Bug#690284: linux-image-3.2.0-3-amd64: nVidia GF106 fails with KMS (nomodeset works)
Package: src:linux
Version: 3.2.23-1
Severity: important
Booting 3.2 on my HP EliteBook 8560w results in the screen no longer
updating during boot - it never switches out of text mode and the last
kernel output I see is:
[ 24.541348] [drm] nouveau 0000:01:00.0: unknown i2c port 51
[ 24.568538] [drm] nouveau 0000:01:00.0: unknown i2c port 51
[ 24.633963] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 24.634335] [drm] nouveau 0000:01:00.0: unknown i2c port 57
The machine boots otherwise and I can login over the network and shut it
down cleanly. Adding "nomodeset" to the kernel config lets it boot
successfully and use the vesa driver for X. Running with the
linux-trunk-3.4 image from experiement works fine (and I'm now on
linux-trunk-3.5 which works as well) with the X nouveau driver and KMS.
2.6.32 from squeeze didn't have support for this card so didn't even try
KMS and would thus boot to X with vesa without needing any changes to
the boot parameters.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 8560w
product_version: A0001C02
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68SVD Ver. F.22
board_vendor: Hewlett-Packard
board_name: 1631
board_version: KBC Version 01.39
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0000000-d20fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d2524000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d2500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d252a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2529000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at d2520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d2400000-d24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=23, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: cc000000-cfffffff
Prefetchable memory behind bridge: 00000000d2700000-00000000d28fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=24, subordinate=24, sec-latency=0
Memory behind bridge: d2300000-d23fffff
Prefetchable memory behind bridge: 00000000d2900000-00000000d29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=25, subordinate=25, sec-latency=0
Memory behind bridge: d2200000-d22fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=26, subordinate=26, sec-latency=0
Memory behind bridge: d2100000-d21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2528000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 56
Region 0: I/O ports at 5048 [size=8]
Region 1: I/O ports at 5054 [size=4]
Region 2: I/O ports at 5040 [size=8]
Region 3: I/O ports at 5050 [size=4]
Region 4: I/O ports at 5000 [size=32]
Region 5: Memory at d2527000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF106 [Quadro 2000M] [10de:0dda] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at c8000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at 4000 [size=128]
Expansion ROM at d2080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GF106 High Definition Audio Controller [10de:0be9] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
24:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d2300000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d2305000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
24:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d2304000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at d2900000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
24:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d2303000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
25:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at d2200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
26:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:1631]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d2100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 138a:003c Validity Sensors, Inc. VFS471 Fingerprint Reader
Bus 004 Device 003: ID 03f0:231d Hewlett-Packard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.5-trunk-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.108
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/thukpa-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000beebd000 (usable)
[ 0.000000] BIOS-e820: 00000000beebd000 - 00000000bf6bd000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bd000 - 00000000bf7bd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bd000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000043e000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 8560w/1631, BIOS 68SVD Ver. F.22 01/05/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x43e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask E00000000 write-back
[ 0.000000] 5 base 400000000 mask FC0000000 write-back
[ 0.000000] 6 base 43E000000 mask FFE000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000043e000000
[ 0.000000] 0100000000 - 043e000000 page 2M
[ 0.000000] kernel direct mapping tables up to 43e000000 @ beeab000-beebd000
[ 0.000000] RAMDISK: 368d8000 - 37464000
[ 0.000000] ACPI: RSDP 00000000000f2f60 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bf7fe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 1631 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7d4000 228E6 (v02 HPQOEM 1631 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000bf786000 00040
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 1631 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 1631 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 1631 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 1631 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7d1000 00266 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf7d0000 004FC (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[ 0.000000] ACPI: SLIC 00000000bf7cf000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7cc000 017E7 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf7cb000 00810 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf7ca000 009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: DMAR 00000000bf7c9000 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7f8000 000A5 (v32 HPQOEM 1631 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000043e000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000043e000000
[ 0.000000] NODE_DATA [000000043dffb000 - 000000043dffffff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042d600000-ffff88043b5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0043e000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000beebd
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x0043e000
[ 0.000000] On node 0 totalpages: 4181580
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 763638 pages, LIFO batch:31
[ 0.000000] Normal zone: 46480 pages used for memmap
[ 0.000000] Normal zone: 3353200 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000beebd000 - 00000000bf6bd000
[ 0.000000] PM: Registered nosave memory: 00000000bf6bd000 - 00000000bf7bd000
[ 0.000000] PM: Registered nosave memory: 00000000bf7bd000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
[ 0.000000] PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043dc00000 s82816 r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4120759
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=/dev/mapper/thukpa-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16409592k/17793024k available (3409k kernel code, 1066704k absent, 316728k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2494.419 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.83 BogoMIPS (lpj=9977676)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000041] Security Framework initialized
[ 0.000045] AppArmor: AppArmor disabled by boot time parameter
[ 0.001291] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004555] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005880] Mount-cache hash table entries: 256
[ 0.005983] Initializing cgroup subsys cpuacct
[ 0.005988] Initializing cgroup subsys memory
[ 0.005997] Initializing cgroup subsys devices
[ 0.006000] Initializing cgroup subsys freezer
[ 0.006002] Initializing cgroup subsys net_cls
[ 0.006003] Initializing cgroup subsys blkio
[ 0.006009] Initializing cgroup subsys perf_event
[ 0.006035] CPU: Physical Processor ID: 0
[ 0.006036] CPU: Processor Core ID: 0
[ 0.006040] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006041] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006044] mce: CPU supports 9 MCE banks
[ 0.006057] CPU0: Thermal monitoring enabled (TM1)
[ 0.006063] using mwait in idle threads.
[ 0.006498] ACPI: Core revision 20110623
[ 0.028567] DMAR: Host address width 36
[ 0.028569] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028575] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.028577] DMAR: RMRR base: 0x000000bf69a000 end: 0x000000bf6b9fff
[ 0.028648] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 0
[ 0.028650] HPET id 0 under DRHD base 0xfed91000
[ 0.028651] HPET id 0 under DRHD base 0xfed91000
[ 0.028652] HPET id 0 under DRHD base 0xfed91000
[ 0.028653] HPET id 0 under DRHD base 0xfed91000
[ 0.028655] HPET id 0 under DRHD base 0xfed91000
[ 0.028656] HPET id 0 under DRHD base 0xfed91000
[ 0.028657] HPET id 0 under DRHD base 0xfed91000
[ 0.028658] HPET id 0 under DRHD base 0xfed91000
[ 0.028748] Enabled IRQ remapping in x2apic mode
[ 0.028749] Enabling x2apic
[ 0.028750] Enabled x2apic
[ 0.028755] Switched APIC routing to cluster x2apic.
[ 0.029186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068820] CPU0: Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz stepping 07
[ 0.175727] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.175732] PEBS disabled due to CPU errata.
[ 0.175734] ... version: 3
[ 0.175735] ... bit width: 48
[ 0.175736] ... generic registers: 4
[ 0.175737] ... value mask: 0000ffffffffffff
[ 0.175738] ... max period: 000000007fffffff
[ 0.175740] ... fixed-purpose events: 3
[ 0.175741] ... event mask: 000000070000000f
[ 0.175871] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.175959] Booting Node 0, Processors #1
[ 0.175961] smpboot cpu 1: start_ip = 99000
[ 0.283690] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.283788] #2
[ 0.283789] smpboot cpu 2: start_ip = 99000
[ 0.391513] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.391609] #3
[ 0.391611] smpboot cpu 3: start_ip = 99000
[ 0.499432] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.499523] #4
[ 0.499524] smpboot cpu 4: start_ip = 99000
[ 0.607247] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.607338] #5
[ 0.607339] smpboot cpu 5: start_ip = 99000
[ 0.715160] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.715251] #6
[ 0.715252] smpboot cpu 6: start_ip = 99000
[ 0.822974] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.823066] #7 Ok.
[ 0.823067] smpboot cpu 7: start_ip = 99000
[ 0.930789] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.930816] Brought up 8 CPUs
[ 0.930818] Total of 8 processors activated (39907.92 BogoMIPS).
[ 0.939303] devtmpfs: initialized
[ 0.942555] PM: Registering ACPI NVS region at bf6bd000 (1048576 bytes)
[ 0.942732] print_constraints: dummy:
[ 0.942789] NET: Registered protocol family 16
[ 0.942877] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.942879] ACPI: bus type pci registered
[ 0.942957] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.942960] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.963109] PCI: Using configuration type 1 for base access
[ 0.964106] bio: create slab <bio-0> at 0
[ 0.964197] ACPI: Added _OSI(Module Device)
[ 0.964199] ACPI: Added _OSI(Processor Device)
[ 0.964200] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.964202] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.965705] ACPI: EC: Look up EC in DSDT
[ 0.979957] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.011537] ACPI: SSDT 00000000bf625798 0074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 1.011938] ACPI: Dynamic OEM Table Load:
[ 1.011940] ACPI: SSDT (null) 0074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 1.022943] ACPI: SSDT 00000000bf626a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 1.023388] ACPI: Dynamic OEM Table Load:
[ 1.023390] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 1.034750] ACPI: SSDT 00000000bf624d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 1.035135] ACPI: Dynamic OEM Table Load:
[ 1.035137] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 2.949554] ACPI: Interpreter enabled
[ 2.949558] ACPI: (supports S0 S3 S4 S5)
[ 2.949582] ACPI: Using IOAPIC for interrupt routing
[ 2.951776] ACPI: Power Resource [APPR] (off)
[ 2.964782] ACPI: Power Resource [LPP] (on)
[ 2.967944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 2.968126] ACPI: No dock devices found.
[ 2.968128] HEST: Table not found.
[ 2.968130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.969068] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 2.969810] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 2.969812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 2.969814] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 2.969816] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 2.969818] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
[ 2.969820] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 2.969830] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 2.969865] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 2.969894] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.969897] pci 0000:00:01.0: PME# disabled
[ 2.969939] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 2.969964] pci 0000:00:16.0: reg 10: [mem 0xd2524000-0xd252400f 64bit]
[ 2.970040] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.970044] pci 0000:00:16.0: PME# disabled
[ 2.970073] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 2.970091] pci 0000:00:19.0: reg 10: [mem 0xd2500000-0xd251ffff]
[ 2.970100] pci 0000:00:19.0: reg 14: [mem 0xd252a000-0xd252afff]
[ 2.970109] pci 0000:00:19.0: reg 18: [io 0x5020-0x503f]
[ 2.970171] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 2.970175] pci 0000:00:19.0: PME# disabled
[ 2.970199] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 2.970220] pci 0000:00:1a.0: reg 10: [mem 0xd2529000-0xd25293ff]
[ 2.970310] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.970314] pci 0000:00:1a.0: PME# disabled
[ 2.970339] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 2.970354] pci 0000:00:1b.0: reg 10: [mem 0xd2520000-0xd2523fff 64bit]
[ 2.970421] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.970425] pci 0000:00:1b.0: PME# disabled
[ 2.970447] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 2.970525] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.970529] pci 0000:00:1c.0: PME# disabled
[ 2.970553] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 2.970632] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.970636] pci 0000:00:1c.1: PME# disabled
[ 2.970659] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 2.970737] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.970741] pci 0000:00:1c.2: PME# disabled
[ 2.970765] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 2.970844] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.970848] pci 0000:00:1c.3: PME# disabled
[ 2.970874] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[ 2.970952] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 2.970956] pci 0000:00:1c.7: PME# disabled
[ 2.970984] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 2.971004] pci 0000:00:1d.0: reg 10: [mem 0xd2528000-0xd25283ff]
[ 2.971094] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.971098] pci 0000:00:1d.0: PME# disabled
[ 2.971123] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 2.971247] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 2.971265] pci 0000:00:1f.2: reg 10: [io 0x5048-0x504f]
[ 2.971273] pci 0000:00:1f.2: reg 14: [io 0x5054-0x5057]
[ 2.971281] pci 0000:00:1f.2: reg 18: [io 0x5040-0x5047]
[ 2.971289] pci 0000:00:1f.2: reg 1c: [io 0x5050-0x5053]
[ 2.971297] pci 0000:00:1f.2: reg 20: [io 0x5000-0x501f]
[ 2.971305] pci 0000:00:1f.2: reg 24: [mem 0xd2527000-0xd25277ff]
[ 2.971350] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.971353] pci 0000:00:1f.2: PME# disabled
[ 2.971396] pci 0000:01:00.0: [10de:0dda] type 0 class 0x000300
[ 2.971404] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff]
[ 2.971412] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xc7ffffff 64bit pref]
[ 2.971421] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xcbffffff 64bit pref]
[ 2.971427] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
[ 2.971433] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 2.971476] pci 0000:01:00.1: [10de:0be9] type 0 class 0x000403
[ 2.971484] pci 0000:01:00.1: reg 10: [mem 0xd2000000-0xd2003fff]
[ 2.975986] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.975993] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.976000] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd20fffff]
[ 2.976010] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcbffffff 64bit pref]
[ 2.976073] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.976079] pci 0000:00:1c.0: bridge window [mem 0xd2400000-0xd24fffff]
[ 2.976128] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
[ 2.976132] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 2.976136] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff]
[ 2.976215] pci 0000:24:00.0: [197b:2380] type 0 class 0x000c00
[ 2.976240] pci 0000:24:00.0: reg 10: [mem 0xd2300000-0xd23007ff]
[ 2.976263] pci 0000:24:00.0: reg 14: [mem 0xd2305000-0xd23050ff]
[ 2.976520] pci 0000:24:00.1: [197b:2392] type 0 class 0x000880
[ 2.976546] pci 0000:24:00.1: reg 10: [mem 0xd2304000-0xd23040ff]
[ 2.976653] pci 0000:24:00.1: reg 30: [mem 0xffff8000-0xffffffff pref]
[ 2.976792] pci 0000:24:00.2: [197b:2391] type 0 class 0x000805
[ 2.976819] pci 0000:24:00.2: reg 10: [mem 0xd2303000-0xd23030ff]
[ 2.984003] pci 0000:00:1c.2: PCI bridge to [bus 24-24]
[ 2.984025] pci 0000:00:1c.2: bridge window [mem 0xd2300000-0xd23fffff]
[ 2.984235] pci 0000:25:00.0: [8086:0085] type 0 class 0x000280
[ 2.984382] pci 0000:25:00.0: reg 10: [mem 0xd2200000-0xd2201fff 64bit]
[ 2.985098] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
[ 2.985133] pci 0000:25:00.0: PME# disabled
[ 2.992082] pci 0000:00:1c.3: PCI bridge to [bus 25-25]
[ 2.992089] pci 0000:00:1c.3: bridge window [mem 0xd2200000-0xd22fffff]
[ 2.992171] pci 0000:26:00.0: [1033:0194] type 0 class 0x000c03
[ 2.992218] pci 0000:26:00.0: reg 10: [mem 0xd2100000-0xd2101fff 64bit]
[ 2.992409] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[ 2.992417] pci 0000:26:00.0: PME# disabled
[ 2.999959] pci 0000:00:1c.7: PCI bridge to [bus 26-26]
[ 2.999973] pci 0000:00:1c.7: bridge window [mem 0xd2100000-0xd21fffff]
[ 3.000026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 3.000255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 3.000337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 3.000385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 3.000461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 3.000525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 3.000576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 3.001185] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 3.002757] pci0000:00: ACPI _OSC control (0x1d) granted
[ 3.009328] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 3.009378] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 3.009426] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 3.009472] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 3.009519] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 3.009566] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 3.009613] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 3.009660] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 3.009756] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.009760] vgaarb: loaded
[ 3.009761] vgaarb: bridge control possible 0000:01:00.0
[ 3.009793] PCI: Using ACPI for IRQ routing
[ 3.016363] PCI: pci_cache_line_size set to 64 bytes
[ 3.016462] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 3.016465] reserve RAM buffer: 00000000beebd000 - 00000000bfffffff
[ 3.016467] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 3.016469] reserve RAM buffer: 000000043e000000 - 000000043fffffff
[ 3.016566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 3.016571] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 3.018585] Switching to clocksource hpet
[ 3.020288] pnp: PnP ACPI init
[ 3.020299] ACPI: bus type pnp registered
[ 3.020671] pnp 00:00: [bus 00-3e]
[ 3.020674] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 3.020676] pnp 00:00: [io 0x0cf8-0x0cff]
[ 3.020678] pnp 00:00: [io 0x0d00-0xffff window]
[ 3.020680] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 3.020681] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 3.020683] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 3.020684] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 3.020686] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 3.020688] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 3.020689] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 3.020691] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 3.020692] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 3.020694] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 3.020696] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 3.020697] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 3.020699] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 3.020700] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 3.020702] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 3.020704] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
[ 3.020705] pnp 00:00: [mem 0xfee01000-0xffffffff window]
[ 3.020751] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 3.020847] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 3.020848] pnp 00:01: [mem 0xfed10000-0xfed17fff]
[ 3.020850] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 3.020851] pnp 00:01: [mem 0x00000000-0x00000fff]
[ 3.020853] pnp 00:01: [mem 0xd2600000-0xd2600fff]
[ 3.020854] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 3.020856] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 3.020857] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 3.020859] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 3.020860] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 3.020901] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.020903] system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 3.020905] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.020908] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 3.020910] system 00:01: [mem 0xd2600000-0xd2600fff] has been reserved
[ 3.020912] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 3.020914] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.020916] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 3.020918] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.020921] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.020923] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.020994] pnp 00:02: [io 0x0000-0x001f]
[ 3.020996] pnp 00:02: [io 0x0081-0x0091]
[ 3.020997] pnp 00:02: [io 0x0093-0x009f]
[ 3.020999] pnp 00:02: [io 0x00c0-0x00df]
[ 3.021001] pnp 00:02: [dma 4]
[ 3.021029] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 3.021037] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 3.021068] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 3.021120] pnp 00:04: [io 0xfe00-0xfe0f]
[ 3.021122] pnp 00:04: [io 0xfe80-0xfe8f]
[ 3.021123] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[ 3.021152] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 3.021234] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 3.021263] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 3.021273] pnp 00:06: [io 0x00f0]
[ 3.021282] pnp 00:06: [irq 13]
[ 3.021310] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 3.021320] pnp 00:07: [io 0x002e-0x002f]
[ 3.021322] pnp 00:07: [io 0x004e-0x004f]
[ 3.021323] pnp 00:07: [io 0x0061]
[ 3.021325] pnp 00:07: [io 0x0063]
[ 3.021326] pnp 00:07: [io 0x0065]
[ 3.021327] pnp 00:07: [io 0x0067]
[ 3.021329] pnp 00:07: [io 0x0070]
[ 3.021330] pnp 00:07: [io 0x0080]
[ 3.021331] pnp 00:07: [io 0x0092]
[ 3.021333] pnp 00:07: [io 0x00b2-0x00b3]
[ 3.021334] pnp 00:07: [io 0x0200-0x027f]
[ 3.021336] pnp 00:07: [io 0x1000-0x100f]
[ 3.021337] pnp 00:07: [io 0xffff]
[ 3.021338] pnp 00:07: [io 0xffff]
[ 3.021340] pnp 00:07: [io 0x0400-0x047f]
[ 3.021341] pnp 00:07: [io 0x0500-0x057f]
[ 3.021342] pnp 00:07: [io 0xef80-0xef9f]
[ 3.021389] system 00:07: [io 0x0200-0x027f] has been reserved
[ 3.021391] system 00:07: [io 0x1000-0x100f] has been reserved
[ 3.021393] system 00:07: [io 0xffff] has been reserved
[ 3.021395] system 00:07: [io 0xffff] has been reserved
[ 3.021397] system 00:07: [io 0x0400-0x047f] has been reserved
[ 3.021399] system 00:07: [io 0x0500-0x057f] has been reserved
[ 3.021401] system 00:07: [io 0xef80-0xef9f] has been reserved
[ 3.021403] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.021411] pnp 00:08: [io 0x0070-0x0077]
[ 3.021418] pnp 00:08: [irq 8]
[ 3.021446] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.021948] pnp 00:09: [io 0x0378-0x037f]
[ 3.021950] pnp 00:09: [io 0x0778-0x077a]
[ 3.021956] pnp 00:09: [irq 5]
[ 3.021957] pnp 00:09: [dma 0 disabled]
[ 3.022049] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 3.022058] pnp 00:0a: [io 0x0060]
[ 3.022059] pnp 00:0a: [io 0x0064]
[ 3.022065] pnp 00:0a: [irq 1]
[ 3.022095] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.022107] pnp 00:0b: [irq 12]
[ 3.022141] pnp 00:0b: Plug and Play ACPI device, IDs SYN0183 SYN0100 SYN0002 PNP0f13 (active)
[ 3.022387] pnp 00:0c: [irq 23]
[ 3.022433] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 3.022682] pnp: PnP ACPI: found 13 devices
[ 3.022683] ACPI: ACPI bus type pnp unregistered
[ 3.029206] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 3.029209] pci 0000:24:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
[ 3.029213] PCI: max bus depth: 1 pci_try_num: 2
[ 3.029259] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd2700000-0xd27fffff pref]
[ 3.029262] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd2800000-0xd29fffff 64bit pref]
[ 3.029265] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2080000-0xd20fffff pref]
[ 3.029267] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 3.029269] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 3.029272] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd20fffff]
[ 3.029274] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcbffffff 64bit pref]
[ 3.029278] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 3.029283] pci 0000:00:1c.0: bridge window [mem 0xd2400000-0xd24fffff]
[ 3.029291] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
[ 3.029294] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 3.029300] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff]
[ 3.029303] pci 0000:00:1c.1: bridge window [mem 0xd2800000-0xd29fffff 64bit pref]
[ 3.029311] pci 0000:24:00.1: BAR 6: assigned [mem 0xd2700000-0xd2707fff pref]
[ 3.029312] pci 0000:00:1c.2: PCI bridge to [bus 24-24]
[ 3.029317] pci 0000:00:1c.2: bridge window [mem 0xd2300000-0xd23fffff]
[ 3.029322] pci 0000:00:1c.2: bridge window [mem 0xd2700000-0xd27fffff pref]
[ 3.029328] pci 0000:00:1c.3: PCI bridge to [bus 25-25]
[ 3.029333] pci 0000:00:1c.3: bridge window [mem 0xd2200000-0xd22fffff]
[ 3.029342] pci 0000:00:1c.7: PCI bridge to [bus 26-26]
[ 3.029347] pci 0000:00:1c.7: bridge window [mem 0xd2100000-0xd21fffff]
[ 3.029364] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.029367] pci 0000:00:01.0: setting latency timer to 64
[ 3.029378] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.029382] pci 0000:00:1c.0: setting latency timer to 64
[ 3.029388] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.029393] pci 0000:00:1c.1: setting latency timer to 64
[ 3.029401] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.029405] pci 0000:00:1c.2: setting latency timer to 64
[ 3.029415] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.029420] pci 0000:00:1c.3: setting latency timer to 64
[ 3.029426] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.029430] pci 0000:00:1c.7: setting latency timer to 64
[ 3.029433] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.029435] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.029437] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.029438] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[ 3.029440] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 3.029441] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 3.029443] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 3.029445] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd20fffff]
[ 3.029446] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcbffffff 64bit pref]
[ 3.029448] pci_bus 0000:02: resource 1 [mem 0xd2400000-0xd24fffff]
[ 3.029450] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 3.029451] pci_bus 0000:03: resource 1 [mem 0xcc000000-0xcfffffff]
[ 3.029453] pci_bus 0000:03: resource 2 [mem 0xd2800000-0xd29fffff 64bit pref]
[ 3.029455] pci_bus 0000:24: resource 1 [mem 0xd2300000-0xd23fffff]
[ 3.029456] pci_bus 0000:24: resource 2 [mem 0xd2700000-0xd27fffff pref]
[ 3.029458] pci_bus 0000:25: resource 1 [mem 0xd2200000-0xd22fffff]
[ 3.029460] pci_bus 0000:26: resource 1 [mem 0xd2100000-0xd21fffff]
[ 3.029550] NET: Registered protocol family 2
[ 3.029924] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 3.031010] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 3.032150] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.032268] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.032269] TCP reno registered
[ 3.032292] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.032355] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.032507] NET: Registered protocol family 1
[ 3.032534] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.032561] pci 0000:00:1a.0: PCI INT A disabled
[ 3.032587] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.032612] pci 0000:00:1d.0: PCI INT A disabled
[ 3.032629] pci 0000:01:00.0: Boot video device
[ 3.032661] pci 0000:26:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.032697] pci 0000:26:00.0: PCI INT A disabled
[ 3.032701] PCI: CLS 64 bytes, default 64
[ 3.032742] Unpacking initramfs...
[ 3.251769] Freeing initrd memory: 11824k freed
[ 3.253038] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.253042] Placing 64MB software IO TLB between ffff8800baeab000 - ffff8800beeab000
[ 3.253044] software IO TLB at phys 0xbaeab000 - 0xbeeab000
[ 3.253754] audit: initializing netlink socket (disabled)
[ 3.253763] type=2000 audit(1349968211.016:1): initialized
[ 3.283016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.315929] VFS: Disk quotas dquot_6.5.2
[ 3.315964] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.316037] msgmni has been set to 32073
[ 3.316186] alg: No test for stdrng (krng)
[ 3.316220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.316223] io scheduler noop registered
[ 3.316224] io scheduler deadline registered
[ 3.316251] io scheduler cfq registered (default)
[ 3.316337] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.316364] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 3.316425] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.316466] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 3.316534] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.316575] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
[ 3.316654] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.316695] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
[ 3.316761] pcieport 0000:00:1c.3: setting latency timer to 64
[ 3.316802] pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
[ 3.316868] pcieport 0000:00:1c.7: setting latency timer to 64
[ 3.316909] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
[ 3.316994] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 3.316996] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.316997] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 3.317000] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 3.317015] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.317019] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.317034] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.317039] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.317054] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 3.317056] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
[ 3.317057] pci 0000:24:00.1: Signaling PME through PCIe PME interrupt
[ 3.317059] pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
[ 3.317063] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 3.317078] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 3.317080] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
[ 3.317084] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 3.317099] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 3.317101] pci 0000:26:00.0: Signaling PME through PCIe PME interrupt
[ 3.317105] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 3.317119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.317177] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 103c ss_did 1631
[ 3.317197] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 3.317203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.317204] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.317623] intel_idle: MWAIT substates: 0x21120
[ 3.317625] intel_idle: v0.4 model 0x2A
[ 3.317626] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.317666] ERST: Table is not found!
[ 3.317667] GHES: HEST is not enabled!
[ 3.317718] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.510189] Linux agpgart interface v0.103
[ 3.510381] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.512292] i8042: Detected active multiplexing controller, rev 1.1
[ 3.513001] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.513007] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.513009] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.513011] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.513013] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.513103] mousedev: PS/2 mouse device common for all mice
[ 3.513143] rtc_cmos 00:08: RTC can wake from S4
[ 3.513255] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.513284] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.513455] cpuidle: using governor ladder
[ 3.513662] cpuidle: using governor menu
[ 3.513831] TCP cubic registered
[ 3.514066] NET: Registered protocol family 10
[ 3.514604] Mobile IPv6
[ 3.514606] NET: Registered protocol family 17
[ 3.514609] Registering the dns_resolver key type
[ 3.514856] PM: Hibernation image not present or could not be loaded.
[ 3.514867] registered taskstats version 1
[ 3.531758] rtc_cmos 00:08: setting system clock to 2012-10-11 15:10:11 UTC (1349968211)
[ 3.531815] Initializing network drop monitor service
[ 3.532807] Freeing unused kernel memory: 572k freed
[ 3.532864] Write protecting the kernel read-only data: 6144k
[ 3.535070] Freeing unused kernel memory: 668k freed
[ 3.537235] Freeing unused kernel memory: 684k freed
[ 3.539726] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.586478] udevd[82]: starting version 175
[ 3.602981] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 3.602984] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 3.603025] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.603037] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.603145] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 3.608755] usbcore: registered new interface driver usbfs
[ 3.608787] usbcore: registered new interface driver hub
[ 3.608826] usbcore: registered new device driver usb
[ 3.609508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.610242] sdhci: Secure Digital Host Controller Interface driver
[ 3.610245] sdhci: Copyright(c) Pierre Ossman
[ 3.610264] xhci_hcd 0000:26:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.610293] xhci_hcd 0000:26:00.0: setting latency timer to 64
[ 3.610298] xhci_hcd 0000:26:00.0: xHCI Host Controller
[ 3.610319] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 1
[ 3.610534] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
[ 3.610552] sdhci-pci 0000:24:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.610593] sdhci-pci 0000:24:00.1: setting latency timer to 64
[ 3.610618] mmc0: no vmmc regulator found
[ 3.610657] Registered led device: mmc0::
[ 3.611065] xhci_hcd 0000:26:00.0: irq 19, io mem 0xd2100000
[ 3.611140] xhci_hcd 0000:26:00.0: irq 48 for MSI/MSI-X
[ 3.611147] xhci_hcd 0000:26:00.0: irq 49 for MSI/MSI-X
[ 3.611154] xhci_hcd 0000:26:00.0: irq 50 for MSI/MSI-X
[ 3.611161] xhci_hcd 0000:26:00.0: irq 51 for MSI/MSI-X
[ 3.611167] xhci_hcd 0000:26:00.0: irq 52 for MSI/MSI-X
[ 3.611174] xhci_hcd 0000:26:00.0: irq 53 for MSI/MSI-X
[ 3.611182] xhci_hcd 0000:26:00.0: irq 54 for MSI/MSI-X
[ 3.611189] xhci_hcd 0000:26:00.0: irq 55 for MSI/MSI-X
[ 3.611370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.611373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.611376] usb usb1: Product: xHCI Host Controller
[ 3.611378] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 3.611380] usb usb1: SerialNumber: 0000:26:00.0
[ 3.611469] xHCI xhci_add_endpoint called for root hub
[ 3.611471] xHCI xhci_check_bandwidth called for root hub
[ 3.611505] hub 1-0:1.0: USB hub found
[ 3.611514] hub 1-0:1.0: 2 ports detected
[ 3.611587] xhci_hcd 0000:26:00.0: xHCI Host Controller
[ 3.611594] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 2
[ 3.611698] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
[ 3.611716] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 3.611735] sdhci-pci 0000:24:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.611741] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
[ 3.611751] sdhci-pci 0000:24:00.2: PCI INT A disabled
[ 3.612579] firewire_ohci 0000:24:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.612591] firewire_ohci 0000:24:00.0: setting latency timer to 64
[ 3.612953] SCSI subsystem initialized
[ 3.613907] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.613910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.613912] usb usb2: Product: xHCI Host Controller
[ 3.613914] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 3.613917] usb usb2: SerialNumber: 0000:26:00.0
[ 3.614002] xHCI xhci_add_endpoint called for root hub
[ 3.614004] xHCI xhci_check_bandwidth called for root hub
[ 3.614035] hub 2-0:1.0: USB hub found
[ 3.614045] hub 2-0:1.0: 2 ports detected
[ 3.614975] libata version 3.00 loaded.
[ 3.618668] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.624511] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.624514] ACPI: Thermal Zone [CPUZ] (39 C)
[ 3.643411] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.643414] ACPI: Thermal Zone [GFXZ] (39 C)
[ 3.653213] thermal LNXTHERM:02: registered as thermal_zone2
[ 3.653216] ACPI: Thermal Zone [EXTZ] (27 C)
[ 3.663066] thermal LNXTHERM:03: registered as thermal_zone3
[ 3.663069] ACPI: Thermal Zone [LOCZ] (27 C)
[ 3.673096] thermal LNXTHERM:04: registered as thermal_zone4
[ 3.673098] ACPI: Thermal Zone [BATZ] (21 C)
[ 3.673413] thermal LNXTHERM:05: registered as thermal_zone5
[ 3.673415] ACPI: Thermal Zone [PCHZ] (0 C)
[ 3.673496] thermal LNXTHERM:06: registered as thermal_zone6
[ 3.673498] ACPI: Thermal Zone [DM1Z] (0 C)
[ 3.673608] thermal LNXTHERM:07: registered as thermal_zone7
[ 3.673610] ACPI: Thermal Zone [DM2Z] (0 C)
[ 3.673663] firewire_ohci: Added fw-ohci device 0000:24:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x10
[ 3.673690] thermal LNXTHERM:08: registered as thermal_zone8
[ 3.673697] ACPI: Thermal Zone [DM3Z] (0 C)
[ 3.673781] thermal LNXTHERM:09: registered as thermal_zone9
[ 3.673782] ACPI: Thermal Zone [DM4Z] (0 C)
[ 3.800880] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) ac:16:2d:59:17:0b
[ 3.800884] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.800921] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 3.800984] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.801025] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.801030] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.801041] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.801071] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.804941] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.804960] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd2529000
[ 3.817520] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.817561] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.817563] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.817565] usb usb3: Product: EHCI Host Controller
[ 3.817567] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 3.817568] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.817701] hub 3-0:1.0: USB hub found
[ 3.817705] hub 3-0:1.0: 3 ports detected
[ 3.817780] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.817859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.817862] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.817869] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.817894] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.821765] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.821772] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd2528000
[ 3.929366] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3.941348] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.941379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.941382] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.941383] usb usb4: Product: EHCI Host Controller
[ 3.941385] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 3.941386] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.941531] hub 4-0:1.0: USB hub found
[ 3.941535] hub 4-0:1.0: 3 ports detected
[ 3.941657] ahci 0000:00:1f.2: version 3.0
[ 3.941670] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.941759] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
[ 3.941786] ahci: SSS flag set, parallel bus scan disabled
[ 3.957334] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 3.957338] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.957344] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.958542] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 3.960552] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 3.962552] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 3.989856] scsi0 : ahci
[ 3.990094] scsi1 : ahci
[ 3.990230] scsi2 : ahci
[ 3.990377] scsi3 : ahci
[ 3.990515] scsi4 : ahci
[ 3.990653] scsi5 : ahci
[ 3.990931] ata1: SATA max UDMA/133 abar m2048@0xd2527000 port 0xd2527100 irq 56
[ 3.990935] ata2: SATA max UDMA/133 abar m2048@0xd2527000 port 0xd2527180 irq 56
[ 3.990937] ata3: DUMMY
[ 3.990939] ata4: SATA max UDMA/133 abar m2048@0xd2527000 port 0xd2527280 irq 56
[ 3.990942] ata5: SATA max UDMA/133 abar m2048@0xd2527000 port 0xd2527300 irq 56
[ 3.990946] ata6: SATA max UDMA/133 abar m2048@0xd2527000 port 0xd2527380 irq 56
[ 4.010514] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 4.019492] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 4.027475] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 4.029498] usb 1-1: New USB device found, idVendor=047f, idProduct=aa01
[ 4.029502] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.029504] usb 1-1: Product: Plantronics C620-M
[ 4.029505] usb 1-1: Manufacturer: Plantronics
[ 4.141096] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 4.173195] firewire_core: created device fw0: GUID ffe473fffffffffe, S400
[ 4.248937] Refined TSC clocksource calibration: 2494.334 MHz.
[ 4.248942] Switching to clocksource tsc
[ 4.273401] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.273405] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.273861] hub 3-1:1.0: USB hub found
[ 4.274045] hub 3-1:1.0: 6 ports detected
[ 4.308878] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.309449] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.309556] ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000C, max UDMA/100
[ 4.309574] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.310182] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.310294] ata1.00: configured for UDMA/100
[ 4.310554] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5
[ 4.384782] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 4.517085] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.517089] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.517399] hub 4-1:1.0: USB hub found
[ 4.517479] hub 4-1:1.0: 8 ports detected
[ 4.588726] usb 3-1.1: new full-speed USB device number 3 using ehci_hcd
[ 4.628409] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.633160] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.633167] ata2.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100
[ 4.641084] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.641092] ata2.00: configured for UDMA/100
[ 4.651095] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5
[ 4.682377] usb 3-1.1: New USB device found, idVendor=138a, idProduct=003c
[ 4.682381] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.682383] usb 3-1.1: SerialNumber: 00b0b4492d8a
[ 4.788463] usb 4-1.6: new full-speed USB device number 3 using ehci_hcd
[ 4.884571] usb 4-1.6: New USB device found, idVendor=03f0, idProduct=231d
[ 4.884590] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.884592] usb 4-1.6: Product: HP Integrated Module
[ 4.884593] usb 4-1.6: Manufacturer: Broadcom Corp
[ 4.968023] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.287595] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.607173] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.611796] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.611834] sd 0:0:0:0: [sda] Write Protect is off
[ 5.611836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.611849] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.620749] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.620753] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.620948] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.655381] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 5.660391] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 5.665391] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 5.670379] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 5.687361] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 5.689464] input: Plantronics Plantronics C620-M as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1/1-1:1.3/input/input1
[ 5.689709] generic-usb 0003:047F:AA01.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Plantronics C620-M] on usb-0000:26:00.0-1/input3
[ 5.689730] usbcore: registered new interface driver usbhid
[ 5.689732] usbhid: USB HID core driver
[ 5.690801] sda: sda1 sda2 < sda5 >
[ 5.691232] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.445253] device-mapper: uevent: version 1.0.3
[ 6.445309] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 20.088754] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni))
[ 21.076785] PM: Starting manual resume from disk
[ 21.076789] PM: Hibernation image partition 254:2 present
[ 21.076790] PM: Looking for hibernation image.
[ 21.104558] PM: Image not found (code -22)
[ 21.104561] PM: Hibernation image not present or could not be loaded.
[ 21.145280] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.880530] udevd[513]: starting version 175
[ 23.670980] ACPI: Requesting acpi_cpufreq
[ 23.671440] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 23.671446] ACPI: Sleep Button [SLPB]
[ 23.671494] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 23.671572] ACPI: Lid Switch [LID]
[ 23.707887] acpi device:02: registered as cooling_device7
[ 23.708062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 23.708069] ACPI: Power Button [PWRF]
[ 23.709604] ACPI: Can't attach device
[ 23.709696] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 23.709701] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 23.715802] iTCO_vendor_support: vendor-support=0
[ 23.737332] wmi: Mapper loaded
[ 23.788499] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 23.817558] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 23.817628] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 23.817679] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 23.847416] parport_pc 00:09: reported by Plug and Play ACPI
[ 23.847501] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 23.887107] ACPI: Battery Slot [BAT0] (battery present)
[ 23.887161] ACPI: Battery Slot [BAT1] (battery absent)
[ 23.931392] ACPI: AC Adapter [AC] (on-line)
[ 23.943563] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 24.131442] cfg80211: Calling CRDA to update world regulatory domain
[ 24.209207] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 24.209209] Copyright(c) 2003-2011 Intel Corporation
[ 24.209252] iwlwifi 0000:25:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 24.209262] iwlwifi 0000:25:00.0: setting latency timer to 64
[ 24.209279] iwlwifi 0000:25:00.0: pci_resource_len = 0x00002000
[ 24.209281] iwlwifi 0000:25:00.0: pci_resource_base = ffffc90012628000
[ 24.209282] iwlwifi 0000:25:00.0: HW Revision ID = 0x34
[ 24.209370] iwlwifi 0000:25:00.0: irq 57 for MSI/MSI-X
[ 24.209403] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 24.209454] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 24.219769] iwlwifi 0000:25:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 24.219771] iwlwifi 0000:25:00.0: Device SKU: 0X1f0
[ 24.219772] iwlwifi 0000:25:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 24.219786] iwlwifi 0000:25:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 24.220151] [drm] Initialized drm 1.1.0 20060810
[ 24.326126] MXM: GUID detected in BIOS
[ 24.422919] hp_accel: laptop model unknown, using default axes configuration
[ 24.423161] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 24.423285] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.423290] nouveau 0000:01:00.0: setting latency timer to 64
[ 24.424224] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c3d00a1)
[ 24.429838] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 24.470107] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 24.492455] iwlwifi 0000:25:00.0: loaded firmware version 17.168.5.3 build 42301
[ 24.492576] Registered led device: phy0-led
[ 24.511525] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 24.511530] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 24.511532] [drm] nouveau 0000:01:00.0: Bios version 70.06.3a.00
[ 24.511535] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 24.511537] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 24.511539] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000313 00010034
[ 24.511541] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 080153d6 0f220020
[ 24.511543] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 08015392 00020020
[ 24.511545] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 080143c6 0f220010
[ 24.511546] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 08014382 00020010
[ 24.511548] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 040383b6 0f220014
[ 24.511550] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 020273a6 0f220010
[ 24.511551] [drm] nouveau 0000:01:00.0: Raw DCB entry 7: 02027362 00020010
[ 24.511553] [drm] nouveau 0000:01:00.0: Raw DCB entry 8: 02049300 00000000
[ 24.511556] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 24.511558] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 24.511561] [drm] nouveau 0000:01:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07
[ 24.511563] [drm] nouveau 0000:01:00.0: 2: 0x00001231: type 0x31 idx 2 tag 0x07
[ 24.511565] [drm] nouveau 0000:01:00.0: 3: 0x01000331: type 0x31 idx 3 tag 0x5e
[ 24.511567] [drm] nouveau 0000:01:00.0: 4: 0x01000446: type 0x46 idx 4 tag 0x5e
[ 24.511569] [drm] nouveau 0000:01:00.0: 5: 0x02000546: type 0x46 idx 5 tag 0x5f
[ 24.511571] [drm] nouveau 0000:01:00.0: 6: 0x00010631: type 0x31 idx 6 tag 0x51
[ 24.511573] [drm] nouveau 0000:01:00.0: 7: 0x00010746: type 0x46 idx 7 tag 0x51
[ 24.511574] [drm] nouveau 0000:01:00.0: 8: 0x00020847: type 0x47 idx 8 tag 0x52
[ 24.511577] [drm] nouveau 0000:01:00.0: 9: 0x00000900: type 0x00 idx 9 tag 0xff
[ 24.511580] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x8134
[ 24.527151] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 24.541348] [drm] nouveau 0000:01:00.0: unknown i2c port 51
[ 24.541423] [drm] nouveau 0000:01:00.0: 0x80D8: i2c bus not found
[ 24.541595] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x8828
[ 24.544235] Bluetooth: Core ver 2.16
[ 24.544247] NET: Registered protocol family 31
[ 24.544249] Bluetooth: HCI device and connection manager initialized
[ 24.544251] Bluetooth: HCI socket layer initialized
[ 24.544252] Bluetooth: L2CAP socket layer initialized
[ 24.544256] Bluetooth: SCO socket layer initialized
[ 24.548607] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x9B46
[ 24.548609] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9B50
[ 24.548664] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9D25
[ 24.548666] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x9D8A
[ 24.558058] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 24.558186] usbcore: registered new interface driver btusb
[ 24.568484] [drm] nouveau 0000:01:00.0: 0x9D8A: Condition still not met after 20ms, skipping following opcodes
[ 24.568538] [drm] nouveau 0000:01:00.0: unknown i2c port 51
[ 24.568603] [drm] nouveau 0000:01:00.0: 2 available performance level(s)
[ 24.568606] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 135MHz timing 4
[ 24.568609] [drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 324MHz timing 5
[ 24.568685] [drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 890mV
[ 24.572383] [TTM] Zone kernel: Available graphics memory: 8211670 kiB.
[ 24.572385] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 24.572387] [TTM] Initializing pool allocator.
[ 24.572396] [drm] nouveau 0000:01:00.0: Detected 2048MiB VRAM
[ 24.578802] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 24.584360] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 24.633952] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 24.633954] [drm] No driver support for vblank timestamp query.
[ 24.633963] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 24.634335] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 24.634516] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 24.634719] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 24.634838] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 24.679551] No connectors reported connected with modes
[ 24.679555] [drm] Cannot find any crtc or sizes - going 1024x768
[ 24.680192] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x1c0000, bo ffff880429a33800
[ 24.680248] fbcon: nouveaufb (fb0) is primary device
[ 24.692315] Console: switching to colour frame buffer device 128x48
[ 24.694258] fb0: nouveaufb frame buffer device
[ 24.694259] drm: registered panic notifier
[ 24.694264] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 25.273136] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd40033/0x640000/0xa0400
[ 25.318811] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 25.371040] cfg80211: World regulatory domain updated:
[ 25.371043] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.371046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.371048] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.371050] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.371052] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.371054] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.621644] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 25.629669] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 25.641546] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 25.641590] 2:1:1: cannot get freq at ep 0x4
[ 25.655643] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 25.655698] 2:2:1: cannot get freq at ep 0x84
[ 25.664539] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 25.671510] xhci_hcd 0000:26:00.0: WARN: short transfer on control ep
[ 25.673741] usbcore: registered new interface driver snd-usb-audio
[ 25.766661] lis3lv02d: 8 bits 3DC sensor found
[ 25.771493] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 25.771512] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 25.771556] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 25.771773] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
[ 25.771824] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 25.833548] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 25.853366] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 25.853693] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 25.854015] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 25.854255] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 25.856174] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 25.856185] hda_intel: Disabling MSI
[ 25.856295] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 26.699893] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 26.731839] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 26.763840] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 26.795800] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 26.812016] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 26.812400] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[ 26.812759] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[ 26.813111] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
[ 27.003697] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input19
[ 27.004297] Registered led device: hp::hddprotect
[ 27.004339] hp_accel: driver loaded
[ 27.992402] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 28.225679] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 28.756358] loop: module loaded
[ 29.612995] Adding 15622140k swap on /dev/mapper/thukpa-swap. Priority:-1 extents:1 across:15622140k
[ 30.279562] kjournald starting. Commit interval 5 seconds
[ 30.279792] EXT3-fs (sda1): using internal journal
[ 30.279803] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 30.333261] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 30.394375] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 30.458622] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 31.666437] RPC: Registered named UNIX socket transport module.
[ 31.666445] RPC: Registered udp transport module.
[ 31.666449] RPC: Registered tcp transport module.
[ 31.666453] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.708584] FS-Cache: Loaded
[ 31.755787] FS-Cache: Netfs 'nfs' registered for caching
[ 31.769536] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 34.685496] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 34.688017] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 34.688862] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 34.689750] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 34.690580] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 36.547910] vboxdrv: Found 8 processor cores.
[ 36.548539] vboxdrv: fAsync=0 offMin=0x11d offMax=0x1570a
[ 36.548597] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 36.548598] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[ 36.823962] vboxpci: IOMMU not found (not registered)
[ 37.473584] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input20
[ 39.700621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.700627] Bluetooth: BNEP filters: protocol multicast
[ 39.730741] Bluetooth: RFCOMM TTY layer initialized
[ 39.730745] Bluetooth: RFCOMM socket layer initialized
[ 39.730746] Bluetooth: RFCOMM ver 1.11
[ 40.748512] lp0: using parport0 (interrupt-driven).
[ 40.778688] ppdev: user-space parallel port driver
[ 41.892306] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 41.948119] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 41.948920] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.020661] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 42.020784] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
[ 42.306825] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 42.306950] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
[ 42.424296] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.843600] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 43.843760] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 43.843956] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 43.843983] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 43.844017] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 43.844042] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 43.844124] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 43.844149] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 43.844159] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 43.888784] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 43.933454] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 43.933642] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 43.933861] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 43.933888] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 43.933923] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 43.933948] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 43.934027] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 43.934052] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 43.934060] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 43.978668] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 44.688527] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 44.688774] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 44.688801] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 44.688846] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 44.688848] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 45.345410] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 45.346170] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 46.034978] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 46.035139] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 46.035323] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 46.035349] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 46.035376] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 46.035402] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 46.035468] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 46.035494] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 46.035496] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 46.080104] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 49.816710] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 49.816748] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 49.816781] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 49.816790] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 49.816951] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 50.145165] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 50.145949] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 50.146756] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 50.146794] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 50.146836] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 50.146882] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 50.146968] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 50.147001] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 50.147011] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 50.191661] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 52.825611] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.825669] 2:1:1: cannot get freq at ep 0x4
[ 52.839714] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.839752] 2:2:1: cannot get freq at ep 0x84
[ 52.900524] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.900596] 2:1:1: cannot get freq at ep 0x4
[ 52.912657] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.912700] 2:2:1: cannot get freq at ep 0x84
[ 52.945480] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.945543] 2:2:1: cannot get freq at ep 0x84
[ 52.972431] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 52.972494] 2:1:1: cannot get freq at ep 0x4
[ 53.000525] xhci_hcd 0000:26:00.0: WARN: Stalled endpoint
[ 53.000564] 2:2:1: cannot get freq at ep 0x84
[ 54.691628] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 54.692343] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 54.692376] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 54.692428] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 54.692433] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 64.694740] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 64.695455] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 64.695487] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 64.695540] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 64.695546] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 74.697737] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 74.698453] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 74.698486] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 74.698538] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 74.698544] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 84.700850] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 84.701563] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 84.701596] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 84.701648] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 84.701654] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 94.703906] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 94.704621] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 94.704654] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 94.704708] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 94.704715] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 104.706958] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 104.707674] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 104.707707] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 104.707760] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 104.707766] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 114.710046] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 114.710762] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 114.710795] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 114.710847] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 114.710853] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 124.713067] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 124.713782] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 124.713815] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 124.713867] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 124.713873] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 134.716131] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 134.716847] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 134.716879] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 134.716932] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 134.716938] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 144.719183] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 144.719897] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 144.719930] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 144.719982] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 144.719988] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 154.722241] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 154.722957] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 154.722990] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 154.723042] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 154.723048] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 164.725299] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 164.726016] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 164.726048] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 164.726101] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 164.726107] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 174.728391] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 174.729106] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 174.729138] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 174.729191] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 174.729197] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 184.731402] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 184.732116] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 184.732148] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 184.732203] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 184.732209] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 194.734447] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 194.735163] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 194.735195] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 194.735248] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 194.735254] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 204.737524] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 204.738240] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 204.738273] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 204.738325] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 204.738331] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 214.740629] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 214.741346] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 214.741379] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 214.741431] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 214.741437] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 224.743663] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 224.744380] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 224.744413] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 224.744465] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 224.744471] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 234.746718] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 234.747433] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 234.747466] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 234.747518] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 234.747524] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 244.749791] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 244.750510] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 244.750543] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 244.750595] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 244.750601] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 254.752804] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 254.753521] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 254.753553] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 254.753606] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 254.753612] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 264.755880] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 264.756599] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 264.756632] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 264.756684] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 264.756690] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 274.758892] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 274.759608] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 274.759641] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 274.759693] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 274.759699] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 284.762030] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 284.762748] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 284.762780] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 284.762833] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 284.762839] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 294.765034] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 294.765750] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 294.765783] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 294.765836] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 294.765842] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 304.768177] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 304.768894] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 304.768926] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 304.768978] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 304.768984] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 314.771188] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 314.771904] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 314.771937] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 314.771989] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 314.771995] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 324.774254] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 324.774972] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 324.775004] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 324.775056] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 324.775063] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 334.777271] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 334.777988] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 334.778021] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 334.778073] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 334.778079] [drm] nouveau 0000:01:00.0: unknown i2c port 48
[ 344.780385] [drm] nouveau 0000:01:00.0: unknown i2c port 49
[ 344.781103] [drm] nouveau 0000:01:00.0: unknown i2c port 57
[ 344.781136] [drm] nouveau 0000:01:00.0: unknown i2c port 56
[ 344.781188] [drm] nouveau 0000:01:00.0: unknown i2c port 54
[ 344.781194] [drm] nouveau 0000:01:00.0: unknown i2c port 48
Reply to: