Bug#708737: BUG: unable to handle kernel NULL pointer dereference
Package: src:linux
Version: 3.2.41-2+deb7u2
Followup-For: Bug #708737
Here is another crash followed by an unscheduled reboot:
[313583.204400] BUG: unable to handle kernel paging request at 51a1d254
[313583.208009] IP: [<c1220cad>] dev_queue_xmit+0x174/0x382
[313583.208009] *pdpt = 0000000011c77001 *pde = 0000000000000000
[313583.208009] Oops: 0000 [#1] SMP
[313583.208009] Modules linked in: iptable_filter ip_tables x_tables sha1_generic hmac cts autofs4 video ac power_supply binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext4 crc16 jbd2 sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1 i82875p_edac edac_core md_mod snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi iTCO_wdt iTCO_vendor_support snd_seq snd_seq_device snd_timer snd rng_core soundcore i2c_i801 i2c_core pcspkr evdev parport_pc ac97_bus parport shpchp button processor ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sr_mod sg cdrom sd_mod crc_t10dif thermal usb_storage ata_generic fan sata_sil floppy thermal_sys ata_piix libata uhci_hcd ehci_hcd firewire_ohci scsi_mod usbcore firewire_core e1000 crc_itu_t usb_common [last unloaded: scsi_wait_scan]
[313583.208009]
[313583.208009] Pid: 28534, comm: postgres Not tainted 3.2.0-4-686-pae #1 Debian 3.2.41-2+deb7u2 /IC7/IC7-G(Intel i875P-ICH5)
[313583.208009] EIP: 0060:[<c1220cad>] EFLAGS: 00010246 CPU: 0
[313583.208009] EIP is at dev_queue_xmit+0x174/0x382
[313583.208009] EAX: 00000000 EBX: 51a1d254 ECX: f3d09480 EDX: 00000000
[313583.208009] ESI: f3d09480 EDI: f44a8080 EBP: f452c000 ESP: f3de1c98
[313583.208009] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[313583.208009] Process postgres (pid: 28534, ti=f3de0000 task=f3e2e980 task.ti=f3de0000)
[313583.208009] Stack:
[313583.208009] f7130430 c1242593 00000001 f7130420 c140bb80 f3c1d300 f1b2c624 00000000
[313583.208009] c12420c2 c1244167 f3d09480 f3d09480 c125b657 f3c1d300 00000018 0100007f
[313583.208009] 0100007f 00000000 f3de1ebc f3c1d300 00000018 f3c1d4ec f3d09480 c125c879
[313583.208009] Call Trace:
[313583.208009] [<c1242593>] ? ip_finish_output2+0x19c/0x1de
[313583.208009] [<c12420c2>] ? dst_output+0x9/0xa
[313583.208009] [<c1244167>] ? ip_send_skb+0xd/0x53
[313583.208009] [<c125b657>] ? udp_send_skb+0x200/0x250
[313583.208009] [<c125c879>] ? udp_sendmsg+0x478/0x65e
[313583.208009] [<c124226d>] ? ip_select_ident+0x33/0x33
[313583.208009] [<c1024949>] ? arch_flush_lazy_mmu_mode+0x5/0x14
[313583.208009] [<c1029105>] ? kmap_atomic_prot+0xcc/0xe0
[313583.208009] [<c12c54fd>] ? do_page_fault+0x2e0/0x2fc
[313583.208009] [<c12c54ea>] ? do_page_fault+0x2cd/0x2fc
[313583.208009] [<c1261f3e>] ? inet_sendmsg+0x47/0x4d
[313583.208009] [<c12115b5>] ? sock_sendmsg+0xa8/0xc2
[313583.208009] [<c1095e82>] ? find_get_page+0x37/0x52
[313583.208009] [<c102a119>] ? should_resched+0x5/0x1e
[313583.208009] [<c12c3387>] ? error_code+0x67/0x6c
[313583.208009] [<c1024949>] ? arch_flush_lazy_mmu_mode+0x5/0x14
[313583.208009] [<c1029105>] ? kmap_atomic_prot+0xcc/0xe0
[313583.208009] [<c109a869>] ? free_pages_prepare+0xcb/0xe7
[313583.208009] [<c109a991>] ? free_hot_cold_page+0x35/0x11d
[313583.208009] [<c109ab8b>] ? __pagevec_free+0x46/0x4f
[313583.208009] [<c10cdbb6>] ? fget_light+0x27/0x67
[313583.208009] [<c1212ce7>] ? sys_sendto+0xed/0x121
[313583.208009] [<c10c0b5d>] ? kmem_cache_free+0x1e/0x4a
[313583.208009] [<c10b83de>] ? free_pages_and_swap_cache+0x41/0x4e
[313583.208009] [<c10ab8fc>] ? tlb_flush_mmu+0x31/0x45
[313583.208009] [<c10ab919>] ? tlb_finish_mmu+0x9/0x27
[313583.208009] [<c10b052d>] ? unmap_region+0xaa/0xb2
[313583.208009] [<c1212d34>] ? sys_send+0x19/0x1d
[313583.208009] [<c121343f>] ? sys_socketcall+0xf2/0x1da
[313583.208009] [<c12c6e1f>] ? sysenter_do_call+0x12/0x28
[313583.208009] Code: 89 46 7e a1 0c 5f 41 c1 85 c0 74 1f 8b 0d 18 5f 41 c1 85 c9 74 15 8b 41 04 89 f2 89 0c 24 ff 11 8b 0c 24 83 c1 08 83 39 00 eb e9 <83> 3b 00 0f 84 39 01 00 00 8b 46 50 89 46 18 8b 53 14 85 d2 74
[313583.208009] EIP: [<c1220cad>] dev_queue_xmit+0x174/0x382 SS:ESP 0068:f3de1c98
[313583.208009] CR2: 0000000051a1d254
[313583.566623] ---[ end trace 06ee1bb71b45ea61 ]---
[313583.571358] Kernel panic - not syncing: Fatal exception in interrupt
[313583.577808] Pid: 28534, comm: postgres Tainted: G D 3.2.0-4-686-pae #1 Debian 3.2.41-2+deb7u2
[313583.587304] Call Trace:
[313583.589871] [<c12bdc77>] ? panic+0x4d/0x141
[313583.594254] [<c12c39b2>] ? oops_end+0x8e/0x99
(No further details could be recovered from the console.)
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/sys-root ro console=ttyS0,115200n8 quiet
** Not tainted
** Kernel log:
[ 2.799128] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.995537] Btrfs loaded
[ 2.996368] scsi 6:0:0:0: Direct-Access I0MEGA UMni64MB*IOM2C4 PQ: 0 ANSI: 2
[ 2.999102] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 2.999717] sd 6:0:0:0: [sde] 126976 512-byte logical blocks: (65.0 MB/62.0 MiB)
[ 3.000342] sd 6:0:0:0: [sde] Write Protect is off
[ 3.000351] sd 6:0:0:0: [sde] Mode Sense: 03 00 00 00
[ 3.000977] sd 6:0:0:0: [sde] No Caching mode page present
[ 3.006504] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 3.016070] sd 6:0:0:0: [sde] No Caching mode page present
[ 3.021572] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 3.051751] sde: sde1 sde2 sde3 sde4
[ 3.056703] sd 6:0:0:0: [sde] No Caching mode page present
[ 3.062205] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 3.068310] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 3.259339] EXT3-fs (dm-0): recovery required on readonly filesystem
[ 3.259344] EXT3-fs (dm-0): write access will be enabled during recovery
[ 3.991611] kjournald starting. Commit interval 5 seconds
[ 3.991648] EXT3-fs (dm-0): recovery complete
[ 3.991957] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 5.194987] udevd[377]: starting version 175
[ 5.418200] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.418213] ACPI: Power Button [PWRB]
[ 5.418392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.418402] ACPI: Power Button [PWRF]
[ 5.453785] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.531405] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.711696] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.711757] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.728488] intel_rng: FWH not detected
[ 5.781875] iTCO_vendor_support: vendor-support=0
[ 5.828908] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.829078] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 5.829190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.284912] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 6.616033] intel8x0_measure_ac97_clock: measured 55894 usecs (2693 samples)
[ 6.616038] intel8x0: clocking to 48000
[ 7.825606] EXT3-fs (dm-0): using internal journal
[ 7.954165] EDAC MC: Ver: 2.1.0
[ 7.957512] EDAC i82875p: i82875p init one
[ 7.957712] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
[ 7.957771] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 8.253714] md: md127 stopped.
[ 8.257526] md: bind<sdd2>
[ 8.257810] md: bind<sdc2>
[ 8.311451] md: raid1 personality registered for level 1
[ 8.312601] bio: create slab <bio-1> at 1
[ 8.314928] md/raid1:md127: active with 2 out of 2 mirrors
[ 8.315116] created bitmap (8 pages) for device md127
[ 8.316517] md127: bitmap initialized from disk: read 1/1 pages, set 0 of 14903 bits
[ 8.338041] md127: detected capacity change from 0 to 1000069464064
[ 8.343172] md127: unknown partition table
[ 8.977364] kjournald starting. Commit interval 5 seconds
[ 8.977388] EXT3-fs (sde3): mounted filesystem with ordered data mode
[ 12.695992] kjournald starting. Commit interval 5 seconds
[ 12.696033] EXT3-fs (sde3): mounted filesystem with ordered data mode
[ 12.818946] Adding 3999996k swap on /dev/mapper/swap1. Priority:0 extents:1 across:3999996k
[ 32.933353] kjournald starting. Commit interval 5 seconds
[ 32.933600] EXT3-fs (sda2): using internal journal
[ 32.933608] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 32.975357] kjournald starting. Commit interval 5 seconds
[ 32.975778] EXT3-fs (dm-6): using internal journal
[ 32.975784] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 33.053480] kjournald starting. Commit interval 5 seconds
[ 33.053880] EXT3-fs (dm-11): using internal journal
[ 33.053886] EXT3-fs (dm-11): mounted filesystem with ordered data mode
[ 33.070047] kjournald starting. Commit interval 5 seconds
[ 33.070465] EXT3-fs (dm-5): using internal journal
[ 33.070471] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 33.132125] kjournald starting. Commit interval 5 seconds
[ 33.132440] EXT3-fs (dm-4): using internal journal
[ 33.132446] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 33.301405] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
[ 33.399847] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 33.521456] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
[ 33.637515] kjournald starting. Commit interval 5 seconds
[ 33.637910] EXT3-fs (dm-8): using internal journal
[ 33.637917] EXT3-fs (dm-8): mounted filesystem with ordered data mode
[ 33.673982] kjournald starting. Commit interval 5 seconds
[ 33.674568] EXT3-fs (dm-3): using internal journal
[ 33.674575] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 33.736420] kjournald starting. Commit interval 5 seconds
[ 33.736451] EXT3-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended
[ 33.736615] EXT3-fs (dm-10): using internal journal
[ 33.736619] EXT3-fs (dm-10): recovery complete
[ 33.736767] EXT3-fs (dm-10): mounted filesystem with ordered data mode
[ 34.945203] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.969729] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 34.969971] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.575060] RPC: Registered named UNIX socket transport module.
[ 38.575065] RPC: Registered udp transport module.
[ 38.575068] RPC: Registered tcp transport module.
[ 38.575071] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 38.612427] FS-Cache: Loaded
[ 38.660315] FS-Cache: Netfs 'nfs' registered for caching
[ 38.682971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 39.181727] fuse init (API version 7.17)
[ 40.919216] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 41.202397] NFSD: starting 90-second grace period
[ 70.855711] postgres (4490): /proc/4490/oom_adj is deprecated, please use /proc/4490/oom_score_adj instead.
** Model information
not available
** Loaded modules:
sha1_generic
hmac
cts
autofs4
video
ac
power_supply
binfmt_misc
fuse
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext4
crc16
jbd2
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
raid1
i82875p_edac
edac_core
md_mod
snd_intel8x0
snd_ac97_codec
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
iTCO_wdt
snd
i2c_i801
iTCO_vendor_support
parport_pc
soundcore
rng_core
i2c_core
parport
ac97_bus
evdev
pcspkr
shpchp
processor
button
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
sg
sd_mod
crc_t10dif
sr_mod
cdrom
usb_storage
ata_generic
thermal
floppy
sata_sil
fan
thermal_sys
firewire_ohci
ata_piix
firewire_core
uhci_hcd
libata
crc_itu_t
ehci_hcd
scsi_mod
usbcore
e1000
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller [8086:2579] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f40fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00008000-00009fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: f3000000-f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at f4100400 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f4101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
02:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet Controller [8086:1075]
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
03:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:03.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 8400 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at f2005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
03:09.0 VGA compatible controller [0300]: NVIDIA Corporation NV4 [RIVA TNT] [10de:0020] (rev 04) (prog-if 00 [VGA controller])
Subsystem: STB Systems Inc Velocity 4400 [10b4:2740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f3000000 (32-bit, prefetchable) [size=16M]
[virtual] Expansion ROM at f0080000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 4146:4146 USBest Technology
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.2 3.2.41-2+deb7u2
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: