Bug#709647: linux-source-3.2: USB 1.1 no longer works
- To: Ben Hutchings <ben@decadent.org.uk>
- Cc: 709647@bugs.debian.org
- Subject: Bug#709647: linux-source-3.2: USB 1.1 no longer works
- From: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
- Date: Tue, 4 Jun 2013 01:32:40 +0000
- Message-id: <[🔎] 20130604013240.GA9407@rhi.hi.is>
- Reply-to: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>, 709647@bugs.debian.org
- In-reply-to: <1369965011.3469.456.camel@deadeye.wl.decadent.org.uk>
- References: <20130524173836.GA12381@rhi.hi.is> <1369531357.3469.277.camel@deadeye.wl.decadent.org.uk> <20130528194852.GA21913@rhi.hi.is> <20130528204754.GN4752@decadent.org.uk> <20130530191310.GA20948@rhi.hi.is> <1369965011.3469.456.camel@deadeye.wl.decadent.org.uk>
On Fri, May 31, 2013 at 02:50:11AM +0100, Ben Hutchings wrote:
> Now I see this is a rather old computer (BIOS dated 1999), so I'm not so
> surprised that ACPI is not supported!
>
> Does the kernel in linux-image-3.2.0-4-486 work?
>
> Can you send a boot log and output of 'lspci -s 0000:01.2' from a
> working kernel (old or new)?
>
"lspci -s 0000:01.2":
00:01.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
"linux-image-3.2.0-4-486" no difference (no USB)
"linux-3.1.1" and "linux-3.9.4" (from kernel.org) no difference (no USB)
Compilation of "linux-2.6.3[89]" failed, error (for ...39):
arch/x86/kernel/e820.c: In function 'e820_setup_gap':
arch/x86/kernel/e820.c:640:6: warning: variable 'found' set but not used [-Wunused-but-set-variable]
arch/x86/kernel/ptrace.c:1366:17: error: conflicting types for 'syscall_trace_enter'
In file included from /home/bg/src/linux-2.6.39/arch/x86/include/asm/vm86.h:130:0,
from /home/bg/src/linux-2.6.39/arch/x86/include/asm/processor.h:10,
from /home/bg/src/linux-2.6.39/arch/x86/include/asm/thread_info.h:22,
from include/linux/thread_info.h:53,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:29,
from include/linux/time.h:8,
from include/linux/timex.h:56,
from include/linux/sched.h:57,
from arch/x86/kernel/ptrace.c:8:
/home/bg/src/linux-2.6.39/arch/x86/include/asm/ptrace.h:146:13: note: previous declaration of 'syscall_trace_enter' was here
arch/x86/kernel/ptrace.c:1411:17: error: conflicting types for 'syscall_trace_leave'
In file included from /home/bg/src/linux-2.6.39/arch/x86/include/asm/vm86.h:130:0,
from /home/bg/src/linux-2.6.39/arch/x86/include/asm/processor.h:10,
from /home/bg/src/linux-2.6.39/arch/x86/include/asm/thread_info.h:22,
from include/linux/thread_info.h:53,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:29,
from include/linux/time.h:8,
from include/linux/timex.h:56,
from include/linux/sched.h:57,
from arch/x86/kernel/ptrace.c:8:
/home/bg/src/linux-2.6.39/arch/x86/include/asm/ptrace.h:147:13: note: previous declaration of 'syscall_trace_leave' was here
make[2]: *** [arch/x86/kernel/ptrace.o] Error 1
make[1]: *** [arch/x86/kernel] Error 2
make: *** [arch/x86] Error 2
####---####
Boot log (/var/log/kern.log) (with USB):
Jun 3 02:21:21 jeti kernel: imklog 5.8.11, log source = /proc/kmsg started.
Jun 3 02:21:21 jeti kernel: [ 0.000000] Linux version 2.6.32-47 (2.6.32) (bg@jeti.jeti.is) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Thu Feb 14 00:07:19 GMT 2013
Jun 3 02:21:21 jeti kernel: [ 0.000000] KERNEL supported cpus:
Jun 3 02:21:21 jeti kernel: [ 0.000000] Intel GenuineIntel
Jun 3 02:21:21 jeti kernel: [ 0.000000] AMD AuthenticAMD
Jun 3 02:21:21 jeti kernel: [ 0.000000] NSC Geode by NSC
Jun 3 02:21:21 jeti kernel: [ 0.000000] Cyrix CyrixInstead
Jun 3 02:21:21 jeti kernel: [ 0.000000] Centaur CentaurHauls
Jun 3 02:21:21 jeti kernel: [ 0.000000] Transmeta GenuineTMx86
Jun 3 02:21:21 jeti kernel: [ 0.000000] Transmeta TransmetaCPU
Jun 3 02:21:21 jeti kernel: [ 0.000000] UMC UMC UMC UMC
Jun 3 02:21:21 jeti kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 3 02:21:21 jeti kernel: [ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
Jun 3 02:21:21 jeti kernel: [ 0.000000] BIOS-e801: 0000000000100000 - 000000000a000000 (usable)
Jun 3 02:21:21 jeti kernel: [ 0.000000] DMI 2.2 present.
Jun 3 02:21:21 jeti kernel: [ 0.000000] last_pfn = 0xa000 max_arch_pfn = 0x100000
Jun 3 02:21:21 jeti kernel: [ 0.000000] initial memory mapped : 0 - 01800000
Jun 3 02:21:21 jeti kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000000a000000
Jun 3 02:21:21 jeti kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Jun 3 02:21:21 jeti kernel: [ 0.000000] 0000400000 - 000a000000 page 2M
Jun 3 02:21:21 jeti kernel: [ 0.000000] kernel direct mapping tables up to a000000 @ 7000-b000
Jun 3 02:21:21 jeti kernel: [ 0.000000] 160MB LOWMEM available.
Jun 3 02:21:21 jeti kernel: [ 0.000000] mapped low ram: 0 - 0a000000
Jun 3 02:21:21 jeti kernel: [ 0.000000] low ram: 0 - 0a000000
Jun 3 02:21:21 jeti kernel: [ 0.000000] node 0 low ram: 00000000 - 0a000000
Jun 3 02:21:21 jeti kernel: [ 0.000000] node 0 bootmap 00001000 - 00002400
Jun 3 02:21:21 jeti kernel: [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 000a000000]
Jun 3 02:21:21 jeti kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jun 3 02:21:21 jeti kernel: [ 0.000000] #1 [0001000000 - 00013a22ac] TEXT DATA BSS ==> [0001000000 - 00013a22ac]
Jun 3 02:21:21 jeti kernel: [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
Jun 3 02:21:21 jeti kernel: [ 0.000000] #3 [00013a3000 - 00013a91cc] BRK ==> [00013a3000 - 00013a91cc]
Jun 3 02:21:21 jeti kernel: [ 0.000000] #4 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
Jun 3 02:21:21 jeti kernel: [ 0.000000] Zone PFN ranges:
Jun 3 02:21:21 jeti kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Jun 3 02:21:21 jeti kernel: [ 0.000000] Normal 0x00001000 -> 0x0000a000
Jun 3 02:21:21 jeti kernel: [ 0.000000] Movable zone start PFN for each node
Jun 3 02:21:21 jeti kernel: [ 0.000000] early_node_map[2] active PFN ranges
Jun 3 02:21:21 jeti kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f
Jun 3 02:21:21 jeti kernel: [ 0.000000] 0: 0x00000100 -> 0x0000a000
Jun 3 02:21:21 jeti kernel: [ 0.000000] On node 0 totalpages: 40863
Jun 3 02:21:21 jeti kernel: [ 0.000000] free_area_init_node: node 0, pgdat c132e6c0, node_mem_map c13aa000
Jun 3 02:21:21 jeti kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 3 02:21:21 jeti kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 3 02:21:21 jeti kernel: [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
Jun 3 02:21:21 jeti kernel: [ 0.000000] Normal zone: 288 pages used for memmap
Jun 3 02:21:21 jeti kernel: [ 0.000000] Normal zone: 36576 pages, LIFO batch:7
Jun 3 02:21:21 jeti kernel: [ 0.000000] Allocating PCI resources starting at a000000 (gap: a000000:f6000000)
Jun 3 02:21:21 jeti kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40543
Jun 3 02:21:21 jeti kernel: [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.32-47 ro root=803
Jun 3 02:21:21 jeti kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.000000] Initializing CPU#0
Jun 3 02:21:21 jeti kernel: [ 0.000000] Memory: 158072k/163840k available (2363k kernel code, 5232k reserved, 905k data, 216k init, 0k highmem)
Jun 3 02:21:21 jeti kernel: [ 0.000000] virtual kernel memory layout:
Jun 3 02:21:21 jeti kernel: [ 0.000000] fixmap : 0xfffe6000 - 0xfffff000 ( 100 kB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] vmalloc : 0xca800000 - 0xfffe4000 ( 855 MB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] lowmem : 0xc0000000 - 0xca000000 ( 160 MB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] .init : 0xc1332000 - 0xc1368000 ( 216 kB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] .data : 0xc124effe - 0xc1331688 ( 905 kB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] .text : 0xc1000000 - 0xc124effe (2363 kB)
Jun 3 02:21:21 jeti kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jun 3 02:21:21 jeti kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jun 3 02:21:21 jeti kernel: [ 0.000000] Hierarchical RCU implementation.
Jun 3 02:21:21 jeti kernel: [ 0.000000] NR_IRQS:16
Jun 3 02:21:21 jeti kernel: [ 0.000000] Console: colour VGA+ 80x25
Jun 3 02:21:21 jeti kernel: [ 0.000000] console [tty0] enabled
Jun 3 02:21:21 jeti kernel: [ 0.000000] Fast TSC calibration using PIT
Jun 3 02:21:21 jeti kernel: [ 0.000000] Detected 331.522 MHz processor.
Jun 3 02:21:21 jeti kernel: [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 663.04 BogoMIPS (lpj=3315220)
Jun 3 02:21:21 jeti kernel: [ 0.000438] Mount-cache hash table entries: 512
Jun 3 02:21:21 jeti kernel: [ 0.001810] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
Jun 3 02:21:21 jeti kernel: [ 0.002151] CPU: AMD-K6(tm) 3D processor stepping 0c
Jun 3 02:21:21 jeti kernel: [ 0.002388] Checking 'hlt' instruction... OK.
Jun 3 02:21:21 jeti kernel: [ 0.043723] NET: Registered protocol family 16
Jun 3 02:21:21 jeti kernel: [ 0.060534] PCI: PCI BIOS revision 2.10 entry at 0xeb150, last bus=2
Jun 3 02:21:21 jeti kernel: [ 0.060705] PCI: Using configuration type 1 for base access
Jun 3 02:21:21 jeti kernel: [ 0.097780] bio: create slab <bio-0> at 0
Jun 3 02:21:21 jeti kernel: [ 0.100309] vgaarb: loaded
Jun 3 02:21:21 jeti kernel: [ 0.102774] SCSI subsystem initialized
Jun 3 02:21:21 jeti kernel: [ 0.103256] libata version 3.00 loaded.
Jun 3 02:21:21 jeti kernel: [ 0.104479] usbcore: registered new interface driver usbfs
Jun 3 02:21:21 jeti kernel: [ 0.105116] usbcore: registered new interface driver hub
Jun 3 02:21:21 jeti kernel: [ 0.105854] usbcore: registered new device driver usb
Jun 3 02:21:21 jeti kernel: [ 0.107423] PCI: Probing PCI hardware
Jun 3 02:21:21 jeti kernel: [ 0.107600] PCI: Probing PCI hardware (bus 00)
Jun 3 02:21:21 jeti kernel: [ 0.108383] pci 0000:00:01.1: reg 20 io port: [0x1100-0x110f]
Jun 3 02:21:21 jeti kernel: [ 0.108491] pci 0000:00:01.2: reg 20 io port: [0x00-0x1f]
Jun 3 02:21:21 jeti kernel: [ 0.108616] pci 0000:00:01.3: quirk: region 1000-103f claimed by PIIX4 ACPI
Jun 3 02:21:21 jeti kernel: [ 0.108800] pci 0000:00:01.3: quirk: region 1400-140f claimed by PIIX4 SMB
Jun 3 02:21:21 jeti kernel: [ 0.108980] pci 0000:00:01.3: PIIX4 devres C PIO at 0398-0399
Jun 3 02:21:21 jeti kernel: [ 0.109199] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdc00000-0xfdffffff]
Jun 3 02:21:21 jeti kernel: [ 0.109224] pci 0000:00:02.0: reg 14 32bit mmio: [0xfe7f0000-0xfe7fffff]
Jun 3 02:21:21 jeti kernel: [ 0.109249] pci 0000:00:02.0: reg 18 32bit mmio: [0xfe000000-0xfe3fffff]
Jun 3 02:21:21 jeti kernel: [ 0.109287] pci 0000:00:02.0: reg 30 32bit mmio pref: [0x0c0000-0x0cffff]
Jun 3 02:21:21 jeti kernel: [ 0.109389] pci 0000:00:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jun 3 02:21:21 jeti kernel: [ 0.109433] pci 0000:00:03.0: supports D1 D2
Jun 3 02:21:21 jeti kernel: [ 0.109449] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
Jun 3 02:21:21 jeti kernel: [ 0.109612] pci 0000:00:03.0: PME# disabled
Jun 3 02:21:21 jeti kernel: [ 0.109823] pci 0000:00:03.1: reg 10 32bit mmio: [0x000000-0x000fff]
Jun 3 02:21:21 jeti kernel: [ 0.109865] pci 0000:00:03.1: supports D1 D2
Jun 3 02:21:21 jeti kernel: [ 0.109880] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
Jun 3 02:21:21 jeti kernel: [ 0.110060] pci 0000:00:03.1: PME# disabled
Jun 3 02:21:21 jeti kernel: [ 0.112969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jun 3 02:21:21 jeti kernel: [ 0.116491] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7110]
Jun 3 02:21:21 jeti kernel: [ 0.118207] Switching to clocksource tsc
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:02.0: BAR 6: address space collision on of device [0x0c0000-0x0cffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: CardBus bridge, secondary bus 0000:01
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: IO window: 0x001800-0x0018ff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: IO window: 0x001c00-0x001cff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: PREFETCH window: 0xc000000-0xfffffff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: MEM window: 0x10000000-0x13ffffff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: CardBus bridge, secondary bus 0000:05
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: IO window: 0x002000-0x0020ff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: IO window: 0x002400-0x0024ff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: PREFETCH window: 0x14000000-0x17ffffff
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: MEM window: 0x18000000-0x1bffffff
Jun 3 02:21:21 jeti kernel: [ 0.119890] PCI: setting IRQ 10 as level-triggered
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.0: found PCI INT A -> IRQ 10
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci 0000:00:03.1: found PCI INT B -> IRQ 10
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:01: resource 0 io: [0x1800-0x18ff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:01: resource 1 io: [0x1c00-0x1cff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:01: resource 2 pref mem [0xc000000-0xfffffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:01: resource 3 mem: [0x10000000-0x13ffffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:05: resource 0 io: [0x2000-0x20ff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:05: resource 1 io: [0x2400-0x24ff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:05: resource 2 pref mem [0x14000000-0x17ffffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] pci_bus 0000:05: resource 3 mem: [0x18000000-0x1bffffff]
Jun 3 02:21:21 jeti kernel: [ 0.119890] NET: Registered protocol family 2
Jun 3 02:21:21 jeti kernel: [ 0.119890] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.120801] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.122512] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jun 3 02:21:21 jeti kernel: [ 0.123267] TCP: Hash tables configured (established 8192 bind 8192)
Jun 3 02:21:21 jeti kernel: [ 0.123436] TCP reno registered
Jun 3 02:21:21 jeti kernel: [ 0.124028] NET: Registered protocol family 1
Jun 3 02:21:21 jeti kernel: [ 0.124275] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Jun 3 02:21:21 jeti kernel: [ 0.124483] pci 0000:00:01.2: enabling device (0000 -> 0001)
Jun 3 02:21:21 jeti kernel: [ 0.124657] PCI: setting IRQ 5 as level-triggered
Jun 3 02:21:21 jeti kernel: [ 0.124674] pci 0000:00:01.2: assigned PCI INT D -> IRQ 5
Jun 3 02:21:21 jeti kernel: [ 0.124920] pci 0000:00:02.0: Boot video device
Jun 3 02:21:21 jeti kernel: [ 0.126999] platform rtc_cmos: registered platform RTC device (no PNP device found)
Jun 3 02:21:21 jeti kernel: [ 0.169039] msgmni has been set to 309
Jun 3 02:21:21 jeti kernel: [ 0.169841] alg: No test for stdrng (krng)
Jun 3 02:21:21 jeti kernel: [ 0.171385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jun 3 02:21:21 jeti kernel: [ 0.171747] io scheduler noop registered
Jun 3 02:21:21 jeti kernel: [ 0.172861] io scheduler cfq registered (default)
Jun 3 02:21:21 jeti kernel: [ 0.173251] isapnp: Scanning for PnP cards...
Jun 3 02:21:21 jeti kernel: [ 0.272477] 00:01: card 'ESS ES1869 Plug and Play AudioDrive'
Jun 3 02:21:21 jeti kernel: [ 0.272655] isapnp: 1 Plug & Play card detected total
Jun 3 02:21:21 jeti kernel: [ 0.310070] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jun 3 02:21:21 jeti kernel: [ 0.310941] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 3 02:21:21 jeti kernel: [ 0.316377] Floppy drive(s): fd0 is 1.44M
Jun 3 02:21:21 jeti kernel: [ 0.334941] FDC 0 is a National Semiconductor PC87306
Jun 3 02:21:21 jeti kernel: [ 0.337749] Uniform Multi-Platform E-IDE driver
Jun 3 02:21:21 jeti kernel: [ 0.339291] ide-gd driver 1.18
Jun 3 02:21:21 jeti kernel: [ 0.339826] ide-cd driver 5.00
Jun 3 02:21:21 jeti kernel: [ 0.342478] ata_piix 0000:00:01.1: version 2.13
Jun 3 02:21:21 jeti kernel: [ 0.343310] ata_piix 0000:00:01.1: setting latency timer to 64
Jun 3 02:21:21 jeti kernel: [ 0.343820] scsi0 : ata_piix
Jun 3 02:21:21 jeti kernel: [ 0.345432] scsi1 : ata_piix
Jun 3 02:21:21 jeti kernel: [ 0.346586] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
Jun 3 02:21:21 jeti kernel: [ 0.346765] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
Jun 3 02:21:21 jeti kernel: [ 0.348589] PPP generic driver version 2.4.2
Jun 3 02:21:21 jeti kernel: [ 0.350147] PPP Deflate Compression module registered
Jun 3 02:21:21 jeti kernel: [ 0.350319] PPP BSD Compression module registered
Jun 3 02:21:21 jeti kernel: [ 0.353477] yenta_cardbus 0000:00:03.0: CardBus bridge found [104c:5036]
Jun 3 02:21:21 jeti kernel: [ 0.353687] yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI
Jun 3 02:21:21 jeti kernel: [ 0.353948] yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI
Jun 3 02:21:21 jeti kernel: [ 0.354122] yenta_cardbus 0000:00:03.0: TI: mfunc 0x01dc1622, devctl 0x64
Jun 3 02:21:21 jeti kernel: [ 0.522288] ata2.00: ATAPI: CD-224E, 1.5A, max MWDMA2
Jun 3 02:21:21 jeti kernel: [ 0.524610] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
Jun 3 02:21:21 jeti kernel: [ 0.524732] ata1.00: 312581808 sectors, multi 0: LBA48
Jun 3 02:21:21 jeti kernel: [ 0.562079] ata2.00: configured for MWDMA2
Jun 3 02:21:21 jeti kernel: [ 0.564315] ata1.00: configured for UDMA/33
Jun 3 02:21:21 jeti kernel: [ 0.565371] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
Jun 3 02:21:21 jeti kernel: [ 0.568812] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Jun 3 02:21:21 jeti kernel: [ 0.569716] sd 0:0:0:0: [sda] Write Protect is off
Jun 3 02:21:21 jeti kernel: [ 0.569884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 3 02:21:21 jeti kernel: [ 0.570157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 3 02:21:21 jeti kernel: [ 0.571017] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 3 02:21:21 jeti kernel: [ 0.572854] sda:
Jun 3 02:21:21 jeti kernel: [ 0.575176] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.5A PQ: 0 ANSI: 5
Jun 3 02:21:21 jeti kernel: [ 0.582627] sr0: scsi3-mmc drive: 24x/24x xa/form2 cdda tray
Jun 3 02:21:21 jeti kernel: [ 0.582813] Uniform CD-ROM driver Revision: 3.20
Jun 3 02:21:21 jeti kernel: [ 0.584168] sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 3 02:21:21 jeti kernel: [ 0.585289] sr 1:0:0:0: Attached scsi generic sg1 type 5
Jun 3 02:21:21 jeti kernel: [ 0.613086] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
Jun 3 02:21:21 jeti kernel: [ 0.723060] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 3 02:21:21 jeti kernel: [ 0.862317] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0a98, PCI irq 10
Jun 3 02:21:21 jeti kernel: [ 0.862493] yenta_cardbus 0000:00:03.0: Socket status: 30000006
Jun 3 02:21:21 jeti kernel: [ 1.121951] yenta_cardbus 0000:00:03.1: CardBus bridge found [104c:5036]
Jun 3 02:21:21 jeti kernel: [ 1.122156] yenta_cardbus 0000:00:03.1: Using CSCINT to route CSC interrupts to PCI
Jun 3 02:21:21 jeti kernel: [ 1.122321] yenta_cardbus 0000:00:03.1: Routing CardBus interrupts to PCI
Jun 3 02:21:21 jeti kernel: [ 1.122438] yenta_cardbus 0000:00:03.1: TI: mfunc 0x01dc1622, devctl 0x64
Jun 3 02:21:21 jeti kernel: [ 1.372400] yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0a98, PCI irq 10
Jun 3 02:21:21 jeti kernel: [ 1.372574] yenta_cardbus 0000:00:03.1: Socket status: 30000006
Jun 3 02:21:21 jeti kernel: [ 1.632459] uhci_hcd: USB Universal Host Controller Interface driver
Jun 3 02:21:21 jeti kernel: [ 1.632991] uhci_hcd 0000:00:01.2: found PCI INT D -> IRQ 5
Jun 3 02:21:21 jeti kernel: [ 1.633236] uhci_hcd 0000:00:01.2: setting latency timer to 64
Jun 3 02:21:21 jeti kernel: [ 1.633254] uhci_hcd 0000:00:01.2: UHCI Host Controller
Jun 3 02:21:21 jeti kernel: [ 1.633444] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
Jun 3 02:21:21 jeti kernel: [ 1.633786] uhci_hcd 0000:00:01.2: irq 5, io base 0x00001040
Jun 3 02:21:21 jeti kernel: [ 1.635365] usb usb1: configuration #1 chosen from 1 choice
Jun 3 02:21:21 jeti kernel: [ 1.636123] hub 1-0:1.0: USB hub found
Jun 3 02:21:21 jeti kernel: [ 1.636419] hub 1-0:1.0: 2 ports detected
Jun 3 02:21:21 jeti kernel: [ 1.637266] Initializing USB Mass Storage driver...
Jun 3 02:21:21 jeti kernel: [ 1.637914] usbcore: registered new interface driver usb-storage
Jun 3 02:21:21 jeti kernel: [ 1.638092] USB Mass Storage support registered.
Jun 3 02:21:21 jeti kernel: [ 1.638776] usbcore: registered new interface driver libusual
Jun 3 02:21:21 jeti kernel: [ 1.640595] PNP: No PS/2 controller found. Probing ports directly.
Jun 3 02:21:21 jeti kernel: [ 1.645319] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 3 02:21:21 jeti kernel: [ 1.645529] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 3 02:21:21 jeti kernel: [ 1.648291] mice: PS/2 mouse device common for all mice
Jun 3 02:21:21 jeti kernel: [ 1.649089] logibm.c: Didn't find Logitech busmouse at 0x23c
Jun 3 02:21:21 jeti kernel: [ 1.651227] input: PC Speaker as /devices/platform/pcspkr/input/input0
Jun 3 02:21:21 jeti kernel: [ 1.653937] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Jun 3 02:21:21 jeti kernel: [ 1.654117] rtc0: alarms up to one day, 114 bytes nvram
Jun 3 02:21:21 jeti kernel: [ 1.654618] EDAC MC: Ver: 2.1.0 Feb 13 2013
Jun 3 02:21:21 jeti kernel: [ 1.669004] usbcore: registered new interface driver usbhid
Jun 3 02:21:21 jeti kernel: [ 1.669233] usbhid: v2.6:USB HID core driver
Jun 3 02:21:21 jeti kernel: [ 1.671299] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 3 02:21:21 jeti kernel: [ 1.674269] TCP cubic registered
Jun 3 02:21:21 jeti kernel: [ 1.674438] NET: Registered protocol family 17
Jun 3 02:21:21 jeti kernel: [ 1.677106] rtc_cmos rtc_cmos: setting system clock to 2013-06-03 02:20:50 UTC (1370226050)
Jun 3 02:21:21 jeti kernel: [ 1.680241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 3 02:21:21 jeti kernel: [ 1.951907] usb 1-1: new low speed USB device using uhci_hcd and address 2
Jun 3 02:21:21 jeti kernel: [ 2.132339] usb 1-1: configuration #1 chosen from 1 choice
Jun 3 02:21:21 jeti kernel: [ 2.169476] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
Jun 3 02:21:21 jeti kernel: [ 2.171019] generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:01.2-1/input0
Jun 3 02:21:21 jeti kernel: [ 2.304494] Synaptics Touchpad, model: 1, fw: 4.1, id: 0x14aa1, caps: 0x0/0x0/0x0
Jun 3 02:21:21 jeti kernel: [ 2.338629] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
Jun 3 02:21:21 jeti kernel: [ 2.388694] VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
Jun 3 02:21:21 jeti kernel: [ 2.388957] Freeing unused kernel memory: 216k freed
Jun 3 02:21:21 jeti kernel: [ 10.866641] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
Jun 3 02:21:21 jeti kernel: [ 10.869263] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Jun 3 02:21:21 jeti kernel: [ 10.870713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
Jun 3 02:21:21 jeti kernel: [ 10.871880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
Jun 3 02:21:21 jeti kernel: [ 10.914780] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
Jun 3 02:21:21 jeti kernel: [ 10.917367] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Jun 3 02:21:21 jeti kernel: [ 10.918818] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
Jun 3 02:21:21 jeti kernel: [ 10.920073] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
Jun 3 02:21:21 jeti kernel: [ 10.922293] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
Jun 3 02:21:21 jeti kernel: [ 10.934322] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Jun 3 02:21:21 jeti kernel: [ 16.585051] Adding 116728k swap on /dev/sda2. Priority:-1 extents:1 across:116728k
Jun 3 02:21:21 jeti kernel: [ 17.538023] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 17.538218] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 23.912827] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 23.913024] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 23.973511] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 23.973823] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.054983] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.055173] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.169864] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.170058] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.308091] fsck.ext2: sending ioctl 127c to a partition!
Jun 3 02:21:21 jeti kernel: [ 24.308239] fsck.ext2: sending ioctl 127c to a partition!
--
Bjarni I. Gislason
Reply to: