Bug#577925: Please apply attached patch ASAP
Hi,
Please find attached to this mail, a working init script (thanks to
jcristau for sharing what he hacked). Also, please consider fixing this
bug in Wheezy (for example, through wheezy-proposed-updates).
If I don't hear from you, I will ask the release team if this patch may
be considered for an NMU (probably, after the release, through
proposed-updates).
Cheers,
Thomas
diff -Nru tgt-1.0.17/debian/changelog tgt-1.0.17/debian/changelog
--- tgt-1.0.17/debian/changelog 2011-06-21 17:48:54.000000000 +0800
+++ tgt-1.0.17/debian/changelog 2013-04-11 23:25:22.000000000 +0800
@@ -1,3 +1,10 @@
+tgt (1:1.0.17-1.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Adds an init script.
+
+ -- Thomas Goirand <zigo@debian.org> Thu, 11 Apr 2013 23:25:08 +0800
+
tgt (1:1.0.17-1) unstable; urgency=low
* New upstream release.
diff -Nru tgt-1.0.17/debian/init.d tgt-1.0.17/debian/init.d
--- tgt-1.0.17/debian/init.d 1970-01-01 08:00:00.000000000 +0800
+++ tgt-1.0.17/debian/init.d 2013-04-11 23:26:43.000000000 +0800
@@ -0,0 +1,158 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides: tgtd
+# Required-Start: $remote_fs $syslog
+# Required-Stop: $remote_fs $syslog
+# Should-Start: zfs
+# Should-Stop: zfs
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: iscsi target daemon
+# Description: iscsi target daemon
+### END INIT INFO
+
+# This is an example init.d script for stopping/starting/reconfiguring tgtd.
+
+TGTD_CONFIG=/etc/tgt/targets.conf
+
+TASK=$1
+
+start()
+{
+ echo "Starting target framework daemon"
+ # Start tgtd first.
+ tgtd &>/dev/null
+ RETVAL=$?
+ if [ "$RETVAL" -ne 0 ] ; then
+ echo "Could not start tgtd (is tgtd already running?)"
+ exit 1
+ fi
+ # Put tgtd into "offline" state until all the targets are configured.
+ # We don't want initiators to (re)connect and fail the connection
+ # if it's not ready.
+ tgtadm --op update --mode sys --name State -v offline
+ # Configure the targets.
+ tgt-admin -e -c $TGTD_CONFIG
+ # Put tgtd into "ready" state.
+ tgtadm --op update --mode sys --name State -v ready
+}
+
+stop()
+{
+ if [ "$RUNLEVEL" == 0 -o "$RUNLEVEL" == 6 ] ; then
+ forcedstop
+ fi
+ echo "Stopping target framework daemon"
+ # Remove all targets. It only removes targets which are not in use.
+ tgt-admin --update ALL -c /dev/null &>/dev/null
+ # tgtd will exit if all targets were removed
+ tgtadm --op delete --mode system &>/dev/null
+ RETVAL=$?
+ if [ "$RETVAL" -eq 107 ] ; then
+ echo "tgtd is not running"
+ [ "$TASK" != "restart" ] && exit 1
+ elif [ "$RETVAL" -ne 0 ] ; then
+ echo "Some initiators are still connected - could not stop tgtd"
+ exit 2
+ fi
+ echo -n
+}
+
+forcedstop()
+{
+ # NOTE: Forced shutdown of the iscsi target may cause data corruption
+ # for initiators that are connected.
+ echo "Force-stopping target framework daemon"
+ # Offline everything first. May be needed if we're rebooting, but
+ # expect the initiators to reconnect cleanly when we boot again
+ # (i.e. we don't want them to reconnect to a tgtd which is still
+ # working, but the target is gone).
+ tgtadm --op update --mode sys --name State -v offline &>/dev/null
+ RETVAL=$?
+ if [ "$RETVAL" -eq 107 ] ; then
+ echo "tgtd is not running"
+ [ "$TASK" != "restart" ] && exit 1
+ else
+ tgt-admin --offline ALL
+ # Remove all targets, even if they are still in use.
+ tgt-admin --update ALL -c /dev/null -f
+ # It will shut down tgtd only after all targets were removed.
+ tgtadm --op delete --mode system
+ RETVAL=$?
+ if [ "$RETVAL" -ne 0 ] ; then
+ echo "Failed to shutdown tgtd"
+ exit 1
+ fi
+ fi
+ echo -n
+}
+
+reload()
+{
+ echo "Updating target framework daemon configuration"
+ # Update configuration for targets. Only targets which
+ # are not in use will be updated.
+ tgt-admin --update ALL -c $TGTD_CONFIG &>/dev/null
+ RETVAL=$?
+ if [ "$RETVAL" -eq 107 ] ; then
+ echo "tgtd is not running"
+ exit 1
+ fi
+}
+
+forcedreload()
+{
+ echo "Force-updating target framework daemon configuration"
+ # Update configuration for targets, even those in use.
+ tgt-admin --update ALL -f -c $TGTD_CONFIG &>/dev/null
+ RETVAL=$?
+ if [ "$RETVAL" -eq 107 ] ; then
+ echo "tgtd is not running"
+ exit 1
+ fi
+}
+
+status()
+{
+ # Don't name this script "tgtd"...
+ TGTD_PROC=$(ps -C tgtd | grep -c tgtd)
+ if [ "$TGTD_PROC" -eq 2 ] ; then
+ echo "tgtd is running. Run 'tgt-admin -s' to see detailed target info."
+ else
+ echo "tgtd is NOT running."
+ fi
+}
+
+case $1 in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ forcedstop)
+ forcedstop
+ ;;
+ restart)
+ TASK=restart
+ stop && start
+ ;;
+ forcedrestart)
+ TASK=restart
+ forcedstop && start
+ ;;
+ reload)
+ reload
+ ;;
+ forcedreload)
+ forcedreload
+ ;;
+ status)
+ status
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|forcedstop|restart|forcedrestart|reload|forcedreload|status}"
+ exit 2
+ ;;
+esac
+
Reply to: