Bug#700513: linux-base: Cannot resume after suspending (laptop model HP CQ61 410SH)
Package: linux-base
Version: 3.4~bpo60+1
Severity: normal
After suspending the laptop, and attempting to resume, I get a black screen
with the power and wifi icons turned on. I have tried using different versions
of the Linux Kernel, adding pci=nocrs, acp_osi=Microsoft Windows NT,
acp_osi=Linux, apm=off (since apparently my laptop uses both acpi and apm),
acpi=off, but they have the same effect. Except ACPI=off, if I do that, the
computer does not suspend, it will just act as if it were locked. There is
nothing I can do if the computer is in this state, except press the power
button to shut it off. Once I do that, if I try to turn it back on, it will
not even go into the BIOS. From what I gathered, it is not really turning off
when I do this, but hibernating, and since there is no hibernation image, it
cannot be restored. The only way to get it to turn back on after this is by
removing the battery and pressing the power button for about ten seconds.
My bios is the most current version. This bug was also filed for ubuntu, but
was never solved (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/675076).
This started happening right after I installed debian. The computer was
running windows before and never had an issue.
The logo.txt and logo2.txt are two dmesgs, one after I shut the computer off
with the power button and then removed the battery (logo.txt), and the other
one removing the battery directly.
-- System Information:
Debian Release: 6.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-0.bpo.4-rt-686-pae (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-base depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii libuuid-perl 0.02-4 Perl extension for using UUID inte
ii udev 164-3 /dev/ and hotplug management daemo
ii util-linux 2.17.2-9 Miscellaneous system utilities
linux-base recommends no packages.
linux-base suggests no packages.
-- debconf information:
linux-base/disk-id-update-failed:
linux-base/disk-id-manual:
linux-base/disk-id-convert-plan-no-relabel: true
linux-base/disk-id-manual-boot-loader:
linux-base/disk-id-convert-auto: true
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-0.bpo.4-rt-686-pae (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT RT Debian 3.2.35-2~bpo60+1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae50e000 (usable)
[ 0.000000] BIOS-e820: 00000000ae50e000 - 00000000ae70e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae70e000 - 00000000afd94000 (usable)
[ 0.000000] BIOS-e820: 00000000afd94000 - 00000000afdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afdbf000 - 00000000afe92000 (usable)
[ 0.000000] BIOS-e820: 00000000afe92000 - 00000000afebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afee4000 (usable)
[ 0.000000] BIOS-e820: 00000000afee4000 - 00000000afef7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afef7000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ61 NoteBook PC/363F, BIOS F.15 05/17/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 376b0000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36d70000 - 376af3c7
[ 0.000000] Move RAMDISK from 00000000376b0000 - 0000000037fef3c6 to 36d70000 - 376af3c6
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT afef6120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP afef5000 000F4 (v04 HP 363F 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT afee8000 092FF (v01 HP 363F F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS afe9b000 00040
[ 0.000000] ACPI: HPET afef4000 00038 (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC afef3000 00068 (v02 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG afef2000 0003C (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT afee7000 00028 (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC afee6000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT afee4000 001D5 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1925MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x000aff00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ae50e
[ 0.000000] 0: 0x000ae70e -> 0x000afd94
[ 0.000000] 0: 0x000afdbf -> 0x000afe92
[ 0.000000] 0: 0x000afebf -> 0x000afee4
[ 0.000000] 0: 0x000afef7 -> 0x000aff00
[ 0.000000] On node 0 totalpages: 719908
[ 0.000000] free_area_init_node: node 0, pgdat c141ce00, node_mem_map f5770200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3851 pages used for memmap
[ 0.000000] HighMem zone: 488332 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:47100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 93 pages/cpu @f7928000 s360064 r0 d20864 u380928
[ 0.000000] pcpu-alloc: s360064 r0 d20864 u380928 alloc=93*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714277
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae root=UUID=82ce0c9b-4ca0-4b03-9e98-625df9e4f88a ro apm=off quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000aff00)
[ 0.000000] Memory: 2840376k/2882560k available (2914k kernel code, 39256k reserved, 1326k data, 736k init, 1968732k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1425000 - 0xc14dd000 ( 736 kB)
[ 0.000000] .data : 0xc12d8b05 - 0xc1424400 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d8b05 (2914 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2094.694 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.38 BogoMIPS (lpj=8378776)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004063] Security Framework initialized
[ 0.004067] AppArmor: AppArmor disabled by boot time parameter
[ 0.004088] Mount-cache hash table entries: 512
[ 0.004210] Initializing cgroup subsys cpuacct
[ 0.004215] Initializing cgroup subsys memory
[ 0.004223] Initializing cgroup subsys devices
[ 0.004225] Initializing cgroup subsys freezer
[ 0.004227] Initializing cgroup subsys net_cls
[ 0.004229] Initializing cgroup subsys blkio
[ 0.004235] Initializing cgroup subsys perf_event
[ 0.004264] mce: CPU supports 6 MCE banks
[ 0.004323] SMP alternatives: switching to UP code
[ 0.010719] ACPI: Core revision 20110623
[ 0.016064] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059257] CPU0: AMD Sempron(tm) M120 stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.072067] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.076011] Brought up 1 CPUs
[ 0.076014] Total of 1 processors activated (4189.38 BogoMIPS).
[ 0.076473] devtmpfs: initialized
[ 0.076786] PM: Registering ACPI NVS region at ae50e000 (2097152 bytes)
[ 0.076948] PM: Registering ACPI NVS region at afe92000 (184320 bytes)
[ 0.077188] print_constraints: dummy:
[ 0.077277] NET: Registered protocol family 16
[ 0.077416] node 0 link 0: io port [0, ffffff]
[ 0.077420] TOM: 00000000c0000000 aka 3072M
[ 0.077423] Fam 10h mmconf [mem 0xf7000000-0xf7ffffff]
[ 0.077427] node 0 link 0: mmio [a0000, bffff]
[ 0.077431] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.077435] node 0 link 0: mmio [d0000000, d01fffff]
[ 0.077438] node 0 link 0: mmio [d0200000, d03fffff]
[ 0.077442] node 0 link 0: mmio [d0400000, f6ffffff]
[ 0.077445] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
[ 0.077449] node 0 link 0: mmio [f8000000, ffffffff]
[ 0.077453] bus: [00, 0f] on node 0 link 0
[ 0.077456] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.077458] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.077461] bus: 00 index 2 [mem 0xc0000000-0xf6ffffff]
[ 0.077464] bus: 00 index 3 [mem 0xf8000000-0xfcffffffff]
[ 0.077475] Extended Config Space enabled on 1 nodes
[ 0.077492] ACPI: bus type pci registered
[ 0.077620] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
[ 0.077625] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
[ 0.077627] PCI: Using MMCONFIG for extended config space
[ 0.077630] PCI: Using configuration type 1 for base access
[ 0.078682] bio: create slab <bio-0> at 0
[ 0.078816] ACPI: Added _OSI(Module Device)
[ 0.078820] ACPI: Added _OSI(Processor Device)
[ 0.078823] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.078826] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080376] ACPI: EC: Look up EC in DSDT
[ 0.081991] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.092416] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.096128] ACPI: Interpreter enabled
[ 0.096128] ACPI: (supports S0 S3 S4 S5)
[ 0.096143] ACPI: Using IOAPIC for interrupt routing
[ 0.108850] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.109086] ACPI: No dock devices found.
[ 0.109088] HEST: Table not found.
[ 0.109093] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.110270] \_SB_.PCI0:_OSC request failed
[ 0.110272] _OSC request data:1 8 1f
[ 0.110279] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.112400] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.112403] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.112407] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.112410] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.112413] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.112416] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.112419] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.112422] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.112425] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.112428] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.112431] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.112434] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.112437] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.112440] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.112443] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.112446] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf6ffffff]
[ 0.112449] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.112461] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.112483] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.112543] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[ 0.112625] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.112665] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.112683] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.112725] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.112828] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.112850] pci 0000:00:11.0: reg 10: [io 0x4038-0x403f]
[ 0.112861] pci 0000:00:11.0: reg 14: [io 0x404c-0x404f]
[ 0.112872] pci 0000:00:11.0: reg 18: [io 0x4030-0x4037]
[ 0.112883] pci 0000:00:11.0: reg 1c: [io 0x4048-0x404b]
[ 0.112894] pci 0000:00:11.0: reg 20: [io 0x4010-0x401f]
[ 0.112905] pci 0000:00:11.0: reg 24: [mem 0xd0408000-0xd04083ff]
[ 0.112968] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.112983] pci 0000:00:12.0: reg 10: [mem 0xd0407000-0xd0407fff]
[ 0.113055] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.113070] pci 0000:00:12.1: reg 10: [mem 0xd0406000-0xd0406fff]
[ 0.113147] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.113935] pci 0000:00:12.2: reg 10: [mem 0xd0408500-0xd04085ff]
[ 0.118351] pci 0000:00:12.2: supports D1 D2
[ 0.118354] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.118382] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.118397] pci 0000:00:13.0: reg 10: [mem 0xd0405000-0xd0405fff]
[ 0.118467] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.118482] pci 0000:00:13.1: reg 10: [mem 0xd0404000-0xd0404fff]
[ 0.118560] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.119339] pci 0000:00:13.2: reg 10: [mem 0xd0408400-0xd04084ff]
[ 0.124048] pci 0000:00:13.2: supports D1 D2
[ 0.124050] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.124080] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.124191] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.124215] pci 0000:00:14.2: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[ 0.124286] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.124304] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.124388] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.124439] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.124462] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.124478] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.124497] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.124518] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.124634] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[ 0.124644] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.124650] pci 0000:01:05.0: reg 14: [io 0x3000-0x30ff]
[ 0.124655] pci 0000:01:05.0: reg 18: [mem 0xd0300000-0xd030ffff]
[ 0.124667] pci 0000:01:05.0: reg 24: [mem 0xd0200000-0xd02fffff]
[ 0.124688] pci 0000:01:05.0: supports D1 D2
[ 0.124700] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[ 0.124709] pci 0000:01:05.1: reg 10: [mem 0xd0310000-0xd0313fff]
[ 0.124744] pci 0000:01:05.1: supports D1 D2
[ 0.124819] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.124823] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.124827] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.124832] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.124882] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.124901] pci 0000:02:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.124982] pci 0000:02:00.0: supports D1
[ 0.124984] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.132024] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.132029] pci 0000:00:05.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.132098] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.132113] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.132135] pci 0000:03:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.132150] pci 0000:03:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.132161] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.132212] pci 0000:03:00.0: supports D1 D2
[ 0.132215] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140049] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.140054] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.140060] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.140166] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.140177] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.140181] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.140185] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.140188] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.140192] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.140196] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.140200] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.140203] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.140207] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.140211] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.140215] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.140218] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.140222] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.140226] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.140230] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xf6ffffff] (subtractive decode)
[ 0.140233] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.140282] pci_bus 0000:00: on NUMA node 0
[ 0.140286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.141052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.141165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.141289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.141479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.141803] \_SB_.PCI0:_OSC request failed
[ 0.141805] _OSC request data:1 1f 1f
[ 0.141811] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.141890] \_SB_.PCI0:_OSC request failed
[ 0.141892] _OSC request data:1 0 1d
[ 0.141898] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.141900] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.155130] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155703] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155826] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.155907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.156080] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.156087] vgaarb: loaded
[ 0.156089] vgaarb: bridge control possible 0000:01:05.0
[ 0.156160] PCI: Using ACPI for IRQ routing
[ 0.156591] PCI: pci_cache_line_size set to 64 bytes
[ 0.156718] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.156724] reserve RAM buffer: 00000000ae50e000 - 00000000afffffff
[ 0.156732] reserve RAM buffer: 00000000afd94000 - 00000000afffffff
[ 0.156739] reserve RAM buffer: 00000000afe92000 - 00000000afffffff
[ 0.156744] reserve RAM buffer: 00000000afee4000 - 00000000afffffff
[ 0.156749] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[ 0.156920] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.156926] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.159019] Switching to clocksource hpet
[ 0.159554] pnp: PnP ACPI init
[ 0.159577] ACPI: bus type pnp registered
[ 0.160762] pnp 00:00: [bus 00-ff]
[ 0.160766] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.160769] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.160772] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.160775] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.160778] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.160781] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.160783] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.160786] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.160789] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.160792] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.160795] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.160798] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.160800] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.160803] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.160806] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.160809] pnp 00:00: [mem 0xc0000000-0xf6ffffff window]
[ 0.160812] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.160815] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.160897] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.161438] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.161441] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.161444] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
[ 0.161533] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.161537] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.161541] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
[ 0.161545] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161772] pnp 00:02: [irq 0 disabled]
[ 0.161782] pnp 00:02: [irq 8]
[ 0.161785] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.161827] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.161882] pnp 00:03: [io 0x0000-0x000f]
[ 0.161885] pnp 00:03: [io 0x0081-0x008f]
[ 0.161887] pnp 00:03: [io 0x00c0-0x00df]
[ 0.161890] pnp 00:03: [dma 4]
[ 0.161937] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.161952] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.161957] pnp 00:04: [irq 13]
[ 0.162003] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.162087] pnp 00:05: [io 0x0070-0x0071]
[ 0.162135] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.162150] pnp 00:06: [io 0x0061]
[ 0.162198] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.162217] pnp 00:07: [io 0x0060]
[ 0.162219] pnp 00:07: [io 0x0064]
[ 0.162257] pnp 00:07: [irq 1]
[ 0.162314] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.162365] pnp 00:08: [irq 12]
[ 0.162425] pnp 00:08: Plug and Play ACPI device, IDs SYN1e11 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.162445] pnp 00:09: [io 0x0010-0x001f]
[ 0.162447] pnp 00:09: [io 0x002e-0x002f]
[ 0.162450] pnp 00:09: [io 0x0072-0x0073]
[ 0.162452] pnp 00:09: [io 0x0080]
[ 0.162455] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.162457] pnp 00:09: [io 0x0092]
[ 0.162460] pnp 00:09: [io 0x0400-0x04cf]
[ 0.162465] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.162468] pnp 00:09: [io 0x04d6]
[ 0.162470] pnp 00:09: [io 0x0680-0x06ff]
[ 0.162473] pnp 00:09: [io 0x077a]
[ 0.162475] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.162477] pnp 00:09: [io 0x0c14]
[ 0.162480] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.162482] pnp 00:09: [io 0x0c6c]
[ 0.162485] pnp 00:09: [io 0x0c6f]
[ 0.162487] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.162490] pnp 00:09: [io 0x0380-0x0387]
[ 0.162584] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.162588] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.162592] system 00:09: [io 0x04d6] has been reserved
[ 0.162596] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.162602] system 00:09: [io 0x077a] has been reserved
[ 0.162605] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.162609] system 00:09: [io 0x0c14] has been reserved
[ 0.162612] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.162616] system 00:09: [io 0x0c6c] has been reserved
[ 0.162620] system 00:09: [io 0x0c6f] has been reserved
[ 0.162623] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.162627] system 00:09: [io 0x0380-0x0387] has been reserved
[ 0.162631] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162715] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.162718] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.162823] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.162828] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.162832] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.163479] pnp: PnP ACPI: found 11 devices
[ 0.163481] ACPI: ACPI bus type pnp unregistered
[ 0.163484] PnPBIOS: Disabled by ACPI PNP
[ 0.200891] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.200897] PCI: max bus depth: 1 pci_try_num: 2
[ 0.200926] pci 0000:00:06.0: BAR 14: assigned [mem 0xd0500000-0xd05fffff]
[ 0.200931] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.200934] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.200938] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.200943] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.200948] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.200952] pci 0000:00:05.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.200959] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0020000-0xd002ffff pref]
[ 0.200962] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.200965] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.200969] pci 0000:00:06.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.200973] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.200978] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.201030] pci 0000:00:01.0: setting latency timer to 64
[ 0.201046] pci 0000:00:05.0: setting latency timer to 64
[ 0.201055] pci 0000:00:06.0: setting latency timer to 64
[ 0.201064] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.201067] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.201070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.201073] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.201076] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.201079] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.201082] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.201085] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.201088] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.201091] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.201094] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.201097] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.201100] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.201103] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.201106] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf6ffffff]
[ 0.201109] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xffffffff]
[ 0.201113] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.201116] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd03fffff]
[ 0.201119] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.201122] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.201126] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.201129] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.201132] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.201135] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.201138] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.201141] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.201144] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.201147] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.201150] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.201153] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.201156] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.201159] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.201162] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.201165] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.201168] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.201171] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.201174] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]
[ 0.201178] pci_bus 0000:04: resource 18 [mem 0xc0000000-0xf6ffffff]
[ 0.201181] pci_bus 0000:04: resource 19 [mem 0xf8000000-0xffffffff]
[ 0.201265] NET: Registered protocol family 2
[ 0.201363] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.201812] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.202362] TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
[ 0.203497] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.203500] TCP reno registered
[ 0.203505] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.203530] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.203673] NET: Registered protocol family 1
[ 0.203689] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.116091] pci 0000:01:05.0: Boot video device
[ 1.116108] PCI: CLS 64 bytes, default 64
[ 1.116205] Unpacking initramfs...
[ 1.417977] Freeing initrd memory: 9472k freed
[ 1.421711] Simple Boot Flag at 0x44 set to 0x1
[ 1.421986] IBS: LVT offset 1 assigned
[ 1.422003] perf: AMD IBS detected (0x0000001f)
[ 1.422231] audit: initializing netlink socket (disabled)
[ 1.422252] type=2000 audit(1360769994.420:1): initialized
[ 1.441448] highmem bounce pool size: 64 pages
[ 1.441454] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.441725] VFS: Disk quotas dquot_6.5.2
[ 1.441780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.441873] msgmni has been set to 1720
[ 1.442172] alg: No test for stdrng (krng)
[ 1.442211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.442215] io scheduler noop registered
[ 1.442218] io scheduler deadline registered
[ 1.442240] io scheduler cfq registered (default)
[ 1.442407] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.442439] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.442498] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.442523] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 1.442628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.442667] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.442670] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.443127] ERST: Table is not found!
[ 1.443129] GHES: HEST is not enabled!
[ 1.443147] isapnp: Scanning for PnP cards...
[ 1.827487] isapnp: No Plug & Play device found
[ 1.827564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.872447] Linux agpgart interface v0.103
[ 1.873046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.891055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.891108] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.891262] mousedev: PS/2 mouse device common for all mice
[ 1.892406] rtc_cmos 00:05: RTC can wake from S4
[ 1.892534] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.892584] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.892598] cpuidle: using governor ladder
[ 1.892601] cpuidle: using governor menu
[ 1.893020] TCP cubic registered
[ 1.893080] NET: Registered protocol family 10
[ 1.894119] Mobile IPv6
[ 1.894122] NET: Registered protocol family 17
[ 1.894128] Registering the dns_resolver key type
[ 1.894153] Using IPI No-Shortcut mode
[ 1.894275] PM: Hibernation image not present or could not be loaded.
[ 1.894296] registered taskstats version 1
[ 1.894758] rtc_cmos 00:05: setting system clock to 2013-02-13 15:39:56 UTC (1360769996)
[ 1.894849] Initializing network drop monitor service
[ 1.895045] Freeing unused kernel memory: 736k freed
[ 1.895377] Write protecting the kernel text: 2916k
[ 1.895430] Write protecting the kernel read-only data: 1060k
[ 1.895432] NX-protecting the kernel data: 3228k
[ 1.908556] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.924230] udev[48]: starting version 164
[ 1.995059] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.995103] r8169 0000:03:00.0: setting latency timer to 64
[ 1.995150] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 2.007441] usbcore: registered new interface driver usbfs
[ 2.007474] usbcore: registered new interface driver hub
[ 2.043528] SCSI subsystem initialized
[ 2.064341] [Firmware Bug]: Invalid critical threshold (0)
[ 2.064789] r8169 0000:03:00.0: eth0: RTL8102e at 0xf821e000, 78:ac:c0:4d:b6:ca, XID 04c00000 IRQ 42
[ 2.079910] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.079914] ACPI: Thermal Zone [THRM] (67 C)
[ 2.080177] usbcore: registered new device driver usb
[ 2.080785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.080870] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 2.080875] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.080913] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.080961] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.080996] ehci_hcd 0000:00:12.2: debug port 1
[ 2.113617] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0408500
[ 2.124261] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.124339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.124343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.124346] usb usb1: Product: EHCI Host Controller
[ 2.124348] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ehci_hcd
[ 2.124351] usb usb1: SerialNumber: 0000:00:12.2
[ 2.124524] hub 1-0:1.0: USB hub found
[ 2.124531] hub 1-0:1.0: 6 ports detected
[ 2.124769] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 2.124773] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.124788] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.124797] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.124827] ehci_hcd 0000:00:13.2: debug port 1
[ 2.133675] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0408400
[ 2.134943] libata version 3.00 loaded.
[ 2.144060] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.144134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.144137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.144141] usb usb2: Product: EHCI Host Controller
[ 2.144143] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ehci_hcd
[ 2.144146] usb usb2: SerialNumber: 0000:00:13.2
[ 2.144331] hub 2-0:1.0: USB hub found
[ 2.144338] hub 2-0:1.0: 6 ports detected
[ 2.145031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.145837] ahci 0000:00:11.0: version 3.0
[ 2.145992] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.145997] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.150073] scsi0 : ahci
[ 2.150440] scsi1 : ahci
[ 2.150560] ata1: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408100 irq 22
[ 2.150564] ata2: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408180 irq 22
[ 2.150782] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 2.150786] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.150802] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.151031] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd0407000
[ 2.208079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.208083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208085] usb usb3: Product: OHCI Host Controller
[ 2.208088] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.208090] usb usb3: SerialNumber: 0000:00:12.0
[ 2.208347] hub 3-0:1.0: USB hub found
[ 2.208391] hub 3-0:1.0: 3 ports detected
[ 2.208612] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 2.208616] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.208626] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.208673] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd0406000
[ 2.268079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.268083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268086] usb usb4: Product: OHCI Host Controller
[ 2.268089] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.268091] usb usb4: SerialNumber: 0000:00:12.1
[ 2.268369] hub 4-0:1.0: USB hub found
[ 2.268413] hub 4-0:1.0: 3 ports detected
[ 2.268638] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 2.268641] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.268659] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.268735] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0405000
[ 2.328084] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.328087] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.328090] usb usb5: Product: OHCI Host Controller
[ 2.328092] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.328095] usb usb5: SerialNumber: 0000:00:13.0
[ 2.328342] hub 5-0:1.0: USB hub found
[ 2.328385] hub 5-0:1.0: 3 ports detected
[ 2.328603] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 2.328606] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.328617] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.328667] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0404000
[ 2.388073] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.388077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.388080] usb usb6: Product: OHCI Host Controller
[ 2.388082] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.388085] usb usb6: SerialNumber: 0000:00:13.1
[ 2.388320] hub 6-0:1.0: USB hub found
[ 2.388363] hub 6-0:1.0: 3 ports detected
[ 2.428060] Refined TSC clocksource calibration: 2094.749 MHz.
