Bug#676547: linux-image-2.6.32-5-amd64: obviously wrong timestamps in dmesg
Package: linux-2.6
Version: 2.6.32-45
Severity: minor
*** Please type your report below this line ***
As you can see in the attached kernel log, the timestamps in it jump
randomly and are not related to the uptime. Other than this cosmetic
problem, the server seems to work.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 05:12:07 $
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=43751292-792c-4164-b354-0be733eec935 ro quiet
** Not tainted
** Full kernel log is attached
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R210
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.8.2
board_vendor: Dell Inc.
board_name: 05KX61
board_version: A04
** Loaded modules:
Module Size Used by
loop 11623 0
broadcom 6200 0
libphy 14038 1 broadcom
bnx2x 196364 0
crc32c 2560 1
libcrc32c 1026 1 bnx2x
mdio 3096 1 bnx2x
snd_pcm 60151 0
snd_timer 15502 1 snd_pcm
snd 45998 2 snd_pcm,snd_timer
soundcore 4566 1 snd
snd_page_alloc 6217 1 snd_pcm
evdev 7352 1
pcspkr 1699 0
dcdbas 5032 0
button 4650 0
power_meter 8302 0
processor 29871 4
ext3 106534 5
jbd 37077 1 ext3
mbcache 5050 1 ext3
sd_mod 29697 7
crc_t10dif 1276 1 sd_mod
ahci 32822 6
ehci_hcd 32081 0
libata 133264 1 ahci
bnx2 57273 0
scsi_mod 126261 2 sd_mod,libata
usbcore 122834 2 ehci_hcd
nls_base 6377 1 usbcore
thermal 11610 0
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI
[8086:d130] (rev 11)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
<512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol+
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express
Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Dell Device [1028:02a5]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00000 Data: 4099
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0
<512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 1s to 3.5s, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol+
UESvrt: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor
System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v0] Vendor Specific Information: ID=0000 Rev=0
Len=000 <?>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor
Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v0] Vendor Specific Information: ID=0000 Rev=0
Len=000 <?>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor
System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v0] Vendor Specific Information: ID=0000 Rev=0
Len=000 <?>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor
Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI
Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI
Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20
[EHCI])
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: da000000-ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 40a1
Capabilities: [90] Subsystem: Dell Device [1028:02a5]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20
[EHCI])
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device [1028:02a5]
00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC
Interface Controller [8086:3b14] (rev 05)
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series
Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at fcd0 [size=8]
Region 1: I/O ports at fcc8 [size=4]
Region 2: I/O ports at fcd8 [size=8]
Region 3: I/O ports at fccc [size=4]
Region 4: I/O ports at fce0 [size=32]
Region 5: Memory at df0fe000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 40b9
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II
BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme II Ethernet Controller
Read-only fields:
[PN] Part number: BCM95716C1
[EC] Engineering changes: 220197-3
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 30 32 38
[V0] Vendor specific: 6.0.1
[RV] Reserved: checksum good, 23 byte(s) reserved
End
Capabilities: [58] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=9 Masked-
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
<2us, L1 <2us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Device Serial Number d0-67-e5-ff-fe-e9-37-52
Capabilities: [110 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC+ UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: bnx2
02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II
BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme II Ethernet Controller
Read-only fields:
[PN] Part number: BCM95716C1
[EC] Engineering changes: 220197-3
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 30 32 38
[V0] Vendor specific: 6.0.1
[RV] Reserved: checksum good, 23 byte(s) reserved
End
Capabilities: [58] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=9 Masked-
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
<2us, L1 <2us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Device Serial Number d0-67-e5-ff-fe-e9-37-53
Capabilities: [110 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC+ UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: bnx2
03:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA
G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 002 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching
Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching
Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an
initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.3-3 Embedded GNU C Library:
Shared lib
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
ii firmware-bnx2 0.28+squeeze1 Binary firmware for
Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 05:12:07 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=43751292-792c-4164-b354-0be733eec935 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf699000 (usable)
[ 0.000000] BIOS-e820: 00000000bf699000 - 00000000bf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6ce000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-CFFFF write-back
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf699 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf699000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf699000 page 4k
[ 0.000000] kernel direct mapping tables up to bf699000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] RAMDISK: 7f76d000 - 7fff4e57
[ 0.000000] ACPI: RSDP 00000000000f1240 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1340 00094 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000bf6af000 039A4 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bf6c6000 00040
[ 0.000000] ACPI: APIC 00000000bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000bf6b2b24 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000bf6b2d94 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000bf6b29a4 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000bf6b29d4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6c7000 011C4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000003bfff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d55c4] TEXT DATA BSS ==> [0001000000 - 00016d55c4]
[ 0.000000] #3 [007f76d000 - 007fff4e57] RAMDISK ==> [007f76d000 - 007fff4e57]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [00016d6000 - 00016d6329] BRK ==> [00016d6000 - 00016d6329]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bf699
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046069
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765649 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 28 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf699000 - 00000000bf6af000
[ 0.000000] PM: Registered nosave memory: 00000000bf6af000 - 00000000bf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000bf6ce000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028044
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=43751292-792c-4164-b354-0be733eec935 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800055fe000 - ffff8800095fe000
[ 0.000000] software IO TLB at phys 0x55fe000 - 0x95fe000
[ 0.000000] Memory: 4040968k/5242880k available (3068k kernel code, 1058604k absent, 143308k reserved, 2047k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:664
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 2394.405 MHz processor.
[18014398.509487] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.81 BogoMIPS (lpj=9577620)
[18014398.509501] Security Framework initialized
[18014398.509504] SELinux: Disabled at boot.
[18014398.509753] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[18014398.675826] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[18014398.676167] Mount-cache hash table entries: 256
[18014398.676290] Initializing cgroup subsys ns
[18014398.676293] Initializing cgroup subsys cpuacct
[18014398.676299] Initializing cgroup subsys devices
[18014398.676301] Initializing cgroup subsys freezer
[18014398.676303] Initializing cgroup subsys net_cls
[18014398.676319] CPU: Physical Processor ID: 0
[18014398.676320] CPU: Processor Core ID: 0
[18014398.676323] CPU: L1 I cache: 32K, L1 D cache: 32K
[18014398.676325] CPU: L2 cache: 256K
[18014398.676326] CPU: L3 cache: 8192K
[18014398.676328] CPU 0/0x0 -> Node 0
[18014398.676331] mce: CPU supports 9 MCE banks
[18014398.676338] CPU0: Thermal LVT vector (0xfa) already installed
[18014398.676341] CPU 0 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[18014398.676347] using mwait in idle threads.
[18014398.676349] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[18014398.676352] ... version: 3
[18014398.676354] ... bit width: 48
[18014398.676355] ... generic registers: 4
[18014398.676356] ... value mask: 0000ffffffffffff
[18014398.676358] ... max period: 000000007fffffff
[18014398.676359] ... fixed-purpose events: 3
[18014398.676360] ... event mask: 000000070000000f
[18014398.677114] ACPI: Core revision 20090903
[18014398.679943] DMAR: Host address width 36
[18014398.679946] DMAR: DRHD base: 0x000000fed50000 flags: 0x1
[18014398.679952] IOMMU fed50000: ver 1:0 cap c90780106b0462 ecap f020e2
[18014398.679955] DMAR: RMRR base: 0x000000bf7c8000 end: 0x000000bf7dffff
[18014398.679957] DMAR: RMRR base: 0x000000bf7c0000 end: 0x000000bf7c0fff
[18014398.679959] DMAR: RMRR base: 0x000000bf7c2000 end: 0x000000bf7c2fff
[18014398.679961] DMAR: No ATSR found
[18014398.679969] Setting APIC routing to physical flat
[18014398.680298] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[18014398.719920] CPU0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz stepping 05
[18014398.825611] Booting processor 1 APIC 0x2 ip 0x6000
[36028797.345414] Initializing CPU#1
[36028797.422851] CPU: Physical Processor ID: 0
[36028797.422852] CPU: Processor Core ID: 1
[36028797.422855] CPU: L1 I cache: 32K, L1 D cache: 32K
[36028797.422856] CPU: L2 cache: 256K
[36028797.422857] CPU: L3 cache: 8192K
[36028797.422859] CPU 1/0x2 -> Node 0
[36028797.422868] CPU1: Thermal LVT vector (0xfa) already installed
[36028797.422871] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[18014398.913410] CPU1: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz stepping 05
[18014398.913417] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[18014399.279008] Booting processor 2 APIC 0x4 ip 0x6000
[36028797.798756] Initializing CPU#2
[36028797.878039] CPU: Physical Processor ID: 0
[36028797.878041] CPU: Processor Core ID: 2
[36028797.878043] CPU: L1 I cache: 32K, L1 D cache: 32K
[36028797.878044] CPU: L2 cache: 256K
[36028797.878045] CPU: L3 cache: 8192K
[36028797.878048] CPU 2/0x4 -> Node 0
[36028797.878056] CPU2: Thermal LVT vector (0xfa) already installed
[36028797.878059] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[18014399.368597] CPU2: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz stepping 05
[18014399.368604] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[18014399.388646] Booting processor 3 APIC 0x6 ip 0x6000
[36028797.908394] Initializing CPU#3
[36028797.985847] CPU: Physical Processor ID: 0
[36028797.985848] CPU: Processor Core ID: 3
[36028797.985851] CPU: L1 I cache: 32K, L1 D cache: 32K
[36028797.985852] CPU: L2 cache: 256K
[36028797.985853] CPU: L3 cache: 8192K
[36028797.985855] CPU 3/0x6 -> Node 0
[36028797.985864] CPU3: Thermal LVT vector (0xfa) already installed
[36028797.985866] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[18014399.476405] CPU3: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz stepping 05
[18014399.476412] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[18014399.496400] Brought up 4 CPUs
[18014399.496402] Total of 4 processors activated (19152.06 BogoMIPS).
[18014399.828544] CPU0 attaching sched-domain:
[18014399.828547] domain 0: span 0-3 level MC
[18014399.828549] groups: group ffff88000520fbf0 cpus 0 group ffff88000522fbf0 cpus 1 group ffff88000524fbf0 cpus 2 group ffff88000526fbf0 cpus 3
[18014399.828557] CPU1 attaching sched-domain:
[18014399.828558] domain 0: span 0-3 level MC
[18014399.828560] groups: group ffff88000522fbf0 cpus 1 group ffff88000524fbf0 cpus 2 group ffff88000526fbf0 cpus 3 group ffff88000520fbf0 cpus 0
[18014399.828566] CPU2 attaching sched-domain:
[18014399.828568] domain 0: span 0-3 level MC
[18014399.828570] groups: group ffff88000524fbf0 cpus 2 group ffff88000526fbf0 cpus 3 group ffff88000520fbf0 cpus 0 group ffff88000522fbf0 cpus 1
[18014399.828576] CPU3 attaching sched-domain:
[18014399.828577] domain 0: span 0-3 level MC
[18014399.828579] groups: group ffff88000526fbf0 cpus 3 group ffff88000520fbf0 cpus 0 group ffff88000522fbf0 cpus 1 group ffff88000524fbf0 cpus 2
[18014399.828806] devtmpfs: initialized
[18014399.832465] regulator: core version 0.5
[18014399.832513] NET: Registered protocol family 16
[18014399.832583] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[18014399.832585] ACPI: bus type pci registered
[18014399.832647] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[18014399.832649] PCI: MCFG area at e0000000 reserved in E820
[18014399.837685] PCI: Using MMCONFIG at e0000000 - efffffff
[18014399.837686] PCI: Using configuration type 1 for base access
[18014399.838027] bio: create slab <bio-0> at 0
[18014399.838398] ACPI: EC: Look up EC in DSDT
[18014399.840138] ACPI: BIOS _OSI(Linux) query ignored
[18014399.840239] ACPI: Interpreter enabled
[18014399.840241] ACPI: (supports S0 S4 S5)
[18014399.840253] ACPI: Using IOAPIC for interrupt routing
[18014399.843572] ACPI: No dock devices found.
[18014399.843914] ACPI: PCI Root Bridge [PCI0] (0000:00)
[18014399.843984] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[18014399.843987] pci 0000:00:00.0: PME# disabled
[18014399.844050] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[18014399.844053] pci 0000:00:03.0: PME# disabled
[18014399.844319] pci 0000:00:1a.0: reg 10 32bit mmio: [0xdf0fa000-0xdf0fa3ff]
[18014399.844385] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[18014399.844389] pci 0000:00:1a.0: PME# disabled
[18014399.844457] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[18014399.844461] pci 0000:00:1c.0: PME# disabled
[18014399.844513] pci 0000:00:1d.0: reg 10 32bit mmio: [0xdf0fc000-0xdf0fc3ff]
[18014399.844578] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[18014399.844582] pci 0000:00:1d.0: PME# disabled
[18014399.844764] pci 0000:00:1f.2: reg 10 io port: [0xfcd0-0xfcd7]
[18014399.844769] pci 0000:00:1f.2: reg 14 io port: [0xfcc8-0xfccb]
[18014399.844774] pci 0000:00:1f.2: reg 18 io port: [0xfcd8-0xfcdf]
[18014399.844779] pci 0000:00:1f.2: reg 1c io port: [0xfccc-0xfccf]
[18014399.844784] pci 0000:00:1f.2: reg 20 io port: [0xfce0-0xfcff]
[18014399.844789] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdf0fe000-0xdf0fe7ff]
[18014399.844829] pci 0000:00:1f.2: PME# supported from D3hot
[18014399.844832] pci 0000:00:1f.2: PME# disabled
[18014399.844924] pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[18014399.845014] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[18014399.845019] pci 0000:02:00.0: PME# disabled
[18014399.845084] pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[18014399.845174] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[18014399.845178] pci 0000:02:00.1: PME# disabled
[18014399.845257] pci 0000:00:1c.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[18014399.845295] pci 0000:03:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[18014399.845302] pci 0000:03:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[18014399.845308] pci 0000:03:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[18014399.845326] pci 0000:03:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[18014399.845391] pci 0000:00:1e.0: transparent bridge
[18014399.845396] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[18014399.845402] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[18014399.845415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[18014399.845776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD0._PRT]
[18014399.845867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[18014399.845959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[18014399.847931] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848024] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848115] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848206] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848297] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848387] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848477] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848567] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[18014399.848650] vgaarb: device added: PCI:0000:03:03.0,decodes=io+mem,owns=io+mem,locks=none
[18014399.848652] vgaarb: loaded
[18014399.848692] PCI: Using ACPI for IRQ routing
[18014399.848805] alloc irq_desc for 24 on node -1
[18014399.848807] alloc kstat_irqs on node -1
[18014399.848812] alloc irq_desc for 25 on node -1
[18014399.848813] alloc kstat_irqs on node -1
[18014399.848819] alloc irq_desc for 26 on node -1
[18014399.848820] alloc kstat_irqs on node -1
[18014399.848823] alloc irq_desc for 27 on node -1
[18014399.848825] alloc kstat_irqs on node -1
[18014399.848828] alloc irq_desc for 28 on node -1
[18014399.848829] alloc kstat_irqs on node -1
[18014399.848831] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[18014399.848838] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[18014399.848843] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[18014399.851716] hpet: hpet2 irq 24 for MSI
[36028798.361270] hpet: hpet3 irq 25 for MSI
[36028798.365273] hpet: hpet4 irq 26 for MSI
[36028798.369270] hpet: hpet5 irq 27 for MSI
[18014399.859807] Switching to clocksource tsc
[18014399.860799] pnp: PnP ACPI init
[18014399.860806] ACPI: bus type pnp registered
[18014399.863361] pnp: PnP ACPI: found 13 devices
[18014399.863362] ACPI: ACPI bus type pnp unregistered
[18014399.863372] system 00:07: ioport range 0x800-0x87f has been reserved
[18014399.863375] system 00:07: ioport range 0x880-0x8ff has been reserved
[18014399.863377] system 00:07: ioport range 0x900-0x91f has been reserved
[18014399.863379] system 00:07: ioport range 0x920-0x923 has been reserved
[18014399.863381] system 00:07: ioport range 0x924-0x924 has been reserved
[18014399.863383] system 00:07: ioport range 0xca0-0xca7 has been reserved
[18014399.863386] system 00:07: ioport range 0xca9-0xcab has been reserved
[18014399.863388] system 00:07: ioport range 0xcad-0xcaf has been reserved
[18014399.863392] system 00:08: ioport range 0xca8-0xca8 has been reserved
[18014399.863394] system 00:08: ioport range 0xcac-0xcac has been reserved
[18014399.863400] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[18014399.863404] system 00:0c: iomem range 0xfed50000-0xfed53fff has been reserved
[18014399.868051] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[18014399.868053] pci 0000:00:03.0: IO window: disabled
[18014399.868056] pci 0000:00:03.0: MEM window: disabled
[18014399.868059] pci 0000:00:03.0: PREFETCH window: disabled
[18014399.868063] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[18014399.868065] pci 0000:00:1c.0: IO window: disabled
[18014399.868069] pci 0000:00:1c.0: MEM window: 0xda000000-0xddffffff
[18014399.868072] pci 0000:00:1c.0: PREFETCH window: disabled
[18014399.868078] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[18014399.868080] pci 0000:00:1e.0: IO window: disabled
[18014399.868084] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[18014399.868088] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[18014399.868098] alloc irq_desc for 16 on node -1
[18014399.868099] alloc kstat_irqs on node -1
[18014399.868103] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[18014399.868107] pci 0000:00:03.0: setting latency timer to 64
[18014399.868114] pci 0000:00:1c.0: setting latency timer to 64
[18014399.868119] pci 0000:00:1e.0: setting latency timer to 64
[18014399.868123] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[18014399.868125] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[18014399.868127] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
[18014399.868129] pci_bus 0000:03: resource 1 mem: [0xde000000-0xdeffffff]
[18014399.868131] pci_bus 0000:03: resource 2 pref mem [0xd9800000-0xd9ffffff]
[18014399.868133] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[18014399.868135] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[18014399.868154] NET: Registered protocol family 2
[18014399.868285] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[18014399.869036] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[18014399.871602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[18014399.871925] TCP: Hash tables configured (established 524288 bind 65536)
[18014399.871927] TCP reno registered
[18014399.872079] NET: Registered protocol family 1
[18014399.872109] alloc irq_desc for 22 on node -1
[18014399.872110] alloc kstat_irqs on node -1
[18014399.872116] pci 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18014399.872138] pci 0000:00:1a.0: PCI INT A disabled
[18014399.872148] pci 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18014399.872168] pci 0000:00:1d.0: PCI INT A disabled
[18014399.872178] pci 0000:03:03.0: Boot video device
[18014399.872210] Unpacking initramfs...
[18014400.048819] Freeing initrd memory: 8735k freed
[18014400.050411] audit: initializing netlink socket (disabled)
[18014400.050420] type=2000 audit(1339093020.572:1): initialized
[18014400.054481] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[18014400.055499] VFS: Disk quotas dquot_6.5.2
[18014400.055539] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[18014400.055616] msgmni has been set to 7909
[36028798.565253] alg: No test for stdrng (krng)
[18014400.055806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[18014400.055809] io scheduler noop registered
[18014400.055810] io scheduler anticipatory registered
[18014400.055812] io scheduler deadline registered
[18014400.055853] io scheduler cfq registered (default)
[18014400.055935] alloc irq_desc for 29 on node -1
[18014400.055937] alloc kstat_irqs on node -1
[18014400.055944] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[18014400.055950] pcieport 0000:00:03.0: setting latency timer to 64
[18014400.056033] alloc irq_desc for 30 on node -1
[18014400.056034] alloc kstat_irqs on node -1
[18014400.056040] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[18014400.056046] pcieport 0000:00:1c.0: setting latency timer to 64
[18014400.056313] aer 0000:00:03.0:pcie02: service driver aer loaded
[18014400.057278] Linux agpgart interface v0.103
[18014400.057304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[18014400.057393] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[18014400.057487] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[18014400.057684] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[18014400.057796] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[18014400.057918] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[18014400.057960] PNP: No PS/2 controller found. Probing ports directly.
[18014400.058815] i8042.c: No controller found.
[18014400.058907] mice: PS/2 mouse device common for all mice
[18014400.058931] rtc_cmos 00:04: RTC can wake from S4
[18014400.058955] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[18014400.058980] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[18014400.058991] cpuidle: using governor ladder
[18014400.058992] cpuidle: using governor menu
[18014400.058995] No iBFT detected.
[18014400.059254] TCP cubic registered
[18014400.059335] NET: Registered protocol family 10
[18014400.060018] Mobile IPv6
[18014400.060020] NET: Registered protocol family 17
[18014400.060071] PM: Resume from disk failed.
[18014400.060077] registered taskstats version 1
[18014400.060447] rtc_cmos 00:04: setting system clock to 2012-06-07 18:17:01 UTC (1339093021)
[18014400.060477] Initalizing network drop monitor service
[18014400.060497] Freeing unused kernel memory: 592k freed
[18014400.060586] Write protecting the kernel read-only data: 4224k
[36028798.580656] udev[76]: starting version 164
[36028798.613481] usbcore: registered new interface driver usbfs
[36028798.613498] usbcore: registered new interface driver hub
[36028798.613584] usbcore: registered new device driver usb
[18014400.107136] SCSI subsystem initialized
[36028798.618153] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[36028798.618173] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36028798.618180] bnx2 0000:02:00.0: setting latency timer to 64
[36028798.618334] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[36028798.620156] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[36028798.622387] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr d0:67:e5:e9:37:52
[36028798.622403] alloc irq_desc for 17 on node -1
[36028798.622405] alloc kstat_irqs on node -1
[36028798.622411] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[36028798.622417] bnx2 0000:02:00.1: setting latency timer to 64
[36028798.622556] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[36028798.624330] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[36028798.626564] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr d0:67:e5:e9:37:53
[18014400.118950] libata version 3.00 loaded.
[36028798.629746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[36028798.629760] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[36028798.629779] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[36028798.629782] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[36028798.629798] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[36028798.629829] ehci_hcd 0000:00:1a.0: debug port 2
[36028798.633740] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[36028798.633807] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fa000
[36028798.644983] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[36028798.645008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[36028798.645010] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36028798.645012] usb usb1: Product: EHCI Host Controller
[36028798.645014] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[36028798.645015] usb usb1: SerialNumber: 0000:00:1a.0
[36028798.645069] usb usb1: configuration #1 chosen from 1 choice
[36028798.645090] hub 1-0:1.0: USB hub found
[36028798.645095] hub 1-0:1.0: 2 ports detected
[18014400.135648] ahci 0000:00:1f.2: version 3.0
[18014400.135657] alloc irq_desc for 20 on node -1
[18014400.135658] alloc kstat_irqs on node -1
[18014400.135663] ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[18014400.135693] alloc irq_desc for 31 on node -1
[18014400.135695] alloc kstat_irqs on node -1
[18014400.135702] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[18014400.151460] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[18014400.151467] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems sxs apst
[18014400.151473] ahci 0000:00:1f.2: setting latency timer to 64
[18014400.191421] scsi0 : ahci
[18014400.191494] scsi1 : ahci
[18014400.191534] scsi2 : ahci
[18014400.191575] scsi3 : ahci
[18014400.191615] scsi4 : ahci
[18014400.191657] scsi5 : ahci
[18014400.191686] ata1: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe100 irq 31
[18014400.191688] ata2: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe180 irq 31
[18014400.191691] ata3: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe200 irq 31
[18014400.191693] ata4: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe280 irq 31
[18014400.191696] ata5: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe300 irq 31
[18014400.191699] ata6: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe380 irq 31
[36028798.701200] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[36028798.701212] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[36028798.701215] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[36028798.701221] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[36028798.701245] ehci_hcd 0000:00:1d.0: debug port 2
[36028798.705137] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[36028798.705142] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fc000
[36028798.720821] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[36028798.720843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[36028798.720847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36028798.720851] usb usb2: Product: EHCI Host Controller
[36028798.720854] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[36028798.720857] usb usb2: SerialNumber: 0000:00:1d.0
[36028798.720915] usb usb2: configuration #1 chosen from 1 choice
[36028798.720935] hub 2-0:1.0: USB hub found
[36028798.720939] hub 2-0:1.0: 2 ports detected
[36028798.956460] usb 1-1: new high speed USB device using ehci_hcd and address 2
[36028799.020424] ata3: SATA link down (SStatus 0 SControl 300)
[36028799.024354] ata6: SATA link down (SStatus 0 SControl 300)
[18014400.518869] ata1: SATA link down (SStatus 0 SControl 300)
[36028799.028355] ata5: SATA link down (SStatus 0 SControl 300)
[18014400.579090] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[18014400.579095] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[18014400.579161] usb 1-1: configuration #1 chosen from 1 choice
[18014400.579223] hub 1-1:1.0: USB hub found
[18014400.579333] hub 1-1:1.0: 6 ports detected
[36028799.184108] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18014400.675584] ata2.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B05, max UDMA/133
[18014400.675589] ata2.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[18014400.676693] ata2.00: configured for UDMA/133
[36028799.192092] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18014400.683531] ata4.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B05, max UDMA/133
[18014400.683535] ata4.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[18014400.684586] ata4.00: configured for UDMA/133
[18014400.690610] usb 2-1: new high speed USB device using ehci_hcd and address 2
[36028799.200202] scsi 1:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5
[18014400.698668] scsi 3:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5
[36028799.208238] CE: hpet5 increasing min_delta_ns to 15000 nsec
[36028799.208244] CE: hpet5 increasing min_delta_ns to 22500 nsec
[36028799.208247] hrtimer: interrupt took 4207 ns
[36028799.211929] sd 1:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[18014400.702459] sd 3:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[18014400.702494] sd 3:0:0:0: [sdb] Write Protect is off
[18014400.702496] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[36028799.211990] sd 1:0:0:0: [sda] Write Protect is off
[36028799.211993] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[18014400.702513] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[36028799.212029] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[18014400.702650] sdb:
[36028799.212220] sda: sda1 sda2 < sda5 sdb1
[36028799.225853] sd 3:0:0:0: [sdb] Attached SCSI disk
[18014400.718592] sda6 sda7 sda8 sda9 >
[36028799.246383] sd 1:0:0:0: [sda] Attached SCSI disk
[18014400.822791] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[18014400.822796] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[18014400.822869] usb 2-1: configuration #1 chosen from 1 choice
[18014400.822928] hub 2-1:1.0: USB hub found
[18014400.823033] hub 2-1:1.0: 8 ports detected
[18014401.094088] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
[18014401.111498] PM: Starting manual resume from disk
[18014401.111500] PM: Resume from partition 8:7
[18014401.111502] PM: Checking hibernation image.
[18014401.111628] PM: Error -22 checking image file
[18014401.111631] PM: Resume from disk failed.
[36028799.640983] kjournald starting. Commit interval 5 seconds
[18014401.131509] EXT3-fs: mounted filesystem with ordered data mode.
[18014401.186165] usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
[18014401.186171] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[18014401.186247] usb 2-1.5: configuration #1 chosen from 1 choice
[18014401.186448] hub 2-1.5:1.0: USB hub found
[18014401.186535] hub 2-1.5:1.0: 4 ports detected
[36028800.306283] udev[401]: starting version 164
[36028800.395845] udev[477]: renamed network interface eth0 to eth0-eth1
[36028800.395849] udev[495]: renamed network interface eth1 to eth2
[36028800.446261] udev[477]: renamed network interface eth0-eth1 to eth1
[18014401.972916] Monitor-Mwait will be used to enter C-1 state
[18014401.972933] Monitor-Mwait will be used to enter C-3 state
[18014401.972992] processor LNXCPU:00: registered as cooling_device0
[36028800.483166] processor LNXCPU:01: registered as cooling_device1
[36028800.484067] processor LNXCPU:02: registered as cooling_device2
[18014401.974984] processor LNXCPU:03: registered as cooling_device3
[36028800.484995] ACPI Error: No handler for Region [IPMI] (ffff88013fa42240) [IPMI] (20090903/evregion-319)
[36028800.484999] ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
[36028800.485006] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88013fc2bd20), AE_NOT_EXIST
[36028800.485022] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88013fc2bca0), AE_NOT_EXIST
[36028800.485043] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-772)
[36028800.485405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[36028800.485410] ACPI: Power Button [PWRF]
[18014401.976581] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[36028800.486337] input: PC Speaker as /devices/platform/pcspkr/input/input2
[18014402.488952] Error: Driver 'pcspkr' is already registered, aborting...
[18014402.916496] Adding 6065144k swap on /dev/sda7. Priority:-1 extents:1 across:6065144k
[18014403.769802] CE: hpet2 increasing min_delta_ns to 15000 nsec
[18014403.769811] CE: hpet2 increasing min_delta_ns to 22500 nsec
[36028802.606835] CE: hpet3 increasing min_delta_ns to 15000 nsec
[36028802.606842] CE: hpet3 increasing min_delta_ns to 22500 nsec
[18014407.387344] EXT3 FS on sda1, internal journal
[18014407.493194] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.1 (2009/08/12)
[18014407.518357] loop: module loaded
[36028808.341856] CE: hpet4 increasing min_delta_ns to 15000 nsec
[36028808.341863] CE: hpet4 increasing min_delta_ns to 22500 nsec
[36028893.045052] kjournald starting. Commit interval 5 seconds
[18014494.535932] EXT3 FS on sda9, internal journal
[18014494.535939] EXT3-fs: mounted filesystem with ordered data mode.
[36028893.066662] kjournald starting. Commit interval 5 seconds
[18014494.557954] EXT3 FS on sda8, internal journal
[18014494.557961] EXT3-fs: mounted filesystem with ordered data mode.
[36028893.095857] kjournald starting. Commit interval 5 seconds
[18014494.586794] EXT3 FS on sda5, internal journal
[18014494.586800] EXT3-fs: mounted filesystem with ordered data mode.
[36028893.120813] kjournald starting. Commit interval 5 seconds
[18014494.611555] EXT3 FS on sda6, internal journal
[18014494.611561] EXT3-fs: mounted filesystem with ordered data mode.
[18014495.031184] alloc irq_desc for 32 on node -1
[18014495.031187] alloc kstat_irqs on node -1
[18014495.031192] bnx2 0000:02:00.0: irq 32 for MSI/MSI-X
[18014495.031194] alloc irq_desc for 33 on node -1
[18014495.031196] alloc kstat_irqs on node -1
[18014495.031198] bnx2 0000:02:00.0: irq 33 for MSI/MSI-X
[18014495.031200] alloc irq_desc for 34 on node -1
[18014495.031201] alloc kstat_irqs on node -1
[18014495.031204] bnx2 0000:02:00.0: irq 34 for MSI/MSI-X
[18014495.031205] alloc irq_desc for 35 on node -1
[18014495.031207] alloc kstat_irqs on node -1
[18014495.031209] bnx2 0000:02:00.0: irq 35 for MSI/MSI-X
[18014495.031211] alloc irq_desc for 36 on node -1
[18014495.031212] alloc kstat_irqs on node -1
[18014495.031215] bnx2 0000:02:00.0: irq 36 for MSI/MSI-X
[18014495.031216] alloc irq_desc for 37 on node -1
[18014495.031218] alloc kstat_irqs on node -1
[18014495.031220] bnx2 0000:02:00.0: irq 37 for MSI/MSI-X
[18014495.031222] alloc irq_desc for 38 on node -1
[18014495.031223] alloc kstat_irqs on node -1
[18014495.031226] bnx2 0000:02:00.0: irq 38 for MSI/MSI-X
[18014495.031228] alloc irq_desc for 39 on node -1
[18014495.031229] alloc kstat_irqs on node -1
[18014495.031232] bnx2 0000:02:00.0: irq 39 for MSI/MSI-X
[18014495.031233] alloc irq_desc for 40 on node -1
[18014495.031234] alloc kstat_irqs on node -1
[18014495.031237] bnx2 0000:02:00.0: irq 40 for MSI/MSI-X
[18014495.081227] bnx2: eth1: using MSIX
[18014495.081770] ADDRCONF(NETDEV_UP): eth1: link is not ready
[18014496.701850] bnx2: eth1 NIC Copper Link is Up, 100 Mbps full duplex
[18014496.702284] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[18014506.941541] eth1: no IPv6 routers present
[18014516.538950] alloc irq_desc for 41 on node -1
[18014516.538952] alloc kstat_irqs on node -1
[18014516.538958] bnx2 0000:02:00.1: irq 41 for MSI/MSI-X
[18014516.538959] alloc irq_desc for 42 on node -1
[18014516.538961] alloc kstat_irqs on node -1
[18014516.538964] bnx2 0000:02:00.1: irq 42 for MSI/MSI-X
[18014516.538965] alloc irq_desc for 43 on node -1
[18014516.538966] alloc kstat_irqs on node -1
[18014516.538969] bnx2 0000:02:00.1: irq 43 for MSI/MSI-X
[18014516.538971] alloc irq_desc for 44 on node -1
[18014516.538972] alloc kstat_irqs on node -1
[18014516.538975] bnx2 0000:02:00.1: irq 44 for MSI/MSI-X
[18014516.538976] alloc irq_desc for 45 on node -1
[18014516.538978] alloc kstat_irqs on node -1
[18014516.538980] bnx2 0000:02:00.1: irq 45 for MSI/MSI-X
[18014516.538982] alloc irq_desc for 46 on node -1
[18014516.538983] alloc kstat_irqs on node -1
[18014516.538986] bnx2 0000:02:00.1: irq 46 for MSI/MSI-X
[18014516.538987] alloc irq_desc for 47 on node -1
[18014516.538989] alloc kstat_irqs on node -1
[18014516.538991] bnx2 0000:02:00.1: irq 47 for MSI/MSI-X
[18014516.538993] alloc irq_desc for 48 on node -1
[18014516.538994] alloc kstat_irqs on node -1
[18014516.538997] bnx2 0000:02:00.1: irq 48 for MSI/MSI-X
[18014516.538999] alloc irq_desc for 49 on node -1
[18014516.539000] alloc kstat_irqs on node -1
[18014516.539003] bnx2 0000:02:00.1: irq 49 for MSI/MSI-X
[18014516.591927] bnx2: eth2: using MSIX
[18014516.592453] ADDRCONF(NETDEV_UP): eth2: link is not ready
[18014518.226355] bnx2: eth2 NIC Copper Link is Up, 100 Mbps full duplex
[18014518.226785] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[18014528.507989] eth2: no IPv6 routers present
Reply to: