Bug#693934: linux-image-3.2.0-4-amd64: Resume from Suspend-to-RAM doesn't work for some Acer laptops
Package: src:linux
Version: 3.2.32-1
Severity: normal
Tags: fixed-upstream patch
Forwarded: https://bugzilla.kernel.org/show_bug.cgi?id=15612
Dear Maintainer,
by default, suspend to RAM is malfunctioning on my Acer Aspire 3810T:
1) suspending seems to be performed correctly;
2) if you try to resume the laptop by pressing any key,
the LEDs, fans etc. seem to power on,
but the screen stays black and in <30 s. the system powers down.
A similar behavior (shutting down / rebooting instead of resuming)
has been reported for other Acer Timeline laptops.
WORKAROUND: use of the "i8042.reset=1" kernel parameter.
The bugfix has been merged upstream into Linux v3.3-rc1.
I propose to include the upstream patch
('i8042-reset-on-suspend.patch',
also titled "Automatically reset controller on S2R")
in the current Debian Linux 3.2 kernel.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=12345678-9abc-def0-1234-56789abcdef0 ro i8042.reset=1
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 11.043611] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 11.066364] iwlwifi 0000:01:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 11.066439] iwlwifi 0000:01:00.0: Device SKU: 0Xb0
[ 11.066539] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 11.350427] Linux media interface: v0.10
[ 11.411834] [drm] Initialized drm 1.1.0 20060810
[ 11.455943] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 11.455984] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 11.631575] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[ 11.654717] iwlwifi 0000:01:00.0: loaded firmware version 8.83.5.1 build 33692
[ 11.655099] Registered led device: phy0-led
[ 11.668064] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 11.674020] Linux video capture interface: v2.00
[ 11.787067] uvcvideo: Found UVC 1.00 device HD Video WebCam (064e:a133)
[ 11.795692] input: HD Video WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[ 11.795897] usbcore: registered new interface driver uvcvideo
[ 11.795969] USB Video Class driver (1.1.1)
[ 11.810895] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.021037] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.036449] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.036752] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.037645] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.037851] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.038821] i915 0000:00:02.0: setting latency timer to 64
[ 12.122434] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 12.122444] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.122519] [drm] Driver supports precise vblank timestamp query.
[ 12.122650] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.543304] cfg80211: World regulatory domain updated:
[ 12.543379] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.543469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.543558] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.543647] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.543735] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.543824] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.677266] fbcon: inteldrmfb (fb0) is primary device
[ 12.948538] Console: switching to colour frame buffer device 170x48
[ 12.954778] fb0: inteldrmfb frame buffer device
[ 12.954823] drm: registered panic notifier
[ 12.957050] acpi device:03: registered as cooling_device2
[ 12.957362] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 12.957528] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 12.957744] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.396770] Adding 4198388k swap on /dev/sda8. Priority:-1 extents:1 across:4198388k
[ 15.429393] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 16.102100] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.306490] loop: module loaded
[ 29.829217] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 32.431369] RPC: Registered named UNIX socket transport module.
[ 32.435057] RPC: Registered udp transport module.
[ 32.439120] RPC: Registered tcp transport module.
[ 32.443052] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.519595] FS-Cache: Loaded
[ 32.611997] FS-Cache: Netfs 'nfs' registered for caching
[ 32.673902] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 35.837519] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 40.341637] Bluetooth: Core ver 2.16
[ 40.343967] NET: Registered protocol family 31
[ 40.346090] Bluetooth: HCI device and connection manager initialized
[ 40.348163] Bluetooth: HCI socket layer initialized
[ 40.350149] Bluetooth: L2CAP socket layer initialized
[ 40.352306] Bluetooth: SCO socket layer initialized
[ 40.384675] Bluetooth: RFCOMM TTY layer initialized
[ 40.386703] Bluetooth: RFCOMM socket layer initialized
[ 40.388748] Bluetooth: RFCOMM ver 1.11
[ 40.726150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.728117] Bluetooth: BNEP filters: protocol multicast
[ 40.846912] lp: driver loaded but no devices found
[ 40.886255] ppdev: user-space parallel port driver
[ 43.736547] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 43.740266] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 43.857215] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 43.860312] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 43.908636] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.916903] atl1c 0000:02:00.0: irq 46 for MSI/MSI-X
[ 43.977332] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.130396] vboxdrv: Found 2 processor cores.
[ 45.130557] vboxdrv: fAsync=0 offMin=0x193 offMax=0x85b
[ 45.130652] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 45.130656] vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
[ 45.615577] vboxpci: IOMMU not found (not registered)
[ 50.570507] wlan0: authenticate with 02:1b:11:75:fb:06 (try 1)
[ 50.573366] wlan0: authenticated
[ 50.579288] wlan0: waiting for beacon from 02:1b:11:75:fb:06
[ 50.601975] wlan0: beacon received
[ 50.604802] wlan0: associate with 02:1b:11:75:fb:06 (try 1)
[ 50.608629] wlan0: RX AssocResp from 02:1b:11:75:fb:06 (capab=0x431 status=0 aid=1)
[ 50.608634] wlan0: associated
[ 50.619809] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 61.672247] wlan0: no IPv6 routers present
[ 74.099026] fuse init (API version 7.17)
[ 93.180793] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 93.180828] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 93.180855] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 93.393474] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 93.393497] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 93.393514] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 345.551580] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x00000000FFFFFFFE) is beyond end of object (20110623/exoparg2-418)
[ 345.551615] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.AINT] (Node ffff88013ae7ca88), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[ 345.551640] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC0_._Q72] (Node ffff88013ae81e70), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
** Model information
sys_vendor: Acer
product_name: Aspire 3810T
product_version: V1.28
chassis_vendor: Acer
chassis_version: None
bios_vendor: Acer
bios_version: V1.28
board_vendor: Acer
board_name: Aspire 3810T
board_version: PSMBOU-1234567
** Loaded modules:
fuse
cryptd
aes_x86_64
aes_generic
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
parport_pc
ppdev
bnep
lp
parport
rfcomm
bluetooth
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
snd_hrtimer
binfmt_misc
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
kvm_intel
kvm
snd_hda_codec_hdmi
arc4
joydev
snd_hda_codec_realtek
uvcvideo
i915
videodev
drm_kms_helper
v4l2_compat_ioctl32
snd_hda_intel
snd_hda_codec
drm
media
snd_hwdep
i2c_i801
i2c_algo_bit
i2c_core
snd_pcm_oss
snd_mixer_oss
snd_pcm
iwlwifi
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
iTCO_wdt
psmouse
acpi_cpufreq
mperf
iTCO_vendor_support
battery
ac
coretemp
snd_rawmidi
power_supply
evdev
serio_raw
snd_seq
mac80211
acer_wmi
sparse_keymap
pcspkr
wmi
snd_seq_device
cfg80211
rfkill
snd_timer
snd
button
video
processor
soundcore
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
uhci_hcd
thermal
thermal_sys
ahci
libahci
libata
ehci_hcd
atl1c
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at e4505c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e3500000-e44fffff
Prefetchable memory behind bridge: 00000000e0400000-00000000e13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2500000-e34fffff
Prefetchable memory behind bridge: 00000000e1400000-00000000e23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 30a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e4505800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 3108 [size=8]
Region 1: I/O ports at 311c [size=4]
Region 2: I/O ports at 3100 [size=8]
Region 3: I/O ports at 3118 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at e4505000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4506000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e4504000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 ABG [8086:1306]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e3500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Acer Incorporated [ALI] Device [1025:0229]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e2500000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 1000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a133 Suyin Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 2:4.05+dfsg-6
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: