus master, fast devsel, latency 0 Memory at e8200000 (32-bit, non-prefetchable) [size=1M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 4110 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:03.0 0780: 8086:29a4 (rev 02) Subsystem: 8086:514d Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e8426100 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- 00:19.0 0200: 8086:104b (rev 02) Subsystem: 8086:0001 Flags: bus master, fast devsel, latency 0, IRQ 106 Memory at e8400000 (32-bit, non-prefetchable) [size=128K] Memory at e8424000 (32-bit, non-prefetchable) [size=4K] I/O ports at 40e0 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ 00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 40c0 [size=32] 00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 82 I/O ports at 40a0 [size=32] 00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 185 Memory at e8425c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1b.0 0403: 8086:284b (rev 02) Subsystem: 8086:2504 Flags: bus master, fast devsel, latency 0, IRQ 98 Memory at e8420000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e8500000-e85fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:283f Capabilities: [a0] Power Management version 2 00:1c.1 0604: 8086:2841 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e8100000-e81fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2841 Capabilities: [a0] Power Management version 2 00:1c.2 0604: 8086:2843 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: e8600000-e86fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2843 Capabilities: [a0] Power Management version 2 00:1c.3 0604: 8086:2845 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: e8700000-e87fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2845 Capabilities: [a0] Power Management version 2 00:1c.4 0604: 8086:2847 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Memory behind bridge: e8800000-e88fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2847 Capabilities: [a0] Power Management version 2 00:1d.0 0c03: 8086:2830 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 66 I/O ports at 4080 [size=32] 00:1d.1 0c03: 8086:2831 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at 4060 [size=32] 00:1d.2 0c03: 8086:2832 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 185 I/O ports at 4040 [size=32] 00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20 [EHCI]) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0, IRQ 66 Memory at e8425800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 0604: 8086:244e (rev f2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: e8000000-e80fffff Prefetchable memory behind bridge: 00000000e8900000-00000000e89fffff Capabilities: [50] Subsystem: 8086:514d 00:1f.0 0601: 8086:2812 (rev 02) Subsystem: 8086:514d Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 0106: 8086:2821 (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: 8086:514d Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 90 I/O ports at 4108 [size=8] I/O ports at 411c [size=4] I/O ports at 4100 [size=8] I/O ports at 4118 [size=4] I/O ports at 4020 [size=32] Memory at e8425000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] #12 [0010] 00:1f.3 0c05: 8086:283e (rev 02) Subsystem: 8086:514d Flags: medium devsel, IRQ 82 Memory at e8426000 (32-bit, non-prefetchable) [size=256] I/O ports at 4000 [size=32] 01:00.0 0300: 1002:5b60 (prog-if 00 [VGA]) Subsystem: 1458:2102 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e0000000 (32-bit, prefetchable) [size=128M] I/O ports at 3000 [size=256] Memory at e8310000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e8320000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- 01:00.1 0380: 1002:5b70 Subsystem: 1458:2103 Flags: bus master, fast devsel, latency 0 Memory at e8300000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 03:00.0 0101: 11ab:6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: 11ab:6101 Flags: bus master, fast devsel, latency 0, IRQ 10 I/O ports at 2018 [size=8] I/O ports at 2024 [size=4] I/O ports at 2010 [size=8] I/O ports at 2020 [size=4] I/O ports at 2000 [size=16] Memory at e8100000 (32-bit, non-prefetchable) [size=512] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint IRQ 0 07:00.0 0200: 10ec:8139 (rev 10) Subsystem: 1432:9130 Flags: bus master, medium devsel, latency 32, IRQ 82 I/O ports at 1000 [size=256] Memory at e8000000 (32-bit, non-prefetchable) [size=256] Expansion ROM at e8900000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Having seen the advice to look at /proc/cmdline in #446744, i'm going to experiment with removing some of my command line options, which were added at some time in the past to try to get the Marvell PATA controller working. -- Paul <http://paul.gear.dyndns.org>Attachment: signature.asc
Description: OpenPGP digital signature
--- End Message ---
--- Begin Message ---
- To: 430941-done@bugs.debian.org, 442508-done@bugs.debian.org, 444835-done@bugs.debian.org, 456273-done@bugs.debian.org, 592394-done@bugs.debian.org, 592767-done@bugs.debian.org, 592861-done@bugs.debian.org, 592971-done@bugs.debian.org
- Subject: Closing
- From: Moritz Mühlenhoff <jmm@inutil.org>
- Date: Sat, 8 Jun 2013 12:16:25 +0200
- Message-id: <20130608101625.GD4796@pisco.westfalen.local>
Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.0 / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to control@bugs.debian.org with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---