Bug#692361: linux-image-3.6-trunk-amd64: ACPI display backlight brightness is set to zero at every boot-up
Package: src:linux
Version: 3.6.4-1~experimental.1
Severity: normal
Tags: upstream
Dear Maintainer,
everytime I boot, my notebook's display stays black since kernel linux-
image-3.6-amd64. I'm using an external display most of the time and so I found
out that the backlight brightness in GNOME settings is set to zero – I can
solve the problem by increasing the screen brightness but at the next boot this
setting will be lost, screen brightness is set to zero again. Since my media-
keys to change screen brightness don't work for now (see bug #683777) I
wouldn't be able to change the setting without an external display. As
described in bug #681743, setting the kernel boot parameter
i915.invert_brightness=1 works fine as workaround.
I looked into /sys/class/backlight/acpi_video0/brightness to confirm that it's
set to zero and realized that I have two entries in backlight: 'acpi_video0'
(with brightness set to 0, actual_brightness is 0) and 'intel_backlight' (with
brightness set to 4882, actual_brightness is 0). When I increase screen
brightness to 100% in GNOME settings, the values change to: 'acpi_video0'
brightness & actual_brightness 10; 'intel_backlight' brightness &
actual_brightness 4882.
Since I didn't encounter this problem before linux-image-3.6-trunk-amd64 I had
a look at these settings on linux-image-3.2.0-4-amd64 with normal backlight
brightness: 'acpi_video0' (brightness 0, actual_brightness 0),
'intel_backlight' (brightness 4882, actual_brightness 4882). So the difference
between 3.2 and 3.6 seems to be that backlight brightness wasn't controlled by
the ACPI driver but the device specific driver in 3.2.
I tested this with vanilla kernel 3.6.4 and can confirm that this is an
upstream bug. I suppose this bug report is a duplicate of #681743 but since I'm
seeing this on another notebook (HP Folio 13-2000) than the original reporter
Jonathan Nieder asked me to open a new report.
Please tell me if you need more information.
-- Package-specific info:
** Version:
Linux version 3.6-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Debian 3.6.4-1~experimental.1
** Command line:
BOOT_IMAGE=/vmlinuz-3.6-trunk-amd64 root=/dev/mapper/rosa-root ro quiet splash
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 10.154473] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.170809] iTCO_vendor_support: vendor-support=0
[ 10.174866] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.174915] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.175439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.186166] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 10.211152] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 10.211575] usbcore: registered new interface driver uvcvideo
[ 10.211577] USB Video Class driver (1.1.1)
[ 10.214850] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 10.214853] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 10.214872] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.214875] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.214876] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.214878] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.214880] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[ 10.214882] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 10.215001] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 10.230647] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 10.230651] iwlwifi 0000:02:00.0: Device SKU: 0x150
[ 10.230654] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 10.230745] Registered led device: phy0-led
[ 10.243258] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.245943] cfg80211: World regulatory domain updated:
[ 10.245947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.245951] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.245954] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.245957] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.245959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.245962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.435400] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 10.524024] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 10.655051] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 10.784579] fbcon: inteldrmfb (fb0) is primary device
[ 10.834902] rts_pstor: device scan complete
[ 10.835282] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 10.835772] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 10.836241] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.141266] Console: switching to colour frame buffer device 170x48
[ 11.152635] fb0: inteldrmfb frame buffer device
[ 11.152639] drm: registered panic notifier
[ 11.160390] acpi device:33: registered as cooling_device6
[ 11.160767] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.160823] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 11.160900] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.161056] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 11.711981] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 11.735365] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.735688] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.735878] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.031185] kvm: disabled by bios
[ 12.065107] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2031, fw id: 988796
[ 12.184228] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 12.217440] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 12.292486] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 12.491722] loop: module loaded
[ 12.507684] usbcore: registered new interface driver usblp
[ 13.151923] Adding 4624380k swap on /dev/mapper/rosa-swap_1. Priority:-1 extents:1 across:4624380k SS
[ 13.382873] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.920145] RPC: Registered named UNIX socket transport module.
[ 13.920154] RPC: Registered udp transport module.
[ 13.920157] RPC: Registered tcp transport module.
[ 13.920160] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.928984] FS-Cache: Loaded
[ 13.930450] Key type dns_resolver registered
[ 13.941860] FS-Cache: Netfs 'nfs' registered for caching
[ 13.959952] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.066568] Bluetooth: RFCOMM TTY layer initialized
[ 15.066577] Bluetooth: RFCOMM socket layer initialized
[ 15.066579] Bluetooth: RFCOMM ver 1.11
[ 15.068042] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.068046] Bluetooth: BNEP filters: protocol multicast
[ 15.127344] lp: driver loaded but no devices found
[ 15.132469] ppdev: user-space parallel port driver
[ 15.401616] r8169 0000:01:00.0: eth0: link down
[ 15.401674] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.404528] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 15.411214] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 15.497916] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 15.504600] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 15.590176] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.807463] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 15.837957] Ebtables v2.0 registered
[ 15.860733] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.872815] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.811502] wlan0: authenticate with f4:9f:54:57:d6:62
[ 16.839918] wlan0: send auth to f4:9f:54:57:d6:62 (try 1/3)
[ 16.842950] wlan0: authenticated
[ 16.843286] iwlwifi 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
[ 16.846579] wlan0: associate with f4:9f:54:57:d6:62 (try 1/3)
[ 16.849036] wlan0: RX AssocResp from f4:9f:54:57:d6:62 (capab=0x411 status=0 aid=1)
[ 16.861907] wlan0: associated
[ 16.861991] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.570468] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 19.575556] hid-generic 0005:045E:0700.0001: unknown main item tag 0x0
[ 19.576144] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:38/input13
[ 19.576567] hid-generic 0005:045E:0700.0001: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01
[ 52.003270] hid-generic 0005:045E:0762.0002: unknown main item tag 0x0
[ 52.003621] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:36/input14
[ 52.004067] hid-generic 0005:045E:0762.0002: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Folio 13 - 2000 Notebook PC
product_version: 0687100400204A00000330100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.17
board_vendor: Hewlett-Packard
board_name: 1899
board_version: 46.80
** Loaded modules:
hid_generic
hidp
hid
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
usblp
loop
joydev
snd_hda_codec_hdmi
snd_hda_codec_idt
arc4
iwldvm
mac80211
iTCO_wdt
iTCO_vendor_support
snd_hda_intel
snd_hda_codec
snd_hwdep
uvcvideo
snd_pcm
i915
iwlwifi
snd_page_alloc
videobuf2_vmalloc
snd_seq
videobuf2_memops
snd_seq_device
videobuf2_core
snd_timer
videodev
psmouse
cfg80211
hp_wmi
acpi_cpufreq
drm_kms_helper
lpc_ich
btusb
media
bluetooth
coretemp
sparse_keymap
kvm
microcode
rts_pstor(C)
serio_raw
mperf
pcspkr
rfkill
evdev
drm
mfd_core
i2c_i801
snd
battery
i2c_algo_bit
soundcore
i2c_core
ac
wmi
video
tpm_tis
tpm
tpm_bios
processor
button
ext4
crc16
jbd2
mbcache
xts
gf128mul
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crc32c_intel
ghash_clmulni_intel
ahci
libahci
xhci_hcd
aesni_intel
ehci_hcd
r8169
aes_x86_64
libata
mii
scsi_mod
thermal
usbcore
usb_common
aes_generic
ablk_helper
cryptd
fan
thermal_sys
sdhci_pci
sdhci
mmc_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: Memory at c2704000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at c2700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: c2600000-c26fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c1600000-c25fffff
Prefetchable memory behind bridge: 00000000c0500000-00000000c14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: c1500000-c15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c2708000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at c2707000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c2705000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008b] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5315]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c1601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts_pstor
03:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at c1600000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.0 USB controller [0c03]: Fresco Logic Device [1b73:1009] (rev 02) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1899]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at c1510000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at c1511000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1bcf:2c07 Sunplus Innovation Technology Inc.
Bus 001 Device 004: ID 8086:0189 Intel Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.6-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.6-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.6-trunk-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.6-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.6 <none>
Versions of packages linux-image-3.6-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
* linux-image-3.6-trunk-amd64/postinst/missing-firmware-3.6-trunk-amd64:
linux-image-3.6-trunk-amd64/prerm/removing-running-kernel-3.6-trunk-amd64: true
linux-image-3.6-trunk-amd64/postinst/ignoring-ramdisk:
linux-image-3.6-trunk-amd64/postinst/depmod-error-initrd-3.6-trunk-amd64: false
Reply to: