Bug#700714: linux-image-3.7-trunk-686-pae: auto remount after umount with some HDD in USB3
Le Sat, 16 Feb 2013 15:03:52 +0000
Ben Hutchings <ben@decadent.org.uk> a écrit:
> Control: tag -1 moreinfo
>
> On Sat, 2013-02-16 at 15:29 +0100, gpe92 wrote:
> > Package: src:linux
> > Version: 3.7.8-1~experimental.1
> > Severity: important
> >
> > Dear Maintainer,
> >
> > I've an external HDD (WD Elements) connecting in USB3, when I
> > disconnet it in Gnome 3 ("Retirer le volume sans risque"), the disk is
> > unmounted but immediatly remounted ...
> > If I connected this HDD on USB2 there is no problem.
>
> Did this work properly in an earlier kernel version?
Not with kernel 3.6.9. I don't know for older ones.
>
> [...]
> > ** Tainted: PDO (4225)
> > * Proprietary module has been loaded.
> > * Kernel has oopsed before.
> > * Out-of-tree module has been loaded.
>
> Please remove virtualbox and nvidia, and re-test. (I doubt that this
> makes a difference, but we need to check.)
I've tested without virtualbox and the problem remains (dmesg is attached to
this mail).
If I remove nvidia, Gnome 3 don't run so I can't test.
But if nvidia is linked to this problem I think that all USB3 drives would be
affected but this is not the case.
Regards.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.7.8-1~experimental.1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de94bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de94c000-0x00000000df140fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df141000-0x00000000df388fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df389000-0x00000000df395fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df396000-0x00000000df3c0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df3c1000-0x00000000df3c5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df3c6000-0x00000000df408fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df409000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8P67 LE, BIOS 3702 12/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 21E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fcd70-0x000fcd7f] mapped at [c00fcd70]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x019fffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x377fffff] page 2M
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x379fdfff @ [mem 0x019f9000-0x019fffff]
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x37557fff]
[ 0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT df389070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP df393dd0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT df389168 0AC64 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS df3bff80 00040
[ 0.000000] ACPI: APIC df393ec8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG df393f40 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET df393f80 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT df393fb8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT df394328 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT df394cd8 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT df395770 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7798MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0x1effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xde94bfff]
[ 0.000000] node 0: [mem 0xdf409000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x00000000-0x1effffff]
[ 0.000000] On node 0 totalpages: 2088144
[ 0.000000] free_area_init_node: node 0, pgdat c145e140, node_mem_map f26e0200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15597 pages used for memmap
[ 0.000000] HighMem zone: 1844824 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b2000 s33728 r0 d23616 u57344
[ 0.000000] pcpu-alloc: s33728 r0 d23616 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2070767
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7-trunk-686-pae root=UUID=e80aa639-c277-4f03-af6c-7191a2f95083 ro quiet pci=routeirq
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
[ 0.000000] Memory: 8265580k/8896512k available (3000k kernel code, 86996k reserved, 1503k data, 432k init, 7441684k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1466000 - 0xc14d2000 ( 432 kB)
[ 0.000000] .data : 0xc12ee240 - 0xc1465f00 (1503 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12ee240 (3000 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f2006000 soft=f2008000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3310.768 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.53 BogoMIPS (lpj=13243072)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000017] Security Framework initialized
[ 0.000020] AppArmor: AppArmor disabled by boot time parameter
[ 0.000026] Mount-cache hash table entries: 512
[ 0.000143] Initializing cgroup subsys cpuacct
[ 0.000144] Initializing cgroup subsys memory
[ 0.000149] Initializing cgroup subsys devices
[ 0.000150] Initializing cgroup subsys freezer
[ 0.000151] Initializing cgroup subsys net_cls
[ 0.000152] Initializing cgroup subsys blkio
[ 0.000153] Initializing cgroup subsys perf_event
[ 0.000170] CPU: Physical Processor ID: 0
[ 0.000171] CPU: Processor Core ID: 0
[ 0.000174] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000174] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000177] mce: CPU supports 9 MCE banks
[ 0.000186] CPU0: Thermal monitoring enabled (TM1)
[ 0.000191] process: using mwait in idle threads
[ 0.000195] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.000195] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.000195] tlb_flushall_shift: 5
[ 0.000268] Freeing SMP alternatives: 8k freed
[ 0.000541] ACPI: Core revision 20120913
[ 0.010514] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.010905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050550] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.156868] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.156873] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.156874] ... version: 3
[ 0.156875] ... bit width: 48
[ 0.156875] ... generic registers: 8
[ 0.156876] ... value mask: 0000ffffffffffff
[ 0.156877] ... max period: 000000007fffffff
[ 0.156878] ... fixed-purpose events: 3
[ 0.156879] ... event mask: 00000007000000ff
[ 0.157027] CPU 1 irqstacks, hard=f20c8000 soft=f20ca000
[ 0.167298] Initializing CPU#1
[ 0.170184] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.157028] smpboot: Booting Node 0, Processors #1
[ 0.170249] CPU 2 irqstacks, hard=f213a000 soft=f213c000
[ 0.180465] Initializing CPU#2
[ 0.170250] #2
[ 0.183434] CPU 3 irqstacks, hard=f218c000 soft=f218e000
[ 0.183436] #3 OK
[ 0.193644] Initializing CPU#3
[ 0.196553] Brought up 4 CPUs
[ 0.196555] smpboot: Total of 4 processors activated (26486.14 BogoMIPS)
[ 0.199139] devtmpfs: initialized
[ 0.199273] PM: Registering ACPI NVS region [mem 0xdf141000-0xdf388fff] (2392064 bytes)
[ 0.199315] PM: Registering ACPI NVS region [mem 0xdf396000-0xdf3c0fff] (176128 bytes)
[ 0.199319] PM: Registering ACPI NVS region [mem 0xdf3c6000-0xdf408fff] (274432 bytes)
[ 0.199402] regulator-dummy: no parameters
[ 0.199441] NET: Registered protocol family 16
[ 0.199518] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.199519] ACPI: bus type pci registered
[ 0.199560] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.199562] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.199563] PCI: Using MMCONFIG for extended config space
[ 0.199564] PCI: Using configuration type 1 for base access
[ 0.199941] bio: create slab <bio-0> at 0
[ 0.199983] ACPI: Added _OSI(Module Device)
[ 0.199984] ACPI: Added _OSI(Processor Device)
[ 0.199986] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.199987] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200951] ACPI: EC: Look up EC in DSDT
[ 0.201874] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204335] ACPI: SSDT df0ee018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.204587] ACPI: Dynamic OEM Table Load:
[ 0.204589] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.204791] ACPI: SSDT df0efa98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.205066] ACPI: Dynamic OEM Table Load:
[ 0.205068] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.214222] ACPI: SSDT df0f0c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.214465] ACPI: Dynamic OEM Table Load:
[ 0.214466] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.230545] ACPI: Interpreter enabled
[ 0.230554] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.230569] ACPI: Using IOAPIC for interrupt routing
[ 0.234407] ACPI: Power Resource [FN00] (off)
[ 0.234460] ACPI: Power Resource [FN01] (off)
[ 0.234512] ACPI: Power Resource [FN02] (off)
[ 0.234562] ACPI: Power Resource [FN03] (off)
[ 0.234614] ACPI: Power Resource [FN04] (off)
[ 0.234820] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.234947] ACPI: No dock devices found.
[ 0.234951] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.235214] \_SB_.PCI0:_OSC invalid UUID
[ 0.235215] _OSC request data:1 8 1f
[ 0.235218] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.235554] PCI host bridge to bus 0000:00
[ 0.235556] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.235558] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.235560] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.235562] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.235563] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.235565] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.235566] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.235568] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.235569] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.235571] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.235572] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.235579] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.235606] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.235629] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.235667] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.235688] pci 0000:00:16.0: reg 10: [mem 0xf740b000-0xf740b00f 64bit]
[ 0.235758] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.235788] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.235807] pci 0000:00:1a.0: reg 10: [mem 0xf7408000-0xf74083ff]
[ 0.235891] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.235915] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.235928] pci 0000:00:1b.0: reg 10: [mem 0xf7400000-0xf7403fff 64bit]
[ 0.235991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.236016] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.236142] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.236176] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.236249] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.236271] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.236343] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.236366] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.236439] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.236461] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.236533] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.236559] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.236578] pci 0000:00:1d.0: reg 10: [mem 0xf7407000-0xf74073ff]
[ 0.236661] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.236684] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.236799] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.236815] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.236822] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.236829] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.236835] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.236842] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.236849] pci 0000:00:1f.2: reg 24: [mem 0xf7406000-0xf74067ff]
[ 0.236889] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.236904] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.236918] pci 0000:00:1f.3: reg 10: [mem 0xf7405000-0xf74050ff 64bit]
[ 0.236936] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.236982] pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
[ 0.236990] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.236999] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.237007] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.237013] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.237019] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.237064] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.237071] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[ 0.246089] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246093] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.246097] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.246103] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.246182] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.246250] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[ 0.246363] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.246367] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.246370] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.246375] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246377] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246378] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246380] pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.246382] pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.246383] pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.246384] pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.246386] pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.246388] pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.246389] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 0.246451] pci 0000:04:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.246482] pci 0000:04:03.0: reg 10: [mem 0xf7300000-0xf73007ff]
[ 0.246498] pci 0000:04:03.0: reg 14: [io 0xd000-0xd07f]
[ 0.246626] pci 0000:04:03.0: supports D2
[ 0.246628] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[ 0.246705] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.246714] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.246719] pci 0000:03:00.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.246728] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 0.246730] pci 0000:03:00.0: bridge window [mem 0xf7300000-0xf73fffff] (subtractive decode)
[ 0.246732] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.246733] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.246735] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246736] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246738] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246739] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.246741] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.246742] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.246744] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.246745] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.246747] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.246749] pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 0.246820] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.246839] pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.246872] pci 0000:05:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.246892] pci 0000:05:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.246980] pci 0000:05:00.0: supports D1 D2
[ 0.246981] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254082] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.254087] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.254098] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.254177] pci 0000:06:00.0: [1b4b:9120] type 00 class 0x010601
[ 0.254194] pci 0000:06:00.0: reg 10: [io 0xb090-0xb097]
[ 0.254205] pci 0000:06:00.0: reg 14: [io 0xb080-0xb083]
[ 0.254217] pci 0000:06:00.0: reg 18: [io 0xb070-0xb077]
[ 0.254229] pci 0000:06:00.0: reg 1c: [io 0xb060-0xb063]
[ 0.254241] pci 0000:06:00.0: reg 20: [io 0xb050-0xb05f]
[ 0.254252] pci 0000:06:00.0: reg 24: [mem 0xf7215000-0xf72157ff]
[ 0.254264] pci 0000:06:00.0: reg 30: [mem 0xf7200000-0xf720ffff pref]
[ 0.254321] pci 0000:06:00.0: PME# supported from D3hot
[ 0.254359] pci 0000:06:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.254376] pci 0000:06:00.1: reg 10: [io 0xb040-0xb047]
[ 0.254387] pci 0000:06:00.1: reg 14: [io 0xb030-0xb033]
[ 0.254399] pci 0000:06:00.1: reg 18: [io 0xb020-0xb027]
[ 0.254411] pci 0000:06:00.1: reg 1c: [io 0xb010-0xb013]
[ 0.254423] pci 0000:06:00.1: reg 20: [io 0xb000-0xb00f]
[ 0.254435] pci 0000:06:00.1: reg 24: [mem 0xf7214000-0xf721400f]
[ 0.254447] pci 0000:06:00.1: reg 30: [mem 0xf7210000-0xf7213fff pref]
[ 0.254504] pci 0000:06:00.1: PME# supported from D3hot
[ 0.262073] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.262078] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.262084] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.262175] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.262203] pci 0000:07:00.0: reg 10: [mem 0xf7100000-0xf7107fff 64bit]
[ 0.262347] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.270065] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.270072] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.270110] pci_bus 0000:00: on NUMA node 0
[ 0.270114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.270251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.270283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.270312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.270340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 0.270368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.270400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.270425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05.PXSX._PRT]
[ 0.270529] \_SB_.PCI0:_OSC invalid UUID
[ 0.270530] _OSC request data:1 1f 1f
[ 0.270532] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.270533] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.273410] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.273444] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.273474] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.273504] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.273534] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.273565] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.273595] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.273625] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.273677] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.273679] vgaarb: loaded
[ 0.273680] vgaarb: bridge control possible 0000:01:00.0
[ 0.273704] PCI: Using ACPI for IRQ routing
[ 0.273705] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.275085] PCI: pci_cache_line_size set to 64 bytes
[ 0.275148] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.275150] e820: reserve RAM buffer [mem 0xde94c000-0xdfffffff]
[ 0.275151] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.275152] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.275232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.275236] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.277242] Switching to clocksource hpet
[ 0.278272] pnp: PnP ACPI init
[ 0.278279] ACPI: bus type pnp registered
[ 0.278456] pnp 00:00: [bus 00-3e]
[ 0.278458] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.278459] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.278461] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.278462] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.278464] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.278465] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.278467] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.278468] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.278469] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.278471] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.278472] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.278474] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.278475] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.278476] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.278478] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.278479] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.278480] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.278482] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 0.278483] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.278503] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.278516] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.278534] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.278536] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.278544] pnp 00:02: [io 0x0000-0x001f]
[ 0.278545] pnp 00:02: [io 0x0081-0x0091]
[ 0.278546] pnp 00:02: [io 0x0093-0x009f]
[ 0.278547] pnp 00:02: [io 0x00c0-0x00df]
[ 0.278549] pnp 00:02: [dma 4]
[ 0.278561] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.278566] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.278577] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.278622] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.278634] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.278642] pnp 00:05: [io 0x002e-0x002f]
[ 0.278643] pnp 00:05: [io 0x004e-0x004f]
[ 0.278645] pnp 00:05: [io 0x0061]
[ 0.278646] pnp 00:05: [io 0x0063]
[ 0.278647] pnp 00:05: [io 0x0065]
[ 0.278648] pnp 00:05: [io 0x0067]
[ 0.278649] pnp 00:05: [io 0x0070]
[ 0.278650] pnp 00:05: [io 0x0080]
[ 0.278652] pnp 00:05: [io 0x0092]
[ 0.278653] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.278654] pnp 00:05: [io 0x0680-0x069f]
[ 0.278655] pnp 00:05: [io 0x0200-0x020f]
[ 0.278657] pnp 00:05: [io 0xffff]
[ 0.278658] pnp 00:05: [io 0xffff]
[ 0.278659] pnp 00:05: [io 0x0400-0x0453]
[ 0.278660] pnp 00:05: [io 0x0458-0x047f]
[ 0.278661] pnp 00:05: [io 0x0500-0x057f]
[ 0.278663] pnp 00:05: [io 0x164e-0x164f]
[ 0.278690] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.278692] system 00:05: [io 0x0200-0x020f] has been reserved
[ 0.278694] system 00:05: [io 0xffff] has been reserved
[ 0.278695] system 00:05: [io 0xffff] has been reserved
[ 0.278697] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.278698] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.278700] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.278702] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.278704] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278709] pnp 00:06: [io 0x0070-0x0077]
[ 0.278713] pnp 00:06: [irq 8]
[ 0.278724] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278741] pnp 00:07: [io 0x0454-0x0457]
[ 0.278758] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.278760] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.278800] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.278801] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.278802] pnp 00:08: [io 0x0290-0x029f]
[ 0.278804] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.278823] system 00:08: [io 0x0290-0x029f] has been reserved
[ 0.278825] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278839] pnp 00:09: [io 0x0010-0x001f]
[ 0.278840] pnp 00:09: [io 0x0022-0x003f]
[ 0.278841] pnp 00:09: [io 0x0044-0x005f]
[ 0.278843] pnp 00:09: [io 0x0062-0x0063]
[ 0.278844] pnp 00:09: [io 0x0065-0x006f]
[ 0.278845] pnp 00:09: [io 0x0072-0x007f]
[ 0.278846] pnp 00:09: [io 0x0080]
[ 0.278847] pnp 00:09: [io 0x0084-0x0086]
[ 0.278848] pnp 00:09: [io 0x0088]
[ 0.278850] pnp 00:09: [io 0x008c-0x008e]
[ 0.278851] pnp 00:09: [io 0x0090-0x009f]
[ 0.278852] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.278853] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.278854] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.278880] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.278881] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278887] pnp 00:0a: [io 0x00f0-0x00ff]
[ 0.278891] pnp 00:0a: [irq 13]
[ 0.278902] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.278915] pnp 00:0b: [io 0x0060]
[ 0.278916] pnp 00:0b: [io 0x0064]
[ 0.278920] pnp 00:0b: [irq 1]
[ 0.278935] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.278956] pnp 00:0c: [irq 12]
[ 0.278971] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.279188] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[ 0.279190] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[ 0.279191] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[ 0.279192] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[ 0.279194] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.279195] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.279196] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[ 0.279198] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.279199] pnp 00:0d: [mem 0xff000000-0xffffffff]
[ 0.279200] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[ 0.279201] pnp 00:0d: [mem 0xe0000000-0xe0000fff]
[ 0.279228] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.279230] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.279232] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.279233] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.279235] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.279237] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.279238] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.279240] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.279242] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[ 0.279243] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.279245] system 00:0d: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.279247] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279334] pnp: PnP ACPI: found 14 devices
[ 0.279336] ACPI: ACPI bus type pnp unregistered
[ 0.279337] PnPBIOS: Disabled by ACPI PNP
[ 0.315009] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.315012] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.315014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.315055] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.315057] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.315058] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.315062] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
[ 0.315066] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
[ 0.315068] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.315070] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.315072] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.315074] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.315076] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.315079] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.315082] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.315088] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe02fffff]
[ 0.315093] pci 0000:00:1c.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
[ 0.315100] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.315104] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.315111] pci 0000:03:00.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.315124] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.315126] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.315130] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.315138] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.315140] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.315146] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.315151] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.315154] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.315158] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.315165] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.315169] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.315193] pci 0000:03:00.0: setting latency timer to 64
[ 0.315206] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.315208] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.315209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315210] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.315212] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.315213] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.315214] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.315216] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.315217] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.315219] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.315220] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.315221] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.315223] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.315224] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.315226] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
[ 0.315227] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
[ 0.315228] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.315230] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.315231] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.315233] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.315234] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315235] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.315237] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.315238] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.315239] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.315241] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.315242] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.315243] pci_bus 0000:03: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.315245] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.315246] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.315248] pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
[ 0.315249] pci_bus 0000:04: resource 5 [mem 0xf7300000-0xf73fffff]
[ 0.315250] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.315252] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.315253] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.315254] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.315256] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.315257] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.315258] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.315260] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.315261] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.315263] pci_bus 0000:04: resource 17 [mem 0xe0000000-0xfeafffff]
[ 0.315264] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.315265] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.315267] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
[ 0.315268] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.315270] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.315305] NET: Registered protocol family 2
[ 0.315410] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.315547] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.315612] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.315619] TCP: reno registered
[ 0.315621] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.315624] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.315667] NET: Registered protocol family 1
[ 0.565014] pci 0000:01:00.0: Boot video device
[ 0.565081] PCI: CLS 64 bytes, default 64
[ 0.565104] Unpacking initramfs...
[ 0.747571] Freeing initrd memory: 10848k freed
[ 0.748819] audit: initializing netlink socket (disabled)
[ 0.748828] type=2000 audit(1361141296.644:1): initialized
[ 0.759014] bounce pool size: 64 pages
[ 0.759018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.759482] VFS: Disk quotas dquot_6.5.2
[ 0.759501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.759553] msgmni has been set to 1630
[ 0.759691] alg: No test for stdrng (krng)
[ 0.759706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.759721] io scheduler noop registered
[ 0.759722] io scheduler deadline registered
[ 0.759733] io scheduler cfq registered (default)
[ 0.759796] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.759999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.760009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.760010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.760250] intel_idle: MWAIT substates: 0x1120
[ 0.760251] intel_idle: v0.4 model 0x2A
[ 0.760252] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.760273] GHES: HEST is not enabled!
[ 0.760280] isapnp: Scanning for PnP cards...
[ 1.114644] isapnp: No Plug & Play device found
[ 1.114677] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.115048] Linux agpgart interface v0.103
[ 1.115162] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.117659] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.117663] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.117749] mousedev: PS/2 mouse device common for all mice
[ 1.117780] rtc_cmos 00:06: RTC can wake from S4
[ 1.117890] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.117914] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.117964] cpuidle: using governor ladder
[ 1.118024] cpuidle: using governor menu
[ 1.118036] drop_monitor: Initializing network drop monitor service
[ 1.118088] TCP: cubic registered
[ 1.118177] NET: Registered protocol family 10
[ 1.118399] mip6: Mobile IPv6
[ 1.118400] NET: Registered protocol family 17
[ 1.118552] Using IPI No-Shortcut mode
[ 1.118692] PM: Hibernation image not present or could not be loaded.
[ 1.118697] registered taskstats version 1
[ 1.119450] rtc_cmos 00:06: setting system clock to 2013-02-17 22:48:17 UTC (1361141297)
[ 1.119593] Freeing unused kernel memory: 432k freed
[ 1.119727] Write protecting the kernel text: 3004k
[ 1.119779] Write protecting the kernel read-only data: 1192k
[ 1.119780] NX-protecting the kernel data: 3140k
[ 1.127162] udevd[67]: starting version 175
[ 1.136820] ACPI: bus type usb registered
[ 1.136839] usbcore: registered new interface driver usbfs
[ 1.136846] usbcore: registered new interface driver hub
[ 1.141309] SCSI subsystem initialized
[ 1.141904] ACPI: bus type scsi registered
[ 1.141981] usbcore: registered new device driver usb
[ 1.142186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.142215] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.142218] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.142222] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.142233] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.143556] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[ 1.143576] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[ 1.144047] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 1.144052] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
[ 1.144062] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[ 1.144289] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 1.144332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.144567] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
[ 1.144582] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[ 1.144809] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[ 1.144814] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
[ 1.144828] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[ 1.145053] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[ 1.145056] perf_event_intel: PEBS enabled due to microcode update
[ 1.145075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.145084] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.145284] r8169 0000:05:00.0: irq 41 for MSI/MSI-X
[ 1.145410] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xf8254000, 14:da:e9:f4:95:ca, XID 0c200000 IRQ 41
[ 1.145412] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.146113] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.146602] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.146607] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[ 1.148464] libata version 3.00 loaded.
[ 1.155880] scsi0 : pata_marvell
[ 1.156259] xhci_hcd 0000:07:00.0: irq 19, io mem 0xf7100000
[ 1.156316] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[ 1.156320] xhci_hcd 0000:07:00.0: irq 43 for MSI/MSI-X
[ 1.156323] xhci_hcd 0000:07:00.0: irq 44 for MSI/MSI-X
[ 1.156327] xhci_hcd 0000:07:00.0: irq 45 for MSI/MSI-X
[ 1.156330] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X
[ 1.156435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.156437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156438] usb usb2: Product: xHCI Host Controller
[ 1.156439] usb usb2: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 1.156440] usb usb2: SerialNumber: 0000:07:00.0
[ 1.157203] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7408000
[ 1.159188] xHCI xhci_add_endpoint called for root hub
[ 1.159191] xHCI xhci_check_bandwidth called for root hub
[ 1.159213] hub 2-0:1.0: USB hub found
[ 1.159221] hub 2-0:1.0: 2 ports detected
[ 1.159284] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.159287] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[ 1.159316] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.159318] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.159319] usb usb3: Product: xHCI Host Controller
[ 1.159321] usb usb3: Manufacturer: Linux 3.7-trunk-686-pae xhci_hcd
[ 1.159322] usb usb3: SerialNumber: 0000:07:00.0
[ 1.159367] xHCI xhci_add_endpoint called for root hub
[ 1.159368] xHCI xhci_check_bandwidth called for root hub
[ 1.159385] hub 3-0:1.0: USB hub found
[ 1.159391] hub 3-0:1.0: 2 ports detected
[ 1.160059] scsi1 : pata_marvell
[ 1.160095] ata1: PATA max UDMA/100 cmd 0xb040 ctl 0xb030 bmdma 0xb000 irq 19
[ 1.160097] ata2: PATA max UDMA/133 cmd 0xb020 ctl 0xb010 bmdma 0xb008 irq 19
[ 1.162320] ACPI: Fan [FAN0] (off)
[ 1.162347] ACPI: Fan [FAN1] (off)
[ 1.162370] ACPI: Fan [FAN2] (off)
[ 1.162394] ACPI: Fan [FAN3] (off)
[ 1.162418] ACPI: Fan [FAN4] (off)
[ 1.168492] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.168519] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.168523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168526] usb usb1: Product: EHCI Host Controller
[ 1.168529] usb usb1: Manufacturer: Linux 3.7-trunk-686-pae ehci_hcd
[ 1.168531] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.168798] hub 1-0:1.0: USB hub found
[ 1.168802] hub 1-0:1.0: 2 ports detected
[ 1.169057] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.169059] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.169100] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.169103] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.169106] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.169118] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.169175] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.169176] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.173003] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.173008] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7407000
[ 1.184410] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.184432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.184435] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.184437] usb usb4: Product: EHCI Host Controller
[ 1.184440] usb usb4: Manufacturer: Linux 3.7-trunk-686-pae ehci_hcd
[ 1.184443] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.184585] hub 4-0:1.0: USB hub found
[ 1.184589] hub 4-0:1.0: 2 ports detected
[ 1.184718] ahci 0000:00:1f.2: version 3.0
[ 1.184754] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 1.200449] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.200456] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.200461] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.216847] scsi2 : ahci
[ 1.216978] scsi3 : ahci
[ 1.217107] scsi4 : ahci
[ 1.217261] scsi5 : ahci
[ 1.217405] scsi6 : ahci
[ 1.217521] scsi7 : ahci
[ 1.217560] ata3: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406100 irq 47
[ 1.217562] ata4: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406180 irq 47
[ 1.217564] ata5: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406200 irq 47
[ 1.217565] ata6: DUMMY
[ 1.217566] ata7: DUMMY
[ 1.217566] ata8: DUMMY
[ 1.217643] ahci 0000:06:00.0: irq 48 for MSI/MSI-X
[ 1.217717] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.217719] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.217958] scsi8 : ahci
[ 1.218036] scsi9 : ahci
[ 1.218079] ata9: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 48
[ 1.218082] ata10: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 48
[ 1.480143] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.536150] ata10: SATA link down (SStatus 0 SControl 330)
[ 1.536156] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.536210] ata9: SATA link down (SStatus 0 SControl 330)
[ 1.536213] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.536244] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.536518] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.536522] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node f2054368), AE_NOT_FOUND (20120913/psparse-536)
[ 1.536640] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.536645] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node f20542d8), AE_NOT_FOUND (20120913/psparse-536)
[ 1.536652] ata5.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.10, max UDMA/100
[ 1.536709] ata3.00: ATA-9: C300-CTFDDAC064MAG, 0007, max UDMA/100
[ 1.536712] ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.537160] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.537164] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node f2054368), AE_NOT_FOUND (20120913/psparse-536)
[ 1.537280] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.537284] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f2054320), AE_NOT_FOUND (20120913/psparse-536)
[ 1.537366] ata3.00: configured for UDMA/100
[ 1.537494] scsi 2:0:0:0: Direct-Access ATA C300-CTFDDAC064M 0007 PQ: 0 ANSI: 5
[ 1.538118] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.538122] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node f20542d8), AE_NOT_FOUND (20120913/psparse-536)
[ 1.538131] ata5.00: configured for UDMA/100
[ 1.538166] ata4.00: ATA-8: ST31000528AS, CC49, max UDMA/133
[ 1.538168] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.538306] ACPI: Invalid Power Resource to register!
[ 1.539459] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[ 1.539464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f2054320), AE_NOT_FOUND (20120913/psparse-536)
[ 1.539634] ata4.00: configured for UDMA/133
[ 1.539802] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC49 PQ: 0 ANSI: 5
[ 1.541040] scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.10 PQ: 0 ANSI: 5
[ 1.540027] ACPI: Invalid Power Resource to register!
[ 1.541283] ACPI: Invalid Power Resource to register!<5>[ 1.545144] sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.545193] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.545213] sd 2:0:0:0: [sda] Write Protect is off
[ 1.545216] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.545234] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.545236] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.545237] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.545288] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.545512] sda: sda1 sda2 sda3
[ 1.545721] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.548040] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.548044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.548180] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.563414] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.563918] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.565023] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.565088] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.565120] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.604073] firewire_ohci 0000:04:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.612442] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.612447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.612726] hub 1-1:1.0: USB hub found
[ 1.612813] hub 1-1:1.0: 6 ports detected
[ 1.723906] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.743889] tsc: Refined TSC clocksource calibration: 3310.799 MHz
[ 1.743895] Switching to clocksource tsc
[ 1.856095] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.856098] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.856369] hub 4-1:1.0: USB hub found
[ 1.856452] hub 4-1:1.0: 8 ports detected
[ 1.969687] device-mapper: uevent: version 1.0.3
[ 1.969748] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 2.062975] PM: Starting manual resume from disk
[ 2.062977] PM: Hibernation image partition 8:17 present
[ 2.062978] PM: Looking for hibernation image.
[ 2.087443] PM: Image not found (code -22)
[ 2.087447] PM: Hibernation image not present or could not be loaded.
[ 2.093071] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.103586] firewire_core 0000:04:03.0: created device fw0: GUID 001e8c00004d7a32, S400
[ 2.127592] usb 4-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.221859] usb 4-1.1: New USB device found, idVendor=03f0, idProduct=6104
[ 2.221862] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.221863] usb 4-1.1: Product: deskjet 5600
[ 2.221865] usb 4-1.1: Manufacturer: hp
[ 2.221866] usb 4-1.1: SerialNumber: MY35M1P4DK89
[ 2.246005] udevd[414]: starting version 175
[ 2.291419] usb 4-1.3: new low-speed USB device number 4 using ehci_hcd
[ 2.295194] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.295199] ACPI: Power Button [PWRB]
[ 2.295237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.295239] ACPI: Power Button [PWRF]
[ 2.295504] ACPI: Requesting acpi_cpufreq
[ 2.303062] mei 0000:00:16.0: setting latency timer to 64
[ 2.303119] mei 0000:00:16.0: irq 49 for MSI/MSI-X
[ 2.304290] wmi: Mapper loaded
[ 2.315019] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[ 2.315024] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.315027] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.315030] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20120913/utaddress-251)
[ 2.315032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.315033] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.315035] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20120913/utaddress-251)
[ 2.315038] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.315039] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.315041] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20120913/utaddress-251)
[ 2.315043] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_GPE.GPIO 3 (20120913/utaddress-251)
[ 2.315045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.315046] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.319855] mei 0000:00:16.0: wd: failed to find the client
[ 2.332283] ACPI Warning: 0x0000f000-0x0000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[ 2.332289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.334900] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.338623] usblp 4-1.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6104
[ 2.338636] usbcore: registered new interface driver usblp
[ 2.347213] iTCO_vendor_support: vendor-support=0
[ 2.347855] nvidia: module license 'NVIDIA' taints kernel.
[ 2.347857] Disabling lock debugging due to kernel taint
[ 2.347999] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.348022] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.348123] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.349293] asus_wmi: ASUS WMI generic driver loaded
[ 2.350118] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
[ 2.350168] asus_wmi: SFUN value: 0x0<6>[ 2.350407] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[ 2.350936] asus_wmi: Disabling ACPI video driver
[ 2.353142] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.353191] NVRM: loading NVIDIA UNIX x86 Kernel Module 313.18 Wed Jan 9 16:31:26 PST 2013
[ 2.353346] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 2.387709] usb 4-1.3: New USB device found, idVendor=056a, idProduct=0011
[ 2.387731] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.387734] usb 4-1.3: Product: ET-0405A-UV2.0-3
[ 2.387737] usb 4-1.3: Manufacturer: WACOM
[ 2.394250] input: Wacom Graphire2 4x5 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input5
[ 2.395455] usbcore: registered new interface driver wacom
[ 2.398031] usbcore: registered new interface driver usbhid
[ 2.398033] usbhid: USB HID core driver
[ 2.399499] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.399546] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.399583] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.399623] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.399659] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.399701] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.399750] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.399794] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.401173] hda_intel: Disabling MSI
[ 2.401182] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.459266] usb 4-1.4: new high-speed USB device number 5 using ehci_hcd
[ 2.554243] usb 4-1.4: New USB device found, idVendor=04b8, idProduct=0116
[ 2.554248] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.554252] usb 4-1.4: Product: EPSON Scanner
[ 2.554254] usb 4-1.4: Manufacturer: EPSON
[ 2.559876] WARNING! power/level is deprecated; use power/control instead
[ 2.585904] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 63
[ 2.623249] usb 4-1.5: new high-speed USB device number 6 using ehci_hcd
[ 2.715438] usb 4-1.5: New USB device found, idVendor=0424, idProduct=2514
[ 2.715443] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.715726] hub 4-1.5:1.0: USB hub found
[ 2.715808] hub 4-1.5:1.0: 3 ports detected
[ 2.787134] usb 4-1.6: new high-speed USB device number 7 using ehci_hcd
[ 2.883935] usb 4-1.6: New USB device found, idVendor=11b0, idProduct=6148
[ 2.883941] usb 4-1.6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 2.883944] usb 4-1.6: Product: FCR-HS219/1 Mobile Reader
[ 2.883947] usb 4-1.6: Manufacturer: Kingston
[ 2.883949] usb 4-1.6: SerialNumber: 110502001057
[ 2.891559] Initializing USB Mass Storage driver...
[ 2.891750] scsi10 : usb-storage 4-1.6:1.0
[ 2.891832] usbcore: registered new interface driver usb-storage
[ 2.891834] USB Mass Storage support registered.
[ 2.986946] usb 4-1.5.1: new high-speed USB device number 8 using ehci_hcd
[ 3.079087] usb 4-1.5.1: New USB device found, idVendor=0424, idProduct=2640
[ 3.079093] usb 4-1.5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.079384] hub 4-1.5.1:1.0: USB hub found
[ 3.079431] hub 4-1.5.1:1.0: 3 ports detected
[ 3.140584] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input14
[ 3.166735] usb 4-1.5.3: new high-speed USB device number 9 using ehci_hcd
[ 3.306791] usb 4-1.5.3: New USB device found, idVendor=0471, idProduct=0331
[ 3.306796] usb 4-1.5.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.306800] usb 4-1.5.3: Product: Philips SPC 1300NC Webcam
[ 3.306802] usb 4-1.5.3: Manufacturer: Philips CE
[ 3.314862] media: Linux media interface: v0.10
[ 3.317162] Linux video capture interface: v2.00
[ 3.344797] 9:3:1: cannot get freq at ep 0x84
[ 3.346011] usbcore: registered new interface driver snd-usb-audio
[ 3.346019] uvcvideo: Found UVC 1.00 device Philips SPC 1300NC Webcam (0471:0331)
[ 3.350476] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 3.350659] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 3.350836] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 3.350984] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 3.352663] input: Philips SPC 1300NC Webcam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.0/input/input19
[ 3.352741] usbcore: registered new interface driver uvcvideo
[ 3.352743] USB Video Class driver (1.1.1)
[ 3.394384] usb 4-1.5.1.1: new high-speed USB device number 10 using ehci_hcd
[ 3.545145] usb 4-1.5.1.1: New USB device found, idVendor=0424, idProduct=4060
[ 3.545151] usb 4-1.5.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.545154] usb 4-1.5.1.1: Product: Ultra Fast Media Reader
[ 3.545156] usb 4-1.5.1.1: Manufacturer: Generic
[ 3.545159] usb 4-1.5.1.1: SerialNumber: F110A600EEDE
[ 3.545592] scsi11 : usb-storage 4-1.5.1.1:1.0
[ 3.626759] Adding 4194300k swap on /dev/sdb1. Priority:-1 extents:1 across:4194300k
[ 3.632369] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.719963] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,discard
[ 3.891616] scsi 10:0:0:0: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
[ 3.892814] scsi 10:0:0:1: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
[ 3.893963] scsi 10:0:0:2: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
[ 3.895230] scsi 10:0:0:3: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
[ 3.896312] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 3.896502] sd 10:0:0:1: Attached scsi generic sg4 type 0
[ 3.896694] sd 10:0:0:2: Attached scsi generic sg5 type 0
[ 3.898339] sd 10:0:0:3: Attached scsi generic sg6 type 0
[ 3.908275] sd 10:0:0:1: [sdd] Attached SCSI removable disk
[ 3.908900] sd 10:0:0:2: [sde] Attached SCSI removable disk
[ 3.909523] sd 10:0:0:3: [sdf] Attached SCSI removable disk
[ 3.912017] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 4.552603] scsi 11:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[ 4.553781] sd 11:0:0:0: Attached scsi generic sg7 type 0
[ 4.569613] sd 11:0:0:0: [sdg] Attached SCSI removable disk
[ 5.381378] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[ 5.424974] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.493192] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.501553] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
[ 5.539930] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.201629] r8169 0000:05:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[ 6.339348] r8169 0000:05:00.0 adsl: link down
[ 6.339358] r8169 0000:05:00.0 adsl: link down
[ 6.339385] IPv6: ADDRCONF(NETDEV_UP): adsl: link is not ready
[ 7.996209] r8169 0000:05:00.0 adsl: link up
[ 7.996218] IPv6: ADDRCONF(NETDEV_CHANGE): adsl: link becomes ready
[ 12.724082] RPC: Registered named UNIX socket transport module.
[ 12.724091] RPC: Registered udp transport module.
[ 12.724092] RPC: Registered tcp transport module.
[ 12.724093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.727227] FS-Cache: Loaded
[ 12.727600] Key type dns_resolver registered
[ 12.730865] FS-Cache: Netfs 'nfs' registered for caching
[ 12.735678] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.299831] fuse init (API version 7.20)
[ 13.305890] ttyS0: LSR safety check engaged!
[ 13.306244] ttyS0: LSR safety check engaged!
[ 13.306668] ttyS1: LSR safety check engaged!
[ 13.307029] ttyS1: LSR safety check engaged!
[ 13.314825] NET: Registered protocol family 15
[ 13.315794] alg: No test for cipher_null (cipher_null-generic)
[ 13.315807] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 13.315819] alg: No test for compress_null (compress_null-generic)
[ 13.315829] alg: No test for digest_null (digest_null-generic)
[ 13.884013] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.904156] NFSD: starting 90-second grace period
[ 14.585528] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input20
[ 14.758199] Bluetooth: Core ver 2.16
[ 14.758209] NET: Registered protocol family 31
[ 14.758210] Bluetooth: HCI device and connection manager initialized
[ 14.758215] Bluetooth: HCI socket layer initialized
[ 14.758217] Bluetooth: L2CAP socket layer initialized
[ 14.758220] Bluetooth: SCO socket layer initialized
[ 14.764994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.764996] Bluetooth: BNEP filters: protocol multicast
[ 14.765002] Bluetooth: BNEP socket layer initialized
[ 14.766090] Bluetooth: RFCOMM TTY layer initialized
[ 14.766097] Bluetooth: RFCOMM socket layer initialized
[ 14.766098] Bluetooth: RFCOMM ver 1.11
[ 15.223387] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.229605] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.540078] lp: driver loaded but no devices found
[ 20.545554] ppdev: user-space parallel port driver
[ 21.257260] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 26.016509] 9:3:1: cannot get freq at ep 0x84
[ 26.038453] 9:3:1: cannot get freq at ep 0x84
[ 26.066549] 9:3:1: cannot get freq at ep 0x84
[ 26.088520] 9:3:1: cannot get freq at ep 0x84
[ 26.113503] 9:3:1: cannot get freq at ep 0x84
[ 26.135648] 9:3:1: cannot get freq at ep 0x84
[ 36.362288] 9:3:1: cannot get freq at ep 0x84
[ 36.384423] 9:3:1: cannot get freq at ep 0x84
[ 36.412379] 9:3:1: cannot get freq at ep 0x84
[ 36.434510] 9:3:1: cannot get freq at ep 0x84
[ 36.460444] 9:3:1: cannot get freq at ep 0x84
[ 36.483423] 9:3:1: cannot get freq at ep 0x84
[ 39.106136] ttyS1: LSR safety check engaged!
[ 39.106176] ttyS0: LSR safety check engaged!
[ 39.106780] ttyS1: LSR safety check engaged!
[ 39.106814] ttyS0: LSR safety check engaged!
[ 39.107291] ttyS1: LSR safety check engaged!
[ 39.107325] ttyS0: LSR safety check engaged!
[ 367.251486] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 367.264314] usb 3-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 367.264901] usb 3-1: New USB device found, idVendor=1058, idProduct=1042
[ 367.264907] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 367.264910] usb 3-1: Product: Elements 1042
[ 367.264913] usb 3-1: Manufacturer: Western Digital
[ 367.264915] usb 3-1: SerialNumber: 57584E314335323238323934
[ 367.266528] scsi12 : usb-storage 3-1:1.0
[ 368.262868] scsi 12:0:0:0: Direct-Access WD Elements 1042 1007 PQ: 0 ANSI: 6
[ 368.264295] sd 12:0:0:0: Attached scsi generic sg8 type 0
[ 368.265998] sd 12:0:0:0: [sdh] Spinning up disk...
[ 369.269021] .......ready
[ 375.286857] sd 12:0:0:0: [sdh] 976769024 512-byte logical blocks: (500 GB/465 GiB)
[ 375.287343] sd 12:0:0:0: [sdh] Write Protect is off
[ 375.287346] sd 12:0:0:0: [sdh] Mode Sense: 47 00 10 08
[ 375.287826] sd 12:0:0:0: [sdh] No Caching mode page present
[ 375.287829] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 375.289364] sd 12:0:0:0: [sdh] No Caching mode page present
[ 375.289367] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 375.295602] sdh: sdh1
[ 375.297167] sd 12:0:0:0: [sdh] No Caching mode page present
[ 375.297171] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 375.297173] sd 12:0:0:0: [sdh] Attached SCSI disk
[ 394.179508] xhci_hcd 0000:07:00.0: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 394.179584] xhci_hcd 0000:07:00.0: WARN Event TRB for slot 1 ep 2 with no TDs queued?
[ 394.179664] xhci_hcd 0000:07:00.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
[ 394.289654] xhci_hcd 0000:07:00.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
[ 414.266556] xhci_hcd 0000:07:00.0: Timeout while waiting for stop endpoint command
[ 414.306605] usb 3-1: USB disconnect, device number 2
[ 414.677659] usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 414.690487] usb 3-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 414.691039] usb 3-1: New USB device found, idVendor=1058, idProduct=1042
[ 414.691043] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 414.691046] usb 3-1: Product: Elements 1042
[ 414.691048] usb 3-1: Manufacturer: Western Digital
[ 414.691051] usb 3-1: SerialNumber: 57584E314335323238323934
[ 414.692715] scsi13 : usb-storage 3-1:1.0
[ 415.689504] scsi 13:0:0:0: Direct-Access WD Elements 1042 1007 PQ: 0 ANSI: 6
[ 415.690836] sd 13:0:0:0: Attached scsi generic sg8 type 0
[ 415.691017] sd 13:0:0:0: [sdh] 976769024 512-byte logical blocks: (500 GB/465 GiB)
[ 415.691486] sd 13:0:0:0: [sdh] Write Protect is off
[ 415.691493] sd 13:0:0:0: [sdh] Mode Sense: 47 00 10 08
[ 415.691939] sd 13:0:0:0: [sdh] No Caching mode page present
[ 415.691943] sd 13:0:0:0: [sdh] Assuming drive cache: write through
[ 415.693336] sd 13:0:0:0: [sdh] No Caching mode page present
[ 415.693341] sd 13:0:0:0: [sdh] Assuming drive cache: write through
[ 422.006845] sdh: sdh1
[ 422.008540] sd 13:0:0:0: [sdh] No Caching mode page present
[ 422.008543] sd 13:0:0:0: [sdh] Assuming drive cache: write through
[ 422.008546] sd 13:0:0:0: [sdh] Attached SCSI disk
Reply to: