Your message dated Sun, 16 Dec 2012 19:21:49 +0000 with message-id <1355685709.18807.163.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#592943: Feel free to close has caused the Debian Bug report #592943, regarding Can't connect to WEP network: "eth1: Lucent/Agere firmware doesn't support manual roaming" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 592943: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=592943 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Can't connect to WEP network: "eth1: Lucent/Agere firmware doesn't support manual roaming"
- From: Oliver Sander <sander@mi.fu-berlin.de>
- Date: Sat, 14 Aug 2010 13:11:34 +0200
- Message-id: <4C6679E6.1020109@mi.fu-berlin.de>
Package: linux-2.6 Version: 2.6.32-18 Severity: normal I cannot connect to a WEP network. The kde network manager keeps asking me for the password. This is after a complete reinstall of Debian Squeeze. Connecting to the very same network worked when the machine was still running Lenny. One other way to connect is to use the kernel shipped with Ubuntu 10.4. The firmware-linux-nonfree package needs to be removed for this---I guess they ship their own firmware. In case you wonder about the linux-base package from experimenal: it was pulled in when I installed the 2.6.35 kernel from experimental. That did not appear to change anything, but I am too scared to downgrade again. -- Package-specific info: ** Version:Linux version 2.6.32-5-686 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 02:27:10 UTC 2010** Command line:BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=2b4fbfbd-8cd8-4da5-b90c-7b281a41435b ro quiet** Not tainted ** Kernel log: [ 7.901738] intel_rng: FWH not detected[ 7.925838] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.036778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7 [ 8.037020] ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no)[ 8.100735] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.889669] [drm] Initialized drm 1.1.0 20060810[ 8.970529] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 9.125816] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10[ 9.125833] pci 0000:00:02.0: setting latency timer to 64[ 9.138369] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0[ 9.412976] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:0122] [ 9.541048] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10 [ 9.541061] yenta_cardbus 0000:02:03.0: Socket status: 30000006[ 9.541081] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 9.541093] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean. [ 9.542535] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 9.542547] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x18000000 - 0x21ffffff[ 9.543151] yenta_cardbus 0000:02:07.0: CardBus bridge found [12a3:ab01][ 9.543175] yenta_cardbus 0000:02:07.0: Enabling burst memory read transactions [ 9.543186] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC interrupts to PCI[ 9.543194] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI [ 9.543204] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01000002, devctl 0x60 [ 9.773048] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0000, PCI irq 10 [ 9.773061] yenta_cardbus 0000:02:07.0: Socket status: 30000010[ 9.773072] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 9.773097] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 9.773110] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff: clean. [ 9.774549] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 9.774560] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x18000000 - 0x21ffffff [ 10.234342] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 10.235355] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 10.235854] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 10.236399] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 10.237180] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 10.412083] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 10.528166] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10[ 10.528206] Intel ICH 0000:00:1f.5: setting latency timer to 64[ 10.576068] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff[ 10.585810] pcmcia 1.0: pcmcia: registering new device pcmcia1.0[ 10.594737] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 10.595748] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 10.596585] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 10.597015] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 10.597793] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.[ 10.903008] cfg80211: Using static regulatory domain info [ 10.903016] cfg80211: Regulatory domain: US[ 10.903023] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 10.903032] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 10.903041] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.903051] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.903059] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.903068] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.903077] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 10.903789] cfg80211: Calling CRDA for country: US[ 11.342873] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) [ 11.396322] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)[ 11.478151] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000 [ 11.478271] orinoco_cs 1.0: Station identity 001f:0001:0008:000a [ 11.478281] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10 [ 11.505283] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin [ 11.680700] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000 [ 11.680832] orinoco_cs 1.0: Station identity 001f:0002:0009:0030 [ 11.680842] orinoco_cs 1.0: Firmware determined as Lucent/Agere 9.48 [ 11.680849] orinoco_cs 1.0: Ad-hoc demo mode supported [ 11.680855] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported [ 11.680862] orinoco_cs 1.0: WEP supported, 104-bit key [ 11.680868] orinoco_cs 1.0: WPA-PSK supported[ 11.736062] intel8x0_measure_ac97_clock: measured 53241 usecs (2558 samples)[ 11.736073] intel8x0: clocking to 48000[ 11.738639] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10[ 11.738689] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64[ 13.215256] Adding 1100412k swap on /dev/sda5. Priority:-1 extents:1 across:1100412k[ 13.649720] EXT3 FS on sda1, internal journal [ 13.892941] loop: module loaded [ 16.496916] fuse init (API version 7.13)[ 18.622102] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8[ 22.443290] eth0: setting half-duplex. [ 22.443473] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.458534] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.845814] apm: BIOS not found. [ 26.924599] Bluetooth: Core ver 2.15 [ 26.924761] NET: Registered protocol family 31 [ 26.924767] Bluetooth: HCI device and connection manager initialized [ 26.924776] Bluetooth: HCI socket layer initialized [ 27.370439] Bluetooth: L2CAP ver 2.14 [ 27.370448] Bluetooth: L2CAP socket layer initialized [ 27.489265] Bluetooth: RFCOMM TTY layer initialized [ 27.489279] Bluetooth: RFCOMM socket layer initialized [ 27.489285] Bluetooth: RFCOMM ver 1.11 [ 27.552180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.552190] Bluetooth: BNEP filters: protocol multicast [ 27.763804] Bridge firewalling registered [ 27.873814] Bluetooth: SCO (Voice Link) ver 0.6 [ 27.873825] Bluetooth: SCO socket layer initialized [ 29.246729] lp: driver loaded but no devices found [ 29.493411] ppdev: user-space parallel port driver [ 136.176757] eth1: Lucent/Agere firmware doesn't support manual roaming [ 141.489899] eth1: Lucent/Agere firmware doesn't support manual roaming [ 146.841274] eth1: Lucent/Agere firmware doesn't support manual roaming [ 152.141743] eth1: Lucent/Agere firmware doesn't support manual roaming ** Model information not available ** Loaded modules: Module Size Used by speedstep_ich 1765 0 speedstep_lib 2468 1 speedstep_ich cpufreq_conservative 4018 0 cpufreq_stats 1940 0 cpufreq_userspace 1480 0 cpufreq_powersave 602 0 parport_pc 15799 0 ppdev 4058 0 lp 5570 0 parport 22554 3 parport_pc,ppdev,lp sco 5857 2 bridge 32987 0 stp 996 1 bridge bnep 7444 2 rfcomm 25167 0 l2cap 21705 4 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36327 6 sco,bnep,rfcomm,l2cap binfmt_misc 4907 1 uinput 4796 1 fuse 43758 1 loop 9757 0 michael_mic 1506 4 orinoco_cs 8013 1 orinoco 47577 1 orinoco_cs cfg80211 87601 1 orinoco rfkill 10264 3 bluetooth,cfg80211 snd_intel8x0m 8100 0 snd_intel8x0 19523 2 snd_ac97_codec 79148 2 snd_intel8x0m,snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss pcmcia 17442 1 orinoco_cssnd_pcm 47214 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_osssnd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi yenta_socket 16403 4 snd_seq_midi_event 3684 1 snd_seq_midi rsrc_nonstatic 7057 1 yenta_socket snd_seq 35463 2 snd_seq_midi,snd_seq_midi_eventpcmcia_core 20450 4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatici915 220208 1 i2c_i801 6462 0 drm_kms_helper 18305 1 i915 snd_timer 12258 2 snd_pcm,snd_seq drm 112020 3 i915,drm_kms_helper snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq i2c_algo_bit 3497 1 i915i2c_core 12696 5 i915,i2c_i801,drm_kms_helper,drm,i2c_algo_bit snd 34363 14 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_devicejoydev 6771 0 shpchp 21220 0 video 14605 1 i915 dcdbas 3892 0 rng_core 2178 0 ac 1640 0 output 1204 1 video battery 3782 0 evdev 5609 21 container 1833 0 pci_hotplug 18065 1 shpchp processor 26599 1 soundcore 3450 1 snd snd_page_alloc 5045 3 snd_intel8x0m,snd_intel8x0,snd_pcm pcspkr 1207 0 psmouse 44657 0 button 3598 1 i915 serio_raw 2916 0 ext3 94204 1 jbd 32169 1 ext3 mbcache 3762 1 ext3 sd_mod 25869 3 crc_t10dif 1012 1 sd_mod ata_generic 2019 0 ata_piix 17640 2 firewire_ohci 16509 0 thermal 9206 0 uhci_hcd 16057 0 libata 115721 2 ata_generic,ata_piix 3c59x 25040 0 floppy 40923 0 ehci_hcd 27851 0 firewire_core 31187 1 firewire_ohci crc_itu_t 1035 1 firewire_core thermal_sys 9378 3 video,processor,thermal usbcore 98402 3 uhci_hcd,ehci_hcd mii 2714 1 3c59x scsi_mod 101401 2 sd_mod,libata nls_base 4541 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000link/ether 00:06:5b:89:aa:2d brd ff:ff:ff:ff:ff:ff3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DORMANT qlen 1000link/ether 00:02:2d:59:33:e2 brd ff:ff:ff:ff:ff:ff 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 5a:0e:5d:c5:1f:37 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmitface |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 12644 190 0 0 0 0 0 0 12644 190 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0*** Protocol statistics: Ip: 144 total packets received 0 forwarded 0 incoming packets discarded 144 incoming packets delivered 144 requests sent out 12 outgoing packets dropped Icmp: 20 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 20 20 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 20 IcmpMsg: InType3: 20 OutType3: 20 Tcp: 51 active connections openings 5 passive connection openings 46 failed connection attempts 0 connection resets received 0 connections established 142 segments received 142 segments send out 0 segments retransmited 0 bad segments received. 46 resets sent Udp: 8 packets received 20 packets to unknown port received. 0 packet receive errors 28 packets sent UdpLite: TcpExt: 5 TCP sockets finished time wait in fast timer 0 packet headers predicted 15 acknowledgments not containing data payload received 5 predicted acknowledgments IpExt: InOctets: 9424 OutOctets: 9424 *** Device features: eth0: 0x803 eth1: 0x2000 lo: 0x13865 pan0: 0xff3865 ** PCI devices:00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host Bridge [8086:3575] (rev 04)Subsystem: Dell Device [1028:0122]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: <access denied> Kernel driver in use: agpgart-intel00:02.0 VGA compatible controller [0300]: Intel Corporation 82830 CGC [Chipset Graphics Controller] [8086:3577] (rev 04) (prog-if 00 [VGA controller])Subsystem: Dell Device [1028:0122]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied>00:02.1 Display controller [0380]: Intel Corporation 82830 CGC [Chipset Graphics Controller] [8086:3577]Subsystem: Dell Device [1028:0122]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 (2500ns max) Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])Subsystem: Dell Device [1028:0122]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 8c80 [size=32] Kernel driver in use: uhci_hcd00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])Subsystem: Dell Device [1028:0122]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 8ca0 [size=32] Kernel driver in use: uhci_hcd00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])Subsystem: Dell Device [1028:0122]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 8cc0 [size=32] Kernel driver in use: uhci_hcd00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Bus: primary=00, secondary=02, subordinate=07, sec-latency=168 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e0200000-e02fffff Prefetchable memory behind bridge: 18000000-21ffffffSecondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 000:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])Subsystem: Dell Device [1028:0122]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 9000 [size=16] Region 5: Memory at 22000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02)Subsystem: Dell Device [1028:0122]Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 8ce0 [size=32] Kernel driver in use: i801_smbus00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)Subsystem: Dell Device [1028:0122]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 8400 [size=256] Region 1: I/O ports at 80c0 [size=64] Kernel driver in use: Intel ICH00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem Controller [8086:2486] (rev 02) (prog-if 00 [Generic])Subsystem: PCTel Inc Dell Inspiron 2100 internal modem [134d:4c21]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 8800 [size=256] Region 1: I/O ports at 8c00 [size=128] Kernel driver in use: Intel ICH Modem 02:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev b8) Subsystem: Dell Device [1028:0122]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 168 Interrupt: pin A routed to IRQ 10 Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=03, sec-latency=176 Memory window 0: 18000000-1bfff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 0000a400-0000a4ff I/O window 1: 0000a800-0000a8ffBridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus02:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394 Controller [1180:0551] (prog-if 10 [OHCI])Subsystem: Dell Device [1028:0122]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci02:05.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)Subsystem: Dell Device [1028:0122]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=128] Region 1: Memory at e0200800 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x02:07.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 01)Subsystem: Lucent Technologies Device [12a3:ab01]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 1c000000-1ffff000 (prefetchable) Memory window 1: 28000000-2bfff000 I/O window 0: 0000ac00-0000acff I/O window 1: 00001000-000010ffBridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus ** USB devices: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on:ii debconf [debconf 1.5.33 Debian configuration management sy ii initramfs-tools 0.97.2 tools for generating an initramfsii linux-base 2.6.35-1~experimental.1 Linux image base packageii module-init-tool 3.12-1 tools for managing Linux kernel moVersions of packages linux-image-2.6.32-5-686 recommends: pn firmware-linux-free <none> (no description available)ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [iVersions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available)ii firmware-linux-nonfree 0.26 Binary firmware for various driverpn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: truelinux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: truelinux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686: * linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
- To: 592943-done@bugs.debian.org
- Subject: Re: Bug#592943: Feel free to close
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 16 Dec 2012 19:21:49 +0000
- Message-id: <1355685709.18807.163.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 50CA47A1.9020803@mi.fu-berlin.de>
- References: <[🔎] 50CA47A1.9020803@mi.fu-berlin.de>
On Thu, 2012-12-13 at 22:24 +0100, Oliver Sander wrote: > I have gotten rid of this hardware. Feel free to close the bug. OK, closing. Ben. -- Ben Hutchings Always try to do things in chronological order; it's less confusing that way.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---