Bug#706588: Re: Bug#706588: installation-reports: display blackout after rebooting
Dear Maintener,
>
>Can you try installing a newer kernel (e.g. 3.8 from experimental), and
>see if things work better (without the nomodeset parameter)?
I installed kernel 3.8 from experimental, but there is a same situation (moni
to is blackouted).
# apt-get -b source linux-image-3.8-trunk-amd64
# dpkg --auto-deconfigure -i linux-image-3.8-trunk-amd64_3.8.5-1~experimental.
1_amd64.deb linux-libc-dev_3.8.5-1~experimental.1_amd64.deb
...
# uname -a
Linux server02 3.8-trunk-amd64 #1 SMP Debian 3.8.5-1~experimental.1 x86_64 GNU
/Linux
dmesg:
[ 6.066778] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 6.070547] nouveau 0000:01:00.0: No connectors reported connected with mod
es
[ 6.070549] [drm] Cannot find any crtc or sizes - going 1024x768
Cheers,
---
Takeo Terada <cxk05403@nifty.com>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.5-1~experimental.1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64 root=UUID=80b32376-e4af-4141-a3b9-2ff5998baac2 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dce5bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dce5c000-0x00000000dcf17fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf18000-0x00000000df698fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df699000-0x00000000df6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df6bf000-0x00000000df752fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df753000-0x00000000df7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df7bf000-0x00000000df7e8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df7e9000-0x00000000df7f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7f2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df7f3000-0x00000000df7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DP67BG, BIOS BGP6710J.86A.2161.2012.0214.2350 02/14/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21f7fffff]
[ 0.000000] [mem 0x100000000-0x21f7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21f7fffff @ [mem 0xdf7e3000-0xdf7e8fff]
[ 0.000000] RAMDISK: [mem 0x36aaa000-0x3754cfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000df7fd120 0005C (v01 INTEL BGP6710J 00000871 01000013)
[ 0.000000] ACPI: FACP 00000000df7fc000 000F4 (v03 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000df7f8000 037FC (v02 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000df768000 00040
[ 0.000000] ACPI: APIC 00000000df7f7000 000BC (v02 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000df7f6000 0003C (v01 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: ASF! 00000000df7f5000 000A5 (v32 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000df7f4000 00038 (v01 INTEL BGP6710J 00000871 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000df7ea000 078CC (v01 INTEL SSDT PM 00000871 MSFT 0100000D)
[ 0.000000] ACPI: ASPT 00000000df7f3000 00034 (v07 INTEL PerfTune 00000871 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f7fffff]
[ 0.000000] NODE_DATA [mem 0x21f7fc000-0x21f7fffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216e00000-ffff88021dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00100000-0xdce5bfff]
[ 0.000000] node 0: [mem 0xdcf18000-0xdf698fff]
[ 0.000000] node 0: [mem 0xdf6bf000-0xdf752fff]
[ 0.000000] node 0: [mem 0xdf7bf000-0xdf7e8fff]
[ 0.000000] node 0: [mem 0xdf7f2000-0xdf7f2fff]
[ 0.000000] node 0: [mem 0xdf7ff000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x21f7fffff]
[ 0.000000] On node 0 totalpages: 2092572
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3905 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12456 pages used for memmap
[ 0.000000] DMA32 zone: 898549 pages, LIFO batch:31
[ 0.000000] Normal zone: 16100 pages used for memmap
[ 0.000000] Normal zone: 1161500 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dce5c000 - 00000000dcf18000
[ 0.000000] PM: Registered nosave memory: 00000000df699000 - 00000000df6bf000
[ 0.000000] PM: Registered nosave memory: 00000000df753000 - 00000000df7bf000
[ 0.000000] PM: Registered nosave memory: 00000000df7e9000 - 00000000df7f2000
[ 0.000000] PM: Registered nosave memory: 00000000df7f3000 - 00000000df7ff000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 0000000100000000
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f400000 s84032 r8192 d22464 u262144
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063954
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64 root=UUID=80b32376-e4af-4141-a3b9-2ff5998baac2 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8167128k/8904704k available (3626k kernel code, 534416k absent, 203160k reserved, 3112k data, 616k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3459.783 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6919.56 BogoMIPS (lpj=13839132)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000370] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001658] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002198] Mount-cache hash table entries: 256
[ 0.002330] Initializing cgroup subsys cpuacct
[ 0.002332] Initializing cgroup subsys memory
[ 0.002340] Initializing cgroup subsys devices
[ 0.002342] Initializing cgroup subsys freezer
[ 0.002343] Initializing cgroup subsys net_cls
[ 0.002344] Initializing cgroup subsys blkio
[ 0.002345] Initializing cgroup subsys perf_event
[ 0.002365] CPU: Physical Processor ID: 0
[ 0.002366] CPU: Processor Core ID: 0
[ 0.002369] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002369] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002372] mce: CPU supports 9 MCE banks
[ 0.002382] CPU0: Thermal monitoring enabled (TM1)
[ 0.002388] process: using mwait in idle threads
[ 0.002391] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002391] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002391] tlb_flushall_shift: 5
[ 0.002464] Freeing SMP alternatives: 12k freed
[ 0.002762] ACPI: Core revision 20121018
[ 0.008303] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047856] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.047861] TSC deadline timer enabled
[ 0.047865] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.047869] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.047871] ... version: 3
[ 0.047872] ... bit width: 48
[ 0.047872] ... generic registers: 4
[ 0.047873] ... value mask: 0000ffffffffffff
[ 0.047874] ... max period: 000000007fffffff
[ 0.047875] ... fixed-purpose events: 3
[ 0.047875] ... event mask: 000000070000000f
[ 0.061397] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.048080] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.140454] Brought up 8 CPUs
[ 0.140457] smpboot: Total of 8 processors activated (55356.52 BogoMIPS)
[ 0.146697] devtmpfs: initialized
[ 0.149176] PM: Registering ACPI NVS region [mem 0xdce5c000-0xdcf17fff] (770048 bytes)
[ 0.149202] PM: Registering ACPI NVS region [mem 0xdf753000-0xdf7befff] (442368 bytes)
[ 0.149299] regulator-dummy: no parameters
[ 0.149347] NET: Registered protocol family 16
[ 0.149443] ACPI: bus type pci registered
[ 0.149496] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.149498] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.152483] PCI: Using configuration type 1 for base access
[ 0.153078] bio: create slab <bio-0> at 0
[ 0.153137] ACPI: Added _OSI(Module Device)
[ 0.153138] ACPI: Added _OSI(Processor Device)
[ 0.153139] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153140] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153686] ACPI: EC: Look up EC in DSDT
[ 0.159262] ACPI: Interpreter enabled
[ 0.159265] ACPI: (supports S0 S3 S4 S5)
[ 0.159276] ACPI: Using IOAPIC for interrupt routing
[ 0.161850] ACPI: No dock devices found.
[ 0.161853] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.161926] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.161928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162177] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.162278] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.162420] PCI host bridge to bus 0000:00
[ 0.162422] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.162424] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.162429] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.162431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.162433] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.162439] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.162466] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.162488] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.162527] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.162549] pci 0000:00:16.0: reg 10: [mem 0xf3327100-0xf332710f 64bit]
[ 0.162619] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.162646] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.162663] pci 0000:00:19.0: reg 10: [mem 0xf3300000-0xf331ffff]
[ 0.162670] pci 0000:00:19.0: reg 14: [mem 0xf3325000-0xf3325fff]
[ 0.162678] pci 0000:00:19.0: reg 18: [io 0x3040-0x305f]
[ 0.162734] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.162758] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.163570] pci 0000:00:1a.0: reg 10: [mem 0xf3326c00-0xf3326fff]
[ 0.168399] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.168424] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.168437] pci 0000:00:1b.0: reg 10: [mem 0xf3320000-0xf3323fff 64bit]
[ 0.168497] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.168518] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.168588] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.168611] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.168681] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.168706] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.168776] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.168801] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.168871] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.168898] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.169714] pci 0000:00:1d.0: reg 10: [mem 0xf3326800-0xf3326bff]
[ 0.174521] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.174546] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.174660] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.174676] pci 0000:00:1f.2: reg 10: [io 0x3068-0x306f]
[ 0.174683] pci 0000:00:1f.2: reg 14: [io 0x3074-0x3077]
[ 0.174691] pci 0000:00:1f.2: reg 18: [io 0x3060-0x3067]
[ 0.174698] pci 0000:00:1f.2: reg 1c: [io 0x3070-0x3073]
[ 0.174705] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.174712] pci 0000:00:1f.2: reg 24: [mem 0xf3326000-0xf33267ff]
[ 0.174751] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.174768] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.174781] pci 0000:00:1f.3: reg 10: [mem 0xf3327000-0xf33270ff 64bit]
[ 0.174800] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.174913] pci 0000:01:00.0: [10de:0400] type 00 class 0x030000
[ 0.174959] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[ 0.174994] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.175024] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit]
[ 0.175045] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.175066] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.175291] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.175293] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.175295] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 0.175298] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.175337] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.175409] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.175433] pci 0000:03:00.0: reg 10: [mem 0xf3200000-0xf3201fff 64bit]
[ 0.175560] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.182915] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.182925] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf32fffff]
[ 0.183017] pci 0000:04:00.0: [10e3:8113] type 01 class 0x060401
[ 0.183105] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.183121] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.183126] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.183195] pci 0000:05:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.183230] pci 0000:05:03.0: reg 10: [mem 0xf3104000-0xf31047ff]
[ 0.183251] pci 0000:05:03.0: reg 14: [mem 0xf3100000-0xf3103fff]
[ 0.183408] pci 0000:05:03.0: supports D1 D2
[ 0.183409] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.183501] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.183513] pci 0000:04:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.183522] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.183523] pci 0000:04:00.0: bridge window [mem 0xf3100000-0xf31fffff] (subtractive decode)
[ 0.183525] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.183526] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.183596] pci 0000:06:00.0: [11ab:6121] type 00 class 0x01018f
[ 0.183615] pci 0000:06:00.0: reg 10: [io 0x1018-0x101f]
[ 0.183628] pci 0000:06:00.0: reg 14: [io 0x1024-0x1027]
[ 0.183641] pci 0000:06:00.0: reg 18: [io 0x1010-0x1017]
[ 0.183655] pci 0000:06:00.0: reg 1c: [io 0x1020-0x1023]
[ 0.183668] pci 0000:06:00.0: reg 20: [io 0x1000-0x100f]
[ 0.183681] pci 0000:06:00.0: reg 24: [mem 0xf3000000-0xf30003ff]
[ 0.183756] pci 0000:06:00.0: supports D1
[ 0.183758] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.183781] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.183790] pci 0000:00:1c.7: PCI bridge to [bus 06]
[ 0.183794] pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
[ 0.183797] pci 0000:00:1c.7: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.183830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.183868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.183902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.183941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 0.183982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.184600] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.184640] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.184678] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.184714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.184751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.184788] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.184826] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.184863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.184947] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.184948] vgaarb: loaded
[ 0.184949] vgaarb: bridge control possible 0000:01:00.0
[ 0.184978] PCI: Using ACPI for IRQ routing
[ 0.186300] PCI: pci_cache_line_size set to 64 bytes
[ 0.186399] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.186401] e820: reserve RAM buffer [mem 0xdce5c000-0xdfffffff]
[ 0.186402] e820: reserve RAM buffer [mem 0xdf699000-0xdfffffff]
[ 0.186403] e820: reserve RAM buffer [mem 0xdf753000-0xdfffffff]
[ 0.186404] e820: reserve RAM buffer [mem 0xdf7e9000-0xdfffffff]
[ 0.186406] e820: reserve RAM buffer [mem 0xdf7f3000-0xdfffffff]
[ 0.186407] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.186408] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[ 0.186492] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.186495] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.188500] Switching to clocksource hpet
[ 0.189711] pnp: PnP ACPI init
[ 0.189719] ACPI: bus type pnp registered
[ 0.189757] system 00:00: [mem 0xf8000000-0xffffffff] could not be reserved
[ 0.189759] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.189843] pnp 00:01: [dma 4]
[ 0.189857] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.189880] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.189901] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.189919] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.189949] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.189951] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.189982] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.189983] system 00:06: [io 0x0400-0x0453] has been reserved
[ 0.189985] system 00:06: [io 0x0458-0x047f] has been reserved
[ 0.189987] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.189988] system 00:06: [io 0x0290-0x02af] has been reserved
[ 0.189990] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190032] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190109] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.190167] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.190173] pnp: PnP ACPI: found 10 devices
[ 0.190174] ACPI: ACPI bus type pnp unregistered
[ 0.195909] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.195930] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.195932] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.195951] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04-05] add_size 1000
[ 0.195953] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000
[ 0.195962] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.195967] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.195968] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.195970] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.195971] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.195973] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.195976] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.195978] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.195980] pci 0000:00:1c.7: BAR 15: assigned [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.195982] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.195984] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.195986] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.195988] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.195990] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.195992] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 0.195994] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.195996] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.196006] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.196009] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.196014] pci 0000:00:1c.1: bridge window [mem 0xf3200000-0xf32fffff]
[ 0.196018] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.196023] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.196030] pci 0000:04:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.196042] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.196045] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.196049] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.196053] pci 0000:00:1c.3: bridge window [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.196059] pci 0000:00:1c.7: PCI bridge to [bus 06]
[ 0.196061] pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
[ 0.196066] pci 0000:00:1c.7: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.196070] pci 0000:00:1c.7: bridge window [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.196103] pci 0000:04:00.0: setting latency timer to 64
[ 0.196110] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.196111] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.196112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.196114] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xf7ffffff]
[ 0.196115] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.196116] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[ 0.196118] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196119] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.196120] pci_bus 0000:03: resource 1 [mem 0xf3200000-0xf32fffff]
[ 0.196122] pci_bus 0000:03: resource 2 [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.196123] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.196124] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.196125] pci_bus 0000:04: resource 2 [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.196127] pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.196128] pci_bus 0000:05: resource 4 [io 0x5000-0x5fff]
[ 0.196129] pci_bus 0000:05: resource 5 [mem 0xf3100000-0xf31fffff]
[ 0.196131] pci_bus 0000:05: resource 6 [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.196132] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.196133] pci_bus 0000:06: resource 1 [mem 0xf3000000-0xf30fffff]
[ 0.196135] pci_bus 0000:06: resource 2 [mem 0xf3800000-0xf39fffff 64bit pref]
[ 0.196205] NET: Registered protocol family 2
[ 0.196398] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.196552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.196642] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.196655] TCP: reno registered
[ 0.196664] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.196686] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.196771] NET: Registered protocol family 1
[ 0.228505] pci 0000:01:00.0: Boot video device
[ 0.228577] PCI: CLS 64 bytes, default 64
[ 0.228603] Unpacking initramfs...
[ 0.372803] Freeing initrd memory: 10892k freed
[ 0.373819] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.373824] software IO TLB [mem 0xd8e5c000-0xdce5c000] (64MB) mapped at [ffff8800d8e5c000-ffff8800dce5bfff]
[ 0.374287] audit: initializing netlink socket (disabled)
[ 0.374301] type=2000 audit(1367606755.364:1): initialized
[ 0.384574] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.385042] VFS: Disk quotas dquot_6.5.2
[ 0.385066] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.385133] msgmni has been set to 15972
[ 0.385294] alg: No test for stdrng (krng)
[ 0.385316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.385339] io scheduler noop registered
[ 0.385340] io scheduler deadline registered
[ 0.385365] io scheduler cfq registered (default)
[ 0.385438] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.385519] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.385606] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.385692] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.385777] pcieport 0000:00:1c.7: irq 44 for MSI/MSI-X
[ 0.385846] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.385847] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.385849] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.385866] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.385870] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.385884] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.385886] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.385890] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.385905] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.385906] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.385908] pci 0000:05:03.0: Signaling PME through PCIe PME interrupt
[ 0.385911] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.385927] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.385929] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.385933] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.385942] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.385952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.385953] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.386131] intel_idle: MWAIT substates: 0x1120
[ 0.386132] intel_idle: v0.4 model 0x2A
[ 0.386133] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.386155] GHES: HEST is not enabled!
[ 0.386190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.386491] Linux agpgart interface v0.103
[ 0.386575] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.389408] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.389411] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.389487] mousedev: PS/2 mouse device common for all mice
[ 0.389519] rtc_cmos 00:02: RTC can wake from S4
[ 0.389624] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.389653] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.389751] cpuidle: using governor ladder
[ 0.389872] cpuidle: using governor menu
[ 0.389903] drop_monitor: Initializing network drop monitor service
[ 0.389955] TCP: cubic registered
[ 0.390103] NET: Registered protocol family 10
[ 0.390297] mip6: Mobile IPv6
[ 0.390299] NET: Registered protocol family 17
[ 0.390536] PM: Hibernation image not present or could not be loaded.
[ 0.390544] registered taskstats version 1
[ 0.391485] rtc_cmos 00:02: setting system clock to 2013-05-03 18:45:55 UTC (1367606755)
[ 0.392362] Freeing unused kernel memory: 616k freed
[ 0.392419] Write protecting the kernel read-only data: 6144k
[ 0.393616] Freeing unused kernel memory: 460k freed
[ 0.394879] Freeing unused kernel memory: 540k freed
[ 0.403350] udevd[90]: starting version 175
[ 0.411363] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 0.411366] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.411403] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.411458] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.411491] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 0.412388] ACPI: bus type usb registered
[ 0.412418] usbcore: registered new interface driver usbfs
[ 0.412431] usbcore: registered new interface driver hub
[ 0.412568] SCSI subsystem initialized
[ 0.412968] usbcore: registered new device driver usb
[ 0.413298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.413515] ACPI: bus type scsi registered
[ 0.413556] ehci-pci: EHCI PCI platform driver
[ 0.413621] libata version 3.00 loaded.
[ 0.413624] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.413633] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 0.413873] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 0.413880] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 0.413884] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 0.413890] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 0.413896] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 0.413902] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 0.413906] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
[ 0.413909] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
[ 0.414046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.414047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.414049] usb usb1: Product: xHCI Host Controller
[ 0.414050] usb usb1: Manufacturer: Linux 3.8-trunk-amd64 xhci_hcd
[ 0.414052] usb usb1: SerialNumber: 0000:03:00.0
[ 0.414151] xHCI xhci_add_endpoint called for root hub
[ 0.414152] xHCI xhci_check_bandwidth called for root hub
[ 0.414191] hub 1-0:1.0: USB hub found
[ 0.414197] hub 1-0:1.0: 2 ports detected
[ 0.414253] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.414255] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.417141] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.417144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.417146] usb usb2: Product: xHCI Host Controller
[ 0.417148] usb usb2: Manufacturer: Linux 3.8-trunk-amd64 xhci_hcd
[ 0.417150] usb usb2: SerialNumber: 0000:03:00.0
[ 0.417242] xHCI xhci_add_endpoint called for root hub
[ 0.417244] xHCI xhci_check_bandwidth called for root hub
[ 0.417273] hub 2-0:1.0: USB hub found
[ 0.417286] hub 2-0:1.0: 2 ports detected
[ 0.479701] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.673458] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:4d:e5:0d
[ 0.673460] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.673513] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 0.673604] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.673611] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.673619] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.673637] ehci-pci 0000:00:1a.0: debug port 2
[ 0.677515] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.677528] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3326c00
[ 0.686890] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.686919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.686923] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686926] usb usb3: Product: EHCI Host Controller
[ 0.686928] usb usb3: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 0.686931] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.687039] hub 3-0:1.0: USB hub found
[ 0.687043] hub 3-0:1.0: 2 ports detected
[ 0.687132] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.687136] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.687139] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.687150] ehci-pci 0000:00:1d.0: debug port 2
[ 0.691020] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.691033] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3326800
[ 0.702820] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.702841] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.702844] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702847] usb usb4: Product: EHCI Host Controller
[ 0.702849] usb usb4: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 0.702851] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.703006] hub 4-0:1.0: USB hub found
[ 0.703010] hub 4-0:1.0: 2 ports detected
[ 0.703072] ahci 0000:00:1f.2: version 3.0
[ 0.703126] ahci 0000:00:1f.2: irq 54 for MSI/MSI-X
[ 0.718824] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.718831] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.718838] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.759113] scsi0 : ahci
[ 0.759342] scsi1 : ahci
[ 0.759488] scsi2 : ahci
[ 0.759641] scsi3 : ahci
[ 0.759785] scsi4 : ahci
[ 0.759897] scsi5 : ahci
[ 0.759938] ata1: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326100 irq 54
[ 0.759940] ata2: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326180 irq 54
[ 0.759943] ata3: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326200 irq 54
[ 0.759945] ata4: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326280 irq 54
[ 0.759947] ata5: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326300 irq 54
[ 0.759950] ata6: SATA max UDMA/133 abar m2048@0xf3326000 port 0xf3326380 irq 54
[ 0.978088] firewire_core 0000:05:03.0: created device fw0: GUID 00224dffff4e2d1d, S400
[ 0.997893] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.077634] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.077667] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.077693] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.077722] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.077743] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.085603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.085728] ata3.00: ATAPI: HL-DT-ST BD-RE BH12NS30, EL00, max UDMA/133
[ 1.089686] ata3.00: configured for UDMA/133
[ 1.124658] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 1.124663] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.129865] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.129870] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.130129] hub 3-1:1.0: USB hub found
[ 1.130214] hub 3-1:1.0: 6 ports detected
[ 1.182779] ata1.00: configured for UDMA/133
[ 1.182984] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 1.191846] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH12NS30 EL00 PQ: 0 ANSI: 5
[ 1.192853] scsi6 : pata_marvell
[ 1.193010] scsi7 : pata_marvell
[ 1.193061] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 19
[ 1.193062] ata8: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 19
[ 1.194892] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.194915] sd 0:0:0:0: [sda] Write Protect is off
[ 1.194917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.194926] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.209091] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.209095] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.209293] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.210376] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.210413] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.241038] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.250682] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.251116] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.368633] tsc: Refined TSC clocksource calibration: 3459.713 MHz
[ 1.368639] Switching to clocksource tsc
[ 1.377036] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.377042] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.377292] hub 4-1:1.0: USB hub found
[ 1.377394] hub 4-1:1.0: 8 ports detected
[ 1.448580] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.544438] usb 3-1.5: New USB device found, idVendor=0409, idProduct=005a
[ 1.544441] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.544729] hub 3-1.5:1.0: USB hub found
[ 1.544844] hub 3-1.5:1.0: 3 ports detected
[ 1.647721] usb 4-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.756774] usb 4-1.1: New USB device found, idVendor=0db0, idProduct=3871
[ 1.756779] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.756782] usb 4-1.1: Product: 802.11 n WLAN
[ 1.756785] usb 4-1.1: Manufacturer: Ralink
[ 1.756787] usb 4-1.1: SerialNumber: 1.0
[ 1.827291] usb 4-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.022177] usb 4-1.2: New USB device found, idVendor=0db0, idProduct=a871
[ 2.022182] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.094295] usb 4-1.7: new full-speed USB device number 5 using ehci-pci
[ 2.189546] usb 4-1.7: New USB device found, idVendor=046d, idProduct=c51a
[ 2.189552] usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.189555] usb 4-1.7: Product: USB Receiver
[ 2.189557] usb 4-1.7: Manufacturer: Logitech
[ 2.195331] usbcore: registered new interface driver usbhid
[ 2.195334] usbhid: USB HID core driver
[ 2.196405] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input0
[ 2.196454] hid-generic 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0
[ 2.197445] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.1/input/input1
[ 2.197542] hid-generic 0003:046D:C51A.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1
[ 2.206302] Btrfs loaded
[ 2.277792] usb 3-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.279965] device label LinuxRoot devid 1 transid 20228 /dev/sda3
[ 2.356801] PM: Starting manual resume from disk
[ 2.356803] PM: Hibernation image partition 8:5 present
[ 2.356804] PM: Looking for hibernation image.
[ 2.356967] PM: Image not found (code -22)
[ 2.356971] PM: Hibernation image not present or could not be loaded.
[ 2.358117] device label LinuxRoot devid 1 transid 20228 /dev/disk/by-uuid/80b32376-e4af-4141-a3b9-2ff5998baac2
[ 2.358550] btrfs: disk space caching is enabled
[ 2.393067] usb 3-1.5.1: New USB device found, idVendor=0853, idProduct=0100
[ 2.393072] usb 3-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.393075] usb 3-1.5.1: Product: HHKB Professional
[ 2.393078] usb 3-1.5.1: Manufacturer: Topre Corporation
[ 2.397218] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/input/input2
[ 2.397299] hid-generic 0003:0853:0100.0003: input,hidraw2: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:1a.0-1.5.1/input0
[ 4.378691] udevd[425]: starting version 175
[ 5.162485] wmi: Mapper loaded
[ 5.172620] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20121018/utaddress-251)
[ 5.172625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.269150] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 5.269155] ACPI: Sleep Button [SLPB]
[ 5.269193] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.269195] ACPI: Power Button [PWRF]
[ 5.287078] mei 0000:00:16.0: setting latency timer to 64
[ 5.287124] mei 0000:00:16.0: irq 55 for MSI/MSI-X
[ 5.413088] ACPI: Requesting acpi_cpufreq
[ 5.431729] iTCO_vendor_support: vendor-support=0
[ 5.432183] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.432203] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.432277] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.446297] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[ 5.471130] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 5.511074] [drm] Initialized drm 1.1.0 20060810
[ 5.579507] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.692333] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.692788] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[ 5.693811] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.694283] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
[ 5.695346] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.695812] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
[ 5.696902] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.697374] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x25
[ 5.698400] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.698869] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x25
[ 5.699853] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.700318] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x25
[ 5.701292] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.701757] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x25
[ 5.702796] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
[ 5.703287] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.920624] MXM: GUID detected in BIOS
[ 5.921092] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x084000a2
[ 5.921095] nouveau [ DEVICE][0000:01:00.0] Chipset: G84 (NV84)
[ 5.921096] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 5.922158] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 5.959849] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 5.959851] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 5.959929] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 5.959931] nouveau [ VBIOS][0000:01:00.0] version 60.84.41.00.00
[ 5.979864] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
[ 5.979866] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 5.979868] nouveau [ PFB][0000:01:00.0] ZCOMP: 1892 tags
[ 6.014859] [TTM] Zone kernel: Available graphics memory: 4089824 kiB
[ 6.014871] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.014871] [TTM] Initializing pool allocator
[ 6.014874] [TTM] Initializing DMA pool allocator
[ 6.019020] nouveau [ DRM] VRAM: 256 MiB
[ 6.019022] nouveau [ DRM] GART: 512 MiB
[ 6.019025] nouveau [ DRM] BIT BIOS found
[ 6.019027] nouveau [ DRM] Bios version 60.84.41.00
[ 6.019029] nouveau [ DRM] TMDS table version 2.0
[ 6.019030] nouveau [ DRM] DCB version 4.0
[ 6.019031] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 6.019032] nouveau [ DRM] DCB outp 01: 01000302 00000030
[ 6.019033] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 6.019034] nouveau [ DRM] DCB outp 03: 02011312 00000030
[ 6.019035] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 6.019037] nouveau [ DRM] DCB conn 00: 1030
[ 6.019038] nouveau [ DRM] DCB conn 01: 2130
[ 6.019039] nouveau [ DRM] DCB conn 02: 0210
[ 6.019040] nouveau [ DRM] DCB conn 03: 0211
[ 6.019041] nouveau [ DRM] DCB conn 04: 0213
[ 6.029856] nouveau W[ DRM] skipping unsupported encoder 1/0
[ 6.029857] nouveau W[ DRM] TV-1 has no encoders, removing
[ 6.029871] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.029872] [drm] No driver support for vblank timestamp query.
[ 6.052858] nouveau [ DRM] 1 available performance level(s)
[ 6.052860] nouveau [ DRM] 0: core 675MHz shader 1450MHz memory 1008MHz fanspeed 100%
[ 6.052862] nouveau [ DRM] c: core 675MHz shader 1458MHz memory 1008MHz voltage 1300mV
[ 6.063378] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 6.066778] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 6.070547] nouveau 0000:01:00.0: No connectors reported connected with modes
[ 6.070549] [drm] Cannot find any crtc or sizes - going 1024x768
[ 6.075274] nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff8802136b4c00
[ 6.075368] fbcon: nouveaufb (fb0) is primary device
[ 6.079656] Console: switching to colour frame buffer device 128x48
[ 6.080190] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.080193] nouveau 0000:01:00.0: registered panic notifier
[ 6.080198] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 6.132051] Bluetooth: Core ver 2.16
[ 6.132061] NET: Registered protocol family 31
[ 6.132070] Bluetooth: HCI device and connection manager initialized
[ 6.132075] Bluetooth: HCI socket layer initialized
[ 6.132078] Bluetooth: L2CAP socket layer initialized
[ 6.132082] Bluetooth: SCO socket layer initialized
[ 6.176131] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
[ 6.228188] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.228300] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.228404] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.228469] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.228591] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.228719] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.228828] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.338556] usbcore: registered new interface driver btusb
[ 6.750841] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 7.305427] cfg80211: Calling CRDA to update world regulatory domain
[ 7.464582] usb 4-1.1: reset high-speed USB device number 3 using ehci-pci
[ 7.696415] cfg80211: World regulatory domain updated:
[ 7.696418] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.696421] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.696423] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.696425] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.696427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.696429] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.788576] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.788942] usbcore: registered new interface driver rt2800usb
[ 8.762829] device label LinuxRoot devid 1 transid 20228 /dev/sda3
[ 9.694262] Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k
[ 9.712299] btrfs: disk space caching is enabled
[ 9.816569] btrfs: disk space caching is enabled
[ 9.896877] loop: module loaded
[ 11.160623] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 11.263903] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 11.264048] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.302410] RPC: Registered named UNIX socket transport module.
[ 11.302412] RPC: Registered udp transport module.
[ 11.302413] RPC: Registered tcp transport module.
[ 11.302414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.373695] FS-Cache: Loaded
[ 11.385414] Key type dns_resolver registered
[ 11.430013] FS-Cache: Netfs 'nfs' registered for caching
[ 11.472192] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.781649] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 12.781656] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 12.781695] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.245671] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.245674] Bluetooth: BNEP filters: protocol multicast
[ 14.245681] Bluetooth: BNEP socket layer initialized
[ 14.372068] Bluetooth: RFCOMM TTY layer initialized
[ 14.372077] Bluetooth: RFCOMM socket layer initialized
[ 14.372078] Bluetooth: RFCOMM ver 1.11
[ 14.763728] rt2800usb 4-1.1:1.0: firmware: agent loaded rt2870.bin into memory
[ 15.027155] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.190447] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 16.195658] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 16.205799] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 16.209224] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 16.974081] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 16.977481] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 19.392588] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 19.396072] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
[ 19.530948] nouveau E[ DRM] DDC responded, but no EDID for DVI-I-1
Reply to: