Your message dated Fri, 31 Aug 2012 08:59:40 -0700 with message-id <1346428780.13980.7.camel@deadeye.wl.decadent.org.uk> and subject line Re: AW: Bug#685595: linux-image-2.6.32-5-amd64: kernel errors, bad page states occurred frequently (around once per minute) has caused the Debian Bug report #685595, regarding linux-image-2.6.32-5-amd64: kernel errors, bad page states occured frequently (around once per minute) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 685595: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=685595 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: kernel errors, bad page states occured frequently (around once per minute)
- From: romeyke <andreas.romeyke@slub-dresden.de>
- Date: Wed, 22 Aug 2012 11:32:36 +0200
- Message-id: <[🔎] 20120822093236.2106.95795.reportbug@bdv218.slub-dresden.de>
Package: linux-2.6 Version: 2.6.32-45 Severity: important After a clean debian installation this errors occurs -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=6be90ed5-4e01-4de2-9b0c-60c47ea2db4f ro quiet ** Tainted: BD (160) * System has hit bad_page. * Kernel has oopsed before. ** Kernel log: [ 29.953429] [<ffffffff810e60a1>] ? virt_to_head_page+0x9/0x2a [ 29.953439] [<ffffffff8118fb03>] ? kobject_get+0x12/0x17 [ 29.953446] [<ffffffff811845ec>] ? get_disk+0x95/0xb4 [ 29.953457] [<ffffffffa013133c>] ? sr_block_ioctl+0x49/0x85 [sr_mod] [ 29.953465] [<ffffffff8118395d>] ? __blkdev_driver_ioctl+0x69/0x7e [ 29.953472] [<ffffffff81184158>] ? blkdev_ioctl+0x7e6/0x836 [ 29.953480] [<ffffffff81113038>] ? blkdev_open+0x7e/0x96 [ 29.953488] [<ffffffff810ed969>] ? __dentry_open+0x1c4/0x2bf [ 29.953498] [<ffffffff810f91a3>] ? do_filp_open+0x4e4/0x94b [ 29.953509] [<ffffffffa0124fce>] ? cdrom_release+0x1ae/0x1fe [cdrom] [ 29.953518] [<ffffffff81111e02>] ? block_ioctl+0x38/0x3c [ 29.953526] [<ffffffff810fae8e>] ? vfs_ioctl+0x21/0x6c [ 29.953534] [<ffffffff810fb3dc>] ? do_vfs_ioctl+0x48d/0x4cb [ 29.953542] [<ffffffff810e60a1>] ? virt_to_head_page+0x9/0x2a [ 29.953550] [<ffffffff810fb46b>] ? sys_ioctl+0x51/0x70 [ 29.953559] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b [ 29.953563] Code: Bad RIP value. [ 29.953567] RIP [<0000220000000000>] 0x220000000000 [ 29.953575] RSP <ffff8800ba063910> [ 29.953579] CR2: 0000220000000000 [ 29.953585] ---[ end trace d98824ee688590cf ]--- [ 67.646928] BUG: Bad page state in process bash pfn:ae3e7 [ 67.648094] page:ffffea000261da88 flags:0100000000000000 count:0 mapcount:0 mapping:0000ea0000000000 index:24ec [ 67.649371] Pid: 2004, comm: bash Tainted: G D 2.6.32-5-amd64 #1 [ 67.650737] Call Trace: [ 67.652152] [<ffffffff810b7d89>] ? bad_page+0x116/0x129 [ 67.653655] [<ffffffff810b9ea6>] ? get_page_from_freelist+0x4fd/0x760 [ 67.655257] [<ffffffff810ba470>] ? __alloc_pages_nodemask+0x11c/0x5fc [ 67.656886] [<ffffffff810b42ff>] ? find_get_page+0x1a/0x77 [ 67.658568] [<ffffffff8118e4e0>] ? cpumask_any_but+0x28/0x34 [ 67.660338] [<ffffffff810cb4ea>] ? do_wp_page+0x386/0x707 [ 67.662126] [<ffffffff810cd290>] ? handle_mm_fault+0x7aa/0x80f [ 67.663977] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 67.665890] [<ffffffff812ff2e6>] ? do_page_fault+0x2e0/0x2fc [ 67.667849] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 67.671083] BUG: Bad page state in process bash pfn:aeb2f [ 67.673234] page:ffffea0002637248 flags:0100000000000000 count:0 mapcount:0 mapping:0000ea0000000000 index:2446 [ 67.675503] Pid: 2004, comm: bash Tainted: G B D 2.6.32-5-amd64 #1 [ 67.677916] Call Trace: [ 67.680380] [<ffffffff810b7d89>] ? bad_page+0x116/0x129 [ 67.682918] [<ffffffff810b9ea6>] ? get_page_from_freelist+0x4fd/0x760 [ 67.685565] [<ffffffff810ba470>] ? __alloc_pages_nodemask+0x11c/0x5fc [ 67.688372] [<ffffffff810b42ff>] ? find_get_page+0x1a/0x77 [ 67.690976] [<ffffffff810b44ad>] ? lock_page+0x9/0x1f [ 67.693766] [<ffffffff810b4ae7>] ? filemap_fault+0xb9/0x2f6 [ 67.696621] [<ffffffff810cb4ea>] ? do_wp_page+0x386/0x707 [ 67.699489] [<ffffffff810403e2>] ? set_next_entity+0x34/0x56 [ 67.702422] [<ffffffff810cd290>] ? handle_mm_fault+0x7aa/0x80f [ 67.705433] [<ffffffff812ff2e6>] ? do_page_fault+0x2e0/0x2fc [ 67.708369] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 75.199119] BUG: Bad page state in process bash pfn:aeb57 [ 75.202566] page:ffffea0002637b08 flags:0100000000000000 count:0 mapcount:0 mapping:0000ea0000000000 index:2345 [ 75.206025] Pid: 2022, comm: bash Tainted: G B D 2.6.32-5-amd64 #1 [ 75.209709] Call Trace: [ 75.213415] [<ffffffff810b7d89>] ? bad_page+0x116/0x129 [ 75.217232] [<ffffffff810b9ea6>] ? get_page_from_freelist+0x4fd/0x760 [ 75.221065] [<ffffffff810ba470>] ? __alloc_pages_nodemask+0x11c/0x5fc [ 75.224993] [<ffffffff810b42ff>] ? find_get_page+0x1a/0x77 [ 75.228971] [<ffffffff8118e4e0>] ? cpumask_any_but+0x28/0x34 [ 75.233035] [<ffffffff810cb4ea>] ? do_wp_page+0x386/0x707 [ 75.237151] [<ffffffff810cd290>] ? handle_mm_fault+0x7aa/0x80f [ 75.241190] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 75.245412] [<ffffffff812ff2e6>] ? do_page_fault+0x2e0/0x2fc [ 75.249691] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 208.226833] BUG: Bad page state in process reportbug pfn:aac3f [ 208.232361] page:ffffea000255adc8 flags:0100000000000000 count:0 mapcount:0 mapping:0000ea0000000000 index:204b [ 208.237967] Pid: 2056, comm: reportbug Tainted: G B D 2.6.32-5-amd64 #1 [ 208.243537] Call Trace: [ 208.249160] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 208.254831] [<ffffffff810b7d89>] ? bad_page+0x116/0x129 [ 208.260399] [<ffffffff810b9ea6>] ? get_page_from_freelist+0x4fd/0x760 [ 208.266106] [<ffffffff810b3c33>] ? file_read_actor+0x33/0x12a [ 208.271807] [<ffffffff810ba470>] ? __alloc_pages_nodemask+0x11c/0x5fc [ 208.277436] [<ffffffff810ccd60>] ? handle_mm_fault+0x27a/0x80f [ 208.283280] [<ffffffff812ff2e6>] ? do_page_fault+0x2e0/0x2fc [ 208.289027] [<ffffffff812fd185>] ? page_fault+0x25/0x30 [ 486.449085] BUG: Bad page state in process console-kit-dae pfn:37a4f [ 486.449095] page:ffffea0000c2c148 flags:0100000000000000 count:0 mapcount:0 mapping:0000ea0000000000 index:ffff880037a4ff18 [ 486.449104] Pid: 1337, comm: console-kit-dae Tainted: G B D 2.6.32-5-amd64 #1 [ 486.449109] Call Trace: [ 486.449121] [<ffffffff810b7d89>] ? bad_page+0x116/0x129 [ 486.449129] [<ffffffff810b9ea6>] ? get_page_from_freelist+0x4fd/0x760 [ 486.449138] [<ffffffff810ba470>] ? __alloc_pages_nodemask+0x11c/0x5fc [ 486.449148] [<ffffffff810ca933>] ? pmd_alloc+0x17/0x5b [ 486.449154] [<ffffffff810ceb5f>] ? copy_page_range+0x652/0x711 [ 486.449163] [<ffffffff810e6e35>] ? new_slab+0x42/0x1ca [ 486.449170] [<ffffffff810e71ad>] ? __slab_alloc+0x1f0/0x39b [ 486.449177] [<ffffffff8104c1df>] ? dup_mm+0x1c3/0x40a [ 486.449183] [<ffffffff8104c1df>] ? dup_mm+0x1c3/0x40a [ 486.449190] [<ffffffff810e7688>] ? kmem_cache_alloc+0x7f/0xf0 [ 486.449196] [<ffffffff8104c1df>] ? dup_mm+0x1c3/0x40a [ 486.449204] [<ffffffff810afede>] ? perf_event_init_task+0x46/0x255 [ 486.449211] [<ffffffff8104ce97>] ? copy_process+0xa3c/0x1165 [ 486.449237] [<ffffffffa01a7e4f>] ? ext3_readdir+0x1bd/0x54d [ext3] [ 486.449246] [<ffffffff810fb810>] ? filldir+0x0/0xb7 [ 486.449252] [<ffffffff8104d717>] ? do_fork+0x157/0x31e [ 486.449259] [<ffffffff811021c5>] ? alloc_fd+0x67/0x10c [ 486.449265] [<ffffffff810ed523>] ? fd_install+0x2e/0x5a [ 486.449273] [<ffffffff81010e63>] ? stub_clone+0x13/0x20 [ 486.449279] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b ** Model information sys_vendor: Hewlett-Packard product_name: HP dx5150 MT(PE679AV) product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Phoenix Technologies, LTD bios_version: 1.06 board_vendor: MSI board_name: 09AC board_version: ** Loaded modules: Module Size Used by powernow_k8 10978 0 cpufreq_powersave 902 0 cpufreq_stats 2740 0 cpufreq_conservative 5162 0 cpufreq_userspace 1992 0 ppdev 5030 0 lp 7462 0 sco 7225 2 bridge 39646 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29629 0 l2cap 24752 6 bnep,rfcomm bluetooth 41827 6 sco,bnep,rfcomm,l2cap rfkill 13044 2 bluetooth binfmt_misc 6431 1 fuse 50924 1 ext4 288382 1 jbd2 67111 1 ext4 crc16 1319 2 l2cap,ext4 loop 11799 0 snd_atiixp 11221 0 snd_ac97_codec 99186 1 snd_atiixp ac97_bus 1086 1 snd_ac97_codec snd_pcm 60487 2 snd_atiixp,snd_ac97_codec snd_seq 42881 0 snd_timer 15598 2 snd_pcm,snd_seq snd_seq_device 4493 1 snd_seq i2c_piix4 8328 0 radeon 574908 2 edac_core 29261 0 edac_mce_amd 6433 0 snd 46526 6 snd_atiixp,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device parport_pc 18855 1 ttm 40162 1 radeon drm_kms_helper 20369 1 radeon drm 142352 4 radeon,ttm,drm_kms_helper i2c_algo_bit 4209 1 radeon soundcore 4598 1 snd snd_page_alloc 6249 2 snd_atiixp,snd_pcm i2c_core 15819 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit k8temp 3283 0 shpchp 26248 0 pci_hotplug 21587 1 shpchp parport 27954 3 ppdev,lp,parport_pc evdev 7352 6 button 4650 0 processor 29935 1 powernow_k8 pcspkr 1699 0 psmouse 49985 0 serio_raw 3752 0 ext3 106710 4 jbd 37317 1 ext3 mbcache 5050 2 ext4,ext3 sd_mod 29937 7 crc_t10dif 1276 1 sd_mod sg 24069 0 usbhid 33292 0 hid 63257 1 usbhid sr_mod 12602 0 cdrom 29351 1 sr_mod ata_generic 3239 0 sata_sil 7412 7 pata_atiixp 3489 0 tg3 104334 0 ohci_hcd 19343 0 thermal 11674 0 libphy 14054 1 tg3 floppy 49087 0 libata 133776 3 ata_generic,sata_sil,pata_atiixp thermal_sys 11942 2 processor,thermal ehci_hcd 32097 0 scsi_mod 126725 4 sd_mod,sg,sr_mod,libata usbcore 123122 4 usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 #NetworkManager#iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:13:d3:8e:aa:09 brd ff:ff:ff:ff:ff:ff inet 194.95.144.218/24 brd 194.95.144.255 scope global eth0 inet6 fe80::213:d3ff:fe8e:aa09/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether be:6d:57:9c:ff:2f brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 560 8 0 0 0 0 0 0 560 8 0 0 0 0 0 0 eth0: 1010352 10643 0 0 0 0 0 1 17257 90 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 1075 total packets received 0 forwarded 0 incoming packets discarded 1075 incoming packets delivered 70 requests sent out 16 dropped because of missing route Icmp: 1 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo replies: 1 1 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo request: 1 IcmpMsg: InType0: 1 OutType8: 1 Tcp: 3 active connections openings 0 passive connection openings 0 failed connection attempts 0 connection resets received 0 connections established 20 segments received 21 segments send out 0 segments retransmited 0 bad segments received. 2 resets sent Udp: 38 packets received 0 packets to unknown port received. 0 packet receive errors 46 packets sent UdpLite: TcpExt: 1 TCP sockets finished time wait in fast timer 6 packet headers predicted 6 acknowledgments not containing data payload received IpExt: InMcastPkts: 10 OutMcastPkts: 11 InBcastPkts: 1025 InOctets: 176530 OutOctets: 11888 InMcastOctets: 2662 OutMcastOctets: 2675 InBcastOctets: 155914 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 3: Memory at <ignored> (64-bit, non-prefetchable) 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000c8000000-00000000d7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdb00000-fdbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at fc00 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f400 [size=8] Region 3: I/O ports at f000 [size=4] Region 4: I/O ports at ec00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at c0000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: sata_sil 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0500 [size=16] Region 1: Memory at fe02b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (prog-if 82 [Master PriP]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at e400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: fdc00000-fdcfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ATI IXP AC97 controller 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] [1002:5954] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at cc00 [size=256] Region 2: Memory at fdaf0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fda00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:05.1 Display controller [0380]: ATI Technologies Inc Radeon Xpress Series (RS480) [1002:5854] Subsystem: Hewlett-Packard Company Device [103c:3008] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at c8000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: Memory at fdae0000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 20) Subsystem: Hewlett-Packard Company Device [103c:3009] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-45 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-45 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.28+squeeze1 Binary firmware for various driver ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--- End Message ---
--- Begin Message ---
- To: 685595-done@bugs.debian.org
- Subject: Re: AW: Bug#685595: linux-image-2.6.32-5-amd64: kernel errors, bad page states occurred frequently (around once per minute)
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Fri, 31 Aug 2012 08:59:40 -0700
- Message-id: <1346428780.13980.7.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <EE198826B5CB824FAD655FAF956651684ACCEF9C4F@SLUBMAIL.slub-dresden.de>
- References: <[🔎] 20120822093236.2106.95795.reportbug@bdv218.slub-dresden.de> <[🔎] 1346346426.17040.22.camel@deadeye.wl.decadent.org.uk> <EE198826B5CB824FAD655FAF956651684ACCEF9C4F@SLUBMAIL.slub-dresden.de>
On Fri, 2012-08-31 at 12:15 +0200, Romeyke, Andreas wrote: > Hello Ben, > > >> After a clean debian installation this errors occurs > >>[...] > >Please send the *first* error trace, which will include the text 'Not tainted'. > > You could close this bug-report. The mainboard was died 2 hours later. > The board was unable to finish the BIOS-procedure while booting anymore. > > The problem was not in the RAM nor a heat problem, but in the chipset, I think. > > I am so sorry to waste your time. OK, closing. Ben. -- Ben Hutchings Theory and practice are closer in theory than in practice. - John Levine, moderator of comp.compilersAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---