Package: src:linux Version: 3.6.4-1~experimental.1 Severity: wishlist I've recently upgrade from 3.2 to 3.6. Since the upgrade after resuming from supsend-to-disk the screen starts to flicker and the kernel log contains the following traceback: [ 4730.108047] ------------[ cut here ]------------ [ 4730.108073] WARNING: at /build/buildd-linux_3.6.4-1~experimental.1-amd64-QnAy6j/linux-3.6.4/drivers/gpu/drm/i915/intel_display.c:1225 intel_crtc_disable+0x52/0x86 [i915]() [ 4730.108074] Hardware name: 7458WTH [ 4730.108076] pipe B assertion failure (expected off, current on) [ 4730.108125] Modules linked in: <snap> [ 4730.108161] Pid: 12434, comm: kworker/u:6 Not tainted 3.6-trunk-amd64 #1 Debian 3.6.4-1~experimental.1 [ 4730.108167] Call Trace: [ 4730.108173] [<ffffffff8103caa3>] ? warn_slowpath_common+0x78/0x8c [ 4730.108176] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108178] [<ffffffff8103cb4f>] ? warn_slowpath_fmt+0x45/0x4a [ 4730.108180] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108189] [<ffffffffa04dfcfc>] ? intel_crtc_disable+0x52/0x86 [i915] [ 4730.108192] [<ffffffffa042fe47>] ? drm_helper_disable_unused_functions+0xd0/0xfb [drm_kms_helper] [ 4730.108195] [<ffffffffa043061e>] ? drm_helper_resume_force_mode+0xf1/0xff [drm_kms_helper] [ 4730.108197] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108203] [<ffffffffa04be17f>] ? i915_drm_thaw+0xd4/0x10b [i915] [ 4730.108208] [<ffffffffa04be501>] ? i915_resume+0x3b/0x50 [i915] [ 4730.108212] [<ffffffff811d607d>] ? pci_legacy_resume+0x39/0x39 [ 4730.108214] [<ffffffff8126bac3>] ? dpm_run_callback.isra.5+0x26/0x54 [ 4730.108216] [<ffffffff8126c3aa>] ? device_resume+0xd0/0x110 [ 4730.108218] [<ffffffff8126c3fe>] ? async_resume+0x14/0x38 [ 4730.108220] [<ffffffff8105c412>] ? async_run_entry_fn+0x9d/0x174 [ 4730.108222] [<ffffffff81052bfd>] ? process_one_work+0x17e/0x29d [ 4730.108224] [<ffffffff810538ec>] ? worker_thread+0x1fe/0x29f [ 4730.108226] [<ffffffff810536ee>] ? manage_workers+0x223/0x223 [ 4730.108227] [<ffffffff810536ee>] ? manage_workers+0x223/0x223 [ 4730.108229] [<ffffffff81056d51>] ? kthread+0x67/0x6f [ 4730.108232] [<ffffffff81370604>] ? kernel_thread_helper+0x4/0x10 [ 4730.108233] [<ffffffff81056cea>] ? kthread_freezable_should_stop+0x3c/0x3c [ 4730.108235] [<ffffffff81370600>] ? gs_change+0x13/0x13 [ 4730.108236] ---[ end trace 9da7aea57c4d16f6 ]--- After a reboot everything works fine again. If you need any more information, please feal free to ask. Kind regards -- Package-specific info: ** Version: Linux version 3.6-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Debian 3.6.4-1~experimental.1 ** Command line: BOOT_IMAGE=/vmlinuz-3.6-trunk-amd64 root=/dev/mapper/mercury2-root ro resume=/dev/mapper/mercury2-swap acpi_sleep=s3_bios ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 4729.541111] usb usb8: root hub lost power or was reset [ 4729.541126] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4729.541143] usb usb2: root hub lost power or was reset [ 4729.542793] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 4729.542804] pci 0000:00:1e.0: setting latency timer to 64 [ 4729.542820] ahci 0000:00:1f.2: setting latency timer to 64 [ 4729.542846] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 4729.544456] dpm_run_callback(): pnp_bus_resume+0x0/0x62 returns -19 [ 4729.544457] PM: Device 00:0a failed to restore: error -19 [ 4729.545458] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 4729.547182] Extended CMOS year: 2000 [ 4729.860042] ata2: SATA link down (SStatus 0 SControl 300) [ 4729.860070] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4729.861890] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4729.861893] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4729.861960] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 4729.861962] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4729.913721] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4729.913724] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4729.913819] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 4729.913822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4729.916402] ata1.00: configured for UDMA/133 [ 4729.932170] sd 0:0:0:0: [sda] Starting disk [ 4729.937887] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 4729.938301] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 [ 4730.008101] usb 1-6: reset high-speed USB device number 3 using ehci_hcd [ 4730.108047] ------------[ cut here ]------------ [ 4730.108073] WARNING: at /build/buildd-linux_3.6.4-1~experimental.1-amd64-QnAy6j/linux-3.6.4/drivers/gpu/drm/i915/intel_display.c:1225 intel_crtc_disable+0x52/0x86 [i915]() [ 4730.108074] Hardware name: 7458WTH [ 4730.108076] pipe B assertion failure (expected off, current on) [ 4730.108125] Modules linked in: cdc_ether usbnet mii cdc_wdm cdc_acm btusb cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative bnep rfcomm bluetooth crc16 input_polldev binfmt_misc uinput nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_LOG xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables ext2 mbcache loop fuse i915 uvcvideo videobuf2_vmalloc videobuf2_memops drm_kms_helper videobuf2_core videodev drm media snd_hda_codec_conexant arc4 i2c_algo_bit iwldvm mac80211 snd_hda_intel snd_hda_codec snd_hwdep coretemp ata_generic e1000e snd_pcm_oss snd_mixer_oss iTCO_wdt iTCO_vendor_support snd_pcm i2c_i801 iwlwifi thinkpad_acpi nvram snd_page_alloc snd_seq_midi snd_seq_midi_event uhci_hcd i2c_core ehci_hcd snd_rawmidi usbcore lpc_ich mfd_core snd_seq usb_common snd_seq_device snd_timer kvm_intel psmouse pcspkr serio_raw acpi_cpufreq snd kvm evdev cfg80211 rfkill mperf soundcore battery tpm_tis tpm tpm_bios ac video button wmi processor xfs sha256_generic ablk_helper cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif microcode ahci thermal libahci thermal_sys libata scsi_mod [ 4730.108161] Pid: 12434, comm: kworker/u:6 Not tainted 3.6-trunk-amd64 #1 Debian 3.6.4-1~experimental.1 [ 4730.108167] Call Trace: [ 4730.108173] [<ffffffff8103caa3>] ? warn_slowpath_common+0x78/0x8c [ 4730.108176] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108178] [<ffffffff8103cb4f>] ? warn_slowpath_fmt+0x45/0x4a [ 4730.108180] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108189] [<ffffffffa04dfcfc>] ? intel_crtc_disable+0x52/0x86 [i915] [ 4730.108192] [<ffffffffa042fe47>] ? drm_helper_disable_unused_functions+0xd0/0xfb [drm_kms_helper] [ 4730.108195] [<ffffffffa043061e>] ? drm_helper_resume_force_mode+0xf1/0xff [drm_kms_helper] [ 4730.108197] [<ffffffff8105c375>] ? async_schedule+0xc/0xc [ 4730.108203] [<ffffffffa04be17f>] ? i915_drm_thaw+0xd4/0x10b [i915] [ 4730.108208] [<ffffffffa04be501>] ? i915_resume+0x3b/0x50 [i915] [ 4730.108212] [<ffffffff811d607d>] ? pci_legacy_resume+0x39/0x39 [ 4730.108214] [<ffffffff8126bac3>] ? dpm_run_callback.isra.5+0x26/0x54 [ 4730.108216] [<ffffffff8126c3aa>] ? device_resume+0xd0/0x110 [ 4730.108218] [<ffffffff8126c3fe>] ? async_resume+0x14/0x38 [ 4730.108220] [<ffffffff8105c412>] ? async_run_entry_fn+0x9d/0x174 [ 4730.108222] [<ffffffff81052bfd>] ? process_one_work+0x17e/0x29d [ 4730.108224] [<ffffffff810538ec>] ? worker_thread+0x1fe/0x29f [ 4730.108226] [<ffffffff810536ee>] ? manage_workers+0x223/0x223 [ 4730.108227] [<ffffffff810536ee>] ? manage_workers+0x223/0x223 [ 4730.108229] [<ffffffff81056d51>] ? kthread+0x67/0x6f [ 4730.108232] [<ffffffff81370604>] ? kernel_thread_helper+0x4/0x10 [ 4730.108233] [<ffffffff81056cea>] ? kthread_freezable_should_stop+0x3c/0x3c [ 4730.108235] [<ffffffff81370600>] ? gs_change+0x13/0x13 [ 4730.108236] ---[ end trace 9da7aea57c4d16f6 ]--- [ 4730.252134] usb 4-2: reset full-speed USB device number 3 using uhci_hcd [ 4730.399296] btusb 4-2:1.0: no reset_resume for driver btusb? [ 4730.399298] btusb 4-2:1.1: no reset_resume for driver btusb? [ 4730.496138] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [ 4730.644335] PM: restore of devices complete after 1143.419 msecs [ 4730.727333] PM: Image restored successfully. [ 4730.727420] usb 2-4: USB disconnect, device number 2 [ 4730.727336] Restarting tasks ... done. [ 4730.734083] PM: Basic memory bitmaps freed [ 4730.737753] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device [ 4730.741384] video LNXVIDEO:00: Restoring backlight state [ 4735.428047] usb 2-4: new high-speed USB device number 3 using ehci_hcd [ 4736.289765] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 [ 4736.289772] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4736.289776] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device [ 4736.289779] usb 2-4: Manufacturer: Ericsson [ 4736.289782] usb 2-4: SerialNumber: 3541430223099830 [ 4736.299127] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 4736.336505] cdc_acm 2-4:1.3: ttyACM1: USB ACM device [ 4736.354479] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device [ 4736.358952] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device [ 4736.363591] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 4736.373130] cdc_acm 2-4:1.9: ttyACM2: USB ACM device [ 4738.563707] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 4738.564113] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 [ 4738.612874] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4738.946944] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 4739.048281] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 4739.048542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4739.178332] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 4739.178736] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 [ 4739.227429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4741.464166] wlan0: authenticate with b8:a3:86:5c:79:f0 [ 4741.467119] wlan0: send auth to b8:a3:86:5c:79:f0 (try 1/3) [ 4741.668054] wlan0: send auth to b8:a3:86:5c:79:f0 (try 2/3) [ 4741.872059] wlan0: send auth to b8:a3:86:5c:79:f0 (try 3/3) [ 4741.874542] wlan0: authenticated [ 4741.876056] wlan0: associate with b8:a3:86:5c:79:f0 (try 1/3) [ 4741.880161] wlan0: RX AssocResp from b8:a3:86:5c:79:f0 (capab=0x411 status=0 aid=2) [ 4741.882958] wlan0: associated ** Model information sys_vendor: LENOVO product_name: 7458WTH product_version: ThinkPad X200 chassis_vendor: LENOVO chassis_version: Not Available bios_vendor: LENOVO bios_version: 6DET40WW (2.04 ) board_vendor: LENOVO board_name: 7458WTH board_version: Not Available ** Loaded modules: cdc_ether usbnet mii cdc_wdm cdc_acm btusb cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative bnep rfcomm bluetooth crc16 input_polldev binfmt_misc uinput nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_LOG xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables ext2 mbcache loop fuse i915 uvcvideo videobuf2_vmalloc videobuf2_memops drm_kms_helper videobuf2_core videodev drm media snd_hda_codec_conexant arc4 i2c_algo_bit iwldvm mac80211 snd_hda_intel snd_hda_codec snd_hwdep coretemp ata_generic e1000e snd_pcm_oss snd_mixer_oss iTCO_wdt iTCO_vendor_support snd_pcm i2c_i801 iwlwifi thinkpad_acpi nvram snd_page_alloc snd_seq_midi snd_seq_midi_event uhci_hcd i2c_core ehci_hcd snd_rawmidi usbcore lpc_ich mfd_core snd_seq usb_common snd_seq_device snd_timer kvm_intel psmouse pcspkr serio_raw acpi_cpufreq snd kvm evdev cfg80211 rfkill mperf soundcore battery tpm_tis tpm tpm_bios ac video button wmi processor xfs sha256_generic ablk_helper cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif microcode ahci thermal libahci thermal_sys libata scsi_mod ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Lenovo Device [17aa:20e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:20e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) Subsystem: Lenovo Device [17aa:20e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07) Subsystem: Lenovo Device [17aa:20e6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO]) Subsystem: Lenovo Device [17aa:20ea] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1828 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1820 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 1810 [size=16] Capabilities: <access denied> Kernel driver in use: ata_generic 00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550]) Subsystem: Lenovo Device [17aa:20ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1830 [size=8] Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1840 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:20f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Lenovo Device [17aa:20f2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 46 Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0000000-c01fffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f2500000-f25fffff Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 18c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 18e0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:20f0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1c00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:20f1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: Lenovo Device [17aa:20f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:20f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at 1c48 [size=8] Region 1: I/O ports at 183c [size=4] Region 2: I/O ports at 1c40 [size=8] Region 3: I/O ports at 1838 [size=4] Region 4: I/O ports at 1c20 [size=32] Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Lenovo Device [17aa:20f9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c60 [size=32] Kernel driver in use: i801_smbus 03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4236] Subsystem: Intel Corporation Device [8086:1011] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi ** USB devices: Bus 001 Device 003: ID 17ef:480c Lenovo Integrated Webcam Bus 002 Device 003: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (650, 'unstable'), (601, 'testing'), (600, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.6-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.6-trunk-amd64 depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.6-trunk-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.6-trunk-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-23.1 pn linux-doc-3.6 <none> Versions of packages linux-image-3.6-trunk-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36 pn firmware-libertas <none> ii firmware-linux 0.36 ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.6-trunk-amd64/postinst/missing-firmware-3.6-trunk-amd64: linux-image-3.6-trunk-amd64/prerm/removing-running-kernel-3.6-trunk-amd64: true linux-image-3.6-trunk-amd64/postinst/ignoring-ramdisk: linux-image-3.6-trunk-amd64/postinst/depmod-error-initrd-3.6-trunk-amd64: false -- Sebastian Ramacher
Attachment:
signature.asc
Description: Digital signature