Bug#689096: [wheezy] ipw2200 crashes on wakeup
On Tue, Oct 16, 2012 at 3:16 AM, Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> How reproducible was it with each kernel? Could you attach a log of
> the BUG (along with the corresponding boot-up sequence, if possible)
> from a 3.5.y kernel?
Hah, there I was thinking this would take a while to reproduce but it
just happened again. As for reproducibility, I think it happened much
more often with kernel 3.2 but then I could be wrong.
Attached you will find the output from dmesg after a fresh bootup as
well as the messages from an unsuccessful sleep-cycle.
One thing that I just remembered was that I manually set "roaming=0"
because I had connectivity issues with my AP (I frequently lost the
connection for a few seconds). I'll remove that option and see whether
it changes anything.
Please let me know if you need any further information.
cheers
--
Stefan Ott
http://www.ott.net/
"You are not Grey Squirrel?"
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5-trunk-686-pae (Debian 3.5.2-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Aug 20 04:55:13 UTC 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f6e0000-0x000000005f6f4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f6f5000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: IBM 25256NG/25256NG, BIOS 74ET64WW (2.09 ) 12/14/2006
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x019fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x377fffff] page 2M
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x379fdfff @ [mem 0x019f9000-0x019fffff]
[ 0.000000] RAMDISK: [mem 0x36154000-0x370a1fff]
[ 0.000000] ACPI: RSDP 000f6bf0 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 5f6e4765 0005C (v01 IBM TP-74 00002090 LTP 00000000)
[ 0.000000] ACPI: FACP 5f6e4800 000F4 (v03 IBM TP-74 00002090 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120320/tbfadt-548)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120320/tbfadt-579)
[ 0.000000] ACPI: DSDT 5f6e49e7 10397 (v01 IBM TP-74 00002090 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5f6f6000 00040
[ 0.000000] ACPI: SSDT 5f6e49b4 00033 (v01 IBM TP-74 00002090 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 5f6f4d7e 00052 (v01 IBM TP-74 00002090 IBM 00000001)
[ 0.000000] ACPI: TCPA 5f6f4dd0 00032 (v01 IBM TP-74 00002090 PTL 00000001)
[ 0.000000] ACPI: APIC 5f6f4e02 0005A (v01 IBM TP-74 00002090 IBM 00000001)
[ 0.000000] ACPI: MCFG 5f6f4e5c 0003C (v01 IBM TP-74 00002090 IBM 00000001)
[ 0.000000] ACPI: BOOT 5f6f4fd8 00028 (v01 IBM TP-74 00002090 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 636MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0x5f6dffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f6dffff]
[ 0.000000] On node 0 totalpages: 390767
[ 0.000000] free_area_init_node: node 0, pgdat c1431d40, node_mem_map f5564200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1274 pages used for memmap
[ 0.000000] HighMem zone: 161768 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e6000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387713
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5-trunk-686-pae root=UUID=88262002-52a8-49fa-ab66-637759ec0159 ro acpi_sleep=s3_bios splash quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0005f6e0)
[ 0.000000] Memory: 1528924k/1563520k available (2909k kernel code, 34144k reserved, 1417k data, 420k init, 652168k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc143a000 - 0xc14a3000 ( 420 kB)
[ 0.000000] .data : 0xc12d74a0 - 0xc1439980 (1417 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d74a0 (2909 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1496.253 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.50 BogoMIPS (lpj=5985012)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004062] Security Framework initialized
[ 0.004070] AppArmor: AppArmor disabled by boot time parameter
[ 0.004088] Mount-cache hash table entries: 512
[ 0.004413] Initializing cgroup subsys cpuacct
[ 0.004417] Initializing cgroup subsys memory
[ 0.004430] Initializing cgroup subsys devices
[ 0.004433] Initializing cgroup subsys freezer
[ 0.004436] Initializing cgroup subsys net_cls
[ 0.004440] Initializing cgroup subsys blkio
[ 0.004445] Initializing cgroup subsys perf_event
[ 0.004481] Disabled fast string operations
[ 0.004492] mce: CPU supports 5 MCE banks
[ 0.004503] CPU0: Thermal monitoring enabled (TM2)
[ 0.004581] SMP alternatives: switching to UP code
[ 0.009853] Freeing SMP alternatives: 8k freed
[ 0.009859] ACPI: Core revision 20120320
[ 0.020068] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061087] CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
[ 0.064003] Performance Events: p6 PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 32
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 00000000ffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 0000000000000003
[ 0.064003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064003] Brought up 1 CPUs
[ 0.064003] Total of 1 processors activated (2992.50 BogoMIPS).
[ 0.064003] devtmpfs: initialized
[ 0.064003] PM: Registering ACPI NVS region [mem 0x5f6f5000-0x5f6fffff] (45056 bytes)
[ 0.064003] dummy:
[ 0.064003] NET: Registered protocol family 16
[ 0.064003] ACPI: bus type pci registered
[ 0.064003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064003] PCI: Using MMCONFIG for extended config space
[ 0.064003] PCI: Using configuration type 1 for base access
[ 0.064003] bio: create slab <bio-0> at 0
[ 0.064003] ACPI: Added _OSI(Module Device)
[ 0.064003] ACPI: Added _OSI(Processor Device)
[ 0.064003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.064003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.065753] ACPI: EC: EC description table is found, configuring boot EC
[ 0.207104] ACPI: Interpreter enabled
[ 0.207114] ACPI: (supports S0 S3 S4 S5)
[ 0.207146] ACPI: Using IOAPIC for interrupt routing
[ 0.209381] ACPI: Power Resource [PUBS] (on)
[ 0.216287] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.217416] ACPI: ACPI Dock Station Driver: 5 docks/bays found
[ 0.217425] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.217457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217493] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.217498] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.217502] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.217507] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.217511] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.217516] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.217520] PCI: root bus 00: using default resources
[ 0.217569] PCI host bridge to bus 0000:00
[ 0.217574] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.217578] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.217594] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.217654] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.217669] pci 0000:00:02.0: reg 10: [mem 0xa0080000-0xa00fffff]
[ 0.217678] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.217687] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.217695] pci 0000:00:02.0: reg 1c: [mem 0xa0000000-0xa003ffff]
[ 0.217740] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.217752] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[ 0.217861] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.217977] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218022] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.218081] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.218128] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.218187] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.218234] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.218293] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.218340] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.218399] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.220038] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.220064] pci 0000:00:1d.7: reg 10: [mem 0xa0040000-0xa00403ff]
[ 0.220176] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.220206] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.220306] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.220329] pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff]
[ 0.220343] pci 0000:00:1e.2: reg 14: [io 0x18c0-0x18ff]
[ 0.220358] pci 0000:00:1e.2: reg 18: [mem 0xa0040800-0xa00409ff]
[ 0.220371] pci 0000:00:1e.2: reg 1c: [mem 0xa0040400-0xa00404ff]
[ 0.220438] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.220469] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.220590] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.220602] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.220611] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.220617] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.220622] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15c0-15cf
[ 0.220654] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.220676] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.220690] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.220704] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.220717] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.220731] pci 0000:00:1f.2: reg 20: [io 0x1810-0x181f]
[ 0.220790] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220813] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.220890] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.221034] pci 0000:02:00.0: [14e4:167d] type 00 class 0x020000
[ 0.221069] pci 0000:02:00.0: reg 10: [mem 0xa0100000-0xa010ffff 64bit]
[ 0.221242] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.221271] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.221286] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.221296] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.221353] pci 0000:04:00.0: [1180:0476] type 02 class 0x060700
[ 0.221387] pci 0000:04:00.0: reg 10: [mem 0xa0200000-0xa0200fff]
[ 0.221434] pci 0000:04:00.0: supports D1 D2
[ 0.221438] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221474] pci 0000:04:00.1: [1180:0822] type 00 class 0x080500
[ 0.221503] pci 0000:04:00.1: reg 10: [mem 0xa0201000-0xa02010ff]
[ 0.221630] pci 0000:04:00.1: supports D1 D2
[ 0.221633] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221680] pci 0000:04:02.0: [8086:4224] type 00 class 0x028000
[ 0.221710] pci 0000:04:02.0: reg 10: [mem 0xa0202000-0xa0202fff]
[ 0.221842] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 0.221915] pci 0000:00:1e.0: PCI bridge to [bus 04-07] (subtractive decode)
[ 0.221922] pci 0000:00:1e.0: bridge window [io 0x2000-0x5fff]
[ 0.221929] pci 0000:00:1e.0: bridge window [mem 0xa0200000-0xafffffff]
[ 0.221938] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.221942] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.221947] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.222021] pci_bus 0000:00: on NUMA node 0
[ 0.222026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.222165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.222230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.222353] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.222358] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.222360] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.227009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227124] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227236] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227349] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227460] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227572] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227794] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227929] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.227940] vgaarb: loaded
[ 0.227942] vgaarb: bridge control possible 0000:00:02.0
[ 0.228000] PCI: Using ACPI for IRQ routing
[ 0.238893] PCI: pci_cache_line_size set to 64 bytes
[ 0.238979] Expanded resource reserved due to conflict with Adapter ROM
[ 0.238985] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.238988] e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
[ 0.239347] hpet clockevent registered
[ 0.239353] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.239360] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.239366] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244059] Switching to clocksource hpet
[ 0.246578] pnp: PnP ACPI init
[ 0.246596] ACPI: bus type pnp registered
[ 0.247248] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.247253] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.247256] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.247260] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.247264] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.247267] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.247274] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.247278] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.247282] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.247286] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.247289] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.247293] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.247297] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.247300] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.247304] pnp 00:00: [mem 0x00100000-0x5fffffff]
[ 0.247308] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.247385] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.247390] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.247395] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.247399] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.247404] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.247409] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.247414] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.247418] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.247423] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.247428] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.247433] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.247437] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.247442] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.247447] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.247453] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.247487] pnp 00:01: [bus 00-ff]
[ 0.247491] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.247495] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.247499] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.247503] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.247507] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.247511] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.247515] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.247519] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.247523] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.247527] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.247531] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.247534] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.247538] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.247542] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.247547] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.247551] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.247555] pnp 00:01: [mem 0x60000000-0xfebfffff window]
[ 0.247610] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.247665] pnp 00:02: [io 0x0010-0x001f]
[ 0.247669] pnp 00:02: [io 0x0090-0x009f]
[ 0.247673] pnp 00:02: [io 0x0024-0x0025]
[ 0.247676] pnp 00:02: [io 0x0028-0x0029]
[ 0.247679] pnp 00:02: [io 0x002c-0x002d]
[ 0.247683] pnp 00:02: [io 0x0030-0x0031]
[ 0.247686] pnp 00:02: [io 0x0034-0x0035]
[ 0.247690] pnp 00:02: [io 0x0038-0x0039]
[ 0.247693] pnp 00:02: [io 0x003c-0x003d]
[ 0.247697] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.247700] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.247704] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.247707] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.247711] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.247714] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.247718] pnp 00:02: [io 0x0050-0x0053]
[ 0.247721] pnp 00:02: [io 0x0072-0x0077]
[ 0.247724] pnp 00:02: [io 0x002e-0x002f]
[ 0.247728] pnp 00:02: [io 0x1000-0x107f]
[ 0.247732] pnp 00:02: [io 0x1180-0x11bf]
[ 0.247735] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.247739] pnp 00:02: [io 0x1600-0x162f]
[ 0.247742] pnp 00:02: [io 0x1632-0x167f]
[ 0.247745] pnp 00:02: [io 0x15c0-0x15df]
[ 0.247749] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.247753] pnp 00:02: [mem 0xf0008000-0xf000bfff]
[ 0.247757] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.247760] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.247764] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.247857] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.247864] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.247869] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.247873] system 00:02: [io 0x1600-0x162f] has been reserved
[ 0.247878] system 00:02: [io 0x1632-0x167f] has been reserved
[ 0.247883] system 00:02: [io 0x15c0-0x15df] has been reserved
[ 0.247888] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.247892] system 00:02: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.247897] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.247902] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.247907] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.247912] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247933] pnp 00:03: [io 0x0000-0x000f]
[ 0.247937] pnp 00:03: [io 0x0080-0x008f]
[ 0.247940] pnp 00:03: [io 0x00c0-0x00df]
[ 0.247944] pnp 00:03: [dma 4]
[ 0.247982] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.247999] pnp 00:04: [io 0x0061]
[ 0.248022] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.248038] pnp 00:05: [io 0x00f0]
[ 0.248052] pnp 00:05: [irq 13]
[ 0.248092] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.248108] pnp 00:06: [io 0x0070-0x0071]
[ 0.248115] pnp 00:06: [irq 8]
[ 0.248155] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.248170] pnp 00:07: [io 0x0060]
[ 0.248174] pnp 00:07: [io 0x0064]
[ 0.248181] pnp 00:07: [irq 1]
[ 0.248219] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.248237] pnp 00:08: [irq 12]
[ 0.248277] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.248555] pnp 00:09: [io 0x004e-0x004f]
[ 0.248559] pnp 00:09: [io 0x1630-0x1631]
[ 0.248601] pnp 00:09: Plug and Play ACPI device, IDs ATM1100 (active)
[ 0.249817] pnp: PnP ACPI: found 10 devices
[ 0.249820] ACPI: ACPI bus type pnp unregistered
[ 0.249823] PnPBIOS: Disabled by ACPI PNP
[ 0.286796] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.286804] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.286834] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.286839] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.286850] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60000000-0x601fffff 64bit pref]
[ 0.286856] pci 0000:00:02.1: BAR 0: assigned [mem 0x60200000-0x6027ffff]
[ 0.286865] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.286870] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.286875] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.286884] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]
[ 0.286891] pci 0000:00:1c.0: bridge window [mem 0x60000000-0x601fffff 64bit pref]
[ 0.286905] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.286909] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.286914] pci 0000:04:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.286918] pci 0000:04:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.286924] pci 0000:04:00.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
[ 0.286929] pci 0000:04:00.0: BAR 16: assigned [mem 0xa4000000-0xa7ffffff]
[ 0.286933] pci 0000:04:00.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.286937] pci 0000:04:00.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.286942] pci 0000:04:00.0: CardBus bridge to [bus 05-06]
[ 0.286946] pci 0000:04:00.0: bridge window [io 0x2000-0x20ff]
[ 0.286954] pci 0000:04:00.0: bridge window [io 0x2400-0x24ff]
[ 0.286962] pci 0000:04:00.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.286969] pci 0000:04:00.0: bridge window [mem 0xa4000000-0xa7ffffff]
[ 0.286977] pci 0000:00:1e.0: PCI bridge to [bus 04-07]
[ 0.286982] pci 0000:00:1e.0: bridge window [io 0x2000-0x5fff]
[ 0.286990] pci 0000:00:1e.0: bridge window [mem 0xa0200000-0xafffffff]
[ 0.286997] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.287032] pci 0000:00:1e.0: setting latency timer to 64
[ 0.287052] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.287056] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.287060] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.287064] pci_bus 0000:02: resource 1 [mem 0xa0100000-0xa01fffff]
[ 0.287068] pci_bus 0000:02: resource 2 [mem 0x60000000-0x601fffff 64bit pref]
[ 0.287072] pci_bus 0000:04: resource 0 [io 0x2000-0x5fff]
[ 0.287076] pci_bus 0000:04: resource 1 [mem 0xa0200000-0xafffffff]
[ 0.287080] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.287084] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.287088] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.287092] pci_bus 0000:05: resource 0 [io 0x2000-0x20ff]
[ 0.287095] pci_bus 0000:05: resource 1 [io 0x2400-0x24ff]
[ 0.287099] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.287103] pci_bus 0000:05: resource 3 [mem 0xa4000000-0xa7ffffff]
[ 0.287153] NET: Registered protocol family 2
[ 0.287243] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.287481] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.288623] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.289342] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.289345] TCP: reno registered
[ 0.289352] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.289380] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.289556] NET: Registered protocol family 1
[ 0.289590] pci 0000:00:02.0: Boot video device
[ 0.289618] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.289623] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.289658] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.289664] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.289771] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.289778] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.289860] PCI: CLS 32 bytes, default 64
[ 0.289939] Unpacking initramfs...
[ 0.971382] Freeing initrd memory: 15672k freed
[ 0.988644] Simple Boot Flag at 0x35 set to 0x1
[ 0.989202] audit: initializing netlink socket (disabled)
[ 0.989226] type=2000 audit(1350352041.984:1): initialized
[ 1.008659] highmem bounce pool size: 64 pages
[ 1.008668] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.009190] VFS: Disk quotas dquot_6.5.2
[ 1.009226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.009345] msgmni has been set to 1743
[ 1.009559] alg: No test for stdrng (krng)
[ 1.009587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.009591] io scheduler noop registered
[ 1.009594] io scheduler deadline registered
[ 1.009608] io scheduler cfq registered (default)
[ 1.009788] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.009905] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.009939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.009941] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.010420] intel_idle: does not run on family 6 model 13
[ 1.010460] GHES: HEST is not enabled!
[ 1.010478] isapnp: Scanning for PnP cards...
[ 1.364829] isapnp: No Plug & Play device found
[ 1.364908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.365472] Linux agpgart interface v0.103
[ 1.365580] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.365651] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.366681] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.366853] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.367062] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.373394] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.373405] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.373565] mousedev: PS/2 mouse device common for all mice
[ 1.373634] rtc_cmos 00:06: RTC can wake from S4
[ 1.373797] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.373831] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.373844] cpuidle: using governor ladder
[ 1.373846] cpuidle: using governor menu
[ 1.373887] drop_monitor: Initializing network drop monitor service
[ 1.374035] TCP: cubic registered
[ 1.374066] NET: Registered protocol family 10
[ 1.374349] mip6: Mobile IPv6
[ 1.374352] NET: Registered protocol family 17
[ 1.374370] Key type dns_resolver registered
[ 1.374443] Using IPI No-Shortcut mode
[ 1.374555] PM: Hibernation image not present or could not be loaded.
[ 1.374567] registered taskstats version 1
[ 1.375189] rtc_cmos 00:06: setting system clock to 2012-10-16 01:47:23 UTC (1350352043)
[ 1.375378] Freeing unused kernel memory: 420k freed
[ 1.375647] Write protecting the kernel text: 2912k
[ 1.375693] Write protecting the kernel read-only data: 1124k
[ 1.375695] NX-protecting the kernel data: 3232k
[ 1.378187] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.396228] udevd[46]: starting version 175
[ 1.435492] ACPI: bus type usb registered
[ 1.435542] usbcore: registered new interface driver usbfs
[ 1.435560] usbcore: registered new interface driver hub
[ 1.490909] sdhci: Secure Digital Host Controller Interface driver
[ 1.490914] sdhci: Copyright(c) Pierre Ossman
[ 1.491272] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:0822] (rev 13)
[ 1.492326] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.495872] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.496934] usbcore: registered new device driver usb
[ 1.497506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.497541] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.497548] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.497582] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.497587] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.497597] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.497636] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.501523] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.509629] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.522798] [drm] Initialized drm 1.1.0 20060810
[ 1.525243] ACPI: Lid Switch [LID]
[ 1.525380] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.525388] ACPI: Sleep Button [SLPB]
[ 1.525494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.525499] ACPI: Power Button [PWRF]
[ 1.525878] SCSI subsystem initialized
[ 1.537200] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.537295] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.551372] mmc0: no vmmc regulator found
[ 1.552382] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.552450] Registered led device: mmc0::
[ 1.553941] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xa0040000
[ 1.554757] libata version 3.00 loaded.
[ 1.561488] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.561496] ACPI: Thermal Zone [THM0] (53 C)
[ 1.564197] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.564272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.564277] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564282] usb usb1: Product: EHCI Host Controller
[ 1.564285] usb usb1: Manufacturer: Linux 3.5-trunk-686-pae ehci_hcd
[ 1.564289] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.564535] hub 1-0:1.0: USB hub found
[ 1.564543] hub 1-0:1.0: 8 ports detected
[ 1.564685] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.564690] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.564717] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.564722] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.564732] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.564783] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.564833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.564838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.564842] usb usb2: Product: UHCI Host Controller
[ 1.564845] usb usb2: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 1.564849] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.565027] hub 2-0:1.0: USB hub found
[ 1.565034] hub 2-0:1.0: 2 ports detected
[ 1.565122] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.565127] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.565140] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.565145] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.565153] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.565182] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.565229] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.565233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.565237] usb usb3: Product: UHCI Host Controller
[ 1.565241] usb usb3: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 1.565244] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.565385] hub 3-0:1.0: USB hub found
[ 1.565391] hub 3-0:1.0: 2 ports detected
[ 1.565484] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.565489] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.565497] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.565540] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.565586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.565590] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.565594] usb usb4: Product: UHCI Host Controller
[ 1.565598] usb usb4: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 1.565601] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.565742] hub 4-0:1.0: USB hub found
[ 1.565748] hub 4-0:1.0: 2 ports detected
[ 1.565853] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.565858] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.565866] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.565894] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.565938] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.565943] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.565947] usb usb5: Product: UHCI Host Controller
[ 1.565950] usb usb5: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 1.565954] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.566128] hub 5-0:1.0: USB hub found
[ 1.566134] hub 5-0:1.0: 2 ports detected
[ 1.566644] ahci 0000:00:1f.2: version 3.0
[ 1.566673] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.567346] ata_piix 0000:00:1f.2: version 2.13
[ 1.567361] ata_piix 0000:00:1f.2: MAP [
[ 1.567363] P0 P2 IDE IDE ]
[ 1.567414] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.584083] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[ 1.597379] scsi0 : ata_piix
[ 1.612501] scsi1 : ata_piix
[ 1.620659] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.634296] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.634303] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.634789] i915 0000:00:02.0: power state changed by ACPI to D0
[ 1.634796] i915 0000:00:02.0: power state changed by ACPI to D0
[ 1.635143] i915 0000:00:02.0: setting latency timer to 64
[ 1.636475] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.636480] [drm] Driver supports precise vblank timestamp query.
[ 1.636584] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.686442] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.755770] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.797818] ata1.00: ATA-6: HTC426060G9AT00, 00P3A0L2, max UDMA/100
[ 1.797823] ata1.00: 117210240 sectors, multi 16: LBA
[ 1.797827] ata1.00: applying bridge limits
[ 1.812862] ata1.00: configured for UDMA/100
[ 1.813031] scsi 0:0:0:0: Direct-Access ATA HTC426060G9AT00 00P3 PQ: 0 ANSI: 5
[ 1.829139] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.952560] [drm] initialized overlay support
[ 1.988020] Refined TSC clocksource calibration: 1496.249 MHz.
[ 1.988029] Switching to clocksource tsc
[ 2.237716] fbcon: inteldrmfb (fb0) is primary device
[ 2.252020] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.301374] Console: switching to colour frame buffer device 128x48
[ 2.306710] fb0: inteldrmfb frame buffer device
[ 2.306712] drm: registered panic notifier
[ 2.306722] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.316978] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.317050] sd 0:0:0:0: [sda] Write Protect is off
[ 2.317055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.317086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.320560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.426615] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[ 2.426623] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.426627] usb 4-2: Product: Biometric Coprocessor
[ 2.426631] usb 4-2: Manufacturer: STMicroelectronics
[ 2.462504] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.463949] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.926412] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4.938563] XFS (sda6): Mounting Filesystem
[ 5.070379] XFS (sda6): Ending clean mount
[ 7.204523] udevd[309]: starting version 175
[ 7.689241] ACPI: Requesting acpi_cpufreq
[ 7.708115] Marking TSC unstable due to TSC halts in idle
[ 7.708137] ACPI: acpi_idle registered with cpuidle
[ 7.735613] Switching to clocksource hpet
[ 7.778803] P-state transition latency capped at 20 uS
[ 7.817843] ACPI: AC Adapter [AC] (on-line)
[ 7.840790] ACPI: Battery Slot [BAT0] (battery present)
[ 7.885023] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.174750] intel_rng: FWH not detected
[ 8.349536] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 8.397067] yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0555]
[ 8.441885] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.513182] Non-volatile memory driver v1.3
[ 8.524849] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 8.524862] yenta_cardbus 0000:04:00.0: Socket status: 30000006
[ 8.524886] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x5fff]
[ 8.524898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x5fff:
[ 8.553728] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 8.553737] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.553743] thinkpad_acpi: ThinkPad BIOS 74ET64WW (2.09 ), EC 74HT27WW-1.02
[ 8.553750] thinkpad_acpi: IBM ThinkPad X41, model 25256NG
[ 8.559227] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 8.575164] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 8.576049] Registered led device: tpacpi::thinklight
[ 8.576329] Registered led device: tpacpi::power
[ 8.576591] Registered led device: tpacpi::standby
[ 8.584115] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.591532] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 8.526410] excluding 0x2000-0x20ff 0x2400-0x24ff
[ 8.595216] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xa0200000-0xafffffff]
[ 8.595223] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0200000-0xafffffff:
[ 8.595228] excluding 0xa0200000-0xa09fffff 0xa3a00000-0xa81fffff 0xafa00000-0xb01fffff
[ 8.595267] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 8.595272] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd7ffffff:
[ 8.595293] excluding 0xd0000000-0xd7ffffff
[ 8.599156] iTCO_vendor_support: vendor-support=0
[ 8.599821] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.599867] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 8.600617] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.755807] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff:
[ 8.757431] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.758770] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff:
[ 8.759539] clean.
[ 8.759593] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff:
[ 8.761189] excluding 0xcf8-0xcff
[ 8.761269] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 8.761292] excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 8.761380] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 8.761397] excluding 0x60000000-0x602fffff
[ 8.761494] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 8.762260] clean.
[ 8.818261] lib80211: common routines for IEEE802.11 drivers
[ 8.818271] lib80211_crypt: registered algorithm 'NULL'
[ 8.838079] cfg80211: Calling CRDA to update world regulatory domain
[ 8.848589] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.865163] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 8.883316] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 8.906920] libipw: 802.11 data/management/control stack, git-1.1.13
[ 8.906929] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 8.930452] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 8.930460] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 8.930749] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 9.123053] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
[ 9.836061] intel8x0_measure_ac97_clock: measured 55919 usecs (11 samples)
[ 9.836071] intel8x0: measured clock 196 rejected
[ 10.196074] intel8x0_measure_ac97_clock: measured 55913 usecs (2694 samples)
[ 10.196083] intel8x0: clocking to 48000
[ 11.256924] device-mapper: uevent: version 1.0.3
[ 11.258048] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 11.490785] Bluetooth: Core ver 2.16
[ 11.490824] NET: Registered protocol family 31
[ 11.490829] Bluetooth: HCI device and connection manager initialized
[ 11.491193] Bluetooth: HCI socket layer initialized
[ 11.491198] Bluetooth: L2CAP socket layer initialized
[ 11.491207] Bluetooth: SCO socket layer initialized
[ 11.534071] Bluetooth: RFCOMM TTY layer initialized
[ 11.534080] Bluetooth: RFCOMM socket layer initialized
[ 11.534082] Bluetooth: RFCOMM ver 1.11
[ 11.585093] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 16.646202] kjournald starting. Commit interval 5 seconds
[ 16.646560] EXT3-fs (sda1): using internal journal
[ 16.646569] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 16.806903] XFS (sda7): Mounting Filesystem
[ 17.169282] XFS (sda7): Ending clean mount
[ 17.253834] XFS (sda2): Mounting Filesystem
[ 17.422510] XFS (sda2): Ending clean mount
[ 17.514096] XFS (sda5): Mounting Filesystem
[ 17.681368] XFS (sda5): Ending clean mount
[ 21.054567] fuse init (API version 7.19)
[ 49.556448] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 49.556628] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[ 49.604094] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 49.604102] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 49.605672] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 49.605678] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 49.605694] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 49.645337] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 49.645346] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 49.645452] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 49.645457] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 49.645472] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 49.691857] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 121.188486] lib80211_crypt: registered algorithm 'CCMP'
[ 291.899826] PM: Syncing filesystems ... done.
[ 292.027710] PM: Preparing system for mem sleep
[ 292.040264] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 292.056098] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 292.072089] PM: Entering mem sleep
[ 292.072116] Suspending console(s) (use no_console_suspend to debug)
[ 292.072417] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 292.072593] sd 0:0:0:0: [sda] Stopping disk
[ 292.086264] wlan: Going into suspend...
[ 292.104051] i915 0000:00:02.0: power state changed by ACPI to D3
[ 292.600145] ipw2200: Firmware error detected. Restarting.
[ 292.600947] ACPI handle has no context!
[ 292.619563] PM: suspend of devices complete after 547.272 msecs
[ 292.619631] PM: late suspend of devices complete after 0.064 msecs
[ 292.619942] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 292.640483] ipw2200: Unable to load ucode: -22
[ 292.640497] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 292.640563] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 292.640646] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 292.640651] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D2
[ 292.640848] ipw2200: Unable to load firmware: -22
[ 292.640849] ipw2200: Failed to up device
[ 292.680026] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 292.680031] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
[ 292.680072] PM: noirq suspend of devices complete after 60.437 msecs
[ 292.680534] ACPI: Preparing to enter system sleep state S3
[ 292.912048] PM: Saving platform NVS memory
[ 292.912161] Disabling non-boot CPUs ...
[ 292.912198] Extended CMOS year: 2000
[ 292.912198] ACPI: Low-level resume complete
[ 292.912198] PM: Restoring platform NVS memory
[ 292.912198] Extended CMOS year: 2000
[ 292.912198] Force enabled HPET at resume
[ 292.912298] ACPI: Waking up from system sleep state S3
[ 293.368209] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.368213] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.408026] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 293.408031] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.408035] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.408040] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.408044] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.408103] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 293.408107] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.408111] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.408203] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 293.408262] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 293.408271] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 293.408276] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 293.424322] PM: noirq resume of devices complete after 56.277 msecs
[ 293.424438] PM: early resume of devices complete after 0.049 msecs
[ 293.424517] i915 0000:00:02.0: power state changed by ACPI to D0
[ 293.424545] i915 0000:00:02.0: power state changed by ACPI to D0
[ 293.424573] i915 0000:00:02.0: setting latency timer to 64
[ 293.444655] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.444659] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 293.444668] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 293.444694] usb usb2: root hub lost power or was reset
[ 293.444707] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.444710] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 293.444719] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 293.444744] usb usb3: root hub lost power or was reset
[ 293.444760] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 293.444784] usb usb4: root hub lost power or was reset
[ 293.444800] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 293.444825] usb usb5: root hub lost power or was reset
[ 293.444837] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 293.444842] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 293.444853] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 293.444880] pci 0000:00:1e.0: setting latency timer to 64
[ 293.444895] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 293.444929] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 293.444946] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 293.445956] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 293.445968] wlan: Coming out of suspend...
[ 293.446071] ------------[ cut here ]------------
[ 293.446079] WARNING: at /build/buildd-linux_3.5.2-1~experimental.1-i386-13ywDU/linux-3.5.2/drivers/base/firmware_class.c:597 request_firmware+0x3a/0xa2()
[ 293.446100] Hardware name: 25256NG
[ 293.446101] Modules linked in: cryptd aes_i586 aes_generic lib80211_crypt_ccmp cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative fuse ext3 mbcache jbd hidp hid rfcomm bluetooth crc16 dm_crypt dm_mod snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi ipw2200 libipw thinkpad_acpi snd_seq snd_seq_device snd_timer cfg80211 nvram rfkill iTCO_wdt iTCO_vendor_support lib80211 snd soundcore pcmcia lpc_ich ac97_bus mfd_core rng_core i2c_i801 microcode yenta_socket pcmcia_rsrc pcmcia_core psmouse serio_raw pcspkr battery ac acpi_cpufreq mperf evdev processor xfs sg sd_mod crc_t10dif ata_generic thermal i915 ata_piix ahci libahci video libata button i2c_algo_bit drm_kms_helper sdhci_pci sdhci mmc_core drm uhci_hcd ehci_hcd scsi_mod i2c_core thermal_sys usbcore usb_common [last unloaded: scsi_wait_scan]
[ 293.446213] Pid: 16, comm: kworker/0:1 Not tainted 3.5-trunk-686-pae #1
[ 293.446214] Call Trace:
[ 293.446217] [<c102d8fa>] ? warn_slowpath_common+0x68/0x79
[ 293.446223] [<c1208150>] ? request_firmware+0x3a/0xa2
[ 293.446228] [<c102d918>] ? warn_slowpath_null+0xd/0x10
[ 293.446232] [<c1208150>] ? request_firmware+0x3a/0xa2
[ 293.446236] [<f855efa4>] ? ipw_up+0xdd/0x1164 [ipw2200]
[ 293.446246] [<c12d12eb>] ? __schedule+0x44d/0x45d
[ 293.446253] [<c1049824>] ? should_resched+0x5/0x1e
[ 293.446258] [<f85601e1>] ? ipw_bg_up+0x1c/0x25 [ipw2200]
[ 293.446265] [<c10406b6>] ? process_one_work+0x112/0x1fa
[ 293.446269] [<f85601c5>] ? ipw_bg_adapter_restart+0x25/0x25 [ipw2200]
[ 293.446277] [<c1040f1f>] ? worker_thread+0xa9/0x122
[ 293.446280] [<c1040e76>] ? manage_workers.isra.24+0x13d/0x13d
[ 293.446283] [<c1043a78>] ? kthread+0x68/0x6d
[ 293.446287] [<c1043a10>] ? kthread_freezable_should_stop+0x37/0x37
[ 293.446291] [<c12d69be>] ? kernel_thread_helper+0x6/0x10
[ 293.446296] ---[ end trace c96b7936a51eec91 ]---
[ 293.446299] ipw2200 0000:04:02.0: firmware: ipw2200-bss.fw will not be loaded
[ 293.446302] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -11
[ 293.446304] ipw2200: Unable to load firmware: -11
[ 293.612474] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 293.612478] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 293.612481] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 293.612485] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 293.612651] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 293.628341] ata1.00: configured for UDMA/100
[ 293.628421] sd 0:0:0:0: [sda] Starting disk
[ 293.780075] usb 4-2: reset full-speed USB device number 2 using uhci_hcd
[ 294.457800] PM: resume of devices complete after 1033.358 msecs
[ 294.458300] PM: Finishing wakeup.
[ 294.458302] Restarting tasks ... done.
[ 294.471061] video LNXVIDEO:00: Restoring backlight state
[ 294.538740] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 294.643359] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 294.759193] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 294.832290] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 295.351175] ipw2200: No space for Tx
[ 295.351184] ipw2200: Failed to send POWER_MODE: Reason -16
[ 295.935016] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 295.938213] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
Reply to: