Bug#701050: linux-image-3.2.0-4-amd64: Wrong battery capacity values on HP Folio 13-2000
Package: src:linux
Version: 3.2.35-2
Severity: normal
Dear Maintainer,
while my BIOS/UEFI reports a battery charge capacity of 92% for my notebook-
battery, upower still reports a charge capacity of 100% (AFAIK upower gets this
information from the kernel - I believe this to be a kernel ACPI bug). I
suspect this issue to be part of my power problems reported in bug #695634 and
bug #684186 - my notebook fails to execute action (hibernate) on critical
battery condition. I'll add the information provided by UEFI (1.) and by upower
(2.).
(1.) Here's the information provided by the HP UEFI Support Environment:
Charge Capacity: 92%
Warranty Type: 1 year
Cycle Count: 187
Manufacturer: 13-17
Battery Age: 391 days
Serial Number: 01317 01/24/2012
Temperature: 36 °C
Design Capacity: 5400 mAh
Full Charge Capacity: 5020 mAh
Remaining Capacity: 2499 mAh
Current: 1797 mA
Battery Status: OK(1)
FAILURE ID: OK
Terminal Voltage: 11143 mV
Design Voltage: 11100 mV
Cell Voltage 1: 3710 mV
Cell Voltage 2: 3735 mV
Cell Voltage 3: 3700 mV
Cell Voltage 4: 0 mV
Status: 00C0
AC Power: No
CT Number: 6CLFH02BJ2E08M
(2.) Here's the information provided by upower ('upower --dump'):
Device: /org/freedesktop/UPower/devices/battery_BAT1
native-path:
/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT1
vendor: 13-17
model: Venturi
serial: 01317 01/24/2012
power supply: yes
updated: Wed Feb 20 23:57:03 2013 (23 seconds ago)
has history: yes
has statistics: yes
battery
present: yes
rechargeable: yes
state: discharging
energy: 28.771 Wh
energy-empty: 0 Wh
energy-full: 59.94 Wh
energy-full-design: 59.94 Wh
energy-rate: 20.668 W
voltage: 11.103 V
time to empty: 1.4 hours
percentage: 47.9997%
capacity: 100%
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4f9dc00c-6e8b-431d-b71f-d7bbc5960ad8 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 3.432525] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 3.432529] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90011088000
[ 3.432533] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
[ 3.432781] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 3.432898] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 3.433028] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.448618] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 3.448620] iwlwifi 0000:02:00.0: Device SKU: 0X150
[ 3.448623] iwlwifi 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 3.448652] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 3.483191] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[ 3.483196] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.483773] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 3.483780] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.483783] [drm] Driver supports precise vblank timestamp query.
[ 3.483824] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.490239] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory
[ 3.490248] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 3.490556] Registered led device: phy0-led
[ 3.496268] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.509769] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 3.509853] usbcore: registered new interface driver uvcvideo
[ 3.509856] USB Video Class driver (1.1.1)
[ 3.831764] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 4.086773] rts_pstor: device scan complete
[ 4.087092] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 4.087242] Bad LUN (0:1)
[ 4.087546] Bad target number (1:0)
[ 4.087848] Bad target number (2:0)
[ 4.088152] Bad target number (3:0)
[ 4.088454] Bad target number (4:0)
[ 4.088758] Bad target number (5:0)
[ 4.089060] Bad target number (6:0)
[ 4.089314] Bad target number (7:0)
[ 4.089730] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.090411] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.116191] fbcon: inteldrmfb (fb0) is primary device
[ 4.308482] Console: switching to colour frame buffer device 170x48
[ 4.318392] fb0: inteldrmfb frame buffer device
[ 4.318397] drm: registered panic notifier
[ 4.325575] acpi device:33: registered as cooling_device6
[ 4.326327] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.326506] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.326636] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.326880] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.326955] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.885811] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.906363] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.906715] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.906986] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.907232] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.053500] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00
[ 5.180231] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 5.676102] Adding 4633596k swap on /dev/sda5. Priority:-1 extents:1 across:4633596k SS
[ 5.707045] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 5.785300] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.823020] loop: module loaded
[ 6.581872] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.164261] RPC: Registered named UNIX socket transport module.
[ 7.164271] RPC: Registered udp transport module.
[ 7.164278] RPC: Registered tcp transport module.
[ 7.164284] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.173007] FS-Cache: Loaded
[ 7.184583] FS-Cache: Netfs 'nfs' registered for caching
[ 7.193964] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.024717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.024722] Bluetooth: BNEP filters: protocol multicast
[ 8.025179] Bluetooth: RFCOMM TTY layer initialized
[ 8.025187] Bluetooth: RFCOMM socket layer initialized
[ 8.025191] Bluetooth: RFCOMM ver 1.11
[ 8.103988] lp: driver loaded but no devices found
[ 8.109824] ppdev: user-space parallel port driver
[ 8.216975] r8169 0000:01:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[ 8.296584] r8169 0000:01:00.0: eth0: link down
[ 8.297009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.300582] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 8.307292] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 8.393544] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 8.400242] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 8.504088] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.831042] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 9.479323] wlan0: authenticate with 70:72:3c:20:76:08 (try 1)
[ 9.481733] wlan0: authenticated
[ 9.494523] wlan0: associate with 70:72:3c:20:76:08 (try 1)
[ 9.498510] wlan0: RX AssocResp from 70:72:3c:20:76:08 (capab=0x431 status=0 aid=1)
[ 9.498519] wlan0: associated
[ 9.520159] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9.520370] cfg80211: Calling CRDA for country: CA
[ 9.528143] cfg80211: Regulatory domain changed to country: CA
[ 9.528150] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.528157] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9.528162] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9.528167] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.528172] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.528177] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 20.494985] wlan0: no IPv6 routers present
[ 22.788513] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 22.789773] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:37/input13
[ 22.790316] generic-bluetooth 0005:045E:0700.0001: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01
[ 30.342081] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 70:72:3c:20:76:08 tid = 0
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Folio 13 - 2000 Notebook PC
product_version: 0687100400204A00000330100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.18
board_vendor: Hewlett-Packard
board_name: 1899
board_version: 46.80
** Loaded modules:
hidp
hid
parport_pc
ppdev
lp
parport
rfcomm
bnep
binfmt_misc
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
joydev
snd_hda_codec_hdmi
snd_hda_codec_idt
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
iwlwifi
snd_seq
snd_seq_device
i915
snd_timer
coretemp
uvcvideo
crc32c_intel
mac80211
videodev
psmouse
v4l2_compat_ioctl32
hp_wmi
ghash_clmulni_intel
btusb
bluetooth
aesni_intel
media
sparse_keymap
aes_x86_64
evdev
pcspkr
aes_generic
cryptd
serio_raw
i2c_i801
snd
drm_kms_helper
battery
ac
drm
cfg80211
rts_pstor(C)
power_supply
soundcore
i2c_algo_bit
rfkill
i2c_core
acpi_cpufreq
mperf
iTCO_wdt
wmi
video
iTCO_vendor_support
tpm_tis
tpm
button
tpm_bios
processor
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ahci
libahci
libata
xhci_hcd
scsi_mod
ehci_hcd
sdhci_pci
sdhci
mmc_core
usbcore
r8169
mii
usb_common
fan
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at c2704000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at c2700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c2600000-c26fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c1600000-c25fffff
Prefetchable memory behind bridge: 00000000c0500000-00000000c14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: c1500000-c15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c2708000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at c2707000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c2705000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008b] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5315]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c1601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts_pstor
03:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at c1600000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.0 USB controller [0c03]: Fresco Logic FL1009 USB 3.0 Host Controller [1b73:1009] (rev 02) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at c1510000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at c1511000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1bcf:2c07 Sunplus Innovation Technology Inc.
Bus 001 Device 004: ID 8086:0189 Intel Corp.
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: