Bug#693083: System freezes with graphics going down [black screen].
It seems I'm facing similar problem.
My PC hangs when on linux-image-3.2.0-4-686-pae. I've first
noticed it with version 3.2.39-2, then updated to 3.2.41-1 and then
to current 3.2.41-2 -- the problem exists with all these versions.
The system hangs after 1 to 3 hours of working (or even staying idle),
all of a sudden. Even if I leave it idle at logon screen it hangs
over time.
When it hangs the screen becomes covered with noizy artefacts, and
there is also fizzle noise in headphones.
However, if it hangs while the screen is off (powersave mode) it shows
"no signal".
I don't use any hibernate functionality, my setup is quite default one.
Hung system doesn't respond to keyboard taps (capslock, numlock
doesn't highlight) and the soft-power button gives no reaction.
I'm back on linux-image-3.2.0-3-686-pae (ver 3.2.23-1) for a while,
and everything is OK with this one.
Some info:
Intel Core i3-2125 CPU, integrated Intel graphics, driver=i915.
Detailed lshw and dmesg outputs are attached.
libdrm-intel1:i386 2.4.40-1~deb7u2 i386
xserver-xorg-video-intel 2:2.19.0-6 i386
I've also looked through the logs in /var/logs - no sign of clue,
unfortunately.
I've had some experience using make-kpkg, so I would probably manage to
package a custom kernel. I'm going to try different kernel versions
when have some spare time.
I'm ready to carry out any tests, if you guide me on this.
Hope it will be of help.
--
Andrey Smachev
description: Desktop Computer
product: System Product Name (To be filled by O.E.M.)
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=2005910B-CB5B-D911-B702-14DAE9DFB57A
*-core
description: Motherboard
product: P8H67-M
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MT7018032300846
slot: To be filled by O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0704
date: 08/12/2011
size: 64KiB
capacity: 4032KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification
*-cpu:0
description: CPU
product: Intel(R) Core(TM) i3-2125 CPU @ 3.30GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.10.7
serial: 0002-06A7-0000-0000-0000-0000
slot: LGA1155
size: 1600MHz
capacity: 3800MHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
configuration: cores=2 enabledcores=1 id=0 threads=2
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 128KiB
capabilities: internal write-back unified
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KiB
capacity: 512KiB
capabilities: internal varies unified
*-cache:2 DISABLED
description: L3 cache
physical id: 7
slot: L3-Cache
size: 3MiB
capacity: 3MiB
capabilities: internal unified
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 64 bits
capabilities: logical
*-logicalcpu:2
description: Logical CPU
physical id: 0.3
width: 64 bits
capabilities: logical
*-logicalcpu:3
description: Logical CPU
physical id: 0.4
width: 64 bits
capabilities: logical
*-logicalcpu:4
description: Logical CPU
physical id: 0.5
width: 64 bits
capabilities: logical
*-logicalcpu:5
description: Logical CPU
physical id: 0.6
width: 64 bits
capabilities: logical
*-logicalcpu:6
description: Logical CPU
physical id: 0.7
width: 64 bits
capabilities: logical
*-logicalcpu:7
description: Logical CPU
physical id: 0.8
width: 64 bits
capabilities: logical
*-logicalcpu:8
description: Logical CPU
physical id: 0.9
width: 64 bits
capabilities: logical
*-logicalcpu:9
description: Logical CPU
physical id: 0.a
width: 64 bits
capabilities: logical
*-logicalcpu:10
description: Logical CPU
physical id: 0.b
width: 64 bits
capabilities: logical
*-logicalcpu:11
description: Logical CPU
physical id: 0.c
width: 64 bits
capabilities: logical
*-logicalcpu:12
description: Logical CPU
physical id: 0.d
width: 64 bits
capabilities: logical
*-logicalcpu:13
description: Logical CPU
physical id: 0.e
width: 64 bits
capabilities: logical
*-logicalcpu:14
description: Logical CPU
physical id: 0.f
width: 64 bits
capabilities: logical
*-logicalcpu:15
description: Logical CPU
physical id: 0.10
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 27
slot: System board or motherboard
size: 4GiB
*-bank:0
description: DIMM DDR3 Synchronous 1333 MHz (0,8 ns)
product: VS2GB1333D4
vendor: Corsair
physical id: 0
serial: 0000010
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:1
description: DIMM Synchronous [empty]
product: Array1_PartNumber1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
width: 64 bits
*-bank:2
description: DIMM DDR3 Synchronous 1333 MHz (0,8 ns)
product: VS2GB1333D4
vendor: Corsair
physical id: 2
serial: 0000010
slot: DIMM2
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:3
description: DIMM Synchronous [empty]
product: Array1_PartNumber3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
width: 64 bits
*-cpu:1
physical id: 1
bus info: cpu@1
version: 6.10.7
serial: 0002-06A7-0000-0000-0000-0000
size: 1600MHz
capacity: 1600MHz
capabilities: vmx ht cpufreq
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
capabilities: logical
*-logicalcpu:2
description: Logical CPU
physical id: 0.3
capabilities: logical
*-logicalcpu:3
description: Logical CPU
physical id: 0.4
capabilities: logical
*-logicalcpu:4
description: Logical CPU
physical id: 0.5
capabilities: logical
*-logicalcpu:5
description: Logical CPU
physical id: 0.6
capabilities: logical
*-logicalcpu:6
description: Logical CPU
physical id: 0.7
capabilities: logical
*-logicalcpu:7
description: Logical CPU
physical id: 0.8
capabilities: logical
*-logicalcpu:8
description: Logical CPU
physical id: 0.9
capabilities: logical
*-logicalcpu:9
description: Logical CPU
physical id: 0.a
capabilities: logical
*-logicalcpu:10
description: Logical CPU
physical id: 0.b
capabilities: logical
*-logicalcpu:11
description: Logical CPU
physical id: 0.c
capabilities: logical
*-logicalcpu:12
description: Logical CPU
physical id: 0.d
capabilities: logical
*-logicalcpu:13
description: Logical CPU
physical id: 0.e
capabilities: logical
*-logicalcpu:14
description: Logical CPU
physical id: 0.f
capabilities: logical
*-logicalcpu:15
description: Logical CPU
physical id: 0.10
capabilities: logical
*-pci
description: Host bridge
product: 2nd Generation Core Processor Family DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 09
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0
*-pci:0
description: PCI bridge
product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 09
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40
*-display
description: VGA compatible controller
product: 2nd Generation Core Processor Family Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:46 memory:fe000000-fe3fffff memory:c0000000-cfffffff ioport:f000(size=64)
*-communication UNCLAIMED
description: Communication controller
product: 6 Series/C200 Series Chipset Family MEI Controller #1
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: latency=0
resources: memory:fe507000-fe50700f
*-usb:0
description: USB controller
product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:23 memory:fe506000-fe5063ff
*-multimedia
description: Audio device
product: 6 Series/C200 Series Chipset Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 05
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:47 memory:fe500000-fe503fff
*-pci:1
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41
*-pci:2
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:42 ioport:e000(size=4096) memory:fe400000-fe4fffff
*-ide
description: IDE interface
product: VT6415 PATA IDE Host Controller
vendor: VIA Technologies, Inc.
physical id: 0
bus info: pci@0000:03:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: ide pm msi pciexpress bus_master cap_list rom
configuration: driver=pata_via latency=0
resources: irq:16 ioport:e040(size=8) ioport:e030(size=4) ioport:e020(size=8) ioport:e010(size=4) ioport:e000(size=16) memory:fe400000-fe40ffff
*-pci:3
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:43
*-pci:4
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 7
vendor: Intel Corporation
physical id: 1c.6
bus info: pci@0000:00:1c.6
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:44 ioport:d000(size=4096) ioport:d0000000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 06
serial: 00:80:48:20:e0:d3
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:45 ioport:d000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff
*-pci:5
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1c.7
bus info: pci@0000:00:1c.7
version: b5
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm subtractive_decode bus_master cap_list
*-pci
description: PCI bridge
product: ASM1083/1085 PCIe to PCI Bridge
vendor: ASMedia Technology Inc.
physical id: 0
bus info: pci@0000:06:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-usb:1
description: USB controller
product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:23 memory:fe505000-fe5053ff
*-isa
description: ISA bridge
product: H67 Express Chipset Family LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency=0
*-ide:0
description: IDE interface
product: 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi3
version: 05
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=ata_piix latency=0
resources: irq:20 ioport:f110(size=8) ioport:f100(size=4) ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=16) ioport:f0c0(size=16)
*-disk
description: ATA Disk
product: WDC WD5000AAKX-0
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sda
version: 15.0
serial: WD-WMAYU6427326
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=000cb499
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: 37bda543-cdcb-4028-969c-ffcb9bf332cb
size: 27GiB
capacity: 27GiB
capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized
configuration: created=2012-01-15 02:40:20 filesystem=ext3 label=root modified=2013-02-17 17:46:17 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered mounted=2013-03-23 07:53:57 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@3:0.0.0,2
logical name: /dev/sda2
size: 437GiB
capacity: 437GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 1906MiB
capabilities: nofs
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /home
capacity: 435GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,barrier=1,data=ordered state=mounted
*-serial
description: SMBus
product: 6 Series/C200 Series Chipset Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 05
width: 64 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: irq:18 memory:fe504000-fe5040ff ioport:f040(size=32)
*-ide:1
description: IDE interface
product: 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 05
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:20 ioport:f0b0(size=8) ioport:f0a0(size=4) ioport:f090(size=8) ioport:f080(size=4) ioport:f070(size=16) ioport:f060(size=16)
*-scsi
physical id: 2
bus info: usb@2:1.8
logical name: scsi6
capabilities: emulated
*-disk
description: SCSI Disk
product: STORAGE DEVICE
vendor: Generic
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdb
version: 9451
capabilities: removable
configuration: sectorsize=512
*-medium
physical id: 0
logical name: /dev/sdb
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000bad2f000 (usable)
[ 0.000000] BIOS-e820: 00000000bad2f000 - 00000000bad87000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bad87000 - 00000000bada7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bada7000 - 00000000badb8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badb8000 - 00000000badcc000 (reserved)
[ 0.000000] BIOS-e820: 00000000badcc000 - 00000000badce000 (usable)
[ 0.000000] BIOS-e820: 00000000badce000 - 00000000badcf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badcf000 - 00000000badd7000 (reserved)
[ 0.000000] BIOS-e820: 00000000badd7000 - 00000000bade1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bade1000 - 00000000bae3d000 (reserved)
[ 0.000000] BIOS-e820: 00000000bae3d000 - 00000000bae80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae80000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H67-M, BIOS 0704 08/12/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x13fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 13FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00fccc0] fccc0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36cba000 - 37655000
[ 0.000000] ACPI: RSDP 000f0420 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT bad79068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP bad82f38 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT bad79140 09DF1 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS badd8f80 00040
[ 0.000000] ACPI: APIC bad83030 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT bad830a8 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG bad831b0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET bad831f0 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4228MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0013fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000bad2f
[ 0.000000] 0: 0x000badcc -> 0x000badce
[ 0.000000] 0: 0x000bae80 -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0013fe00
[ 0.000000] On node 0 totalpages: 1026111
[ 0.000000] free_area_init_node: node 0, pgdat c140d680, node_mem_map f44ba200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221482 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8457 pages used for memmap
[ 0.000000] HighMem zone: 790442 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b2000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1015874
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=37bda543-cdcb-4028-969c-ffcb9bf332cb ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:0013fe00)
[ 0.000000] Memory: 4047340k/5240832k available (2836k kernel code, 57104k reserved, 1343k data, 412k init, 3195596k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1415000 - 0xc147c000 ( 412 kB)
[ 0.000000] .data : 0xc12c51ec - 0xc1414f40 (1343 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c51ec (2836 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3311.644 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.28 BogoMIPS (lpj=13246576)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000020] Security Framework initialized
[ 0.000023] AppArmor: AppArmor disabled by boot time parameter
[ 0.000031] Mount-cache hash table entries: 512
[ 0.000093] Initializing cgroup subsys cpuacct
[ 0.000096] Initializing cgroup subsys memory
[ 0.000101] Initializing cgroup subsys devices
[ 0.000102] Initializing cgroup subsys freezer
[ 0.000103] Initializing cgroup subsys net_cls
[ 0.000104] Initializing cgroup subsys blkio
[ 0.000107] Initializing cgroup subsys perf_event
[ 0.000125] CPU: Physical Processor ID: 0
[ 0.000126] CPU: Processor Core ID: 0
[ 0.000129] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000130] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000132] mce: CPU supports 7 MCE banks
[ 0.000140] CPU0: Thermal monitoring enabled (TM1)
[ 0.000144] using mwait in idle threads.
[ 0.000461] ACPI: Core revision 20110623
[ 0.002829] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.003227] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.042883] CPU0: Intel(R) Core(TM) i3-2125 CPU @ 3.30GHz stepping 07
[ 0.148258] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.148262] PEBS disabled due to CPU errata.
[ 0.148264] ... version: 3
[ 0.148265] ... bit width: 48
[ 0.148265] ... generic registers: 4
[ 0.148267] ... value mask: 0000ffffffffffff
[ 0.148268] ... max period: 000000007fffffff
[ 0.148269] ... fixed-purpose events: 3
[ 0.148269] ... event mask: 000000070000000f
[ 0.148346] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148400] CPU 1 irqstacks, hard=f40d4000 soft=f40d6000
[ 0.148401] Booting Node 0, Processors #1
[ 0.148403] smpboot cpu 1: start_ip = 9a000
[ 0.158586] Initializing CPU#1
[ 0.256259] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.256319] CPU 2 irqstacks, hard=f4104000 soft=f4106000
[ 0.256320] #2
[ 0.256321] smpboot cpu 2: start_ip = 9a000
[ 0.266523] Initializing CPU#2
[ 0.364148] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.364212] CPU 3 irqstacks, hard=f4116000 soft=f4118000
[ 0.364213] #3 Ok.
[ 0.364214] smpboot cpu 3: start_ip = 9a000
[ 0.374395] Initializing CPU#3
[ 0.472066] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.472085] Brought up 4 CPUs
[ 0.472086] Total of 4 processors activated (26489.93 BogoMIPS).
[ 0.474731] devtmpfs: initialized
[ 0.474829] PM: Registering ACPI NVS region at bad2f000 (360448 bytes)
[ 0.474836] PM: Registering ACPI NVS region at bada7000 (69632 bytes)
[ 0.474838] PM: Registering ACPI NVS region at badce000 (4096 bytes)
[ 0.474840] PM: Registering ACPI NVS region at badd7000 (40960 bytes)
[ 0.474842] PM: Registering ACPI NVS region at bae3d000 (274432 bytes)
[ 0.474941] print_constraints: dummy:
[ 0.474973] NET: Registered protocol family 16
[ 0.475027] ACPI: bus type pci registered
[ 0.475069] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.475071] PCI: not using MMCONFIG
[ 0.487472] PCI: Using configuration type 1 for base access
[ 0.487867] bio: create slab <bio-0> at 0
[ 0.487916] ACPI: Added _OSI(Module Device)
[ 0.487917] ACPI: Added _OSI(Processor Device)
[ 0.487919] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.487920] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.488675] ACPI: EC: Look up EC in DSDT
[ 0.489537] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.491469] ACPI: SSDT badd7c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.491687] ACPI: Dynamic OEM Table Load:
[ 0.491689] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.491705] ACPI: SSDT badd8e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.491881] ACPI: Dynamic OEM Table Load:
[ 0.491882] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.492255] ACPI: Interpreter enabled
[ 0.492263] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.492277] ACPI: Using IOAPIC for interrupt routing
[ 0.492292] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.492331] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.492332] PCI: Using MMCONFIG for extended config space
[ 0.492493] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.496325] ACPI: No dock devices found.
[ 0.496326] HEST: Table not found.
[ 0.496329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.496457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.496599] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.496601] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.496602] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.496604] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.496605] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[ 0.496608] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd7ff])
[ 0.496615] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.496643] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.496666] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.496668] pci 0000:00:01.0: PME# disabled
[ 0.496682] pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
[ 0.496689] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.496694] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.496697] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.496742] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.496763] pci 0000:00:16.0: reg 10: [mem 0xfe507000-0xfe50700f 64bit]
[ 0.496833] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.496837] pci 0000:00:16.0: PME# disabled
[ 0.496866] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.496886] pci 0000:00:1a.0: reg 10: [mem 0xfe506000-0xfe5063ff]
[ 0.496969] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.496973] pci 0000:00:1a.0: PME# disabled
[ 0.496995] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.497009] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.497071] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.497074] pci 0000:00:1b.0: PME# disabled
[ 0.497094] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.497168] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.497171] pci 0000:00:1c.0: PME# disabled
[ 0.497196] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.497270] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.497274] pci 0000:00:1c.4: PME# disabled
[ 0.497295] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.497369] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.497373] pci 0000:00:1c.5: PME# disabled
[ 0.497395] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[ 0.497469] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.497472] pci 0000:00:1c.6: PME# disabled
[ 0.497493] pci 0000:00:1c.7: [8086:244e] type 1 class 0x000604
[ 0.497567] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.497571] pci 0000:00:1c.7: PME# disabled
[ 0.497597] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.497616] pci 0000:00:1d.0: reg 10: [mem 0xfe505000-0xfe5053ff]
[ 0.497700] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.497704] pci 0000:00:1d.0: PME# disabled
[ 0.497725] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[ 0.497840] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[ 0.497853] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 0.497860] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 0.497867] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 0.497874] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 0.497881] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 0.497889] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 0.497931] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.497944] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit]
[ 0.497964] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.497994] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[ 0.498008] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 0.498015] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 0.498022] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 0.498029] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 0.498036] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 0.498043] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 0.498096] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.498139] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.498210] pci 0000:03:00.0: [1106:0415] type 0 class 0x000101
[ 0.498229] pci 0000:03:00.0: reg 10: [io 0xe040-0xe047]
[ 0.498243] pci 0000:03:00.0: reg 14: [io 0xe030-0xe033]
[ 0.498257] pci 0000:03:00.0: reg 18: [io 0xe020-0xe027]
[ 0.498271] pci 0000:03:00.0: reg 1c: [io 0xe010-0xe013]
[ 0.498285] pci 0000:03:00.0: reg 20: [io 0xe000-0xe00f]
[ 0.498311] pci 0000:03:00.0: reg 30: [mem 0xfe400000-0xfe40ffff pref]
[ 0.498378] pci 0000:03:00.0: supports D1 D2
[ 0.498379] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.498384] pci 0000:03:00.0: PME# disabled
[ 0.503976] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.503983] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.503989] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.504059] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.504130] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.504150] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.504182] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.504203] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.504292] pci 0000:05:00.0: supports D1 D2
[ 0.504293] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.504298] pci 0000:05:00.0: PME# disabled
[ 0.511971] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.511977] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.511990] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.512068] pci 0000:06:00.0: [1b21:1080] type 1 class 0x000604
[ 0.512187] pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.512196] pci 0000:00:1c.7: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.512198] pci 0000:00:1c.7: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.512200] pci 0000:00:1c.7: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.512201] pci 0000:00:1c.7: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.512313] pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.512334] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.512336] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.512337] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.512339] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.512340] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.512342] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.512343] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.512345] pci 0000:06:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.512379] pci_bus 0000:00: on NUMA node 0
[ 0.512381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.512473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.512497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.512523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.512548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.512570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.512595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
[ 0.512675] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.512816] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.515748] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.515778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.515807] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.515835] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.515863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.515891] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.515919] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.515950] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.516014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.516019] vgaarb: loaded
[ 0.516020] vgaarb: bridge control possible 0000:00:02.0
[ 0.516039] PCI: Using ACPI for IRQ routing
[ 0.517642] PCI: pci_cache_line_size set to 64 bytes
[ 0.517713] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.517715] reserve RAM buffer: 00000000bad2f000 - 00000000bbffffff
[ 0.517718] reserve RAM buffer: 00000000badce000 - 00000000bbffffff
[ 0.517721] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.517723] reserve RAM buffer: 000000013fe00000 - 000000013fffffff
[ 0.517789] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.517793] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.519803] Switching to clocksource hpet
[ 0.520780] pnp: PnP ACPI init
[ 0.520788] ACPI: bus type pnp registered
[ 0.520869] pnp 00:00: [bus 00-ff]
[ 0.520870] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.520872] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.520873] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.520874] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.520876] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.520877] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[ 0.520878] pnp 00:00: [mem 0x00000000 window]
[ 0.520905] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.520941] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.520942] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.520943] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.520944] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.520946] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.520970] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.520971] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.520973] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.520975] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.520976] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.520978] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.521017] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.521018] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.521019] pnp 00:02: [io 0x0290-0x029f]
[ 0.521021] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.521043] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.521045] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.521266] pnp 00:03: [io 0x0378-0x037f]
[ 0.521272] pnp 00:03: [irq 5]
[ 0.521273] pnp 00:03: [dma 0 disabled]
[ 0.521357] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.521364] pnp 00:04: [dma 4]
[ 0.521365] pnp 00:04: [io 0x0000-0x000f]
[ 0.521366] pnp 00:04: [io 0x0081-0x0083]
[ 0.521367] pnp 00:04: [io 0x0087]
[ 0.521368] pnp 00:04: [io 0x0089-0x008b]
[ 0.521369] pnp 00:04: [io 0x008f]
[ 0.521370] pnp 00:04: [io 0x00c0-0x00df]
[ 0.521383] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.521389] pnp 00:05: [io 0x0070-0x0071]
[ 0.521393] pnp 00:05: [irq 8]
[ 0.521407] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.521411] pnp 00:06: [io 0x0061]
[ 0.521425] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.521434] pnp 00:07: [io 0x0010-0x001f]
[ 0.521435] pnp 00:07: [io 0x0022-0x003f]
[ 0.521436] pnp 00:07: [io 0x0044-0x005f]
[ 0.521437] pnp 00:07: [io 0x0063]
[ 0.521438] pnp 00:07: [io 0x0065]
[ 0.521439] pnp 00:07: [io 0x0067-0x006f]
[ 0.521440] pnp 00:07: [io 0x0072-0x007f]
[ 0.521441] pnp 00:07: [io 0x0080]
[ 0.521442] pnp 00:07: [io 0x0084-0x0086]
[ 0.521443] pnp 00:07: [io 0x0088]
[ 0.521444] pnp 00:07: [io 0x008c-0x008e]
[ 0.521445] pnp 00:07: [io 0x0090-0x009f]
[ 0.521446] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.521447] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.521448] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.521476] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.521478] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.521482] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.521486] pnp 00:08: [irq 13]
[ 0.521500] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.521663] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.521667] pnp 00:09: [irq 4]
[ 0.521668] pnp 00:09: [dma 0 disabled]
[ 0.521704] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.521717] pnp 00:0a: [io 0x0060]
[ 0.521718] pnp 00:0a: [io 0x0064]
[ 0.521721] pnp 00:0a: [irq 1]
[ 0.521740] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.521844] pnp 00:0b: [io 0x0400-0x0453]
[ 0.521845] pnp 00:0b: [io 0x0458-0x047f]
[ 0.521846] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.521847] pnp 00:0b: [io 0x0500-0x057f]
[ 0.521849] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.521850] pnp 00:0b: [mem 0xfec00000-0xfecfffff]
[ 0.521851] pnp 00:0b: [mem 0xfed08000-0xfed08fff]
[ 0.521852] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.521878] system 00:0b: [io 0x0400-0x0453] has been reserved
[ 0.521879] system 00:0b: [io 0x0458-0x047f] has been reserved
[ 0.521881] system 00:0b: [io 0x0500-0x057f] has been reserved
[ 0.521883] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.521884] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.521886] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.521888] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.521889] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.521912] pnp 00:0c: [io 0x0454-0x0457]
[ 0.521935] system 00:0c: [io 0x0454-0x0457] has been reserved
[ 0.521937] system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.522029] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.522051] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.522149] pnp: PnP ACPI: found 14 devices
[ 0.522150] ACPI: ACPI bus type pnp unregistered
[ 0.522152] PnPBIOS: Disabled by ACPI PNP
[ 0.558428] PCI: max bus depth: 2 pci_try_num: 3
[ 0.558478] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.558483] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.558493] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.558496] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.558501] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.558508] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.558518] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.558521] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.558528] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.558534] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 0.558553] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
[ 0.558569] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.558571] pci 0000:00:01.0: setting latency timer to 64
[ 0.558578] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.558582] pci 0000:00:1c.0: setting latency timer to 64
[ 0.558587] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.558591] pci 0000:00:1c.4: setting latency timer to 64
[ 0.558596] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.558599] pci 0000:00:1c.5: setting latency timer to 64
[ 0.558607] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.558611] pci 0000:00:1c.6: setting latency timer to 64
[ 0.558617] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.558621] pci 0000:00:1c.7: setting latency timer to 64
[ 0.558627] pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.558632] pci 0000:06:00.0: setting latency timer to 64
[ 0.558636] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.558638] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.558639] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.558641] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.558642] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.558643] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.558645] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.558646] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.558647] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.558649] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.558650] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.558651] pci_bus 0000:06: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.558653] pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
[ 0.558654] pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
[ 0.558655] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.558656] pci_bus 0000:07: resource 11 [mem 0xbfa00000-0xffffffff]
[ 0.558701] NET: Registered protocol family 2
[ 0.558738] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.558847] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.559002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.559072] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.559074] TCP reno registered
[ 0.559076] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.559080] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.559132] NET: Registered protocol family 1
[ 0.559141] pci 0000:00:02.0: Boot video device
[ 0.559145] pci 0000:00:1a.0: broken D3 during system sleep on ASUS
[ 0.559158] pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.687673] pci 0000:00:1a.0: PCI INT A disabled
[ 0.687695] pci 0000:00:1d.0: broken D3 during system sleep on ASUS
[ 0.687709] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.815562] pci 0000:00:1d.0: PCI INT A disabled
[ 0.815589] PCI: CLS 64 bytes, default 64
[ 0.815632] Unpacking initramfs...
[ 0.994537] Freeing initrd memory: 9836k freed
[ 0.995776] audit: initializing netlink socket (disabled)
[ 0.995786] type=2000 audit(1364450609.840:1): initialized
[ 1.008005] highmem bounce pool size: 64 pages
[ 1.008009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.012293] VFS: Disk quotas dquot_6.5.2
[ 1.012316] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.012365] msgmni has been set to 1682
[ 1.012477] alg: No test for stdrng (krng)
[ 1.012502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.012504] io scheduler noop registered
[ 1.012505] io scheduler deadline registered
[ 1.012517] io scheduler cfq registered (default)
[ 1.012570] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.012588] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.012631] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.012668] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.012725] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.012762] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 1.012818] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.012855] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 1.012911] pcieport 0000:00:1c.6: setting latency timer to 64
[ 1.012948] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[ 1.013015] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.013017] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.013032] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.013035] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.013049] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.013051] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.013055] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.013069] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.013072] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 1.013086] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 1.013087] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.013091] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 1.013100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.013115] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.013116] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.013332] intel_idle: MWAIT substates: 0x1120
[ 1.013333] intel_idle: v0.4 model 0x2A
[ 1.013334] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.013354] ERST: Table is not found!
[ 1.013355] GHES: HEST is not enabled!
[ 1.013363] isapnp: Scanning for PnP cards...
[ 1.368260] isapnp: No Plug & Play device found
[ 1.368300] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.388677] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.411621] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.447198] Linux agpgart interface v0.103
[ 1.447264] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.447309] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.447969] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.448053] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.448148] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.448149] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.448807] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.448876] mousedev: PS/2 mouse device common for all mice
[ 1.448910] rtc_cmos 00:05: RTC can wake from S4
[ 1.448997] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.449023] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.449072] cpuidle: using governor ladder
[ 1.449130] cpuidle: using governor menu
[ 1.449236] TCP cubic registered
[ 1.449310] NET: Registered protocol family 10
[ 1.449630] Mobile IPv6
[ 1.449631] NET: Registered protocol family 17
[ 1.449633] Registering the dns_resolver key type
[ 1.449646] Using IPI No-Shortcut mode
[ 1.449714] PM: Hibernation image not present or could not be loaded.
[ 1.449720] registered taskstats version 1
[ 1.452125] rtc_cmos 00:05: setting system clock to 2013-03-28 06:03:30 UTC (1364450610)
[ 1.452169] Initializing network drop monitor service
[ 1.452240] Freeing unused kernel memory: 412k freed
[ 1.452363] Write protecting the kernel text: 2840k
[ 1.452404] Write protecting the kernel read-only data: 1088k
[ 1.452405] NX-protecting the kernel data: 3304k
[ 1.459523] udevd[56]: starting version 175
[ 1.468477] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.479871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.479890] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.479919] r8169 0000:05:00.0: setting latency timer to 64
[ 1.479984] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 1.480336] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8222000, 14:da:e9:df:b5:7a, XID 0c200000 IRQ 45
[ 1.480340] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.481400] usbcore: registered new interface driver usbfs
[ 1.481419] usbcore: registered new interface driver hub
[ 1.483620] SCSI subsystem initialized
[ 1.486171] usbcore: registered new device driver usb
[ 1.486174] libata version 3.00 loaded.
[ 1.486510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.486534] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.486557] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.486561] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.486581] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.486606] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.490490] ehci_hcd 0000:00:1a.0: Enabling legacy PCI PM
[ 1.490538] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.490558] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe506000
[ 1.491311] pata_via 0000:03:00.0: version 0.3.4
[ 1.491324] pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.491359] pata_via 0000:03:00.0: setting latency timer to 64
[ 1.492578] scsi0 : pata_via
[ 1.492849] scsi1 : pata_via
[ 1.492986] ata1: PATA max UDMA/133 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 16
[ 1.492988] ata2: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 16
[ 1.503004] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.503055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.503057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.503058] usb usb1: Product: EHCI Host Controller
[ 1.503059] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.503061] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.503154] hub 1-0:1.0: USB hub found
[ 1.503159] hub 1-0:1.0: 2 ports detected
[ 1.503223] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.503237] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.503240] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.503245] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.503264] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.507136] ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM
[ 1.507144] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.507149] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe505000
[ 1.523010] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.523049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.523051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.523052] usb usb2: Product: EHCI Host Controller
[ 1.523053] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.523054] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.523133] hub 2-0:1.0: USB hub found
[ 1.523136] hub 2-0:1.0: 2 ports detected
[ 1.523185] ata_piix 0000:00:1f.2: version 2.13
[ 1.523202] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.523208] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.678878] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 1.678894] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.679237] scsi2 : ata_piix
[ 1.679304] scsi3 : ata_piix
[ 1.680039] ata3: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
[ 1.680041] ata4: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
[ 1.680057] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.680062] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.814764] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.834756] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.834775] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.834989] scsi4 : ata_piix
[ 1.835051] scsi5 : ata_piix
[ 1.835689] ata5: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
[ 1.835691] ata6: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
[ 1.851647] ata4.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[ 1.851652] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.867659] ata4.00: configured for UDMA/133
[ 1.867839] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[ 1.947039] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.947044] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.947292] hub 1-1:1.0: USB hub found
[ 1.947388] hub 1-1:1.0: 6 ports detected
[ 2.013019] Refined TSC clocksource calibration: 3311.142 MHz.
[ 2.013023] Switching to clocksource tsc
[ 2.016042] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.016083] sd 3:0:0:0: [sda] Write Protect is off
[ 2.016086] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.016103] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.042992] sda: sda1 sda2 < sda5 sda6 >
[ 2.043267] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.044314] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 2.066566] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.198817] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.198822] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.199108] hub 2-1:1.0: USB hub found
[ 2.199173] hub 2-1:1.0: 8 ports detected
[ 2.470341] usb 2-1.4: new low-speed USB device number 3 using ehci_hcd
[ 2.840952] PM: Starting manual resume from disk
[ 2.840955] PM: Hibernation image partition 8:5 present
[ 2.840955] PM: Looking for hibernation image.
[ 2.841170] PM: Image not found (code -22)
[ 2.841174] PM: Hibernation image not present or could not be loaded.
[ 2.864772] kjournald starting. Commit interval 5 seconds
[ 2.864785] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.874249] usb 2-1.4: New USB device found, idVendor=0d9f, idProduct=00a4
[ 2.874255] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.874258] usb 2-1.4: Product: UPS WOW--700U FW3.A4
[ 2.874260] usb 2-1.4: Manufacturer: POWERCOM Co.,LTD
[ 2.874262] usb 2-1.4: SerialNumber: 3A4-0000-0001
[ 2.945943] usb 2-1.5: new low-speed USB device number 4 using ehci_hcd
[ 3.041697] usb 2-1.5: New USB device found, idVendor=0458, idProduct=003a
[ 3.041702] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.041705] usb 2-1.5: Product: Optical Mouse
[ 3.041707] usb 2-1.5: Manufacturer: Genius
[ 3.113802] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
[ 3.207841] usb 2-1.6: New USB device found, idVendor=09da, idProduct=9033
[ 3.207846] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.207849] usb 2-1.6: Product: USB Device
[ 3.207851] usb 2-1.6: Manufacturer: A4TECH
[ 3.277670] usb 2-1.8: new high-speed USB device number 6 using ehci_hcd
[ 3.373749] usb 2-1.8: New USB device found, idVendor=05e3, idProduct=0723
[ 3.373754] usb 2-1.8: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 3.373757] usb 2-1.8: Product: USB Storage
[ 3.373759] usb 2-1.8: Manufacturer: Generic
[ 4.277098] udevd[340]: starting version 175
[ 4.664174] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.664179] ACPI: Power Button [PWRB]
[ 4.664227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.664229] ACPI: Power Button [PWRF]
[ 4.664632] ACPI: Requesting acpi_cpufreq
[ 4.687009] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.691569] iTCO_vendor_support: vendor-support=0
[ 4.692538] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.692607] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.692661] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.692919] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.695431] wmi: Mapper loaded
[ 4.710573] parport_pc 00:03: reported by Plug and Play ACPI
[ 4.710622] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 4.759994] asus_wmi: ASUS WMI generic driver loaded
[ 4.760801] asus_wmi: Initialization: 0x0
[ 4.760817] asus_wmi: BIOS WMI version: 0.9
[ 4.760847] asus_wmi: SFUN value: 0x0
[ 4.761026] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[ 4.761486] asus_wmi: Backlight controlled by ACPI video driver
[ 4.837618] [drm] Initialized drm 1.1.0 20060810
[ 4.853512] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.853515] i915 0000:00:02.0: setting latency timer to 64
[ 4.864146] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 4.864148] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 4.864324] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 4.864327] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.864328] [drm] Driver supports precise vblank timestamp query.
[ 4.864348] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.150148] fbcon: inteldrmfb (fb0) is primary device
[ 5.327899] Console: switching to colour frame buffer device 240x67
[ 5.332594] fb0: inteldrmfb frame buffer device
[ 5.332595] drm: registered panic notifier
[ 5.333215] fixme: max PWM is zero.
[ 5.333312] acpi device:37: registered as cooling_device4
[ 5.333462] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 5.333505] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.333547] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.333581] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.333635] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.333659] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.432366] usbcore: registered new interface driver uas
[ 5.457087] Initializing USB Mass Storage driver...
[ 5.457180] usb-storage 2-1.8:1.0: Quirks match for vid 05e3 pid 0723: 8000
[ 5.457274] scsi6 : usb-storage 2-1.8:1.0
[ 5.457358] usbcore: registered new interface driver usb-storage
[ 5.457360] USB Mass Storage support registered.
[ 5.468861] generic-usb 0003:0D9F:00A4.0001: hiddev0,hidraw0: USB HID v1.00 Device [POWERCOM Co.,LTD UPS WOW--700U FW3.A4 ] on usb-0000:00:1d.0-1.4/input0
[ 5.470888] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[ 5.470958] generic-usb 0003:0458:003A.0002: input,hidraw1: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 5.472397] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7
[ 5.473039] generic-usb 0003:09DA:9033.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.6/input0
[ 5.474157] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input8
[ 5.474253] generic-usb 0003:09DA:9033.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.6/input1
[ 5.474267] usbcore: registered new interface driver usbhid
[ 5.474269] usbhid: USB HID core driver
[ 5.937197] hda_codec: ALC887-VD: BIOS auto-probing.
[ 5.955347] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.955497] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.955754] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.456375] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
[ 6.456758] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.459963] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.945263] Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k
[ 7.470828] EXT3-fs (sda1): using internal journal
[ 7.611729] loop: module loaded
[ 8.512757] kjournald starting. Commit interval 5 seconds
[ 8.513061] EXT3-fs (sda6): using internal journal
[ 8.513064] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 9.164300] r8169 0000:05:00.0: eth0: link down
[ 9.164306] r8169 0000:05:00.0: eth0: link down
[ 9.164375] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.798673] r8169 0000:05:00.0: eth0: link up
[ 10.798734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.442594] fuse init (API version 7.17)
[ 21.406297] eth0: no IPv6 routers present
Reply to: