Bug#706499: Ethernet with Realtek R8169 only working with IPV6

[Karsten Malcher <debian@dct.mine.nu>]

Hello Ben,

Am 02.05.2013 01:41, schrieb Ben Hutchings:
> Control: tag -1 moreinfo
>
> Please provide:
> - Kernel boot log (/var/log/dmesg)

Is provided in the first post.
Nothing special can be seen.

Maybe it is possible to activate a debug mode?

When i have enough information i may ask the kernel team.
But my experience is that the first question is "It is working with the actual kernel?"

> - Network configuration files (/etc/network/interfaces and any others)

First i could work with eth0 and installed debian without problems.
After a reboot the problems come up.
Now i use eth1, because eth0 comes not up reliable.

> - If you are using DHCP, the DHCP daemon log messages
>    (grep dhclient /var/log/daemon.log)

It's configuration with static IP's.

> Ben.

Karsten

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface 1000 MB
allow-hotplug eth0
iface eth0 inet static
	address 192.168.1.3
	netmask 255.255.255.0
	network 192.168.1.0
	broadcast 192.168.1.255
	gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
	dns-nameservers 192.168.1.1

# The secondary network interface 100 MB
allow-hotplug eth1
iface eth1 inet static
	address 192.168.1.4
	netmask 255.255.255.0
	network 192.168.1.0
	broadcast 192.168.1.255