Bug#708737: BUG: unable to handle kernel NULL pointer dereference
Package: src:linux
Version: 3.2.41-2+deb7u2
Severity: important
This crash was soon followed by an unscheduled reboot:
[33983.076838] BUG: unable to handle kernel NULL pointer dereference at 000000d8
[33983.080006] IP: [<c10dc57d>] inode_init_always+0x139/0x18a
[33983.080006] *pdpt = 00000000139ee001 *pde = 0000000000000000
[33983.080006] Oops: 0000 [#1] SMP
[33983.080006] Modules linked in: iptable_filter ip_tables x_tables loop ext4 crc16 jbd2 autofs4 sha1_generic hmac cts video ac power_supply binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1 i82875p_edac edac_core md_mod snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer iTCO_wdt snd iTCO_vendor_support pcspkr soundcore evdev ac97_bus i2c_i801 rng_core i2c_core parport_pc parport shpchp button processor ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sr_mod cdrom sd_mod crc_t10dif usb_storage ata_generic floppy sata_sil fan uhci_hcd firewire_ohci ata_piix thermal thermal_sys libata firewire_core crc_itu_t ehci_hcd scsi_mod e1000 usbcore usb_common [last unloaded: scsi_wait_scan]
[33983.109134]
[33983.109134] Pid: 17603, comm: sed Not tainted 3.2.0-4-686-pae #1 Debian 3.2.41-2+deb7u2 /IC7/IC7-G(Intel i875P-ICH5)
[33983.109134] EIP: 0060:[<c10dc57d>] EFLAGS: 00010202 CPU: 1
[33983.109134] EIP is at inode_init_always+0x139/0x18a
[33983.109134] EAX: 000000d0 EBX: c5ef8be8 ECX: c14f94e8 EDX: c5ef8c58
[33983.109134] ESI: f442a000 EDI: c5ef8d18 EBP: f2f41db8 ESP: f2f41d80
[33983.109134] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[33983.109134] Process sed (pid: 17603, ti=f2f40000 task=f1c4fb00 task.ti=f2f40000)
[33983.109134] Stack:
[33983.109134] 00000000 00000001 00000000 c1412c80 f79e5394 c1024949 c1029105 00002c2d
[33983.109134] 00002c2d f4bbe000 c1024949 c5ef8be8 f442a000 f2f41e00 f792d234 c10dc5ff
[33983.109134] c102901b 00000000 f4425e00 00000246 000000d0 00000246 c10c1a79 000000d0
[33983.109134] Call Trace:
[33983.109134] [<c1024949>] ? arch_flush_lazy_mmu_mode+0x5/0x14
[33983.109134] [<c1029105>] ? kmap_atomic_prot+0xcc/0xe0
[33983.109134] [<c1024949>] ? arch_flush_lazy_mmu_mode+0x5/0x14
[33983.109134] [<c10dc5ff>] ? alloc_inode+0x31/0x5b
[33983.109134] [<c102901b>] ? __kunmap_atomic+0x62/0x6f
[33983.109134] [<c10c1a79>] ? kmem_cache_alloc+0x39/0x89
[33983.109134] [<c11027bf>] ? proc_alloc_inode+0x58/0x6f
[33983.292009] [<c10dc5ff>] ? alloc_inode+0x31/0x5b
[33983.292009] [<c10dce1c>] ? iget_locked+0x45/0xb4
[33983.292009] [<c1102c11>] ? proc_get_inode+0xb/0xbb
[33983.292009] [<c1106c83>] ? proc_lookup_de+0x44/0x90
[33983.292009] [<c1102dc2>] ? proc_root_lookup+0xe/0x26
[33983.292009] [<c10d38d8>] ? d_alloc_and_lookup+0x2c/0x49
[33983.292009] [<c10d42b9>] ? walk_component+0x1f2/0x384
[33983.292009] [<c10d5cb7>] ? do_last+0xf3/0x513
[33983.292009] [<c10d637e>] ? path_openat+0xa1/0x28b
[33983.292009] [<c10d6611>] ? do_filp_open+0x23/0x5c
[33983.292009] [<c102a119>] ? should_resched+0x5/0x1e
[33983.292009] [<c12c1631>] ? _cond_resched+0x5/0x18
[33983.292009] [<c10cc068>] ? do_sys_open+0x54/0xcd
[33983.292009] [<c10cc0ff>] ? sys_open+0x1e/0x23
[33983.292009] [<c12c6e1f>] ? sysenter_do_call+0x12/0x28
[33983.292009] Code: 00 02 00 c7 83 24 01 00 00 00 00 00 00 c7 83 14 01 00 00 c0 dc 3e c1 c7 83 08 01 00 00 00 00 00 00 8b 86 d0 00 00 00 85 c0 74 0f <8b> 40 08 8b 40 20 8b 40 4c 89 83 14 01 00 00 8d 83 c8 00 00 00
[33983.292009] EIP: [<c10dc57d>] inode_init_always+0x139/0x18a SS:ESP 0068:f2f41d80
[33983.292009] CR2: 00000000000000d8
[33983.395919] ---[ end trace 06671fc6cb61b9cb ]---
See also bugs #707867 and #708064 for possibly related instability.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/sys-root ro console=ttyS0,115200n8 quiet
** Not tainted
** Kernel log:
[ 3.375912] EXT3-fs (dm-0): write access will be enabled during recovery
[ 4.172880] kjournald starting. Commit interval 5 seconds
[ 4.172916] EXT3-fs (dm-0): recovery complete
[ 4.173222] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 5.302181] udevd[375]: starting version 175
[ 5.569315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.583685] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.583699] ACPI: Power Button [PWRB]
[ 5.583871] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.583881] ACPI: Power Button [PWRF]
[ 5.655149] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.740927] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.740981] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.943783] intel_rng: FWH not detected
[ 5.980435] iTCO_vendor_support: vendor-support=0
[ 5.994480] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.994671] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 5.994784] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.357447] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 6.692032] intel8x0_measure_ac97_clock: measured 55840 usecs (2691 samples)
[ 6.692037] intel8x0: clocking to 48000
[ 7.857824] EXT3-fs (dm-0): using internal journal
[ 7.969042] EDAC MC: Ver: 2.1.0
[ 7.973011] EDAC i82875p: i82875p init one
[ 7.973437] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
[ 7.973499] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 8.201532] md: md127 stopped.
[ 8.205079] md: bind<sdd2>
[ 8.205336] md: bind<sdc2>
[ 8.293219] md: raid1 personality registered for level 1
[ 8.293595] bio: create slab <bio-1> at 1
[ 8.293762] md/raid1:md127: active with 2 out of 2 mirrors
[ 8.293911] created bitmap (8 pages) for device md127
[ 8.294747] md127: bitmap initialized from disk: read 1/1 pages, set 1 of 14905 bits
[ 8.316916] md127: detected capacity change from 0 to 1000203710464
[ 8.319824] md127: unknown partition table
[ 9.026028] kjournald starting. Commit interval 5 seconds
[ 9.026057] EXT3-fs (sde3): mounted filesystem with ordered data mode
[ 12.644801] kjournald starting. Commit interval 5 seconds
[ 12.644828] EXT3-fs (sde3): mounted filesystem with ordered data mode
[ 12.767806] Adding 3999996k swap on /dev/mapper/swap1. Priority:0 extents:1 across:3999996k
[ 100.954992] kjournald starting. Commit interval 5 seconds
[ 100.955239] EXT3-fs (sda2): using internal journal
[ 100.955246] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 100.996975] kjournald starting. Commit interval 5 seconds
[ 100.997402] EXT3-fs (dm-7): using internal journal
[ 100.997408] EXT3-fs (dm-7): mounted filesystem with ordered data mode
[ 101.075100] kjournald starting. Commit interval 5 seconds
[ 101.075526] EXT3-fs (dm-13): using internal journal
[ 101.075532] EXT3-fs (dm-13): mounted filesystem with ordered data mode
[ 101.091664] kjournald starting. Commit interval 5 seconds
[ 101.092070] EXT3-fs (dm-6): using internal journal
[ 101.092076] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 101.153744] kjournald starting. Commit interval 5 seconds
[ 101.154096] EXT3-fs (dm-5): using internal journal
[ 101.154102] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 101.290013] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal
[ 101.290028] REISERFS (device dm-4): using ordered data mode
[ 101.290031] reiserfs: using flush barriers
[ 101.298186] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 101.298627] REISERFS (device dm-4): checking transaction log (dm-4)
[ 101.351507] REISERFS (device dm-4): Using r5 hash to sort names
[ 101.371515] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
[ 101.371554] REISERFS (device dm-2): using ordered data mode
[ 101.371557] reiserfs: using flush barriers
[ 101.389729] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 101.390207] REISERFS (device dm-2): checking transaction log (dm-2)
[ 101.520564] REISERFS (device dm-2): Using r5 hash to sort names
[ 101.657056] REISERFS (device dm-8): found reiserfs format "3.6" with standard journal
[ 101.657082] REISERFS (device dm-8): using ordered data mode
[ 101.657085] reiserfs: using flush barriers
[ 101.660804] REISERFS (device dm-8): journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 101.661299] REISERFS (device dm-8): checking transaction log (dm-8)
[ 101.702544] REISERFS (device dm-8): Using r5 hash to sort names
[ 101.792480] kjournald starting. Commit interval 5 seconds
[ 101.792875] EXT3-fs (dm-10): using internal journal
[ 101.792881] EXT3-fs (dm-10): mounted filesystem with ordered data mode
[ 101.866460] kjournald starting. Commit interval 5 seconds
[ 101.867044] EXT3-fs (dm-3): using internal journal
[ 101.867050] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 101.917073] kjournald starting. Commit interval 5 seconds
[ 101.917108] EXT3-fs (dm-12): warning: maximal mount count reached, running e2fsck is recommended
[ 101.917271] EXT3-fs (dm-12): using internal journal
[ 101.917275] EXT3-fs (dm-12): recovery complete
[ 101.917423] EXT3-fs (dm-12): mounted filesystem with ordered data mode
[ 103.108505] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 103.133688] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 103.133908] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 105.934876] RPC: Registered named UNIX socket transport module.
[ 105.934883] RPC: Registered udp transport module.
[ 105.934888] RPC: Registered tcp transport module.
[ 105.934893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 105.984120] FS-Cache: Loaded
[ 106.032040] FS-Cache: Netfs 'nfs' registered for caching
[ 106.054516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 106.444932] fuse init (API version 7.17)
[ 108.202645] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 108.483652] NFSD: starting 90-second grace period
[ 136.985933] postgres (4629): /proc/4629/oom_adj is deprecated, please use /proc/4629/oom_score_adj instead.
[ 511.665602] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
** Model information
not available
** Loaded modules:
sha1_generic
hmac
cts
autofs4
video
ac
power_supply
binfmt_misc
fuse
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
reiserfs
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
raid1
md_mod
i82875p_edac
edac_core
snd_intel8x0
snd_ac97_codec
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
soundcore
ac97_bus
iTCO_wdt
iTCO_vendor_support
rng_core
parport_pc
parport
i2c_i801
i2c_core
pcspkr
evdev
processor
button
shpchp
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
sr_mod
sg
cdrom
sd_mod
crc_t10dif
usb_storage
ata_generic
sata_sil
thermal
fan
thermal_sys
uhci_hcd
ata_piix
libata
floppy
firewire_ohci
scsi_mod
ehci_hcd
firewire_core
crc_itu_t
e1000
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller [8086:2579] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f40fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00008000-00009fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: f3000000-f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at f4100400 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f4101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
02:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet Controller [8086:1075]
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
03:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:03.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 8400 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at f2005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
03:09.0 VGA compatible controller [0300]: NVIDIA Corporation NV4 [RIVA TNT] [10de:0020] (rev 04) (prog-if 00 [VGA controller])
Subsystem: STB Systems Inc Velocity 4400 [10b4:2740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f3000000 (32-bit, prefetchable) [size=16M]
[virtual] Expansion ROM at f0080000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 4146:4146 USBest Technology
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.2 3.2.41-2+deb7u2
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
Reply to: