[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#700826: please add ar5523.bin to firmware-atheros



Package: firmware-atheros
Version: 0.37
Severity: wishlist
Tags: experimental

Hi

The ar5523 kernel module (USB 2.0 wlan card, IEEE802.11G/ Turbo G) has 
been merged into kernel 3.8, therefore it would be nice to have its
firmware available too.

The license follows the one used for the existing QCA Atheros firmware 
images and should be freely redistributable:

  Copyright (c) 2008-2010, Atheros Communications, Inc.
  All rights reserved.
  
  Redistribution.  Redistribution and use in binary form, without
  modification, are permitted provided that the following conditions are
  met:
  
  * Redistributions must reproduce the above copyright notice and the
    following disclaimer in the documentation and/or other materials
    provided with the distribution.
  
  * Neither the name of Atheros Communications, Inc. nor the names of
    its suppliers may be used to endorse or promote products derived
    from this software without specific prior written permission.
  
  * No reverse engineering, decompilation, or disassembly of this
    software is permitted.
  
  Limited patent license.  Atheros Communications, Inc. grants a
  world-wide, royalty-free, non-exclusive license under patents it
  now or hereafter owns or controls to make, have made, use, import,
  offer to sell and sell ("Utilize") this software, but solely to
  the extent that any such patent is necessary to Utilize the software
  in conjunction with an Atheros Chipset. The patent license shall not
  apply to any other combinations which include this software. No
  hardware per se is licensed hereunder.
  
  DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
  BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
  FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The firmware image is available from upstream linux-firmware.git and I 
have successfully tested it with ar5523.ko in v3.8(-rc7-93-gf741656).

$ md5sum -b /lib/firmware/ar5523.bin 
78fe4478dca9134c028e7507421b3f6a */lib/firmware/ar5523.bin

[ 2209.669039] usb 2-7: new high-speed USB device number 3 using ehci-pci
[ 2209.784545] usb 2-7: New USB device found, idVendor=1385, idProduct=4251
[ 2209.784556] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2209.784563] usb 2-7: Product: WG111T
[ 2209.784570] usb 2-7: Manufacturer: Atheros Communications Inc
[ 2209.784575] usb 2-7: SerialNumber: 1.0
[ 2209.939904] usbcore: registered new interface driver ar5523
[ 2210.088330] usb 2-7: USB disconnect, device number 3
[ 2210.320040] usb 2-7: new high-speed USB device number 4 using ehci-pci
[ 2210.435278] usb 2-7: New USB device found, idVendor=1385, idProduct=4250
[ 2210.435287] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2210.435295] usb 2-7: Product: WG111T
[ 2210.435301] usb 2-7: Manufacturer: Atheros Communications Inc
[ 2210.435307] usb 2-7: SerialNumber: 1.0
[ 2210.483029] usb 2-7: Cap: CAP_TARGET_VERSION=0x00000006
[ 2210.483393] usb 2-7: Cap: CAP_TARGET_REVISION=0x00000001
[ 2210.483643] usb 2-7: Cap: CAP_MAC_VERSION=0x00000008
[ 2210.484056] usb 2-7: Cap: CAP_MAC_REVISION=0x00000001
[ 2210.484406] usb 2-7: Cap: CAP_PHY_REVISION=0x00000046
[ 2210.484644] usb 2-7: Cap: CAP_ANALOG_5GHz_REVISION=0x00000046
[ 2210.485045] usb 2-7: Cap: CAP_ANALOG_2GHz_REVISION=0x00000000
[ 2210.485405] usb 2-7: Cap: CAP_REG_DOMAIN=0x00000000
[ 2210.485767] usb 2-7: Cap: CAP_REG_CAP_BITS=0x00000000
[ 2210.486055] usb 2-7: Cap: CAP_WIRELESS_MODES=0x00000000
[ 2210.486406] usb 2-7: Cap: CAP_CHAN_SPREAD_SUPPORT=0x0000001c
[ 2210.486643] usb 2-7: Cap: CAP_COMPRESS_SUPPORT=0x00000001
[ 2210.487045] usb 2-7: Cap: CAP_BURST_SUPPORT=0x00000001
[ 2210.487403] usb 2-7: Cap: CAP_FAST_FRAMES_SUPPORT=0x00000001
[ 2210.487767] usb 2-7: Cap: CAP_CHAP_TUNING_SUPPORT=0x00000001
[ 2210.488048] usb 2-7: Cap: CAP_TURBOG_SUPPORT=0x00000001
[ 2210.488403] usb 2-7: Cap: CAP_TURBO_PRIME_SUPPORT=0x00000001
[ 2210.488643] usb 2-7: Cap: CAP_DEVICE_TYPE=0x00000001
[ 2210.489050] usb 2-7: Cap: CAP_WME_SUPPORT=0x00000001
[ 2210.489402] usb 2-7: Cap: CAP_TOTAL_QUEUES=0x00000001
[ 2210.489643] usb 2-7: Cap: CAP_CONNECTION_ID_MAX=0x0000000a
[ 2210.490045] usb 2-7: Cap: CAP_LOW_5GHZ_CHAN=0x00000004
[ 2210.490402] usb 2-7: Cap: CAP_HIGH_5GHZ_CHAN=0x00001338
[ 2210.490769] usb 2-7: Cap: CAP_LOW_2GHZ_CHAN=0x000017d4
[ 2210.491045] usb 2-7: Cap: CAP_HIGH_2GHZ_CHAN=0x00000908
[ 2210.491402] usb 2-7: Cap: CAP_TWICE_ANTENNAGAIN_5G=0x00000001
[ 2210.491768] usb 2-7: Cap: CAP_TWICE_ANTENNAGAIN_2G=0x00000004
[ 2210.492049] usb 2-7: Cap: CAP_CIPHER_AES_CCM=0x00000001
[ 2210.492403] usb 2-7: Cap: CAP_CIPHER_TKIP=0x00000000
[ 2210.492645] usb 2-7: Cap: CAP_MIC_TKIP=0x00000000
[ 2210.493402] usb 2-7: MAC/BBP AR5523, RF AR2112
[ 2210.494079] usb 2-7: Found and initialized AR5523 device
[ 2227.819108] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2264.734197] wlan1: authenticate with [MAC address redacted]
[ 2264.737737] wlan1: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 2264.742985] wlan1: send auth to [MAC address redacted] (try 1/3)
[ 2264.745102] wlan1: authenticated
[ 2264.746054] wlan1: associate with [MAC address redacted] (try 1/3)
[ 2264.750097] wlan1: RX AssocResp from [MAC address redacted] (capab=0x411 status=0 aid=1)
[ 2264.751084] wlan1: associated
[ 2264.751145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2264.751265] cfg80211: Calling CRDA for country: DE
[ 2264.762834] ath: regdomain 0x8114 updated by CountryIE
[ 2264.762844] ath: EEPROM regdomain: 0x8114
[ 2264.762848] ath: EEPROM indicates we should expect a country code
[ 2264.762853] ath: doing EEPROM country->regdmn map search
[ 2264.762857] ath: country maps to regdmn code: 0x37
[ 2264.762861] ath: Country alpha2 being used: DE
[ 2264.762865] ath: Regpair used: 0x37
[ 2264.762870] cfg80211: Regulatory domain changed to country: DE
[ 2264.762874] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2264.762879] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762884] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762889] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2264.762894] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)

Regards
	Stefan Lippers-Hollmann

Attachment: signature.asc
Description: This is a digitally signed message part.


Reply to: