--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-5-686: PIO & QOS modes prevent WiFi Broadcom BCM4312 802.11b/g to work
- From: thibaut bethune <thibaut.bethune@gmail.com>
- Date: Sat, 29 Oct 2011 14:44:37 +0200
- Message-id: <CAACN17hzUC+0SWmwW7MKpjQHQQefYwBT3OpDPe60sEo7JkYu7g@mail.gmail.com>
Package: linux-2.6
Version: 2.6.32-38
Severity: normal
Tags: upstream
Hi,
Using Squeeze on my netbook Dell Mini 9 (aka Inspiron 910) with WiFi Broadcom
BCM4312 802.11b/g chip and after having installed firmware-b43-lpphy-installer
everything was ok.
Then i couldn't connect via wi-fi to the net anymore. I think that an upgrade
must be the cause.
Then i tried that workaround (see http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=589867#26) :
# rmmod b43
# echo "options b43 pio=1 qos=0" > /etc/modprobe.d/b43.conf
# modprobe b43
and it works again
Howvere i wouldn't consider that bug to be fixed since user shouldn't have to
apply the workaround by himself !
Besides it seems that Linux 3.0 has a fix for that
http://linuxwireless.org/en/users/Drivers/b43#Known_issues
Thanks
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-38) (ben@decadent.org.uk)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC
2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=be9b83ba-14ea-4b76-bc7c-d7112eaaa87a ro quiet
** Not tainted
** Kernel log:
[ 226.712280] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[ 226.712299] r8169 0000:04:00.0: PME# disabled
[ 226.852213] sd 0:0:0:0: [sda] Starting disk
[ 226.856615] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 226.856624] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES)
filtered out
[ 226.864611] ata1.00: configured for UDMA/100
[ 226.976174] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 227.157776] PM: Finishing wakeup.
[ 227.157783] Restarting tasks ... done.
[ 227.891454] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 233.449392] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 233.458700] r8169 0000:04:00.0: eth0: link down
[ 233.459573] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 233.547175] CPU0 attaching NULL sched-domain.
[ 233.547186] CPU1 attaching NULL sched-domain.
[ 233.573239] CPU0 attaching sched-domain:
[ 233.573255] domain 0: span 0-1 level SIBLING
[ 233.573267] groups: group c1ccf70c cpus 0 (cpu_power = 589) group
c1cdf70c cpus 1 (cpu_power = 589)
[ 233.573298] domain 1: span 0-1 level MC
[ 233.573309] groups: group c1ccf778 cpus 0-1 (cpu_power = 1178)
[ 233.573332] CPU1 attaching sched-domain:
[ 233.573342] domain 0: span 0-1 level SIBLING
[ 233.573352] groups: group c1cdf70c cpus 1 (cpu_power = 589) group
c1ccf70c cpus 0 (cpu_power = 589)
[ 233.573380] domain 1: span 0-1 level MC
[ 233.573390] groups: group c1ccf778 cpus 0-1 (cpu_power = 1178)
[ 235.409113] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 235.608121] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 2)
[ 235.615081] wlan0: direct probe responded
[ 235.615099] wlan0: authenticate with AP 62:17:33:55:a7:01 (try 1)
[ 235.619619] wlan0: authenticated
[ 235.619724] wlan0: associate with AP 62:17:33:55:a7:01 (try 1)
[ 235.633471] wlan0: RX AssocResp from 62:17:33:55:a7:01 (capab=0x401
status=0 aid=1)
[ 235.633487] wlan0: associated
[ 235.636313] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 246.520042] wlan0: no IPv6 routers present
[ 358.317131] wlan0: deauthenticating from 62:17:33:55:a7:01 by local
choice (reason=3)
[ 358.344653] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 1)
[ 358.540151] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 2)
[ 358.740198] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 3)
[ 358.940196] wlan0: direct probe to AP aa:17:33:77:4c:91 timed out
[ 364.241322] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 364.440161] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 2)
[ 364.641196] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 3)
[ 364.657800] wlan0: direct probe responded
[ 364.657817] wlan0: authenticate with AP 62:17:33:55:a7:01 (try 1)
[ 364.856192] wlan0: authenticate with AP 62:17:33:55:a7:01 (try 2)
[ 364.864993] wlan0: authenticated
[ 364.865098] wlan0: associate with AP 62:17:33:55:a7:01 (try 1)
[ 364.867644] wlan0: RX AssocResp from 62:17:33:55:a7:01 (capab=0x401
status=0 aid=1)
[ 364.867658] wlan0: associated
[ 433.500204] No probe response from AP 62:17:33:55:a7:01 after
500ms, disconnecting.
[ 434.504179] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 434.704215] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 2)
[ 434.904193] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 3)
[ 435.104204] wlan0: direct probe to AP 62:17:33:55:a7:01 timed out
[ 440.397146] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 1)
[ 440.597073] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 2)
[ 440.797191] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 3)
[ 440.997107] wlan0: direct probe to AP ca:25:15:b5:c3:59 timed out
[ 446.290483] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 1)
[ 446.488163] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 2)
[ 446.491037] wlan0: direct probe responded
[ 446.491051] wlan0: authenticate with AP aa:17:33:77:4c:91 (try 1)
[ 446.688199] wlan0: authenticate with AP aa:17:33:77:4c:91 (try 2)
[ 446.690273] wlan0: authenticated
[ 446.690378] wlan0: associate with AP aa:17:33:77:4c:91 (try 1)
[ 446.694103] wlan0: RX AssocResp from aa:17:33:77:4c:91 (capab=0x401
status=0 aid=1)
[ 446.694117] wlan0: associated
[ 499.504116] No probe response from AP aa:17:33:77:4c:91 after
500ms, disconnecting.
[ 500.543712] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 1)
[ 500.740646] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 2)
[ 500.940125] wlan0: direct probe to AP ca:25:15:b5:c3:59 (try 3)
[ 501.141095] wlan0: direct probe to AP ca:25:15:b5:c3:59 timed out
[ 506.443383] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 1)
[ 506.641185] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 2)
[ 506.841093] wlan0: direct probe to AP aa:17:33:77:4c:91 (try 3)
[ 507.041103] wlan0: direct probe to AP aa:17:33:77:4c:91 timed out
[ 512.348015] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 512.545057] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 2)
[ 512.745074] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 3)
[ 512.944112] wlan0: direct probe to AP 62:17:33:55:a7:01 timed out
[ 515.967702] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 515.970465] wlan0: direct probe responded
[ 515.970478] wlan0: authenticate with AP 62:17:33:55:a7:01 (try 1)
[ 515.976442] wlan0: authenticated
[ 515.976510] wlan0: associate with AP 62:17:33:55:a7:01 (try 1)
[ 515.978910] wlan0: RX AssocResp from 62:17:33:55:a7:01 (capab=0x401
status=0 aid=1)
[ 515.978921] wlan0: associated
[ 521.191317] r8169 0000:04:00.0: eth0: link up
[ 521.191866] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 546.161418] r8169 0000:04:00.0: eth0: link down
[ 570.096671] r8169 0000:04:00.0: eth0: link up
[ 699.500143] No probe response from AP 62:17:33:55:a7:01 after
500ms, disconnecting.
[ 700.504067] wlan0: direct probe to AP 62:17:33:55:a7:01 (try 1)
[ 700.507405] wlan0: direct probe responded
[ 700.507427] wlan0: authenticate with AP 62:17:33:55:a7:01 (try 1)
[ 700.515359] wlan0: authenticated
[ 700.515456] wlan0: associate with AP 62:17:33:55:a7:01 (try 1)
[ 700.528795] wlan0: RX AssocResp from 62:17:33:55:a7:01 (capab=0x401
status=0 aid=1)
[ 700.528806] wlan0: associated
** Model information
not available
** Loaded modules:
Module Size Used by
sco 5885 2
acpi_cpufreq 4951 1
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
cpufreq_userspace 1480 0
l2cap 21721 3 bnep
crc16 1027 1 l2cap
cpufreq_stats 1997 0
bluetooth 36319 5 sco,bnep,l2cap
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
binfmt_misc 4907 1
uinput 4796 1
fuse 44268 1
loop 9769 0
snd_hda_codec_realtek 163318 1
joydev 6739 0
arc4 974 2
ecb 1405 2
snd_hda_intel 16823 1
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
snd_seq 35463 0
snd_timer 12270 2 snd_pcm,snd_seq
i915 223022 2
snd_seq_device 3673 1 snd_seq
b43 132615 0
drm_kms_helper 18569 1 i915
uvcvideo 45554 0
drm 111992 3 i915,drm_kms_helper
dell_laptop 1557 0
snd 34423 10
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
videodev 25605 1 uvcvideo
mac80211 123586 1 b43
i2c_algo_bit 3497 1 i915
psmouse 44809 0
i2c_i801 6462 0
cfg80211 87637 2 b43,mac80211
jmb38x_ms 5502 0
v4l1_compat 10250 2 uvcvideo,videodev
dcdbas 3892 1 dell_laptop
soundcore 3450 1 snd
battery 3782 0
video 14605 1 i915
ac 1640 0
serio_raw 2916 0
pcspkr 1207 0
evdev 5609 24
i2c_core 12787 6
i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801
rfkill 10264 5 bluetooth,dell_laptop,cfg80211
rng_core 2178 1 b43
memstick 4348 1 jmb38x_ms
output 1204 1 video
button 3598 1 i915
processor 26327 3 acpi_cpufreq
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
ext3 94396 1
jbd 32317 1 ext3
mbcache 3762 1 ext3
sd_mod 26005 3
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
ata_piix 17736 2
ssb 33714 1 b43
sdhci_pci 4581 0
libata 115869 2 ata_generic,ata_piix
uhci_hcd 16057 0
pcmcia 16194 2 b43,ssb
sdhci 12171 1 sdhci_pci
ehci_hcd 28693 0
thermal 9206 0
scsi_mod 104853 2 sd_mod,libata
r8169 31333 0
mii 2714 1 r8169
pcmcia_core 20450 3 b43,ssb,pcmcia
mmc_core 38685 3 b43,ssb,sdhci
usbcore 98969 4 uvcvideo,uhci_hcd,ehci_hcd
led_class 1757 2 b43,sdhci
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:21:70:d5:bf:c1 brd ff:ff:ff:ff:ff:ff
inet 82.244.78.81/24 brd 82.244.78.255 scope global eth0
inet6 2a01:e35:2f44:e510:221:70ff:fed5:bfc1/64 scope global dynamic
valid_lft 86394sec preferred_lft 86394sec
inet6 fe80::221:70ff:fed5:bfc1/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:23:08:47:d8:47 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.36/24 brd 192.168.2.255 scope global wlan0
inet6 fe80::223:8ff:fe47:d847/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 3e:56:75:bd:ae:66 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 3800 48 0 0 0 0 0 0
3800 48 0 0 0 0 0 0
eth0: 2141 12 0 0 0 0 0 0
1830 15 0 0 0 0 0 0
wlan0: 88989 106 0 0 0 0 0 0
16144 146 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
156 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
153 incoming packets delivered
173 requests sent out
3 dropped because of missing route
Icmp:
32 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 32
32 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 32
IcmpMsg:
InType3: 32
OutType3: 32
Tcp:
4 active connections openings
0 passive connection openings
0 failed connection attempts
2 connection resets received
0 connections established
76 segments received
73 segments send out
1 segments retransmited
0 bad segments received.
3 resets sent
Udp:
37 packets received
8 packets to unknown port received.
0 packet receive errors
67 packets sent
UdpLite:
TcpExt:
3 delayed acks sent
Quick ack mode was activated 1 times
41 packet headers predicted
5 acknowledgments not containing data payload received
1 other TCP timeouts
1 DSACKs sent for old packets
2 connections reset due to early user close
IpExt:
InBcastPkts: 8
InOctets: 92730
OutOctets: 13778
InBcastOctets: 2558
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express
Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
(prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile
945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
[8086:27a6] (rev 03)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0540000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40400000-407fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family)
IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus
Controller [8086:27da] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
02:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2382]
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
02:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard
SD Host Controller [197b:2381] (prog-if 01)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
02:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host
Controller [197b:2383]
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312
802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:04b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136]
(rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0610000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f0620000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a102 Suyin Corp. Acer/Lenovo Webcam [CN0316]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'proposed-updates'),
(500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---