[ 2.428067] Switching to clocksource tsc
[ 2.436075] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 2.572459] usb 1-3: New USB device found, idVendor=5986, idProduct=0180
[ 2.572463] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.572466] usb 1-3: Product: HP Webcam-101
[ 2.572468] usb 1-3: Manufacturer: Novatek
[ 2.572470] usb 1-3: SerialNumber: 961230000000100
[ 2.640060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.640090] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.642384] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 2.642388] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.644716] ata1.00: configured for UDMA/100
[ 2.644851] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 2.655766] ata2.00: ATAPI: hp DVD RW AD-7561S, AH73, max UDMA/100
[ 2.672464] ata2.00: configured for UDMA/100
[ 2.675497] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7561S AH73 PQ: 0 ANSI: 5
[ 2.685395] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.685464] sd 0:0:0:0: [sda] Write Protect is off
[ 2.685468] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.685498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.691083] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.691089] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.691547] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.743197] sda: sda1 sda2 < sda5 >
[ 2.743702] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.752030] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.752482] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.948021] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[ 2.997778] PM: Starting manual resume from disk
[ 2.997782] PM: Hibernation image partition 8:5 present
[ 2.997785] PM: Looking for hibernation image.
[ 2.998086] PM: Image not found (code -22)
[ 2.998088] PM: Hibernation image not present or could not be loaded.
[ 3.009010] EXT3-fs (sda1): recovery required on readonly filesystem
[ 3.009014] EXT3-fs (sda1): write access will be enabled during recovery
[ 3.121110] usb 6-1: New USB device found, idVendor=03f0, idProduct=231d
[ 3.121114] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.121117] usb 6-1: Product: HP Integrated Module
[ 3.121120] usb 6-1: Manufacturer: Broadcom Corp
[ 3.728469] EXT3-fs (sda1): orphan cleanup on readonly fs
[ 3.728477] ext3_orphan_cleanup: deleting unreferenced inode 7243210
[ 3.728533] ext3_orphan_cleanup: deleting unreferenced inode 7242115
[ 3.728547] EXT3-fs (sda1): 2 orphan inodes deleted
[ 3.728550] EXT3-fs (sda1): recovery complete
[ 3.728555] kjournald starting. Commit interval 5 seconds
[ 3.803649] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 5.185858] udev[319]: starting version 164
[ 5.502151] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.565250] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.565892] ACPI: Power Button [PWRB]
[ 5.565975] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.566025] ACPI: Sleep Button [SLPB]
[ 5.566134] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.593995] ACPI: Lid Switch [LID]
[ 5.594106] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.594236] ACPI: Power Button [PWRF]
[ 5.594940] ACPI: AC Adapter [ACAD] (on-line)
[ 5.603553] acpi device:04: registered as cooling_device0
[ 5.604490] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 5.604628] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.620776] ACPI: Battery Slot [BAT0] (battery present)
[ 5.633554] ACPI: acpi_idle registered with cpuidle
[ 5.659176] cfg80211: Calling CRDA to update world regulatory domain
[ 5.671108] wmi: Mapper loaded
[ 5.697714] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.707985] powernow-k8: Found 1 AMD Sempron(tm) M120 (1 cpu cores) (version 2.20.00)
[ 5.708083] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 5.708086] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 5.708088] powernow-k8: 2 : pstate 2 (800 MHz)
[ 5.739762] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 5.858656] Bluetooth: Core ver 2.16
[ 5.858815] NET: Registered protocol family 31
[ 5.858818] Bluetooth: HCI device and connection manager initialized
[ 5.858823] Bluetooth: HCI socket layer initialized
[ 5.858825] Bluetooth: L2CAP socket layer initialized
[ 5.858839] Bluetooth: SCO socket layer initialized
[ 5.866686] ath9k 0000:02:00.0: setting latency timer to 64
[ 5.880962] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.885440] usbcore: registered new interface driver btusb
[ 5.938577] ath: EEPROM regdomain: 0x6a
[ 5.938580] ath: EEPROM indicates we should expect a direct regpair map
[ 5.938584] ath: Country alpha2 being used: 00
[ 5.938586] ath: Regpair used: 0x6a
[ 5.992712] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.993771] Registered led device: ath9k-phy0
[ 5.993939] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8480000, irq=17
[ 6.237585] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 6.311819] [drm] Initialized drm 1.1.0 20060810
[ 6.368127] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[ 6.387110] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.387575] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.388838] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[ 6.388847] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.390645] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 6.395032] Linux media interface: v0.10
[ 6.423080] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.424680] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 6.465665] Linux video capture interface: v2.00
[ 6.471776] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0180)
[ 6.481239] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input11
[ 6.481605] usbcore: registered new interface driver uvcvideo
[ 6.481608] USB Video Class driver (1.1.1)
[ 6.525736] [drm] radeon kernel modesetting enabled.
[ 6.525817] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 6.525823] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 6.525832] radeon 0000:01:05.0: setting latency timer to 64
[ 6.526970] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x363F).
[ 6.527006] [drm] register mmio base: 0xD0300000
[ 6.527008] [drm] register mmio size: 65536
[ 6.537065] ATOM BIOS: HP_RavLas20
[ 6.537102] radeon 0000:01:05.0: VRAM: 336M 0x00000000C0000000 - 0x00000000D4FFFFFF (336M used)
[ 6.537106] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 6.537252] [drm] Detected VRAM RAM=336M, BAR=256M
[ 6.537256] [drm] RAM width 32bits DDR
[ 6.537328] [TTM] Zone kernel: Available graphics memory: 440926 kiB.
[ 6.537331] [TTM] Zone highmem: Available graphics memory: 1425292 kiB.
[ 6.537334] [TTM] Initializing pool allocator.
[ 6.537370] [drm] radeon: 336M of VRAM memory ready
[ 6.537372] [drm] radeon: 512M of GTT memory ready.
[ 6.537402] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.537405] [drm] Driver supports precise vblank timestamp query.
[ 6.537447] [drm] radeon: irq initialized.
[ 6.537453] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.539039] [drm] Loading RS780 Microcode
[ 6.701917] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 6.781158] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 6.790468] platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[ 6.836505] platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
[ 6.856480] platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[ 6.860904] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 6.861021] radeon 0000:01:05.0: WB enabled
[ 6.893734] [drm] ring test succeeded in 1 usecs
[ 6.893998] [drm] radeon: ib pool ready.
[ 6.894156] [drm] ib test succeeded in 0 usecs
[ 6.895584] [drm] Radeon Display Connectors
[ 6.895587] [drm] Connector 0:
[ 6.895589] [drm] VGA
[ 6.895592] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.895594] [drm] Encoders:
[ 6.895595] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.895598] [drm] Connector 1:
[ 6.895599] [drm] LVDS
[ 6.895602] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.895604] [drm] Encoders:
[ 6.895606] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 6.895608] [drm] Connector 2:
[ 6.895609] [drm] HDMI-A
[ 6.895611] [drm] HPD1
[ 6.895613] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 6.895615] [drm] Encoders:
[ 6.895617] [drm] DFP1: INTERNAL_UNIPHY
[ 6.895712] [drm] radeon: power management initialized
[ 7.754960] [drm] fb mappable at 0xC0142000
[ 7.754963] [drm] vram apper at 0xC0000000
[ 7.754966] [drm] size 4325376
[ 7.754968] [drm] fb depth is 24
[ 7.754970] [drm] pitch is 5632
[ 7.755121] fbcon: radeondrmfb (fb0) is primary device
[ 7.833742] Console: switching to colour frame buffer device 170x48
[ 7.844920] fb0: radeondrmfb frame buffer device
[ 7.844922] drm: registered panic notifier
[ 7.844929] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 12.486237] Adding 5569532k swap on /dev/sda5. Priority:-1 extents:1 across:5569532k
[ 12.633952] EXT3-fs (sda1): using internal journal
[ 12.711852] loop: module loaded
[ 13.731583] fuse init (API version 7.17)
[ 14.494047] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.828334] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 16.083490] r8169 0000:03:00.0: eth0: link down
[ 16.083656] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.575363] apm: BIOS not found.
[ 18.815665] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.815674] Bluetooth: BNEP filters: protocol multicast
[ 18.816589] Bluetooth: RFCOMM TTY layer initialized
[ 18.816606] Bluetooth: RFCOMM socket layer initialized
[ 18.816612] Bluetooth: RFCOMM ver 1.11
[ 19.027813] Bridge firewalling registered
[ 19.832640] lp: driver loaded but no devices found
[ 19.842173] ppdev: user-space parallel port driver
[ 22.496755] sshd (1767): /proc/1767/oom_adj is deprecated, please use /proc/1767/oom_score_adj instead.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-0.bpo.4-rt-686-pae (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT RT Debian 3.2.35-2~bpo60+1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae50e000 (usable)
[ 0.000000] BIOS-e820: 00000000ae50e000 - 00000000ae70e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae70e000 - 00000000afd94000 (usable)
[ 0.000000] BIOS-e820: 00000000afd94000 - 00000000afdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afdbf000 - 00000000afe92000 (usable)
[ 0.000000] BIOS-e820: 00000000afe92000 - 00000000afebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afee4000 (usable)
[ 0.000000] BIOS-e820: 00000000afee4000 - 00000000afef7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afef7000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ61 NoteBook PC/363F, BIOS F.15 05/17/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 376b0000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36d70000 - 376af3c7
[ 0.000000] Move RAMDISK from 00000000376b0000 - 0000000037fef3c6 to 36d70000 - 376af3c6
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT afef6120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP afef5000 000F4 (v04 HP 363F 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT afee8000 092FF (v01 HP 363F F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS afe9b000 00040
[ 0.000000] ACPI: HPET afef4000 00038 (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC afef3000 00068 (v02 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG afef2000 0003C (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT afee7000 00028 (v01 HP 363F 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC afee6000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT afee4000 001D5 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1925MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x000aff00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ae50e
[ 0.000000] 0: 0x000ae70e -> 0x000afd94
[ 0.000000] 0: 0x000afdbf -> 0x000afe92
[ 0.000000] 0: 0x000afebf -> 0x000afee4
[ 0.000000] 0: 0x000afef7 -> 0x000aff00
[ 0.000000] On node 0 totalpages: 719908
[ 0.000000] free_area_init_node: node 0, pgdat c141ce00, node_mem_map f5770200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3851 pages used for memmap
[ 0.000000] HighMem zone: 488332 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:47100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 93 pages/cpu @f7928000 s360064 r0 d20864 u380928
[ 0.000000] pcpu-alloc: s360064 r0 d20864 u380928 alloc=93*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714277
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-rt-686-pae root=UUID=82ce0c9b-4ca0-4b03-9e98-625df9e4f88a ro pci=nocrs quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000aff00)
[ 0.000000] Memory: 2840376k/2882560k available (2914k kernel code, 39256k reserved, 1326k data, 736k init, 1968732k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1425000 - 0xc14dd000 ( 736 kB)
[ 0.000000] .data : 0xc12d8b05 - 0xc1424400 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d8b05 (2914 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2094.795 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.59 BogoMIPS (lpj=8379180)
[ 0.008006] pid_max: default: 32768 minimum: 301
[ 0.008067] Security Framework initialized
[ 0.008072] AppArmor: AppArmor disabled by boot time parameter
[ 0.008095] Mount-cache hash table entries: 512
[ 0.008218] Initializing cgroup subsys cpuacct
[ 0.008222] Initializing cgroup subsys memory
[ 0.008230] Initializing cgroup subsys devices
[ 0.008232] Initializing cgroup subsys freezer
[ 0.008234] Initializing cgroup subsys net_cls
[ 0.008236] Initializing cgroup subsys blkio
[ 0.008242] Initializing cgroup subsys perf_event
[ 0.008271] mce: CPU supports 6 MCE banks
[ 0.008331] SMP alternatives: switching to UP code
[ 0.014525] ACPI: Core revision 20110623
[ 0.020064] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062336] CPU0: AMD Sempron(tm) M120 stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.076066] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080011] Brought up 1 CPUs
[ 0.080014] Total of 1 processors activated (4189.59 BogoMIPS).
[ 0.080485] devtmpfs: initialized
[ 0.080798] PM: Registering ACPI NVS region at ae50e000 (2097152 bytes)
[ 0.080960] PM: Registering ACPI NVS region at afe92000 (184320 bytes)
[ 0.081198] print_constraints: dummy:
[ 0.081288] NET: Registered protocol family 16
[ 0.081424] node 0 link 0: io port [0, ffffff]
[ 0.081428] TOM: 00000000c0000000 aka 3072M
[ 0.081432] Fam 10h mmconf [mem 0xf7000000-0xf7ffffff]
[ 0.081435] node 0 link 0: mmio [a0000, bffff]
[ 0.081439] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.081443] node 0 link 0: mmio [d0000000, d01fffff]
[ 0.081447] node 0 link 0: mmio [d0200000, d03fffff]
[ 0.081450] node 0 link 0: mmio [d0400000, f6ffffff]
[ 0.081454] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
[ 0.081457] node 0 link 0: mmio [f8000000, ffffffff]
[ 0.081461] bus: [00, 0f] on node 0 link 0
[ 0.081464] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.081467] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.081469] bus: 00 index 2 [mem 0xc0000000-0xf6ffffff]
[ 0.081472] bus: 00 index 3 [mem 0xf8000000-0xfcffffffff]
[ 0.081556] Extended Config Space enabled on 1 nodes
[ 0.081573] ACPI: bus type pci registered
[ 0.081741] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
[ 0.081746] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
[ 0.081748] PCI: Using MMCONFIG for extended config space
[ 0.081751] PCI: Using configuration type 1 for base access
[ 0.082804] bio: create slab <bio-0> at 0
[ 0.082938] ACPI: Added _OSI(Module Device)
[ 0.082942] ACPI: Added _OSI(Processor Device)
[ 0.082945] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082948] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084436] ACPI: EC: Look up EC in DSDT
[ 0.086051] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.094818] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.096087] ACPI: Interpreter enabled
[ 0.096095] ACPI: (supports S0 S3 S4 S5)
[ 0.096142] ACPI: Using IOAPIC for interrupt routing
[ 0.110225] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.110225] ACPI: No dock devices found.
[ 0.110225] HEST: Table not found.
[ 0.110225] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.113109] \_SB_.PCI0:_OSC request failed
[ 0.113112] _OSC request data:1 8 1f
[ 0.113119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.115232] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.115236] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.115240] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.115243] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.115246] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.115249] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.115253] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.115256] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.115259] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.115262] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.115265] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.115268] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.115272] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.115275] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.115278] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.115282] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf6ffffff] (ignored)
[ 0.115285] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff] (ignored)
[ 0.115303] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.115362] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[ 0.115437] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.115477] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.115496] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.115542] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.115645] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.115666] pci 0000:00:11.0: reg 10: [io 0x4038-0x403f]
[ 0.115677] pci 0000:00:11.0: reg 14: [io 0x404c-0x404f]
[ 0.115688] pci 0000:00:11.0: reg 18: [io 0x4030-0x4037]
[ 0.115699] pci 0000:00:11.0: reg 1c: [io 0x4048-0x404b]
[ 0.115709] pci 0000:00:11.0: reg 20: [io 0x4010-0x401f]
[ 0.115720] pci 0000:00:11.0: reg 24: [mem 0xd0408000-0xd04083ff]
[ 0.115783] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.115798] pci 0000:00:12.0: reg 10: [mem 0xd0407000-0xd0407fff]
[ 0.115869] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.115884] pci 0000:00:12.1: reg 10: [mem 0xd0406000-0xd0406fff]
[ 0.115961] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.116406] pci 0000:00:12.2: reg 10: [mem 0xd0408500-0xd04085ff]
[ 0.121198] pci 0000:00:12.2: supports D1 D2
[ 0.121200] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.121229] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.121244] pci 0000:00:13.0: reg 10: [mem 0xd0405000-0xd0405fff]
[ 0.121314] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.121329] pci 0000:00:13.1: reg 10: [mem 0xd0404000-0xd0404fff]
[ 0.121406] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.122182] pci 0000:00:13.2: reg 10: [mem 0xd0408400-0xd04084ff]
[ 0.126726] pci 0000:00:13.2: supports D1 D2
[ 0.126728] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.126758] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.126869] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.126892] pci 0000:00:14.2: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[ 0.126964] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.126981] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.127065] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.127116] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.127138] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.127155] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.127174] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.127194] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.127282] PCI: peer root bus 00 res updated from pci conf
[ 0.127317] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[ 0.127327] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.127333] pci 0000:01:05.0: reg 14: [io 0x3000-0x30ff]
[ 0.127339] pci 0000:01:05.0: reg 18: [mem 0xd0300000-0xd030ffff]
[ 0.127351] pci 0000:01:05.0: reg 24: [mem 0xd0200000-0xd02fffff]
[ 0.127371] pci 0000:01:05.0: supports D1 D2
[ 0.127383] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[ 0.127393] pci 0000:01:05.1: reg 10: [mem 0xd0310000-0xd0313fff]
[ 0.127428] pci 0000:01:05.1: supports D1 D2
[ 0.127508] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.127512] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.127516] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.127520] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.127571] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.127590] pci 0000:02:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.127671] pci 0000:02:00.0: supports D1
[ 0.127673] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.136048] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.136053] pci 0000:00:05.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.136122] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.136136] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.136159] pci 0000:03:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.136174] pci 0000:03:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.136184] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.136235] pci 0000:03:00.0: supports D1 D2
[ 0.136238] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.144073] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.144077] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.144083] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.144148] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.144159] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.144162] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.144166] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xf6ffffff] (subtractive decode)
[ 0.144170] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfcffffffff] (subtractive decode)
[ 0.144185] pci_bus 0000:00: on NUMA node 0
[ 0.144189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.144950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.145065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.145190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.145380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.145702] \_SB_.PCI0:_OSC request failed
[ 0.145704] _OSC request data:1 1f 1f
[ 0.145710] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.145789] \_SB_.PCI0:_OSC request failed
[ 0.145791] _OSC request data:1 0 1d
[ 0.145797] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.145800] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.159027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159233] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159397] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159519] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159642] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.159921] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.159928] vgaarb: loaded
[ 0.159930] vgaarb: bridge control possible 0000:01:05.0
[ 0.160016] PCI: Using ACPI for IRQ routing
[ 0.160416] PCI: pci_cache_line_size set to 64 bytes
[ 0.160539] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.160545] reserve RAM buffer: 00000000ae50e000 - 00000000afffffff
[ 0.160553] reserve RAM buffer: 00000000afd94000 - 00000000afffffff
[ 0.160560] reserve RAM buffer: 00000000afe92000 - 00000000afffffff
[ 0.160566] reserve RAM buffer: 00000000afee4000 - 00000000afffffff
[ 0.160570] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[ 0.160777] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.160784] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.162878] Switching to clocksource hpet
[ 0.163491] pnp: PnP ACPI init
[ 0.163515] ACPI: bus type pnp registered
[ 0.164681] pnp 00:00: [bus 00-ff]
[ 0.164684] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.164688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.164691] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.164693] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.164696] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.164699] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.164702] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.164705] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.164707] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.164710] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.164713] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.164716] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.164719] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.164722] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.164724] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.164727] pnp 00:00: [mem 0xc0000000-0xf6ffffff window]
[ 0.164730] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.164733] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.164810] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.165357] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.165360] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.165363] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
[ 0.165452] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.165456] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.165460] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
[ 0.165464] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165690] pnp 00:02: [irq 0 disabled]
[ 0.165701] pnp 00:02: [irq 8]
[ 0.165703] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.165746] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.165800] pnp 00:03: [io 0x0000-0x000f]
[ 0.165803] pnp 00:03: [io 0x0081-0x008f]
[ 0.165806] pnp 00:03: [io 0x00c0-0x00df]
[ 0.165809] pnp 00:03: [dma 4]
[ 0.165856] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.165871] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.165909] pnp 00:04: [irq 13]
[ 0.165955] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.166029] pnp 00:05: [io 0x0070-0x0071]
[ 0.166078] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.166092] pnp 00:06: [io 0x0061]
[ 0.166140] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.166159] pnp 00:07: [io 0x0060]
[ 0.166162] pnp 00:07: [io 0x0064]
[ 0.166206] pnp 00:07: [irq 1]
[ 0.166262] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.166313] pnp 00:08: [irq 12]
[ 0.166373] pnp 00:08: Plug and Play ACPI device, IDs SYN1e11 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.166393] pnp 00:09: [io 0x0010-0x001f]
[ 0.166396] pnp 00:09: [io 0x002e-0x002f]
[ 0.166398] pnp 00:09: [io 0x0072-0x0073]
[ 0.166401] pnp 00:09: [io 0x0080]
[ 0.166403] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.166406] pnp 00:09: [io 0x0092]
[ 0.166408] pnp 00:09: [io 0x0400-0x04cf]
[ 0.166413] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.166416] pnp 00:09: [io 0x04d6]
[ 0.166418] pnp 00:09: [io 0x0680-0x06ff]
[ 0.166421] pnp 00:09: [io 0x077a]
[ 0.166423] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.166426] pnp 00:09: [io 0x0c14]
[ 0.166428] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.166430] pnp 00:09: [io 0x0c6c]
[ 0.166433] pnp 00:09: [io 0x0c6f]
[ 0.166435] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.166438] pnp 00:09: [io 0x0380-0x0387]
[ 0.166533] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.166537] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.166541] system 00:09: [io 0x04d6] has been reserved
[ 0.166544] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.166548] system 00:09: [io 0x077a] has been reserved
[ 0.166552] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.166555] system 00:09: [io 0x0c14] has been reserved
[ 0.166559] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.166562] system 00:09: [io 0x0c6c] has been reserved
[ 0.166566] system 00:09: [io 0x0c6f] has been reserved
[ 0.166570] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.166573] system 00:09: [io 0x0380-0x0387] has been reserved
[ 0.166577] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166662] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.166665] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[ 0.166770] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.166774] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.166778] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.167380] pnp: PnP ACPI: found 11 devices
[ 0.167383] ACPI: ACPI bus type pnp unregistered
[ 0.167386] PnPBIOS: Disabled by ACPI PNP
[ 0.204927] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.204932] PCI: max bus depth: 1 pci_try_num: 2
[ 0.204992] pci 0000:00:06.0: BAR 14: assigned [mem 0xd0500000-0xd05fffff]
[ 0.204996] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.205000] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.205004] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.205008] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.205013] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.205018] pci 0000:00:05.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.205025] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0020000-0xd002ffff pref]
[ 0.205028] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.205032] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.205036] pci 0000:00:06.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.205040] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.205045] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.205096] pci 0000:00:01.0: setting latency timer to 64
[ 0.205112] pci 0000:00:05.0: setting latency timer to 64
[ 0.205122] pci 0000:00:06.0: setting latency timer to 64
[ 0.205130] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.205133] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.205136] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xf6ffffff]
[ 0.205140] pci_bus 0000:00: resource 7 [mem 0xf8000000-0xfcffffffff]
[ 0.205143] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.205146] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd03fffff]
[ 0.205149] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.205153] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.205156] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.205159] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.205163] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.205166] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.205169] pci_bus 0000:04: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.205172] pci_bus 0000:04: resource 6 [mem 0xc0000000-0xf6ffffff]
[ 0.205176] pci_bus 0000:04: resource 7 [mem 0xf8000000-0xfcffffffff]
[ 0.205260] NET: Registered protocol family 2
[ 0.205358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.205806] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.206356] TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
[ 0.207489] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.207492] TCP reno registered
[ 0.207497] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.207521] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.207664] NET: Registered protocol family 1
[ 0.207680] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.120091] pci 0000:01:05.0: Boot video device
[ 1.120108] PCI: CLS 64 bytes, default 64
[ 1.120204] Unpacking initramfs...
[ 1.422052] Freeing initrd memory: 9472k freed
[ 1.425778] Simple Boot Flag at 0x44 set to 0x1
[ 1.426054] IBS: LVT offset 1 assigned
[ 1.426071] perf: AMD IBS detected (0x0000001f)
[ 1.426298] audit: initializing netlink socket (disabled)
[ 1.426318] type=2000 audit(1360771368.424:1): initialized
[ 1.445518] highmem bounce pool size: 64 pages
[ 1.445524] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.445783] VFS: Disk quotas dquot_6.5.2
[ 1.445837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.445929] msgmni has been set to 1720
[ 1.446228] alg: No test for stdrng (krng)
[ 1.446266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.446270] io scheduler noop registered
[ 1.446272] io scheduler deadline registered
[ 1.446293] io scheduler cfq registered (default)
[ 1.446461] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.446493] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.446550] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.446576] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 1.446681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.446720] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.446723] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.447180] ERST: Table is not found!
[ 1.447182] GHES: HEST is not enabled!
[ 1.447200] isapnp: Scanning for PnP cards...
[ 1.831487] isapnp: No Plug & Play device found
[ 1.831564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.876447] Linux agpgart interface v0.103
[ 1.877039] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.894793] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.894848] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.895003] mousedev: PS/2 mouse device common for all mice
[ 1.896147] rtc_cmos 00:05: RTC can wake from S4
[ 1.896268] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.896358] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.896373] cpuidle: using governor ladder
[ 1.896375] cpuidle: using governor menu
[ 1.896803] TCP cubic registered
[ 1.896862] NET: Registered protocol family 10
[ 1.897902] Mobile IPv6
[ 1.897906] NET: Registered protocol family 17
[ 1.897911] Registering the dns_resolver key type
[ 1.897936] Using IPI No-Shortcut mode
[ 1.898058] PM: Hibernation image not present or could not be loaded.
[ 1.898078] registered taskstats version 1
[ 1.898540] rtc_cmos 00:05: setting system clock to 2013-02-13 16:02:50 UTC (1360771370)
[ 1.898631] Initializing network drop monitor service
[ 1.898827] Freeing unused kernel memory: 736k freed
[ 1.899158] Write protecting the kernel text: 2916k
[ 1.899211] Write protecting the kernel read-only data: 1060k
[ 1.899213] NX-protecting the kernel data: 3228k
[ 1.912335] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.928198] udev[48]: starting version 164
[ 1.998287] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.998332] r8169 0000:03:00.0: setting latency timer to 64
[ 1.998382] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 1.999255] r8169 0000:03:00.0: eth0: RTL8102e at 0xf821e000, 78:ac:c0:4d:b6:ca, XID 04c00000 IRQ 42
[ 2.023396] usbcore: registered new interface driver usbfs
[ 2.023429] usbcore: registered new interface driver hub
[ 2.105331] SCSI subsystem initialized
[ 2.107924] usbcore: registered new device driver usb
[ 2.131315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.131403] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 2.131408] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.131444] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.131494] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.131529] ehci_hcd 0000:00:12.2: debug port 1
[ 2.132103] [Firmware Bug]: Invalid critical threshold (0)
[ 2.133849] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.133853] ACPI: Thermal Zone [THRM] (66 C)
[ 2.135618] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0408500
[ 2.135676] libata version 3.00 loaded.
[ 2.144073] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.144146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.144150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.144153] usb usb1: Product: EHCI Host Controller
[ 2.144155] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ehci_hcd
[ 2.144158] usb usb1: SerialNumber: 0000:00:12.2
[ 2.144338] hub 1-0:1.0: USB hub found
[ 2.144345] hub 1-0:1.0: 6 ports detected
[ 2.144586] ahci 0000:00:11.0: version 3.0
[ 2.144737] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.144742] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.145545] scsi0 : ahci
[ 2.145750] scsi1 : ahci
[ 2.145865] ata1: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408100 irq 22
[ 2.145869] ata2: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408180 irq 22
[ 2.146083] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 2.146087] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.146104] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.146116] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.146148] ehci_hcd 0000:00:13.2: debug port 1
[ 2.146370] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0408400
[ 2.156053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.156120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.156124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.156126] usb usb2: Product: EHCI Host Controller
[ 2.156129] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ehci_hcd
[ 2.156131] usb usb2: SerialNumber: 0000:00:13.2
[ 2.156298] hub 2-0:1.0: USB hub found
[ 2.156305] hub 2-0:1.0: 6 ports detected
[ 2.236624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.236712] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 2.236716] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.236732] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.238653] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd0407000
[ 2.296079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.296084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.296087] usb usb3: Product: OHCI Host Controller
[ 2.296090] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.296092] usb usb3: SerialNumber: 0000:00:12.0
[ 2.296361] hub 3-0:1.0: USB hub found
[ 2.296405] hub 3-0:1.0: 3 ports detected
[ 2.296629] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 2.296633] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.296645] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.296700] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd0406000
[ 2.356088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.356092] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.356095] usb usb4: Product: OHCI Host Controller
[ 2.356097] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.356100] usb usb4: SerialNumber: 0000:00:12.1
[ 2.356342] hub 4-0:1.0: USB hub found
[ 2.356385] hub 4-0:1.0: 3 ports detected
[ 2.356598] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 2.356602] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.356616] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.356683] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0405000
[ 2.416078] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.416081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.416084] usb usb5: Product: OHCI Host Controller
[ 2.416087] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.416090] usb usb5: SerialNumber: 0000:00:13.0
[ 2.416323] hub 5-0:1.0: USB hub found
[ 2.416366] hub 5-0:1.0: 3 ports detected
[ 2.416580] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 2.416584] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.416595] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.416639] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0404000
[ 2.432051] Refined TSC clocksource calibration: 2094.750 MHz.
[ 2.432057] Switching to clocksource tsc
[ 2.456050] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 2.476058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.476061] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.476064] usb usb6: Product: OHCI Host Controller
[ 2.476066] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.4-rt-686-pae ohci_hcd
[ 2.476069] usb usb6: SerialNumber: 0000:00:13.1
[ 2.476310] hub 6-0:1.0: USB hub found
[ 2.476354] hub 6-0:1.0: 3 ports detected
[ 2.592466] usb 1-3: New USB device found, idVendor=5986, idProduct=0180
[ 2.592470] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.592474] usb 1-3: Product: HP Webcam-101
[ 2.592476] usb 1-3: Manufacturer: Novatek
[ 2.592478] usb 1-3: SerialNumber: 961230000000100
[ 2.636061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.636091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.638379] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 2.638383] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.640709] ata1.00: configured for UDMA/100
[ 2.640844] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 2.651742] ata2.00: ATAPI: hp DVD RW AD-7561S, AH73, max UDMA/100
[ 2.668210] ata2.00: configured for UDMA/100
[ 2.671529] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7561S AH73 PQ: 0 ANSI: 5
[ 2.683154] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.683225] sd 0:0:0:0: [sda] Write Protect is off
[ 2.683229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.683260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.689504] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.689509] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.689969] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.741238] sda: sda1 sda2 < sda5 >
[ 2.741749] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.748927] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.749998] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.953213] PM: Starting manual resume from disk
[ 2.953218] PM: Hibernation image partition 8:5 present
[ 2.953220] PM: Looking for hibernation image.
[ 2.953502] PM: Image not found (code -22)
[ 2.953504] PM: Hibernation image not present or could not be loaded.
[ 2.964329] EXT3-fs (sda1): recovery required on readonly filesystem
[ 2.964333] EXT3-fs (sda1): write access will be enabled during recovery
[ 2.968030] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[ 3.141121] usb 6-1: New USB device found, idVendor=03f0, idProduct=231d
[ 3.141126] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.141129] usb 6-1: Product: HP Integrated Module
[ 3.141131] usb 6-1: Manufacturer: Broadcom Corp
[ 3.543536] EXT3-fs (sda1): recovery complete
[ 3.543551] kjournald starting. Commit interval 5 seconds
[ 3.544073] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.892690] udev[323]: starting version 164
[ 5.172682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.172939] cfg80211: Calling CRDA to update world regulatory domain
[ 5.183921] ACPI: acpi_idle registered with cpuidle
[ 5.313027] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.321874] acpi device:04: registered as cooling_device1
[ 5.322063] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2
[ 5.322163] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.464838] Bluetooth: Core ver 2.16
[ 5.465002] NET: Registered protocol family 31
[ 5.465005] Bluetooth: HCI device and connection manager initialized
[ 5.465009] Bluetooth: HCI socket layer initialized
[ 5.465012] Bluetooth: L2CAP socket layer initialized
[ 5.465022] Bluetooth: SCO socket layer initialized
[ 5.485911] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.486617] usbcore: registered new interface driver btusb
[ 5.493298] Linux media interface: v0.10
[ 5.825862] ACPI: Battery Slot [BAT0] (battery present)
[ 5.825958] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.826534] ACPI: Power Button [PWRB]
[ 5.827228] ACPI: AC Adapter [ACAD] (off-line)
[ 5.827416] wmi: Mapper loaded
[ 5.827499] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.829360] ACPI: Sleep Button [SLPB]
[ 5.829481] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 5.839053] ACPI: Lid Switch [LID]
[ 5.839160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.839235] ACPI: Power Button [PWRF]
[ 5.873829] powernow-k8: Found 1 AMD Sempron(tm) M120 (1 cpu cores) (version 2.20.00)
[ 5.873905] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 5.873908] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 5.873910] powernow-k8: 2 : pstate 2 (800 MHz)
[ 5.890383] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[ 5.890387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.937777] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.937923] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.945925] Linux video capture interface: v2.00
[ 5.971727] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0180)
[ 5.975569] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
[ 5.976772] usbcore: registered new interface driver uvcvideo
[ 5.976780] USB Video Class driver (1.1.1)
[ 6.132581] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 6.142174] [drm] Initialized drm 1.1.0 20060810
[ 6.175547] ath9k 0000:02:00.0: setting latency timer to 64
[ 6.212088] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 6.240206] ath: EEPROM regdomain: 0x6a
[ 6.240210] ath: EEPROM indicates we should expect a direct regpair map
[ 6.240214] ath: Country alpha2 being used: 00
[ 6.240216] ath: Regpair used: 0x6a
[ 6.278069] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.288070] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.289106] Registered led device: ath9k-phy0
[ 6.289272] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8520000, irq=17
[ 6.292439] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.292633] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.299841] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 6.336739] [drm] radeon kernel modesetting enabled.
[ 6.347432] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 6.347447] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 6.347466] radeon 0000:01:05.0: setting latency timer to 64
[ 6.350007] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x363F).
[ 6.350092] [drm] register mmio base: 0xD0300000
[ 6.350098] [drm] register mmio size: 65536
[ 6.381193] ATOM BIOS: HP_RavLas20
[ 6.381229] radeon 0000:01:05.0: VRAM: 336M 0x00000000C0000000 - 0x00000000D4FFFFFF (336M used)
[ 6.381233] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 6.382486] [drm] Detected VRAM RAM=336M, BAR=256M
[ 6.382490] [drm] RAM width 32bits DDR
[ 6.384977] [TTM] Zone kernel: Available graphics memory: 440926 kiB.
[ 6.384981] [TTM] Zone highmem: Available graphics memory: 1425292 kiB.
[ 6.384984] [TTM] Initializing pool allocator.
[ 6.385017] [drm] radeon: 336M of VRAM memory ready
[ 6.385020] [drm] radeon: 512M of GTT memory ready.
[ 6.385055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.385058] [drm] Driver supports precise vblank timestamp query.
[ 6.387688] [drm] radeon: irq initialized.
[ 6.387695] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.389556] [drm] Loading RS780 Microcode
[ 6.465746] platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[ 6.525000] platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
[ 6.540463] platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[ 6.547485] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 6.547605] radeon 0000:01:05.0: WB enabled
[ 6.585886] [drm] ring test succeeded in 1 usecs
[ 6.587199] [drm] radeon: ib pool ready.
[ 6.587354] [drm] ib test succeeded in 0 usecs
[ 6.588993] [drm] Radeon Display Connectors
[ 6.588996] [drm] Connector 0:
[ 6.588998] [drm] VGA
[ 6.589001] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.589003] [drm] Encoders:
[ 6.589005] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.589008] [drm] Connector 1:
[ 6.589009] [drm] LVDS
[ 6.589012] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.589014] [drm] Encoders:
[ 6.589016] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 6.589018] [drm] Connector 2:
[ 6.589020] [drm] HDMI-A
[ 6.589021] [drm] HPD1
[ 6.589024] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 6.589026] [drm] Encoders:
[ 6.589028] [drm] DFP1: INTERNAL_UNIPHY
[ 6.589125] [drm] radeon: power management initialized
[ 6.792581] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 6.871674] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 7.450596] [drm] fb mappable at 0xC0142000
[ 7.450600] [drm] vram apper at 0xC0000000
[ 7.450602] [drm] size 4325376
[ 7.450604] [drm] fb depth is 24
[ 7.450606] [drm] pitch is 5632
[ 7.450775] fbcon: radeondrmfb (fb0) is primary device
[ 7.529737] Console: switching to colour frame buffer device 170x48
[ 7.541097] fb0: radeondrmfb frame buffer device
[ 7.541100] drm: registered panic notifier
[ 7.541107] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 7.907990] Adding 5569532k swap on /dev/sda5. Priority:-1 extents:1 across:5569532k
[ 8.039338] EXT3-fs (sda1): using internal journal
[ 8.108849] loop: module loaded
[ 9.136758] fuse init (API version 7.17)
[ 9.931326] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.125223] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 11.369399] r8169 0000:03:00.0: eth0: link down
[ 11.369560] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.780781] apm: BIOS not found.
[ 13.868863] Bluetooth: RFCOMM TTY layer initialized
[ 13.868879] Bluetooth: RFCOMM socket layer initialized
[ 13.868884] Bluetooth: RFCOMM ver 1.11
[ 13.904316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.904322] Bluetooth: BNEP filters: protocol multicast
[ 13.942001] Bridge firewalling registered
[ 15.129589] lp: driver loaded but no devices found
[ 15.139272] ppdev: user-space parallel port driver
[ 17.485685] sshd (1750): /proc/1750/oom_adj is deprecated, please use /proc/1750/oom_score_adj instead.
[ 58.702970] wlan0: authenticate with 84:1b:5e:03:e3:bf (try 1)
[ 58.704959] wlan0: authenticated
[ 58.704998] wlan0: associate with 84:1b:5e:03:e3:bf (try 1)
[ 58.708767] wlan0: RX AssocResp from 84:1b:5e:03:e3:bf (capab=0x411 status=0 aid=4)
[ 58.708772] wlan0: associated
[ 58.721626] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Reply to: