--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: ext3_free_blocks: Freeing blocks not in datazone" error on heavy disk activity
- From: Tim Miller Dyck <editor@canadianmennonite.org>
- Date: Tue, 2 Sep 2008 12:58:12 -0400
- Message-id: <2313CE5B-91A6-4EF4-A424-55D98F4BCA28@canadianmennonite.org>
Package: linux-image-2.6.24-etchnhalf.1-486
Version: 2.6.24-6~etchnhalf.4
Severity: normal
Hello,
This is a follow up to bug #426409
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=426409#17).
I switched to the etchnhalf kernel as advised. The error still occurs
but is less severe as the affected volume does not re-mount read-only as
before. I hope this is because the error is better handled internally in
the ext3 code as opposed to just continuing to operate on an
inconsistent volume.
The error messages are also different than before: there are no journal
error messages now, but the "ext3_free_blocks_sb: bit already cleared
for block" error is new.
The affected device is an ext3 volume on a LVM device, which is on a
RAID 0 mirror of two SATA hard drives.
from kern.log
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks: Freeing blocks not in datazone - block = 329867264,
count = 1
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks: Freeing blocks not in datazone - block = 2147487744,
count = 1
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks_sb: bit already cleared for block 10580596
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks_sb: bit already cleared for block 10580597
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks_sb: bit already cleared for block 10580598
Aug 11 18:30:02 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks_sb: bit already cleared for block 10580599
...
Aug 25 15:30:01 menno kernel: EXT3-fs error (device dm-1):
ext3_free_blocks: Freeing blocks not in datazone - block = 177790976,
count = 1
(no "ext3_free_blocks_sb: bit already cleared for block" error on Aug.
25)
# uname -a
Linux menno 2.6.24-etchnhalf.1-486 #1 Mon Jul 21 10:36:16 UTC 2008 i686
GNU/Linux
# cat /etc/fstab
...
/dev/vg_on_md0/public /data/public ext3 acl 0
0
...
Regards,
Tim
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-486 (Debian 2.6.24-6~etchnhalf.4) (dannf@debian.org
) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Mon
Jul 21 10:36:16 UTC 2008
** Command line:
root=/dev/md1 ro
** Not tainted
** Kernel log:
raid1: raid set md2 active with 2 out of 2 mirrors
md: md3 stopped.
md: bind<hdc3>
md: bind<hda3>
raid1: raid set md3 active with 2 out of 2 mirrors
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input3
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Adding 1952120k swap on /dev/md2. Priority:-1 extents:1 across:1952120k
EXT3 FS on md1, internal journal
i2c /dev entries driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
tun0: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
NET: Registered protocol family 5
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for data-check.
md: using 128k window, over a total of 195358336 blocks.
md: data-check of RAID array md1
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for data-check.
md: using 128k window, over a total of 18554624 blocks.
md: delaying data-check of md2 until md1 has finished (they share one
or more physical units)
md: delaying data-check of md3 until md2 has finished (they share one
or more physical units)
md: delaying data-check of md2 until md1 has finished (they share one
or more physical units)
md: md1: data-check done.
md: data-check of RAID array md2
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for data-check.
md: using 128k window, over a total of 1952128 blocks.
md: delaying data-check of md3 until md2 has finished (they share one
or more physical units)
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:hda1
disk 1, wo:0, o:1, dev:hdc1
md: md2: data-check done.
md: data-check of RAID array md3
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for data-check.
md: using 128k window, over a total of 223688960 blocks.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:hda2
disk 1, wo:0, o:1, dev:hdc2
md: md0: data-check done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda1
disk 1, wo:0, o:1, dev:sdb1
md: md3: data-check done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:hda3
disk 1, wo:0, o:1, dev:hdc3
EXT3-fs error (device dm-1): ext3_free_blocks: Freeing blocks not in
datazone - block = 329867264, count = 1
EXT3-fs error (device dm-1): ext3_free_blocks: Freeing blocks not in
datazone - block = 2147487744, count = 1
EXT3-fs error (device dm-1): ext3_free_blocks_sb: bit already cleared
for block 10580596
EXT3-fs error (device dm-1): ext3_free_blocks_sb: bit already cleared
for block 10580597
EXT3-fs error (device dm-1): ext3_free_blocks_sb: bit already cleared
for block 10580598
EXT3-fs error (device dm-1): ext3_free_blocks_sb: bit already cleared
for block 10580599
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
EXT3-fs error (device dm-1): ext3_free_blocks: Freeing blocks not in
datazone - block = 177790976, count = 1
** Loaded modules:
Module Size Used by
ppdev 8836 0
parport_pc 26148 0
lp 10948 0
parport 33352 3 ppdev,parport_pc,lp
nfs 221064 0
appletalk 31204 20
nfsd 202608 17
lockd 59912 3 nfs,nfsd
nfs_acl 3456 2 nfs,nfsd
auth_rpcgss 38816 1 nfsd
sunrpc 165532 11 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4480 1 nfsd
tun 11008 1
ipv6 230372 106
eeprom 7312 0
w83l785ts 7184 0
asb100 19092 0
hwmon_vid 2944 1 asb100
i2c_dev 7172 0
floppy 54276 0
rtc 12828 0
pcspkr 3072 0
shpchp 30996 0
pci_hotplug 27552 1 shpchp
button 8464 0
i2c_nforce2 6528 0
i2c_core 22416 5
eeprom,w83l785ts,asb100,i2c_dev,i2c_nforce2
nvidia_agp 8604 1
agpgart 31280 1 nvidia_agp
evdev 10880 0
ext3 120712 3
jbd 39700 1 ext3
dm_mirror 20608 0
dm_snapshot 16928 0
dm_mod 54724 8 dm_mirror,dm_snapshot
ide_generic 1280 0 [permanent]
ide_cd 36256 0
cdrom 32672 1 ide_cd
ide_disk 15488 8
generic 4484 0 [permanent]
e100 34060 0
mii 5248 1 e100
amd74xx 8848 0 [permanent]
ide_core 107224 5
ide_generic,ide_cd,ide_disk,generic,amd74xx
ehci_hcd 32140 0
ohci_hcd 21892 0
ata_generic 7556 0
usbcore 126316 3 ehci_hcd,ohci_hcd
sd_mod 27152 4
thermal 16028 0
processor 28720 1 thermal
fan 4868 0
raid1 21632 4
md_mod 72212 5 raid1
sata_sil 11016 2
libata 145136 2 ata_generic,sata_sil
scsi_mod 141836 2 sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 AGP (different
version?) [10de:01e0] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory
Controller 0 [10de:01ea] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory
Controller 4 [10de:01ee] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory
Controller 3 [10de:01ed] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory
Controller 2 [10de:01ec] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory
Controller 5 [10de:01ef] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:
0060] (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:80ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:
0064] (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=32]
Capabilities: <access denied>
00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB
Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e7002000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB
Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e7000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB
Controller [10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e7001000 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI
Bridge [10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e4000000-e6ffffff
Prefetchable memory behind bridge: 30000000-301fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:
0065] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0c11]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-
prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-
prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-
prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-
prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8]
(rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
01:06.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02) (prog-
if 01)
Subsystem: Adaptec SATAConnect 1205SA Host Controller
[9005:0250]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at e6101000 (32-bit, non-prefetchable)
[size=512]
[virtual] Expansion ROM at 30100000 [disabled] [size=512K]
Capabilities: <access denied>
01:07.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage
I/II 215GT [Mach64 GT] [1002:4754] (rev 48) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc 3D Rage I/II 215GT [Mach64
GT] [1002:4754]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at e5000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: I/O ports at d400 [size=256]
[virtual] Expansion ROM at 30180000 [disabled] [size=64K]
01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9
[Ethernet Pro 100] [8086:1229] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter [8086:000c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32
bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e6100000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at d800 [size=64]
Region 2: Memory at e6000000 (32-bit, non-prefetchable)
[size=1M]
[virtual] Expansion ROM at 30000000 [disabled] [size=1M]
Capabilities: <access denied>
01:09.0 Serial controller [0700]: 3Com Corp, Modem Division 56K
FaxModem Model 5610 [12b9:1008] (rev 01) (prog-if 02 [16550])
Subsystem: 3Com Corp, Modem Division Unknown device [12b9:00d3]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Capabilities: <access denied>
-- System Information:
Debian Release: 4.0
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-486
Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8)
Versions of packages linux-image-2.6.24-etchnhalf.1-486 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration
management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an
initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux
kernel mo
linux-image-2.6.24-etchnhalf.1-486 recommends no packages.
-- debconf information:
linux-image-2.6.24-etchnhalf.1-486/preinst/abort-overwrite-2.6.24-
etchnhalf.1-486:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-etchnhalf.1-486/postinst/depmod-error-2.6.24-
etchnhalf.1-486: false
linux-image-2.6.24-etchnhalf.1-486/postinst/create-kimage-
link-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/kimage-is-a-directory:
linux-image-2.6.24-etchnhalf.1-486/prerm/would-invalidate-boot-
loader-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/old-initrd-link-2.6.24-
etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/prerm/removing-running-
kernel-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/bootloader-test-
error-2.6.24-etchnhalf.1-486:
linux-image-2.6.24-etchnhalf.1-486/preinst/overwriting-
modules-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/preinst/lilo-has-ramdisk:
linux-image-2.6.24-etchnhalf.1-486/preinst/bootloader-initrd-2.6.24-
etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/old-system-map-
link-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/depmod-error-
initrd-2.6.24-etchnhalf.1-486: false
linux-image-2.6.24-etchnhalf.1-486/preinst/abort-install-2.6.24-
etchnhalf.1-486:
linux-image-2.6.24-etchnhalf.1-486/preinst/initrd-2.6.24-etchnhalf.
1-486:
linux-image-2.6.24-etchnhalf.1-486/preinst/failed-to-move-
modules-2.6.24-etchnhalf.1-486:
linux-image-2.6.24-etchnhalf.1-486/postinst/bootloader-error-2.6.24-
etchnhalf.1-486:
linux-image-2.6.24-etchnhalf.1-486/preinst/elilo-initrd-2.6.24-
etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/postinst/old-dir-initrd-
link-2.6.24-etchnhalf.1-486: true
linux-image-2.6.24-etchnhalf.1-486/preinst/lilo-initrd-2.6.24-
etchnhalf.1-486: true
--- End Message ---