[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#701777: please enable AR5523 for kernel >= 3.8



Package: src:linux
Version: 3.8-1~experimental.1
Severity: wishlist
Tags: patch experimental

Hi

Please enable the ar5523 kernel module for kernel >= 3.8, it is needed 
for the QCA Atheros AR5005UG (USB 2.0, IEEE802.11G/ Turbo G) wlan 
chipset. Popular devices using this chipset are early revisions of 
Netgear WG111T, WG111U, WPN111 and the TP-Link TL-WN620G, which were 
commonly sold between late 2004 and mid 2009.

Please consider that this kernel module requires a redistributable, but
non-free binary firmware, see http://bugs.debian.org/700826


Index: debian/config/config
===================================================================
--- debian/config/config	(revision 19863)
+++ debian/config/config	(working copy)
@@ -2376,6 +2376,11 @@
 # CONFIG_CARL9170_HWRNG is not set
 
 ##
+## file: drivers/net/wireless/ath/ar5523/Kconfig
+##
+CONFIG_AR5523=m
+
+##
 ## file: drivers/net/wireless/b43/Kconfig
 ##
 CONFIG_B43=m


[ 2209.669039] usb 2-7: new high-speed USB device number 3 using ehci-pci
[ 2209.784545] usb 2-7: New USB device found, idVendor=1385, idProduct=4251
[ 2209.784556] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2209.784563] usb 2-7: Product: WG111T
[ 2209.784570] usb 2-7: Manufacturer: Atheros Communications Inc
[ 2209.784575] usb 2-7: SerialNumber: 1.0
[ 2209.939904] usbcore: registered new interface driver ar5523
[ 2210.088330] usb 2-7: USB disconnect, device number 3
[ 2210.320040] usb 2-7: new high-speed USB device number 4 using ehci-pci
[ 2210.435278] usb 2-7: New USB device found, idVendor=1385, idProduct=4250
[ 2210.435287] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2210.435295] usb 2-7: Product: WG111T
[ 2210.435301] usb 2-7: Manufacturer: Atheros Communications Inc
[ 2210.435307] usb 2-7: SerialNumber: 1.0
[ 2210.483029] usb 2-7: Cap: CAP_TARGET_VERSION=0x00000006
[ 2210.483393] usb 2-7: Cap: CAP_TARGET_REVISION=0x00000001
[ 2210.483643] usb 2-7: Cap: CAP_MAC_VERSION=0x00000008
[ 2210.484056] usb 2-7: Cap: CAP_MAC_REVISION=0x00000001
[ 2210.484406] usb 2-7: Cap: CAP_PHY_REVISION=0x00000046
[ 2210.484644] usb 2-7: Cap: CAP_ANALOG_5GHz_REVISION=0x00000046
[ 2210.485045] usb 2-7: Cap: CAP_ANALOG_2GHz_REVISION=0x00000000
[ 2210.485405] usb 2-7: Cap: CAP_REG_DOMAIN=0x00000000
[ 2210.485767] usb 2-7: Cap: CAP_REG_CAP_BITS=0x00000000
[ 2210.486055] usb 2-7: Cap: CAP_WIRELESS_MODES=0x00000000
[ 2210.486406] usb 2-7: Cap: CAP_CHAN_SPREAD_SUPPORT=0x0000001c
[ 2210.486643] usb 2-7: Cap: CAP_COMPRESS_SUPPORT=0x00000001
[ 2210.487045] usb 2-7: Cap: CAP_BURST_SUPPORT=0x00000001
[ 2210.487403] usb 2-7: Cap: CAP_FAST_FRAMES_SUPPORT=0x00000001
[ 2210.487767] usb 2-7: Cap: CAP_CHAP_TUNING_SUPPORT=0x00000001
[ 2210.488048] usb 2-7: Cap: CAP_TURBOG_SUPPORT=0x00000001
[ 2210.488403] usb 2-7: Cap: CAP_TURBO_PRIME_SUPPORT=0x00000001
[ 2210.488643] usb 2-7: Cap: CAP_DEVICE_TYPE=0x00000001
[ 2210.489050] usb 2-7: Cap: CAP_WME_SUPPORT=0x00000001
[ 2210.489402] usb 2-7: Cap: CAP_TOTAL_QUEUES=0x00000001
[ 2210.489643] usb 2-7: Cap: CAP_CONNECTION_ID_MAX=0x0000000a
[ 2210.490045] usb 2-7: Cap: CAP_LOW_5GHZ_CHAN=0x00000004
[ 2210.490402] usb 2-7: Cap: CAP_HIGH_5GHZ_CHAN=0x00001338
[ 2210.490769] usb 2-7: Cap: CAP_LOW_2GHZ_CHAN=0x000017d4
[ 2210.491045] usb 2-7: Cap: CAP_HIGH_2GHZ_CHAN=0x00000908
[ 2210.491402] usb 2-7: Cap: CAP_TWICE_ANTENNAGAIN_5G=0x00000001
[ 2210.491768] usb 2-7: Cap: CAP_TWICE_ANTENNAGAIN_2G=0x00000004
[ 2210.492049] usb 2-7: Cap: CAP_CIPHER_AES_CCM=0x00000001
[ 2210.492403] usb 2-7: Cap: CAP_CIPHER_TKIP=0x00000000
[ 2210.492645] usb 2-7: Cap: CAP_MIC_TKIP=0x00000000
[ 2210.493402] usb 2-7: MAC/BBP AR5523, RF AR2112
[ 2210.494079] usb 2-7: Found and initialized AR5523 device
[ 2227.819108] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2264.734197] wlan1: authenticate with [MAC address redacted]
[ 2264.737737] wlan1: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 2264.742985] wlan1: send auth to [MAC address redacted] (try 1/3)
[ 2264.745102] wlan1: authenticated
[ 2264.746054] wlan1: associate with [MAC address redacted] (try 1/3)
[ 2264.750097] wlan1: RX AssocResp from [MAC address redacted] (capab=0x411 status=0 aid=1)
[ 2264.751084] wlan1: associated
[ 2264.751145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2264.751265] cfg80211: Calling CRDA for country: DE
[ 2264.762834] ath: regdomain 0x8114 updated by CountryIE
[ 2264.762844] ath: EEPROM regdomain: 0x8114
[ 2264.762848] ath: EEPROM indicates we should expect a country code
[ 2264.762853] ath: doing EEPROM country->regdmn map search
[ 2264.762857] ath: country maps to regdmn code: 0x37
[ 2264.762861] ath: Country alpha2 being used: DE
[ 2264.762865] ath: Regpair used: 0x37
[ 2264.762870] cfg80211: Regulatory domain changed to country: DE
[ 2264.762874] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2264.762879] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762884] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762889] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762894] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)

Regards
	Stefan Lippers-Hollmann

Attachment: signature.asc
Description: This is a digitally signed message part.


Reply to: