Your message dated Sun, 12 Aug 2012 14:43:38 +0100 with message-id <1344779018.824.25.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#684569: linux-image-3.5-trunk-686-pae: microcode module loaded on Celeron CPU has caused the Debian Bug report #684569, regarding linux-image-3.5-trunk-686-pae: microcode module loaded on Celeron CPU to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 684569: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684569 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.5-trunk-686-pae: microcode module loaded on Celeron CPU
- From: Paul Menzel <pm.debian@googlemail.com>
- Date: Sat, 11 Aug 2012 12:24:27 +0200
- Message-id: <[🔎] 1344680667.5674.24.camel@mattotaupa>
Package: src:linux Version: 3.5-1~experimental.1 Severity: normal Control: user debian-eeepc-devel@lists.alioth.debian.org Control: usertags -1 701 Dear Debian folks, testing Linux kernel 3.5-1~experimental.1 [1] from Debian experimental I noticed that the module `microcode` is loaded which has according to `/var/log/syslog` not been the case with Linux 3.2.y. [ 7.197429] [drm] initialized overlay support […] [ 7.342650] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba This is an ASUS Eee PC 701 4G [2] with an Intel Celeron processor. $ more /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Celeron(R) M processor 900MHz stepping : 8 microcode : 0x20 cpu MHz : 630.097 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts bogomips : 1260.19 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual There are several descriptions but one is »AMD Microcode Update Driver«, but looking at the source it also has a component to work with Intel processors. $ sudo modinfo microcode filename: /lib/modules/3.5-trunk-686-pae/kernel/arch/x86/kernel/microcode.ko alias: devname:cpu/microcode alias: char-major-10-184 license: GPL author: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> description: Microcode Update Driver license: GPL author: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> description: Microcode Update Driver license: GPL v2 author: Peter Oruba description: AMD Microcode Update Driver alias: x86cpu:vendor:0002:family:*:model:*:feature:* alias: x86cpu:vendor:0000:family:*:model:*:feature:* depends: intree: Y vermagic: 3.5-trunk-686-pae SMP mod_unload modversions 686 So to summarize I think, this module should not be loaded automatically for this Celeron processor, which is not need for operation. Commit 78ff123b [1] commit 78ff123b05fb15beb1ad670372eea0d299d0b8af Author: Andi Kleen <ak@linux.intel.com> Date: Thu Jan 26 00:09:13 2012 +0100 is likely the one introducing this behavior. $ git describe 78ff123b05fb15beb1ad670372eea0d299d0b8af v3.3-rc1-38-g78ff123 Thanks, Paul [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=78ff123b05fb15beb1ad670372eea0d299d0b8af -- Package-specific info: ** Version: Linux version 3.5-trunk-686-pae (Debian 3.5-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Aug 2 17:56:18 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.5-trunk-686-pae root=UUID=b33ef3d8-b6d8-481d-a9a3-0050047ab9b0 ro quiet noisapnp ** Not tainted ** Kernel log: [ 2.112230] ata2.00: configured for UDMA/66 [ 2.112610] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 [ 2.133133] sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) [ 2.133316] sd 1:0:0:0: [sda] Write Protect is off [ 2.133327] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.133403] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.135947] sda: sda1 [ 2.137146] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.144709] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.236088] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 2.276134] Refined TSC clocksource calibration: 630.064 MHz. [ 2.276155] Switching to clocksource tsc [ 2.295504] kjournald starting. Commit interval 5 seconds [ 2.295571] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.369423] usb 1-5: New USB device found, idVendor=0951, idProduct=1606 [ 2.369440] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.369451] usb 1-5: Product: UB6225 [ 2.369459] usb 1-5: Manufacturer: ENE [ 2.369467] usb 1-5: SerialNumber: 146030377350 [ 2.480161] usb 1-8: new high-speed USB device number 4 using ehci_hcd [ 2.613176] usb 1-8: New USB device found, idVendor=eb1a, idProduct=2761 [ 2.613192] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.980091] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 3.160058] usb 3-1: New USB device found, idVendor=046d, idProduct=c312 [ 3.160075] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.160084] usb 3-1: Product: USB Multimedia Keyboard [ 3.160093] usb 3-1: Manufacturer: LITEON Technology [ 5.931695] udevd[308]: starting version 175 [ 6.253034] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 6.261294] Marking TSC unstable due to TSC halts in idle [ 6.261341] ACPI: acpi_idle registered with cpuidle [ 6.264135] ACPI: Lid Switch [LID] [ 6.264375] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 6.264394] ACPI: Sleep Button [SLPB] [ 6.264599] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 6.264611] ACPI: Power Button [PWRB] [ 6.264814] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 6.264825] ACPI: Power Button [PWRF] [ 6.279350] Switching to clocksource hpet [ 6.377129] eeepc_laptop: Eee PC Hotkey Driver [ 6.377147] eeepc_laptop: model 701 does not officially support setting cpu speed [ 6.377153] eeepc_laptop: cpufv disabled to avoid instability [ 6.377176] eeepc_laptop: Hotkey init flags 0x41 [ 6.378202] eeepc_laptop: Get control methods supported: 0x101711 [ 6.446035] ACPI: AC Adapter [AC0] (on-line) [ 6.446323] ACPI: Battery Slot [BAT0] (battery absent) [ 6.448793] [drm] Initialized drm 1.1.0 20060810 [ 6.466301] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 6.466537] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 6.467784] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6 [ 6.669284] eeepc_laptop: BIOS says wireless lan is blocked, but the pci device is present [ 6.669300] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model [ 6.670182] eeepc_laptop: Unable to find port [ 6.700886] i915 0000:00:02.0: setting latency timer to 64 [ 6.722152] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.722167] [drm] Driver supports precise vblank timestamp query. [ 6.723288] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.751580] intel_rng: FWH not detected [ 6.770040] usbcore: registered new interface driver uas [ 6.785384] usbcore: registered new interface driver usbhid [ 6.785394] usbhid: USB HID core driver [ 6.808100] Initializing USB Mass Storage driver... [ 6.848225] scsi2 : usb-storage 1-5:1.0 [ 6.848559] usbcore: registered new interface driver usb-storage [ 6.848567] USB Mass Storage support registered. [ 6.877229] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20 [ 7.197429] [drm] initialized overlay support [ 7.338218] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7 [ 7.340279] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.1-1/input0 [ 7.342650] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 7.723890] fbcon: inteldrmfb (fb0) is primary device [ 7.854184] Console: switching to colour frame buffer device 100x30 [ 7.862826] fb0: inteldrmfb frame buffer device [ 7.862833] drm: registered panic notifier [ 7.863787] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.863922] ACPI Warning: 0x00000860-0x0000087f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 7.863944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.863951] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 7.863960] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 7.863976] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.PMS0 2 (20120320/utaddress-251) [ 7.863992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.864027] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20120320/utaddress-251) [ 7.864044] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.864050] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.864946] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 7.883737] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0 [ 7.895059] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.895343] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 7.923607] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0 [ 7.935109] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 7.947764] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.948594] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.023933] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 9.002855] EXT3-fs (sda1): using internal journal [ 9.105005] loop: module loaded [ 11.894997] fuse init (API version 7.19) [ 13.551545] atl2 0000:03:00.0: irq 44 for MSI/MSI-X [ 13.551707] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 13.597596] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 # sudo modprobe -r microcode [ 218.031982] microcode: Microcode Update Driver: v2.00 removed. ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 1f900000-1fafffff Prefetchable memory behind bridge: 000000001fb00000-000000001fcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 000000001fd00000-000000001fefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 0400 [size=32] 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. L2 Fast Ethernet [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbfa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 -- System Information: Debian Release: wheezy/sid Architecture: i386 (i686) Kernel: Linux 3.5-trunk-686-pae (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.5-trunk-686-pae depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.107 ii kmod 9-1 ii linux-base 3.5 ii module-init-tools 9-1 Versions of packages linux-image-3.5-trunk-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-13 Versions of packages linux-image-3.5-trunk-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-22.1 pn linux-doc-3.5 <none> Versions of packages linux-image-3.5-trunk-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.5-trunk-686-pae/prerm/removing-running-kernel-3.5-trunk-686-pae: true linux-image-3.5-trunk-686-pae/postinst/depmod-error-initrd-3.5-trunk-686-pae: false linux-image-3.5-trunk-686-pae/postinst/ignoring-ramdisk: linux-image-3.5-trunk-686-pae/postinst/missing-firmware-3.5-trunk-686-pae:Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---
- To: 684569-done@bugs.debian.org
- Subject: Re: Bug#684569: linux-image-3.5-trunk-686-pae: microcode module loaded on Celeron CPU
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 12 Aug 2012 14:43:38 +0100
- Message-id: <1344779018.824.25.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20120812131028.GJ2644@tassilo.jf.intel.com>
- References: <[🔎] 1344680667.5674.24.camel@mattotaupa> <[🔎] 1344687820.824.8.camel@deadeye.wl.decadent.org.uk> <[🔎] 1344691039.5674.40.camel@mattotaupa> <[🔎] 20120812131028.GJ2644@tassilo.jf.intel.com>
This is not a bug. Ben. -- Ben Hutchings Sturgeon's Law: Ninety percent of everything is crap.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---