[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#695676: marked as done (snd_rawmidi: Unknown symbol snd_card_unref (err 0) on loading snd-usb-audio)

Your message dated Wed, 12 Dec 2012 12:22:38 +0000
with message-id <1355314958.5526.14.camel@deadeye.wl.decadent.org.uk>
and subject line Re: Bug#695676: snd_rawmidi: Unknown symbol snd_card_unref (err 0) on loading snd-usb-audio
has caused the Debian Bug report #695676,
regarding snd_rawmidi: Unknown symbol snd_card_unref (err 0) on loading snd-usb-audio
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
695676: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=695676
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.2.35-1
Severity: normal

loading of snd-usb-audio fails with errormessage

	snd_rawmidi: Unknown symbol snd_card_unref (err 0)



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1

** Command line:
initrd=/boot/initrd.img-3.2.0-4-amd64 root=/dev/disk/by-uuid/813cbe8d-99ea-488b-bd22-5cb211a6449a ro quiet BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[451487.028885] usb 4-1.4: reset high-speed USB device number 103 using ehci_hcd
[451487.112668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[451487.116077] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[451487.118328] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[451487.118338] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[451487.120659] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[451487.120957] usb 4-1.4: device firmware changed
[451487.121220] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[451487.121233] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[451487.121235] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[451487.122092] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[451487.122103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[451487.122111] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[451487.122429] ata1.00: configured for UDMA/133
[451487.128213] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[451487.128656] ata5: SATA link down (SStatus 0 SControl 300)
[451487.130461] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[451487.130470] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[451487.133650] ata2.00: configured for UDMA/100
[451487.192816] usb 3-1.6: reset high-speed USB device number 5 using ehci_hcd
[451487.280825] sdhci-pci 0000:05:00.0: setting latency timer to 64
[451487.294545] PM: resume of devices complete after 520.345 msecs
[451487.294611] PM: Finishing wakeup.
[451487.294612] Restarting tasks ... 
[451487.295439] usb 4-1.4: USB disconnect, device number 103
[451487.295803] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, ffff8800a91e9000/a91e9000 (bad dma)
[451487.295897] cdc_ncm 4-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM
[451487.305440] done.
[451487.305754] video LNXVIDEO:00: Restoring backlight state
[451487.328721] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, ffff8800a91dd000/a91dd000 (bad dma)
[451487.400680] usb 4-1.4: new high-speed USB device number 104 using ehci_hcd
[451487.493587] usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[451487.493597] usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[451487.493604] usb 4-1.4: Product: \xffffffe3\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1w
[451487.493609] usb 4-1.4: SerialNumber: 2BB9A781BC172640
[451487.539279] generic-usb: probe of 0003:0BDB:1912.004C failed with error -71
[451487.539567] usb 3-1.5: USB disconnect, device number 13
[451487.539578] usb 3-1.5.5: USB disconnect, device number 14
[451487.577224] usb 3-1.5.6: USB disconnect, device number 20
[451487.692426] usb 1-1: new high-speed USB device number 22 using xhci_hcd
[451487.709870] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[451487.709872] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[451487.710516] hub 1-1:1.0: USB hub found
[451487.710713] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[451487.710866] hub 1-1:1.0: 4 ports detected
[451487.713699] usb 4-1.4: USB disconnect, device number 104
[451487.984513] usb 1-1.2: new low-speed USB device number 23 using xhci_hcd
[451488.005496] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[451488.007743] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[451488.008742] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[451488.009001] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c063
[451488.009003] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[451488.009004] usb 1-1.2: Product: DELL USB Laser Mouse
[451488.009006] usb 1-1.2: Manufacturer: DELL
[451488.009150] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[451488.015224] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input58
[451488.015447] generic-usb 0003:046D:C063.004D: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:0d:00.0-1.2/input0
[451488.516383] usb 4-1.4: new high-speed USB device number 105 using ehci_hcd
[451488.614409] usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[451488.614412] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[451488.614413] usb 4-1.4: Product: F5521gw
[451488.614415] usb 4-1.4: Manufacturer: Lenovo
[451488.614416] usb 4-1.4: SerialNumber: 2BB9A781BC172640
[451488.649236] cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
[451488.651966] cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
[451488.660059] cdc_wdm 4-1.4:1.5: cdc-wdm-176: USB WDM device
[451488.679451] usb 4-1.4: MAC-Address: 0x02:0x80:0x37:0xec:0x02:0x00
[451488.680651] cdc_ncm 4-1.4:1.6: usb0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, CDC NCM, 02:80:37:ec:02:00
[451488.681772] cdc_wdm 4-1.4:1.8: cdc-wdm-175: USB WDM device
[451488.682388] cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
[451488.682645] ADDRCONF(NETDEV_UP): usb0: link is not ready
[451488.688765] cdc_ncm: usb0: network connection: disconnected
[451489.933479] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[465461.431014] usb 1-1.4: new high-speed USB device number 24 using xhci_hcd
[465461.449113] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.449456] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.449831] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.450214] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.450343] usb 1-1.4: New USB device found, idVendor=04e8, idProduct=6860
[465461.450346] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[465461.450349] usb 1-1.4: Product: Galaxy Nexus
[465461.450351] usb 1-1.4: Manufacturer: samsung
[465461.450352] usb 1-1.4: SerialNumber: 01498B2B0B015002
[465461.450541] usb 1-1.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[465461.450546] usb 1-1.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[465461.450549] usb 1-1.4: ep 0x83 - rounding interval to 32768 microframes, ep desc says 0 microframes
[465461.450552] usb 1-1.4: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[465461.452085] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.920709] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[465461.921079] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep
[466884.476416] usb 4-1.2: new full-speed USB device number 106 using ehci_hcd
[466884.572361] usb 4-1.2: New USB device found, idVendor=1395, idProduct=0020
[466884.572366] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[466884.572369] usb 4-1.2: Product: Sennheiser USB headset
[466884.572371] usb 4-1.2: Manufacturer: Sennheiser Communications A/S
[466884.593202] input: Sennheiser Communications A/S Sennheiser USB headset as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.3/input/input59
[466884.593548] generic-usb 0003:1395:0020.004E: input,hiddev0,hidraw1: USB HID v1.11 Device [Sennheiser Communications A/S Sennheiser USB headset] on usb-0000:00:1d.0-1.2/input3
[466884.607163] snd_rawmidi: Unknown symbol snd_card_unref (err 0)
[467128.423857] usb 4-1.2: USB disconnect, device number 106
[467158.396764] snd_rawmidi: Unknown symbol snd_card_unref (err 0)

** Model information
sys_vendor: LENOVO
product_name: 4174WU1
product_version: ThinkPad T420s
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 8CET51WW (1.31 )
board_vendor: LENOVO
board_name: 4174WU1
board_version: Not Available

** Loaded modules:
snd_seq_device
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
ufs
qnx4
hfsplus
hfs
minix
ntfs
msdos
jfs
xfs
reiserfs
ext3
jbd
nls_cp437
vfat
fat
ext2
nls_utf8
isofs
nfnetlink_log
nfnetlink
sha256_generic
usb_storage
uas
tun
rfcomm
bnep
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
binfmt_misc
uinput
fuse
ecryptfs
dm_crypt
dm_mod
kvm_intel
kvm
snd_hda_codec_hdmi
snd_hda_codec_conexant
joydev
uvcvideo
videodev
v4l2_compat_ioctl32
media
cdc_ncm
usbnet
mii
cdc_wdm
cdc_acm
arc4
thinkpad_acpi
nvram
btusb
bluetooth
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
iwlwifi
mac80211
iTCO_wdt
snd_pcm
iTCO_vendor_support
cfg80211
psmouse
coretemp
evdev
serio_raw
pcspkr
i915
i2c_i801
snd_page_alloc
snd_timer
snd
drm_kms_helper
rfkill
soundcore
drm
battery
i2c_algo_bit
i2c_core
ac
power_supply
acpi_cpufreq
wmi
mperf
video
button
processor
ext4
crc16
jbd2
mbcache
btrfs
libcrc32c
zlib_deflate
usbhid
hid
sg
sr_mod
cdrom
sd_mod
crc_t10dif
xhci_hcd
crc32c_intel
ghash_clmulni_intel
ahci
libahci
aesni_intel
thermal
thermal_sys
ehci_hcd
aes_x86_64
libata
scsi_mod
aes_generic
cryptd
usbcore
e1000e
sdhci_pci
sdhci
usb_common
mmc_core

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 50
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f1625000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f1600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f162b000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 4080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f162a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 51
	Region 0: Memory at f1620000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f1500000-f15fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f0d00000-f14fffff
	Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	Memory behind bridge: f0c00000-f0cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f1629000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 48
	Region 0: I/O ports at 40a8 [size=8]
	Region 1: I/O ports at 40b4 [size=4]
	Region 2: I/O ports at 40a0 [size=8]
	Region 3: I/O ports at 40b0 [size=4]
	Region 4: I/O ports at 4060 [size=32]
	Region 5: Memory at f1628000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f1624000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 49
	Region 0: Memory at f1500000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

05:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller [1180:e823] (rev 07)
	Subsystem: Lenovo Device [17aa:21d2]
	Physical Slot: 1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

0d:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Lenovo Device [17aa:21d2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 005: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera
Bus 001 Device 022: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 023: ID 046d:c063 Logitech, Inc. DELL Laser Mouse
Bus 004 Device 105: ID 0bdb:1911 Ericsson Business Mobile Networks BV 
Bus 001 Device 024: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-P7500 [Galaxy Tab 10.1]


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.48
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                2:4.06+dfsg-3
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36
pn  firmware-libertas       <none>
ii  firmware-linux          0.36
ii  firmware-linux-nonfree  0.36
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:

--- End Message ---
--- Begin Message --- 
On Tue, 2012-12-11 at 16:27 +0100, M. Dietrich wrote:
> Package: src:linux
> Version: 3.2.35-1
> Severity: normal
> 
> loading of snd-usb-audio fails with errormessage
> 
> 	snd_rawmidi: Unknown symbol snd_card_unref (err 0)
[...]

You need to reboot after the upgrade.

Ben.

-- 
Ben Hutchings
Theory and practice are closer in theory than in practice.
                                - John Levine, moderator of comp.compilers

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: