Bug#705586: linux-image-3.2.0-4-amd64: ath9k_htc fails to initialize with tl-wn722n; regression vs sqeeze backport
Package: src:linux
Version: 3.2.41-2
Severity: normal
Tags: lfs
Dear Maintainer,
I have a few TL-WN722N usb wireless networking devices that I use on a few
systems running Dabian Sqweeze backports. On testing Weezy the driver
encounters an error and doesn't complete setting up the wlan interface.
I did try compiling and installing a standard kernel bassed on the config
included in Debian, however I encountered issues with the graphics and didn't
test the networking.
In the data below you'll see that the builtin wireless device does startup
correctly, but the usb wireless device, while it is recognised correctly, fails
after inserting firmware.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=73b6745d-4f8c-4a0d-99d9-daf57a03d58c ro quiet
** Not tainted
** Kernel log:
[ 6.246762] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.246767] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.246771] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.246775] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.246779] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.246783] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.363416] Console: switching to colour frame buffer device 170x48
[ 6.375744] fb0: inteldrmfb frame buffer device
[ 6.375748] drm: registered panic notifier
[ 6.399125] ACPI Warning: _BQC returned an invalid level (20110623/video-486)
[ 6.399958] acpi device:43: registered as cooling_device2
[ 6.419734] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 6.419854] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.419893] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.420417] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 6.420427] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.420448] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 6.420575] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.420590] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7e00000
[ 6.420681] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 6.420770] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.420775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.420779] usb usb3: Product: xHCI Host Controller
[ 6.420783] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 6.420787] usb usb3: SerialNumber: 0000:00:14.0
[ 6.423064] xHCI xhci_add_endpoint called for root hub
[ 6.423070] xHCI xhci_check_bandwidth called for root hub
[ 6.423140] hub 3-0:1.0: USB hub found
[ 6.423153] hub 3-0:1.0: 4 ports detected
[ 6.423294] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.423309] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 6.423345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.423350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.423354] usb usb4: Product: xHCI Host Controller
[ 6.423358] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 6.423362] usb usb4: SerialNumber: 0000:00:14.0
[ 6.423816] xHCI xhci_add_endpoint called for root hub
[ 6.423820] xHCI xhci_check_bandwidth called for root hub
[ 6.423882] hub 4-0:1.0: USB hub found
[ 6.423894] hub 4-0:1.0: 4 ports detected
[ 6.439650] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.439677] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.520314] Linux media interface: v0.10
[ 6.546460] Linux video capture interface: v2.00
[ 6.552987] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[ 6.556181] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[ 6.556452] usbcore: registered new interface driver uvcvideo
[ 6.556457] USB Video Class driver (1.1.1)
[ 7.163293] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 7.163449] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.163697] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.041112] Adding 4076540k swap on /dev/sda3. Priority:-1 extents:1 across:4076540k
[ 9.070759] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.390715] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.690382] loop: module loaded
[ 10.330795] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.535254] RPC: Registered named UNIX socket transport module.
[ 11.535259] RPC: Registered udp transport module.
[ 11.535261] RPC: Registered tcp transport module.
[ 11.535264] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.597046] FS-Cache: Loaded
[ 11.658664] FS-Cache: Netfs 'nfs' registered for caching
[ 11.677673] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.026916] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 16.123808] Bluetooth: Core ver 2.16
[ 16.123830] NET: Registered protocol family 31
[ 16.123832] Bluetooth: HCI device and connection manager initialized
[ 16.123835] Bluetooth: HCI socket layer initialized
[ 16.123838] Bluetooth: L2CAP socket layer initialized
[ 16.123844] Bluetooth: SCO socket layer initialized
[ 16.185602] Bluetooth: RFCOMM TTY layer initialized
[ 16.185618] Bluetooth: RFCOMM socket layer initialized
[ 16.185620] Bluetooth: RFCOMM ver 1.11
[ 16.595340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.595344] Bluetooth: BNEP filters: protocol multicast
[ 17.909938] rt2800pci 0000:02:00.0: firmware: agent loaded rt2860.bin into memory
[ 17.966298] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.062065] r8169 0000:03:00.2: eth0: link down
[ 18.062704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.497412] lp: driver loaded but no devices found
[ 18.606872] ppdev: user-space parallel port driver
[ 20.704239] wlan0: authenticate with f8:d1:11:5e:a3:6c (try 1)
[ 20.707404] wlan0: authenticated
[ 20.724484] wlan0: associate with f8:d1:11:5e:a3:6c (try 1)
[ 20.729722] wlan0: RX AssocResp from f8:d1:11:5e:a3:6c (capab=0x411 status=0 aid=1)
[ 20.729726] wlan0: associated
[ 20.737219] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.290526] wlan0: no IPv6 routers present
[ 387.875613] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 387.900360] usb 3-1: New USB device found, idVendor=0cf3, idProduct=9271
[ 387.900370] usb 3-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 387.900377] usb 3-1: Product: USB2.0 WLAN
[ 387.900381] usb 3-1: Manufacturer: ATHEROS
[ 387.900385] usb 3-1: SerialNumber: 12345
[ 388.016187] usb 3-1: firmware: agent loaded htc_9271.fw into memory
[ 388.299820] usb 3-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 388.300155] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
[ 388.303268] usb 3-1: ath9k_htc: Unable to allocate URBs
[ 388.303312] ath9k_htc: probe of 3-1:1.0 failed with error -22
[ 388.303380] usbcore: registered new interface driver ath9k_htc
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: X401A1
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: X401A1.204
board_vendor: ASUSTeK COMPUTER INC.
board_name: X401A1
board_version: 1.0
** Loaded modules:
ath9k_htc
ath9k_common
ath9k_hw
ath
aes_x86_64
aes_generic
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
nls_utf8
nls_cp437
vfat
fat
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
uvcvideo
videodev
v4l2_compat_ioctl32
media
arc4
rt2800pci
rt2800lib
rt2x00pci
snd_hda_intel
rt2x00lib
snd_hda_codec
asus_nb_wmi
asus_wmi
eeprom_93cx6
mac80211
cfg80211
snd_hwdep
snd_pcm
snd_page_alloc
sparse_keymap
joydev
snd_seq
rfkill
crc_ccitt
snd_seq_device
r8169
mii
xhci_hcd
i915
ehci_hcd
coretemp
usbcore
drm_kms_helper
drm
i2c_algo_bit
psmouse
i2c_i801
serio_raw
i2c_core
pcspkr
evdev
acpi_cpufreq
snd_timer
snd
iTCO_wdt
iTCO_vendor_support
battery
ac
usb_common
power_supply
video
mperf
efivars
soundcore
crc32c_intel
ghash_clmulni_intel
cryptd
processor
button
wmi
ext4
crc16
jbd2
mbcache
sd_mod
crc_t10dif
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 10:bf:48:6a:cb:58 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 08:ed:b9:6b:81:ae brd ff:ff:ff:ff:ff:ff
inet 192.168.1.11/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::aed:b9ff:fe6b:81ae/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1344 20 0 0 0 0 0 0 1344 20 0 0 0 0 0 0
wlan0: 1441075 1480 0 0 0 0 0 0 97097 858 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1175 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
1174 incoming packets delivered
764 requests sent out
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 8
OutType3: 8
Tcp:
18 active connections openings
0 passive connection openings
2 failed connection attempts
0 connection resets received
0 connections established
1023 segments received
632 segments send out
4 segments retransmited
0 bad segments received.
2 resets sent
Udp:
58 packets received
8 packets to unknown port received.
0 packet receive errors
91 packets sent
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
17 delayed acks sent
Quick ack mode was activated 2 times
878 packet headers predicted
39 acknowledgments not containing data payload received
1 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
1 fast retransmits
1 forward retransmits
2 other TCP timeouts
2 DSACKs sent for old packets
TCPSackShiftFallback: 2
IpExt:
InMcastPkts: 87
OutMcastPkts: 60
InBcastPkts: 21
OutBcastPkts: 21
InOctets: 1407869
OutOctets: 58212
InMcastOctets: 6361
OutMcastOctets: 5513
InBcastOctets: 984
OutBcastOctets: 984
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation 7 Series Chipset Family LPC Controller [8086:1e5e] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe [1814:5390]
Subsystem: Foxconn International, Inc. Device [105b:e054]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device [1043:14f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 058f:a014 Alcor Micro Corp. Asus Integrated Webcam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.36+wheezy.1
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: