reassign 649597 src:linux thanks
On Dienstag, 22. November 2011, Alain SAURAT wrote: > Package: base > Severity: normal > > I have connected two USB disk which are exactly indentical. > The disks are Iomega 320Go and their ID is "ST332082_0AS_5F542FFFFFFF" > > The 1st have 4 partitions and the 2nd only one. > > "cat /dev/disk/by-id" only show a disk with 4 partitions : > > usb-ST332082_0AS_5F542FFFFFFF-0:0 > usb-ST332082_0AS_5F542FFFFFFF-0:0-part1 > usb-ST332082_0AS_5F542FFFFFFF-0:0-part2 > usb-ST332082_0AS_5F542FFFFFFF-0:0-part3 > usb-ST332082_0AS_5F542FFFFFFF-0:0-part4 > > But there is cross references: > > If I make "dd if=/dev/disk/by-id/usb-ST332082_0AS_5F542FFFFFFF-0\:0 of=ggg > count=1" > > I can see with "hd ggg" that this is the 2nd disk partition table and not > the 1st. > > idem if I test with "usb-ST332082_0AS_5F542FFFFFFF-0:0-part1", but with 2,3 > and 4 this is really the parts of the 1st disk. > > So I suppose that during detection of the 1st disk, id are created > correctly and when the 2nd is detected id are re-writen with the same > name. > > system Infos: > wheezy/sid on Marvell sheevaplug > Linux SheevaDaily 3.0.0-1-kirkwood #1 Sun Aug 28 14:30:35 UTC 2011 armv5tel > GNU/Linux > > > > -- System Information: > Debian Release: squeeze/sid > APT prefers lucid-updates > APT policy: (500, 'lucid-updates'), (500, 'lucid-security'), (500, > 'lucid-backports'), (500, 'lucid') Architecture: i386 (i686) > > Kernel: Linux 2.6.32-35-generic-pae (SMP w/2 CPU cores) > Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash
|