[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#689420: Re: Linux does not boot on Intel Core i7-3720QM Processor (2.60GHz Turbo)



On Fri, 2012-11-02 at 02:53 +0400, jaakov jaakov wrote:
[...]
> Alas, "boot_delay=1000" does not slow down printing.

Sorry, I misunderstood where things were going wrong.  Apparently the
kernel itself is booting just fine, but things go wrong later in the
boot sequence.

> It just introduces a pause right after blanking the screen at boot,
> but before quickly printing pages of information.
> Thus, to get usable screenshots from a failing boot, I have to do some
> preparation.
> I have two kernels installed, one from testing
> (linux-image-3.2.0-3-amd64, version 3.2.23-1), and the other from
> unstable (linux-image-3.2.0-4-amd64, version 3.2.32-1).
> Both can be run with or without "acpi=off", with or without "quiet",
> with or without "elevator=noop" (currently used, since an SSD is
> inside), with or without "boot_delay=1000", normally or in a repair
> mode.
> 
> E. g., attached is a screenshot of a boot of kernel 3.2.0-4, with
> "acpi=off quiet elevator=noop".
> The machine in the state you see does not boot further but remains
> responsive to Ctrl+Alt+Del, which performs a reboot.
[...]

For further testing, please do not use acpi=off.  We need to make the
normal configuration work, and acpi=off may introduce new and different
problems!

The interesting thing I see there is the last boot progress message,
which is 'Enabling power management...'  Is this always the last line of
boot progress?

If so, please can you edit /etc/init.d/acpi-support, changing the first
line from:
    #!/bin/sh
to:
    #!/bin/sh -x
This should make it show the progress of this step in detail.  Then take
a new screenshot when the boot process hangs again.

Also, when the boot process is hung, please do this:
1. Hold down Alt.
2. Press PrtSc and then W.  This should produce the message 'SysRq :
Show Blocked State'.
3. Release Alt.

Assuming that the system log is still working at this point, on the next
successful boot you should find some debugging information in
/var/log/messages starting with the line 'SysRq : Show Blocked State'.
Please send that information.

Ben.

-- 
Ben Hutchings
I'm always amazed by the number of people who take up solipsism because
they heard someone else explain it. - E*Borg on alt.fan.pratchett

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: