Hi, Per Foreby a écrit : > The computer has been runing just fine under heavy load (Folding at > Home) for some weeks, but a few days ago I started using it as a > workstation, and since then it totally freezes a few times a day. > > This always happens on interactive input. I have the same frequent and irritating issue with two differents Ivy Bridge platforms: 1. Processor: Intel Core i5 3450 (IGP HD 2500) Motherboard: MSI Z77A-G43 (with uptodate BIOS) 2. Processor: Intel Core i5 3570K (IGP HD 4000) Motherboard: ASUS P8Z77-V LX (with uptodate BIOS) I tried these platforms: - with both the IGP and a discrete graphic card (MSI N520GT) using free drivers (Intel and Nouveau) - with several Linux kernels: * linux-image-3.2.0-3-amd64 (testing) * linux-image-3.4-trunk-amd64 (experimental) * linux-image-3.5-trunk-amd64 (experimental) - with both testing and unstable uptodate Debian distributions. I can't work two hours without keyboard and mouse freeze. Sometimes, these systems freeze three or four times an hour! :( Except in rare cases, the system is alive. I can open a remote SSH session and if I push the power button (on the computer case), the logout dialog appears. I can not relate these freezes to a special software, task or action but they always happen when I move the mouse and I never encountered such issue throughout a remote SSH connection. In attachment, you will find the dmesg output dumped (through a remote SSH connection) after the latest freeze and the kernel log file. The last log before a freeze is always like this: ------------------------------------------------------------------------ [ 8276.625165] usb 2-1.5: USB disconnect, device number 8 [ 8276.830839] usb 2-1.5: new low-speed USB device number 9 using ehci_hcd [ 8276.928992] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 8276.928997] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8276.928999] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 8276.929001] usb 2-1.5: Manufacturer: Microsoft [ 8276.934076] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input17 [ 8276.934434] hid-generic 0003:045E:00A4.0007: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 ------------------------------------------------------------------------ Of course, I did not disconnect the mouse or shake its USB cable. :( Sébastien -- Sébastien Dinot, sebastien.dinot@free.fr http://sebastien.dinot.free.fr/ Ne goûtez pas au logiciel libre, vous ne pourriez plus vous en passer !
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5-trunk-amd64 (Debian 3.5.2-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Mon Aug 20 04:17:46 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5-trunk-amd64 root=UUID=103f96e1-a3b8-42ab-9424-d4ba3e58f256 ro quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddf3dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddf3e000-0x00000000de14cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de14d000-0x00000000de15cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000de15d000-0x00000000de27cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de27d000-0x00000000de830fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de831000-0x00000000de831fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de832000-0x00000000de874fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de875000-0x00000000dec94fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dec95000-0x00000000deff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 1201 08/17/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 21E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdeffffff] [ 0.000000] [mem 0x00000000-0xdeffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xdeffffff @ [mem 0x1f903000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21effffff] [ 0.000000] [mem 0x100000000-0x21effffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xdeff6000-0xdeffffff] [ 0.000000] RAMDISK: [mem 0x368e0000-0x37467fff] [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000de150078 0006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000de15abd8 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000de150180 0AA56 (v02 ALASKA A M I 00000021 INTL 20051117) [ 0.000000] ACPI: FACS 00000000de27b080 00040 [ 0.000000] ACPI: APIC 00000000de15ace8 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000de15ad60 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000de15ada8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000de15ade8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000de15ae20 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000de15b190 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000de15bb40 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: BGRT 00000000de15c630 00038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] [ 0.000000] NODE_DATA [mem 0x21effc000-0x21effffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xddf3dfff] [ 0.000000] node 0: [mem 0xde831000-0xde831fff] [ 0.000000] node 0: [mem 0xde875000-0xdec94fff] [ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff] [ 0.000000] node 0: [mem 0x100000000-0x21effffff] [ 0.000000] On node 0 totalpages: 2085624 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 891811 pages, LIFO batch:31 [ 0.000000] Normal zone: 16072 pages used for memmap [ 0.000000] Normal zone: 1159480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ddf3e000 - 00000000de14d000 [ 0.000000] PM: Registered nosave memory: 00000000de14d000 - 00000000de15d000 [ 0.000000] PM: Registered nosave memory: 00000000de15d000 - 00000000de27d000 [ 0.000000] PM: Registered nosave memory: 00000000de27d000 - 00000000de831000 [ 0.000000] PM: Registered nosave memory: 00000000de832000 - 00000000de875000 [ 0.000000] PM: Registered nosave memory: 00000000dec95000 - 00000000deff4000 [ 0.000000] PM: Registered nosave memory: 00000000df000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s82560 r8192 d23936 u524288 [ 0.000000] pcpu-alloc: s82560 r8192 d23936 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055210 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5-trunk-amd64 root=UUID=103f96e1-a3b8-42ab-9424-d4ba3e58f256 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8138900k/8896512k available (3492k kernel code, 554016k absent, 203596k reserved, 3207k data, 580k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3410.201 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.40 BogoMIPS (lpj=13640804) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000025] Security Framework initialized [ 0.000028] AppArmor: AppArmor disabled by boot time parameter [ 0.000346] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001761] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002390] Mount-cache hash table entries: 256 [ 0.002509] Initializing cgroup subsys cpuacct [ 0.002510] Initializing cgroup subsys memory [ 0.002516] Initializing cgroup subsys devices [ 0.002517] Initializing cgroup subsys freezer [ 0.002518] Initializing cgroup subsys net_cls [ 0.002519] Initializing cgroup subsys blkio [ 0.002520] Initializing cgroup subsys perf_event [ 0.002540] CPU: Physical Processor ID: 0 [ 0.002540] CPU: Processor Core ID: 0 [ 0.002543] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002543] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002803] mce: CPU supports 9 MCE banks [ 0.002812] CPU0: Thermal monitoring enabled (TM1) [ 0.002816] using mwait in idle threads. [ 0.003104] ACPI: Core revision 20120320 [ 0.009151] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048798] CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.156431] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.156435] ... version: 3 [ 0.156436] ... bit width: 48 [ 0.156436] ... generic registers: 8 [ 0.156437] ... value mask: 0000ffffffffffff [ 0.156438] ... max period: 000000007fffffff [ 0.156438] ... fixed-purpose events: 3 [ 0.156439] ... event mask: 00000007000000ff [ 0.156520] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.156583] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.196900] Brought up 4 CPUs [ 0.196902] Total of 4 processors activated (27281.60 BogoMIPS). [ 0.199187] devtmpfs: initialized [ 0.201416] PM: Registering ACPI NVS region [mem 0xde15d000-0xde27cfff] (1179648 bytes) [ 0.201437] PM: Registering ACPI NVS region [mem 0xde832000-0xde874fff] (274432 bytes) [ 0.201495] dummy: [ 0.201533] NET: Registered protocol family 16 [ 0.201613] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.201614] ACPI: bus type pci registered [ 0.201649] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.201651] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.204152] PCI: Using configuration type 1 for base access [ 0.204587] bio: create slab <bio-0> at 0 [ 0.204640] ACPI: Added _OSI(Module Device) [ 0.204641] ACPI: Added _OSI(Processor Device) [ 0.204642] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.204643] ACPI: Added _OSI(Processor Aggregator Device) [ 0.205526] ACPI: EC: Look up EC in DSDT [ 0.206559] ACPI: Executed 1 blocks of module-level executable AML code [ 0.208836] ACPI: SSDT 00000000de0fa018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.209063] ACPI: Dynamic OEM Table Load: [ 0.209064] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.209261] ACPI: SSDT 00000000de0fba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.209510] ACPI: Dynamic OEM Table Load: [ 0.209512] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.209613] ACPI: SSDT 00000000de0fcc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.209836] ACPI: Dynamic OEM Table Load: [ 0.209837] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.210283] ACPI: Interpreter enabled [ 0.210286] ACPI: (supports S0 S3 S4 S5) [ 0.210302] ACPI: Using IOAPIC for interrupt routing [ 0.213983] ACPI: Power Resource [FN00] (off) [ 0.214032] ACPI: Power Resource [FN01] (off) [ 0.214082] ACPI: Power Resource [FN02] (off) [ 0.214129] ACPI: Power Resource [FN03] (off) [ 0.214176] ACPI: Power Resource [FN04] (off) [ 0.214469] ACPI: No dock devices found. [ 0.214472] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.214696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.215001] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.215002] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.215003] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.215005] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.215006] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.215007] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.215008] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.215009] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.215010] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.215011] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] [ 0.215030] PCI host bridge to bus 0000:00 [ 0.215031] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.215032] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.215034] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.215035] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.215036] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.215037] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.215038] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.215039] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.215040] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.215041] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.215048] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.215073] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.215095] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.215130] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.215150] pci 0000:00:14.0: reg 10: [mem 0xf7100000-0xf710ffff 64bit] [ 0.215215] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.215235] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.215255] pci 0000:00:16.0: reg 10: [mem 0xf711a000-0xf711a00f 64bit] [ 0.215324] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.215353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.215371] pci 0000:00:1a.0: reg 10: [mem 0xf7118000-0xf71183ff] [ 0.215454] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.215477] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.215490] pci 0000:00:1b.0: reg 10: [mem 0xf7110000-0xf7113fff 64bit] [ 0.215551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.215575] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.215704] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.215737] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.215809] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.215831] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401 [ 0.215903] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.215930] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.215948] pci 0000:00:1d.0: reg 10: [mem 0xf7117000-0xf71173ff] [ 0.216031] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.216054] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.216168] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.216184] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] [ 0.216190] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] [ 0.216197] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] [ 0.216203] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] [ 0.216209] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 0.216216] pci 0000:00:1f.2: reg 24: [mem 0xf7116000-0xf71167ff] [ 0.216255] pci 0000:00:1f.2: PME# supported from D3hot [ 0.216271] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.216284] pci 0000:00:1f.3: reg 10: [mem 0xf7115000-0xf71150ff 64bit] [ 0.216302] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.216346] pci 0000:01:00.0: [10de:1040] type 00 class 0x030000 [ 0.216352] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.216359] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.216366] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.216374] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f] [ 0.216379] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref] [ 0.216417] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 [ 0.216424] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff] [ 0.224378] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.224382] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.224385] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.224390] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.224470] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.224544] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.224562] pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.224594] pci 0000:03:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref] [ 0.224614] pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.224701] pci 0000:03:00.0: supports D1 D2 [ 0.224702] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232373] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.232377] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.232387] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.232456] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401 [ 0.232571] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode) [ 0.232580] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.232582] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.232583] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.232584] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.232585] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.232586] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.232587] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.232588] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.232589] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.232591] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.232700] pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.232721] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.232722] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.232723] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.232724] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.232726] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.232727] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.232728] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.232729] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.232730] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.232731] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.232732] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.232733] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.232735] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.232736] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.232764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.232877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.232904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.232928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.232953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.P9PE._PRT] [ 0.232992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.233087] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.233227] pci0000:00: ACPI _OSC control (0x18) granted [ 0.235993] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.236053] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.236082] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.236111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.236141] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.236170] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 11 12 14 15) [ 0.236251] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.236253] vgaarb: loaded [ 0.236253] vgaarb: bridge control possible 0000:01:00.0 [ 0.236272] PCI: Using ACPI for IRQ routing [ 0.237649] PCI: pci_cache_line_size set to 64 bytes [ 0.237696] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.237697] e820: reserve RAM buffer [mem 0xddf3e000-0xdfffffff] [ 0.237699] e820: reserve RAM buffer [mem 0xde832000-0xdfffffff] [ 0.237700] e820: reserve RAM buffer [mem 0xdec95000-0xdfffffff] [ 0.237701] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.237702] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.237772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.237775] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.239783] Switching to clocksource hpet [ 0.240823] pnp: PnP ACPI init [ 0.240829] ACPI: bus type pnp registered [ 0.240999] pnp 00:00: [bus 00-3e] [ 0.241000] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.241001] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.241003] pnp 00:00: [io 0x0d00-0xffff window] [ 0.241004] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.241005] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.241006] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.241007] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.241008] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.241009] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.241010] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.241011] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.241012] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.241013] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.241014] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.241015] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.241016] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.241017] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.241018] pnp 00:00: [mem 0xe0000000-0xfeafffff window] [ 0.241019] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.241049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.241066] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.241085] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.241087] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.241093] pnp 00:02: [io 0x0000-0x001f] [ 0.241094] pnp 00:02: [io 0x0081-0x0091] [ 0.241095] pnp 00:02: [io 0x0093-0x009f] [ 0.241096] pnp 00:02: [io 0x00c0-0x00df] [ 0.241097] pnp 00:02: [dma 4] [ 0.241109] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.241114] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.241125] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.241173] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.241185] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.241192] pnp 00:05: [io 0x002e-0x002f] [ 0.241193] pnp 00:05: [io 0x004e-0x004f] [ 0.241194] pnp 00:05: [io 0x0061] [ 0.241195] pnp 00:05: [io 0x0063] [ 0.241196] pnp 00:05: [io 0x0065] [ 0.241196] pnp 00:05: [io 0x0067] [ 0.241197] pnp 00:05: [io 0x0070] [ 0.241198] pnp 00:05: [io 0x0080] [ 0.241199] pnp 00:05: [io 0x0092] [ 0.241200] pnp 00:05: [io 0x00b2-0x00b3] [ 0.241201] pnp 00:05: [io 0x0680-0x069f] [ 0.241202] pnp 00:05: [io 0x1000-0x100f] [ 0.241203] pnp 00:05: [io 0xffff] [ 0.241204] pnp 00:05: [io 0xffff] [ 0.241205] pnp 00:05: [io 0x0400-0x0453] [ 0.241206] pnp 00:05: [io 0x0458-0x047f] [ 0.241207] pnp 00:05: [io 0x0500-0x057f] [ 0.241208] pnp 00:05: [io 0x164e-0x164f] [ 0.241230] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.241231] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.241233] system 00:05: [io 0xffff] has been reserved [ 0.241234] system 00:05: [io 0xffff] has been reserved [ 0.241235] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.241236] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.241238] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.241239] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.241240] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241245] pnp 00:06: [io 0x0070-0x0077] [ 0.241250] pnp 00:06: [irq 8] [ 0.241261] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.241278] pnp 00:07: [io 0x0454-0x0457] [ 0.241297] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.241298] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.241338] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.241339] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.241340] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.241341] pnp 00:08: [io 0x0290-0x029f] [ 0.241342] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.241362] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.241363] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241376] pnp 00:09: [io 0x0010-0x001f] [ 0.241377] pnp 00:09: [io 0x0022-0x003f] [ 0.241378] pnp 00:09: [io 0x0044-0x005f] [ 0.241379] pnp 00:09: [io 0x0062-0x0063] [ 0.241380] pnp 00:09: [io 0x0065-0x006f] [ 0.241381] pnp 00:09: [io 0x0072-0x007f] [ 0.241382] pnp 00:09: [io 0x0080] [ 0.241383] pnp 00:09: [io 0x0084-0x0086] [ 0.241384] pnp 00:09: [io 0x0088] [ 0.241385] pnp 00:09: [io 0x008c-0x008e] [ 0.241386] pnp 00:09: [io 0x0090-0x009f] [ 0.241386] pnp 00:09: [io 0x00a2-0x00bf] [ 0.241387] pnp 00:09: [io 0x00e0-0x00ef] [ 0.241388] pnp 00:09: [io 0x04d0-0x04d1] [ 0.241410] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.241411] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241416] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.241419] pnp 00:0a: [irq 13] [ 0.241432] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.241591] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.241595] pnp 00:0b: [irq 4] [ 0.241596] pnp 00:0b: [dma 0 disabled] [ 0.241629] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.241762] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 0.241763] pnp 00:0c: [mem 0xfed10000-0xfed17fff] [ 0.241764] pnp 00:0c: [mem 0xfed18000-0xfed18fff] [ 0.241765] pnp 00:0c: [mem 0xfed19000-0xfed19fff] [ 0.241766] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.241767] pnp 00:0c: [mem 0xfed20000-0xfed3ffff] [ 0.241768] pnp 00:0c: [mem 0xfed90000-0xfed93fff] [ 0.241769] pnp 00:0c: [mem 0xfed45000-0xfed8ffff] [ 0.241770] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 0.241771] pnp 00:0c: [mem 0xfee00000-0xfeefffff] [ 0.241772] pnp 00:0c: [mem 0xe0000000-0xe0000fff] [ 0.241806] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.241807] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.241809] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.241810] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.241812] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.241814] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.241815] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.241816] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.241817] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 0.241819] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.241820] system 00:0c: [mem 0xe0000000-0xe0000fff] has been reserved [ 0.241822] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241904] pnp: PnP ACPI: found 13 devices [ 0.241905] ACPI: ACPI bus type pnp unregistered [ 0.247418] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.247420] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.247422] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.247424] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.247426] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.247443] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.247445] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.247451] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.247455] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 0.247474] pci 0000:00:1c.5: PCI bridge to [bus 04-05] [ 0.247509] pci 0000:04:00.0: setting latency timer to 64 [ 0.247512] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.247513] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.247514] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.247515] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.247516] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.247517] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.247518] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.247519] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.247520] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.247521] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.247523] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.247524] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.247525] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.247526] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.247527] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.247528] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.247529] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.247530] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.247531] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.247532] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.247533] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.247534] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff] [ 0.247535] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.247536] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.247537] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.247539] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7] [ 0.247540] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff] [ 0.247541] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff] [ 0.247542] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.247543] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.247544] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.247545] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff] [ 0.247546] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff] [ 0.247547] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff] [ 0.247548] pci_bus 0000:05: resource 17 [mem 0xe0000000-0xfeafffff] [ 0.247593] NET: Registered protocol family 2 [ 0.247703] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.248179] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.249085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.249193] TCP: Hash tables configured (established 524288 bind 65536) [ 0.249194] TCP: reno registered [ 0.249203] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.249224] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.249298] NET: Registered protocol family 1 [ 0.287776] pci 0000:01:00.0: Boot video device [ 0.287803] PCI: CLS 64 bytes, default 64 [ 0.287827] Unpacking initramfs... [ 0.443191] Freeing initrd memory: 11808k freed [ 0.444062] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.444064] software IO TLB [mem 0xd9f3e000-0xddf3dfff] (64MB) mapped at [ffff8800d9f3e000-ffff8800ddf3dfff] [ 0.444383] audit: initializing netlink socket (disabled) [ 0.444390] type=2000 audit(1349114233.336:1): initialized [ 0.454707] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.455238] VFS: Disk quotas dquot_6.5.2 [ 0.455255] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.455301] msgmni has been set to 15919 [ 0.455397] alg: No test for stdrng (krng) [ 0.455413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.455415] io scheduler noop registered [ 0.455415] io scheduler deadline registered [ 0.455431] io scheduler cfq registered (default) [ 0.455492] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.455651] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.455662] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.455662] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.455895] intel_idle: does not run on family 6 model 58 [ 0.455910] GHES: HEST is not enabled! [ 0.455940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.476312] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.496882] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.497041] Linux agpgart interface v0.103 [ 0.497143] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.499260] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.499263] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.499334] mousedev: PS/2 mouse device common for all mice [ 0.499364] rtc_cmos 00:06: RTC can wake from S4 [ 0.499464] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.499487] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.499492] cpuidle: using governor ladder [ 0.499493] cpuidle: using governor menu [ 0.499508] drop_monitor: Initializing network drop monitor service [ 0.499570] TCP: cubic registered [ 0.499613] NET: Registered protocol family 10 [ 0.499729] mip6: Mobile IPv6 [ 0.499731] NET: Registered protocol family 17 [ 0.499737] Key type dns_resolver registered [ 0.499805] PM: Hibernation image not present or could not be loaded. [ 0.499811] registered taskstats version 1 [ 0.500231] rtc_cmos 00:06: setting system clock to 2012-10-01 17:57:14 UTC (1349114234) [ 0.500897] Freeing unused kernel memory: 580k freed [ 0.500946] Write protecting the kernel read-only data: 6144k [ 0.502284] Freeing unused kernel memory: 592k freed [ 0.503726] Freeing unused kernel memory: 632k freed [ 0.541360] udevd[61]: starting version 175 [ 0.550745] ACPI: bus type usb registered [ 0.550764] usbcore: registered new interface driver usbfs [ 0.550770] usbcore: registered new interface driver hub [ 0.553118] SCSI subsystem initialized [ 0.553646] ACPI: Fan [FAN0] (off) [ 0.553674] ACPI: Fan [FAN1] (off) [ 0.553696] ACPI: Fan [FAN2] (off) [ 0.553718] ACPI: Fan [FAN3] (off) [ 0.553742] ACPI: Fan [FAN4] (off) [ 0.557415] usbcore: registered new device driver usb [ 0.557643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.557676] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.557679] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.557683] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.557705] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.559182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.559327] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 0.559459] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c74000, 10:bf:48:bc:41:8b, XID 0c900800 IRQ 41 [ 0.559461] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.561599] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.561624] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7118000 [ 0.563312] libata version 3.00 loaded. [ 0.571490] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.571526] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.571527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.571529] usb usb1: Product: EHCI Host Controller [ 0.571530] usb usb1: Manufacturer: Linux 3.5-trunk-amd64 ehci_hcd [ 0.571530] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.571682] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.572965] hub 1-0:1.0: USB hub found [ 0.572969] hub 1-0:1.0: 2 ports detected [ 0.573039] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.573042] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.573045] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.573065] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.573067] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.573068] ACPI: Thermal Zone [TZ00] (28 C) [ 0.573177] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.573178] ACPI: Thermal Zone [TZ01] (30 C) [ 0.576932] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.576937] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7117000 [ 0.587459] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.587479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.587482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.587484] usb usb2: Product: EHCI Host Controller [ 0.587487] usb usb2: Manufacturer: Linux 3.5-trunk-amd64 ehci_hcd [ 0.587489] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.587573] hub 2-0:1.0: USB hub found [ 0.587575] hub 2-0:1.0: 2 ports detected [ 0.587613] ahci 0000:00:1f.2: version 3.0 [ 0.587655] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.603459] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 0.603464] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.603468] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.619718] scsi0 : ahci [ 0.619781] scsi1 : ahci [ 0.619818] scsi2 : ahci [ 0.619858] scsi3 : ahci [ 0.619894] scsi4 : ahci [ 0.619931] scsi5 : ahci [ 0.620097] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 42 [ 0.620099] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 42 [ 0.620100] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 42 [ 0.620101] ata4: DUMMY [ 0.620102] ata5: DUMMY [ 0.620102] ata6: DUMMY [ 0.620136] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.620139] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.620142] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.620235] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.620245] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7100000 [ 0.620282] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X [ 0.620319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.620320] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.620321] usb usb3: Product: xHCI Host Controller [ 0.620322] usb usb3: Manufacturer: Linux 3.5-trunk-amd64 xhci_hcd [ 0.620323] usb usb3: SerialNumber: 0000:00:14.0 [ 0.620377] xHCI xhci_add_endpoint called for root hub [ 0.620378] xHCI xhci_check_bandwidth called for root hub [ 0.620393] hub 3-0:1.0: USB hub found [ 0.620401] hub 3-0:1.0: 4 ports detected [ 0.620441] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.620443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.620456] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.620458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.620459] usb usb4: Product: xHCI Host Controller [ 0.620460] usb usb4: Manufacturer: Linux 3.5-trunk-amd64 xhci_hcd [ 0.620460] usb usb4: SerialNumber: 0000:00:14.0 [ 0.620503] xHCI xhci_add_endpoint called for root hub [ 0.620504] xHCI xhci_check_bandwidth called for root hub [ 0.620517] hub 4-0:1.0: USB hub found [ 0.620523] hub 4-0:1.0: 4 ports detected [ 0.883167] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 0.939131] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.939160] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.939192] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.939797] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.939804] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215c8fc90), AE_NOT_FOUND (20120320/psparse-536) [ 0.939822] ata3.00: ATAPI: TSSTcorpDVD-ROM SH-D163A, SB01, max UDMA/33 [ 0.940546] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.940551] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215c8fc90), AE_NOT_FOUND (20120320/psparse-536) [ 0.940562] ata3.00: configured for UDMA/33 [ 0.940641] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.940645] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880215c8fd08), AE_NOT_FOUND (20120320/psparse-536) [ 0.940810] ata2.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133 [ 0.940813] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.942346] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.942350] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880215c8fd08), AE_NOT_FOUND (20120320/psparse-536) [ 0.943506] ata2.00: configured for UDMA/133 [ 0.949950] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.949954] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880215c8fd80), AE_NOT_FOUND (20120320/psparse-536) [ 0.950740] ata1.00: ATA-8: Zalman SSD0060F1, 3.3.2, max UDMA/133 [ 0.950742] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.959938] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359) [ 0.959943] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880215c8fd80), AE_NOT_FOUND (20120320/psparse-536) [ 0.960731] ata1.00: configured for UDMA/133 [ 0.960828] scsi 0:0:0:0: Direct-Access ATA Zalman SSD0060F1 3.3. PQ: 0 ANSI: 5 [ 0.960934] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALX-009 15.0 PQ: 0 ANSI: 5 [ 0.961479] scsi 2:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163A SB01 PQ: 0 ANSI: 5 [ 0.963757] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.963777] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.963816] sd 0:0:0:0: [sda] Write Protect is off [ 0.963819] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.963827] sd 1:0:0:0: [sdb] Write Protect is off [ 0.963828] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.963832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.963845] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.964297] sda: sda1 sda2 [ 0.964484] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.964520] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 0.964523] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.964591] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.965479] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.965521] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.965541] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 0.994833] sdb: sdb1 sdb2 < sdb5 > [ 0.994992] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.015348] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.015352] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.015608] hub 1-1:1.0: USB hub found [ 1.015719] hub 1-1:1.0: 6 ports detected [ 1.126938] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.138388] device-mapper: uevent: version 1.0.3 [ 1.138422] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.144411] PM: Starting manual resume from disk [ 1.144412] PM: Hibernation image partition 8:1 present [ 1.144413] PM: Looking for hibernation image. [ 1.144540] PM: Image not found (code -22) [ 1.144543] PM: Hibernation image not present or could not be loaded. [ 1.153336] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.259104] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.259107] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.259244] hub 2-1:1.0: USB hub found [ 1.259351] hub 2-1:1.0: 8 ports detected [ 1.277251] udevd[422]: starting version 175 [ 1.319818] ACPI: Requesting acpi_cpufreq [ 1.320465] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.320469] ACPI: Power Button [PWRB] [ 1.329695] Monitor-Mwait will be used to enter C-1 state [ 1.333090] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 1.333095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.333096] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 1.333098] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 1.333100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.333102] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 1.333104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.333105] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.333298] Monitor-Mwait will be used to enter C-2 state [ 1.333520] Monitor-Mwait will be used to enter C-3 state [ 1.333532] ACPI: acpi_idle registered with cpuidle [ 1.334014] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 1.334034] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251) [ 1.334037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.336793] [drm] Initialized drm 1.1.0 20060810 [ 1.339472] wmi: Mapper loaded [ 1.339497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.339501] ACPI: Power Button [PWRF] [ 1.341659] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 1.347321] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d9000a1) [ 1.347714] [drm] nouveau 0000:01:00.0: acceleration disabled by default, pass noaccel=0 to force enable [ 1.349180] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 1.351666] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 1.352478] kvm: disabled by bios [ 1.362878] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 1.364976] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 1.366038] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 1.367290] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.365983] asus_wmi: ASUS WMI generic driver loaded [ 1.367897] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9 [ 1.367932] asus_wmi: SFUN value: 0x0<6>[ 1.368086] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3 [ 1.402144] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 1.402189] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 1.402227] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 1.402257] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 1.402288] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 1.426553] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.426554] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 1.426556] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 1.426557] [drm] nouveau 0000:01:00.0: Bios version 75.19.36.00 [ 1.426559] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 1.426747] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 1.426749] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 1.426751] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000000 [ 1.426752] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030 [ 1.426753] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011362 00020010 [ 1.426754] [drm] nouveau 0000:01:00.0: DCB outp 03: 04022310 00000000 [ 1.426756] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030 [ 1.426757] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161 [ 1.426758] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200 [ 1.426762] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x7383 [ 1.476501] [drm] nouveau 0000:01:00.0: 0x799B: Condition still not met after 20ms, skipping following opcodes [ 1.476513] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7A04 [ 1.483351] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x89B4 [ 1.483352] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x89B5 [ 1.483396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8AA6 [ 1.483397] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8B0B [ 1.503223] [drm] nouveau 0000:01:00.0: 0x7330: Condition still not met after 20ms, skipping following opcodes [ 1.503239] Refined TSC clocksource calibration: 3410.014 MHz. [ 1.503241] Switching to clocksource tsc [ 1.506889] [TTM] Zone kernel: Available graphics memory: 4076256 kiB [ 1.506891] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.506892] [TTM] Initializing pool allocator [ 1.506895] [TTM] Initializing DMA pool allocator [ 1.506903] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3) [ 1.506908] mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining [ 1.506918] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 1.510610] kvm: disabled by bios [ 1.510789] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.510791] [drm] No driver support for vblank timestamp query. [ 1.516369] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 1.516372] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz voltage 900mV [ 1.516375] [drm] nouveau 0000:01:00.0: 3: core 810MHz shader 1620MHz memory 667MHz voltage 1040mV [ 1.516377] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz voltage 900mV [ 1.567249] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0xe0000, bo ffff880212927400 [ 1.567360] fbcon: nouveaufb (fb0) is primary device [ 1.574701] usb 2-1.5: new low-speed USB device number 3 using ehci_hcd [ 1.641298] Console: switching to colour frame buffer device 210x65 [ 1.646302] fb0: nouveaufb frame buffer device [ 1.646303] drm: registered panic notifier [ 1.646305] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 1.646360] hda_intel: Disabling MSI [ 1.646369] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client [ 1.672984] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 1.672989] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.672991] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 1.672994] usb 2-1.5: Manufacturer: Microsoft [ 1.692030] usbcore: registered new interface driver usbhid [ 1.692033] usbhid: USB HID core driver [ 1.694686] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9 [ 1.694948] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 1.746542] usb 2-1.6: new low-speed USB device number 4 using ehci_hcd [ 1.845068] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c315 [ 1.845073] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.845075] usb 2-1.6: Product: Logitech USB Keyboard [ 1.845078] usb 2-1.6: Manufacturer: Logitech [ 1.848777] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input10 [ 1.849012] hid-generic 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input0 [ 2.098096] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 2.098254] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 2.606308] Adding 5858292k swap on /dev/sda1. Priority:-1 extents:1 across:5858292k SS [ 2.621554] EXT4-fs (sda2): re-mounted. Opts: (null) [ 2.650843] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.736016] fuse init (API version 7.19) [ 2.744433] loop: module loaded [ 3.348224] kjournald starting. Commit interval 5 seconds [ 3.348815] EXT3-fs (dm-2): using internal journal [ 3.348818] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 4.253187] Bluetooth: Core ver 2.16 [ 4.253196] NET: Registered protocol family 31 [ 4.253197] Bluetooth: HCI device and connection manager initialized [ 4.253198] Bluetooth: HCI socket layer initialized [ 4.253198] Bluetooth: L2CAP socket layer initialized [ 4.253200] Bluetooth: SCO socket layer initialized [ 4.255166] Bluetooth: RFCOMM TTY layer initialized [ 4.255169] Bluetooth: RFCOMM socket layer initialized [ 4.255170] Bluetooth: RFCOMM ver 1.11 [ 4.271183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.271185] Bluetooth: BNEP filters: protocol multicast [ 4.280173] lp: driver loaded but no devices found [ 4.282153] ppdev: user-space parallel port driver [ 4.420684] r8169 0000:03:00.0: eth1: link down [ 4.421055] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.422223] r8169 0000:03:00.0: eth1: link down [ 5.986314] r8169 0000:03:00.0: eth1: link up [ 5.986726] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 35.872333] usb 2-1.5: USB disconnect, device number 3 [ 36.077134] usb 2-1.5: new low-speed USB device number 5 using ehci_hcd [ 36.175162] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 36.175166] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.175169] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 36.175171] usb 2-1.5: Manufacturer: Microsoft [ 36.180240] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13 [ 36.180593] hid-generic 0003:045E:00A4.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 3087.984067] usb 2-1.5: USB disconnect, device number 5 [ 3088.185372] usb 2-1.5: new low-speed USB device number 6 using ehci_hcd [ 3088.283899] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 3088.283904] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3088.283907] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 3088.283909] usb 2-1.5: Manufacturer: Microsoft [ 3088.288977] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14 [ 3088.289211] hid-generic 0003:045E:00A4.0004: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 4122.745595] usb 2-1.5: USB disconnect, device number 6 [ 4122.950148] usb 2-1.5: new low-speed USB device number 7 using ehci_hcd [ 4123.048424] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 4123.048428] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4123.048431] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 4123.048433] usb 2-1.5: Manufacturer: Microsoft [ 4123.053504] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input15 [ 4123.053739] hid-generic 0003:045E:00A4.0005: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 5765.423127] usb 2-1.5: USB disconnect, device number 7 [ 5765.631425] usb 2-1.5: new low-speed USB device number 8 using ehci_hcd [ 5765.730077] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 5765.730082] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5765.730084] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 5765.730087] usb 2-1.5: Manufacturer: Microsoft [ 5765.735287] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input16 [ 5765.735618] hid-generic 0003:045E:00A4.0006: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 8276.625165] usb 2-1.5: USB disconnect, device number 8 [ 8276.830839] usb 2-1.5: new low-speed USB device number 9 using ehci_hcd [ 8276.928992] usb 2-1.5: New USB device found, idVendor=045e, idProduct=00a4 [ 8276.928997] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8276.928999] usb 2-1.5: Product: Microsoft(R) Compact Optical Mouse [ 8276.929001] usb 2-1.5: Manufacturer: Microsoft [ 8276.934076] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input17 [ 8276.934434] hid-generic 0003:045E:00A4.0007: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.0-1.5/input0
Attachment:
kern.log.20121001-232320.gz
Description: Binary data