Bug#701525: linux-image-3.2.0-4-amd64: Lenovo B575 ports doesn't work correctly
Package: src:linux
Version: 3.2.35-2
Severity: important
Tags: upstream
There is a problem with card reader rts5139 module. When I insert pendrive
to port on the right side it is not visible. To solve that problem
I have to blacklist rts5139 module.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/Adam-root ro radeon.audio=1 panic=0 quiet
** Tainted: CO (5120)
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 977.716506] PM: late suspend of devices complete after 63.969 msecs
[ 977.716553] ACPI: Preparing to enter system sleep state S3
[ 977.777176] PM: Saving platform NVS memory
[ 977.789455] Disabling non-boot CPUs ...
[ 977.792086] CPU 1 is now offline
[ 977.792847] ACPI: Low-level resume complete
[ 977.792847] PM: Restoring platform NVS memory
[ 977.792847] Enabling non-boot CPUs ...
[ 977.792847] Booting Node 0 Processor 1 APIC 0x1
[ 977.792847] smpboot cpu 1: start_ip = 98000
[ 977.792047] Calibrating delay loop (skipped) already calibrated this CPU
[ 977.825844] NMI watchdog enabled, takes one hw-pmu counter.
[ 977.826895] CPU1 is up
[ 977.828298] ACPI: Waking up from system sleep state S3
[ 977.997359] PM: early resume of devices complete after 33.571 msecs
[ 977.997633] radeon 0000:00:01.0: setting latency timer to 64
[ 977.997701] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 977.997787] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 978.001604] pcieport 0000:00:15.0: wake-up capability disabled by ACPI
[ 978.033781] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 978.034111] radeon 0000:00:01.0: WB enabled
[ 978.063938] [drm] ring test succeeded in 1 usecs
[ 978.063968] [drm] ib test succeeded in 0 usecs
[ 978.072564] sd 0:0:0:0: [sda] Starting disk
[ 978.340370] usb 5-1: reset full-speed USB device number 2 using ohci_hcd
[ 978.384214] ata3: SATA link down (SStatus 0 SControl 300)
[ 978.556222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 978.566595] ata2.00: configured for UDMA/100
[ 978.608406] usb 2-3: reset high-speed USB device number 2 using ehci_hcd
[ 978.852270] usb 2-5: reset high-speed USB device number 3 using ehci_hcd
[ 979.120415] usb 3-5: reset full-speed USB device number 2 using ohci_hcd
[ 979.285354] btusb 3-5:1.0: no reset_resume for driver btusb?
[ 979.285363] btusb 3-5:1.1: no reset_resume for driver btusb?
[ 980.964195] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 981.025086] ata1.00: configured for UDMA/133
[ 981.094677] PM: resume of devices complete after 3097.204 msecs
[ 981.216622] Restarting kernel threads ... done.
[ 981.216941] Restarting tasks ... done.
[ 981.277121] PM: Basic memory bitmaps freed
[ 981.277962] video LNXVIDEO:01: Restoring backlight state
[ 991.091716] r8169 0000:02:00.0: eth0: link down
[ 991.094548] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 991.160925] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 993.542831] wlan0: authenticate with 00:13:49:ca:a6:0b (try 1)
[ 993.544742] wlan0: authenticated
[ 993.563881] wlan0: associate with 00:13:49:ca:a6:0b (try 1)
[ 993.566187] wlan0: RX AssocResp from 00:13:49:ca:a6:0b (capab=0x401 status=0 aid=3)
[ 993.566197] wlan0: associated
[ 993.568629] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1004.560088] wlan0: no IPv6 routers present
[ 1153.239728] tun: Universal TUN/TAP device driver, 1.6
[ 1153.239743] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1700.191864] usbcore: deregistering interface driver rts5139
[ 1909.424383] usb 2-2: new high-speed USB device number 4 using ehci_hcd
[ 1909.558192] usb 2-2: New USB device found, idVendor=0781, idProduct=5151
[ 1909.558208] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1909.558218] usb 2-2: Product: Cruzer Micro
[ 1909.558225] usb 2-2: Manufacturer: SanDisk
[ 1909.558232] usb 2-2: SerialNumber: 22428307B7908C6C
[ 1909.678896] Initializing USB Mass Storage driver...
[ 1909.679405] scsi4 : usb-storage 2-2:1.0
[ 1909.679731] usbcore: registered new interface driver usb-storage
[ 1909.679739] USB Mass Storage support registered.
[ 1910.678595] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 1910.684106] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1910.684842] sd 4:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 1910.685498] sd 4:0:0:0: [sdb] Write Protect is off
[ 1910.685515] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1910.686057] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1910.686069] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1910.692819] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1910.692836] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1910.694773] sdb: sdb1
[ 1910.699793] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1910.699805] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1910.699813] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1967.160095] sdb: detected capacity change from 4023385600 to 0
[ 1974.772729] usb 2-2: USB disconnect, device number 4
[ 1980.228081] usb 2-2: new high-speed USB device number 5 using ehci_hcd
[ 1980.361892] usb 2-2: New USB device found, idVendor=0781, idProduct=5151
[ 1980.361903] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1980.361909] usb 2-2: Product: Cruzer Micro
[ 1980.361914] usb 2-2: Manufacturer: SanDisk
[ 1980.361918] usb 2-2: SerialNumber: 22428307B7908C6C
[ 1980.367913] scsi5 : usb-storage 2-2:1.0
[ 1981.372809] scsi 5:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 1981.375286] sd 5:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 1981.375768] sd 5:0:0:0: [sdb] Write Protect is off
[ 1981.375777] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1981.376278] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1981.376288] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1981.376912] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1981.380275] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1981.380287] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1981.383262] sdb: sdb1
[ 1981.387796] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1981.387809] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1981.387816] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 2689.877299] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 2714.915854] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
** Model information
sys_vendor: LENOVO
product_name: Brazos
product_version: Lenovo B575
chassis_vendor: LENOVO
chassis_version: Chassis Version Unknown
bios_vendor: LENOVO
bios_version: 52CN15WW
board_vendor: LENOVO
board_name: Inagua
board_version: 109-B78210-00A
** Loaded modules:
usb_storage
tun
fuse
btrfs
crc32c
libcrc32c
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
nf_conntrack_ipv6
hidp
hid
nf_defrag_ipv6
ip6table_filter
ip6_tables
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
xt_multiport
iptable_filter
ip_tables
x_tables
rfcomm
parport_pc
ppdev
lp
parport
bnep
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
deflate
zlib_deflate
ctr
twofish_generic
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia
serpent
blowfish_generic
blowfish_x86_64
blowfish_common
cast5
des_generic
cbc
xcbc
rmd160
sha512_generic
sha256_generic
sha1_ssse3
sha1_generic
hmac
crypto_null
af_key
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext2
loop
joydev
uvcvideo
arc4
videodev
ath9k
v4l2_compat_ioctl32
btusb
bluetooth
media
ath9k_common
ath9k_hw
sp5100_tco
radeon
ath
mac80211
acer_wmi
snd_hda_codec_conexant
cfg80211
i2c_piix4
snd_hda_codec_hdmi
powernow_k8
psmouse
ttm
mperf
pcspkr
serio_raw
drm_kms_helper
k10temp
evdev
drm
snd_hda_intel
snd_hda_codec
i2c_algo_bit
ideapad_laptop
i2c_core
snd_hwdep
sparse_keymap
rfkill
ac
battery
power_supply
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
video
button
processor
wmi
ext4
crc16
jbd2
mbcache
cryptd
aes_x86_64
aes_generic
xts
gf128mul
dm_crypt
dm_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
r8169
mii
thermal
thermal_sys
ahci
ohci_hcd
libahci
libata
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 14h Processor Root Complex [1022:1510]
Subsystem: Lenovo Device [17aa:397b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at e0200000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] [1002:1314]
Subsystem: Lenovo Device [17aa:397b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at e0244000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2118 [size=8]
Region 1: I/O ports at 2124 [size=4]
Region 2: I/O ports at 2110 [size=8]
Region 3: I/O ports at 2120 [size=4]
Region 4: I/O ports at 2100 [size=16]
Region 5: Memory at e024b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e024a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e024b500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0249000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e024b400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Lenovo Device [17aa:397b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Lenovo Device [17aa:397b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:397b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0248000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Lenovo Device [17aa:30a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b272 Chicony Electronics Co., Ltd Lenovo EasyCamera
Bus 002 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Card reader
Bus 003 Device 002: ID 0489:e00d Foxconn / Hon Hai Broadcom Bluetooth 2.1 Device
Bus 005 Device 002: ID 1c7a:0603 LighTuning Technology Inc.
Bus 002 Device 005: ID 0781:5151 SanDisk Corp. Cruzer Micro Flash Drive
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: