[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#680097: linux-image-3.2.0-2-686-pae: videoplayback causes total freeze



Package: src:linux
Version: 3.2.20-1
Severity: critical
Justification: causes serious data loss

Watching videos with VLC often leads to complete freeze of my machine.
Especially when pausing a video or rezising the window.

I have a workaround for this bug: At bootprompt i can add "radeon.modeset=0"
and then this crash will not happen anymore.

Here i added several complete /var/log folders from 4 crashes (all without my
workaround, obviously):

http://www.multiupload.nl/DO0BJCB1F2

The first 2 i prepared right after the crash. I did a hard reset of the machine
and booted right into recovery mode. From there i copied the whole /var/log
folder to crash1 and by the next freeze to crash2. I hope this will give you
valuable information.

Crash3 and crash 4 i did a normal cold start of the machine, entering graphical
mode directly (i.e. without first booting into recovery mode).

This bug is bugging me since 2.6.32. Please do something about it.



-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 18:27:04 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/hda9_crypt ro quiet

** Not tainted

** Kernel log:
[    1.563492] [drm]     DFP1: INTERNAL_TMDS1
[    1.563494] [drm] Connector 2:
[    1.563496] [drm]   S-video
[    1.563497] [drm]   Encoders:
[    1.563499] [drm]     TV1: INTERNAL_DAC2
[    1.563507] [drm] Possible lm63 thermal controller at 0x4c
[    1.596879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.596938] ohci_hcd 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    1.596972] ohci_hcd 0000:00:09.0: OHCI Host Controller
[    1.596995] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 5
[    1.597030] ohci_hcd 0000:00:09.0: irq 11, io mem 0xea000000
[    1.624060] Refined TSC clocksource calibration: 2071.022 MHz.
[    1.624072] Switching to clocksource tsc
[    1.692332] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.692336] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.692340] usb usb5: Product: OHCI Host Controller
[    1.692342] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[    1.692345] usb usb5: SerialNumber: 0000:00:09.0
[    1.692728] hub 5-0:1.0: USB hub found
[    1.692738] hub 5-0:1.0: 3 ports detected
[    1.692867] ohci_hcd 0000:00:09.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[    1.692909] ohci_hcd 0000:00:09.1: OHCI Host Controller
[    1.692925] ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 6
[    1.692958] ohci_hcd 0000:00:09.1: irq 5, io mem 0xea001000
[    1.714876] [drm] fb mappable at 0xD8040000
[    1.714879] [drm] vram apper at 0xD8000000
[    1.714881] [drm] size 5242880
[    1.714883] [drm] fb depth is 24
[    1.714885] [drm]    pitch is 5120
[    1.715020] fbcon: radeondrmfb (fb0) is primary device
[    1.818721] Console: switching to colour frame buffer device 160x64
[    1.818741] ata1.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100
[    1.818745] ata1.00: 976773168 sectors, multi 16: LBA48 
[    1.818912] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.818916] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.818919] usb usb6: Product: OHCI Host Controller
[    1.818921] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[    1.818924] usb usb6: SerialNumber: 0000:00:09.1
[    1.819245] hub 6-0:1.0: USB hub found
[    1.819255] hub 6-0:1.0: 2 ports detected
[    1.841061] fb0: radeondrmfb frame buffer device
[    1.841064] drm: registered panic notifier
[    1.841075] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[    1.880224] ata1.00: configured for UDMA/100
[    1.880461] scsi 0:0:0:0: Direct-Access     ATA      ST3500630A       3.AA PQ: 0 ANSI: 5
[    1.952047] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.044334] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL02, max UDMA/66
[    2.044343] ata2.00: limited to UDMA/33 due to 40-wire cable
[    2.060211] ata2.00: configured for UDMA/33
[    2.066891] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL02 PQ: 0 ANSI: 5
[    2.092863] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.092959] sd 0:0:0:0: [sda] Write Protect is off
[    2.092965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.092999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.099472] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.099480] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.100093] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.139935] usb 2-1: New USB device found, idVendor=046d, idProduct=08da
[    2.139939] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.176687]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    2.177932] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.190998] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.191472] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.032423] device-mapper: uevent: version 1.0.3
[    3.032909] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.196148] Intel AES-NI instructions are not detected.
[   13.475019] kjournald starting.  Commit interval 5 seconds
[   13.475051] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[   15.075705] udev[326]: starting version 164
[   15.815896] NET: Registered protocol family 23
[   16.115441] Marking TSC unstable due to TSC halts in idle
[   16.115459] ACPI: acpi_idle registered with cpuidle
[   16.117329] Switching to clocksource acpi_pm
[   16.468746] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 1065kHz
[   16.480342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.780129] parport_pc 00:09: reported by Plug and Play ACPI
[   16.780178] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.809197] Linux media interface: v0.10
[   16.827825] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   17.510071] Linux video capture interface: v2.00
[   17.576679] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   17.652319] gspca_main: v2.14.0 registered
[   17.768265] gspca_main: zc3xx-2.14.0 probing 046d:08da
[   18.325316] snd_cmipci 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[   18.862154] input: zc3xx as /devices/pci0000:00/0000:00:11.2/usb2/2-1/input/input6
[   18.863479] usbcore: registered new interface driver zc3xx
[   18.931726] usbcore: registered new interface driver snd-usb-audio
[   19.691587] EXT3-fs (dm-0): using internal journal
[   20.828216] loop: module loaded
[   21.483975] kjournald starting.  Commit interval 5 seconds
[   21.484157] EXT3-fs (sda9): using internal journal
[   21.484165] EXT3-fs (sda9): mounted filesystem with ordered data mode
[   21.554667] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   21.646184] kjournald starting.  Commit interval 5 seconds
[   21.652182] EXT3-fs (dm-1): using internal journal
[   21.652189] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[   22.582655] fuse init (API version 7.17)
[   25.488662] 8139too 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.152040] eth0: no IPv6 routers present
[   39.660602] start_kdeinit (1410): /proc/1412/oom_adj is deprecated, please use /proc/1412/oom_score_adj instead.

** Model information
not available

** Loaded modules:
fuse
nls_utf8
nls_cp437
vfat
fat
loop
snd_usb_audio
snd_usbmidi_lib
snd_cmipci
snd_pcm
snd_page_alloc
snd_opl3_lib
snd_hwdep
snd_mpu401_uart
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
i2c_viapro
via_ircc
snd_seq
gspca_zc3xx
gspca_main
videodev
snd_timer
snd_seq_device
pcspkr
evdev
psmouse
media
parport_pc
parport
tpm_tis
tpm
tpm_bios
shpchp
ns558
gameport
snd
serio_raw
lm63
processor
soundcore
irda
crc_ccitt
ext3
jbd
mbcache
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
ohci_hcd
uhci_hcd
radeon
pata_via
libata
ttm
drm_kms_helper
drm
ehci_hcd
scsi_mod
usbcore
i2c_algo_bit
i2c_core
power_supply
8139too
8139cp
floppy
mii
thermal
fan
thermal_sys
usb_common
button

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
    link/ether 00:c1:26:0a:fa:ec brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.33/24 brd 192.168.1.255 scope global eth0
    inet6 fe80::2c1:26ff:fe0a:faec/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:   10780     190    0    0    0     0          0         0    10780     190    0    0    0     0       0          0
  eth0: 6111713    7013    0    0    0     0          0         0  1991595    6899    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    7117 total packets received
    4 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    7113 incoming packets delivered
    6642 requests sent out
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    376 active connections openings
    0 passive connection openings
    95 failed connection attempts
    36 connection resets received
    3 connections established
    6893 segments received
    6692 segments send out
    84 segments retransmited
    0 bad segments received.
    148 resets sent
Udp:
    284 packets received
    0 packets to unknown port received.
    0 packet receive errors
    284 packets sent
UdpLite:
TcpExt:
    10 TCP sockets finished time wait in fast timer
    257 delayed acks sent
    Quick ack mode was activated 3 times
    3869 packet headers predicted
    978 acknowledgments not containing data payload received
    197 predicted acknowledgments
    2 times recovered from packet loss by selective acknowledgements
    1 congestion windows recovered without slow start after partial ack
    101 TCP data loss events
    33 fast retransmits
    2 forward retransmits
    12 other TCP timeouts
    2 DSACKs sent for old packets
    1 DSACKs received
    11 connections reset due to unexpected data
    29 connections reset due to early user close
    6 connections aborted due to timeout
    TCPDSACKIgnoredNoUndo: 1
    TCPSackShifted: 78
    TCPSackMerged: 90
    TCPSackShiftFallback: 39
IpExt:
    InOctets: 6018819
    OutOctets: 1872663


** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-via

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e8000000-e9ffffff
	Prefetchable memory behind bridge: d8000000-e7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 5
	Region 0: Memory at ea001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Device [1838:1074]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 10
	Region 0: Memory at ea002000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:0b.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
	Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at d000 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: snd_cmipci

00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at ea003000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: 8139too

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
	Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 11
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at d800 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_via

00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
	Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at dc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
	Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at e000 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
	Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at e400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA controller])
	Subsystem: Hightech Information System Ltd. Device [17af:2016]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at c000 [size=256]
	Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) [1002:4172]
	Subsystem: Hightech Information System Ltd. Device [17af:2017]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at e9010000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>


** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.4        Linux image base package
ii  module-init-tools             3.12-2+b1  tools for managing Linux kernel mo

Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii  firmware-linux-free           3          Binary firmware for various driver
ii  libc6-i686                    2.11.3-3   Embedded GNU C Library: Shared lib

Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii  grub-pc        1.98+20100804-14+squeeze1 GRand Unified Bootloader, version 
pn  linux-doc-3.2  <none>                    (no description available)

Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn  firmware-atheros            <none>       (no description available)
pn  firmware-bnx2               <none>       (no description available)
pn  firmware-bnx2x              <none>       (no description available)
pn  firmware-brcm80211          <none>       (no description available)
pn  firmware-intelwimax         <none>       (no description available)
pn  firmware-ipw2x00            <none>       (no description available)
pn  firmware-ivtv               <none>       (no description available)
pn  firmware-iwlwifi            <none>       (no description available)
pn  firmware-libertas           <none>       (no description available)
pn  firmware-linux              <none>       (no description available)
ii  firmware-linux-nonfree      0.35~bpo60+1 Binary firmware for various driver
pn  firmware-myricom            <none>       (no description available)
pn  firmware-netxen             <none>       (no description available)
pn  firmware-qlogic             <none>       (no description available)
pn  firmware-ralink             <none>       (no description available)
pn  firmware-realtek            <none>       (no description available)
pn  xen-hypervisor              <none>       (no description available)

-- debconf information:
  linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true
  linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false
  linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
  linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:



Reply to: