Your message dated Mon, 04 Jun 2012 06:21:50 +0100 with message-id <1338787310.3979.185.camel@deadeye> and subject line Re: Bug#675902: linux-image-2.6.32-5-powerpc64: used aptitude to perform kernel upgrade and got these errors, but kernel seems to be installed. has caused the Debian Bug report #675902, regarding linux-image-2.6.32-5-powerpc64: used aptitude to perform kernel upgrade and got these errors, but kernel seems to be installed. to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 675902: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675902 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-powerpc64: used aptitude to perform kernel upgrade and got these errors, but kernel seems to be installed.
- From: Samuel Gasster <sgasster@gasster.com>
- Date: Sun, 03 Jun 2012 21:32:33 -0700
- Message-id: <[🔎] 20120604043233.1041.58134.reportbug@calcium.gasster.com>
Package: linux-2.6 Version: 2.6.32-41 Severity: important root@calcium:/var/log# aptitude -u Preconfiguring packages ... (Reading database ... 27177 files and directories currently installed.) Preparing to replace linux-image-2.6.32-5-powerpc64 2.6.32-41 (using .../linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb) ... Unpacking replacement linux-image-2.6.32-5-powerpc64 ... dpkg: error processing /var/cache/apt/archives/linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinux-2.6.32-5-powerpc64': No space left on device configured to not write apport reports dpkg-deb: subprocess paste killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.32-5-powerpc64 /boot/vmlinux-2.6.32-5-powerpc64 Errors were encountered while processing: /var/cache/apt/archives/linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Press return to continue. *** root@calcium:/boot# uname -a Linux calcium 2.6.32-5-powerpc64 #1 SMP Mon Jan 16 20:11:51 UTC 2012 ppc64 GNU/Linux ****** -- Package-specific info: ** Version: Linux version 2.6.32-5-powerpc64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 20:11:51 UTC 2012 ** Command line: root=UUID=40fb12a6-6b51-4cbd-80dd-9f3716dbd4cf ro ** Not tainted ** Kernel log: [ 5.069180] scsi 1:0:0:0: Direct-Access ATA ST31000340AS SD01 PQ: 0 ANSI: 5 [ 5.111673] usb 5-2: new full speed USB device using ohci_hcd and address 2 [ 5.330723] usb 5-2: New USB device found, idVendor=05ac, idProduct=1003 [ 5.339658] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.348567] usb 5-2: Product: Hub in Apple Extended USB Keyboard [ 5.357423] usb 5-2: Manufacturer: Mitsumi Electric [ 5.366539] usb 5-2: configuration #1 chosen from 1 choice [ 5.376907] hub 5-2:1.0: USB hub found [ 5.387729] hub 5-2:1.0: 3 ports detected [ 5.401773] ata3: SATA link down (SStatus 4 SControl 300) [ 5.700735] usb 5-2.1: new low speed USB device using ohci_hcd and address 3 [ 5.742824] ata4: SATA link down (SStatus 4 SControl 300) [ 5.773694] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.774094] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 5.774241] sd 0:0:0:0: [sda] Write Protect is off [ 5.774245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.774281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.774559] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 [ 5.819546] sd 1:0:0:0: [sdb] Write Protect is off [ 5.821315] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.837930] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.837992] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.847718] sdb: [ 5.861750] usb 5-2.1: New USB device found, idVendor=05ac, idProduct=0307 [ 5.880391] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.889848] usb 5-2.1: Product: Apple Optical USB Mouse [ 5.889912] [mac] sdb1 sdb2 sdb3 sdb4 [ 5.908500] usb 5-2.1: Manufacturer: Logitech [ 5.909648] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.927338] usb 5-2.1: configuration #1 chosen from 1 choice [ 6.016804] usb 5-2.3: new full speed USB device using ohci_hcd and address 4 [ 6.139761] usb 5-2.3: New USB device found, idVendor=05ac, idProduct=020b [ 6.149344] usb 5-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 6.158929] usb 5-2.3: Product: Apple Extended USB Keyboard [ 6.168493] usb 5-2.3: Manufacturer: Mitsumi Electric [ 6.178897] usb 5-2.3: configuration #1 chosen from 1 choice [ 6.215944] usbcore: registered new interface driver hiddev [ 6.232258] input: Logitech Apple Optical USB Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.1/5-2.1:1.0/input/input2 [ 6.242801] generic-usb 0003:05AC:0307.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1/input0 [ 6.260334] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.0/input/input3 [ 6.271056] generic-usb 0003:05AC:020B.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3/input0 [ 6.304027] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.1/input/input4 [ 6.315719] generic-usb 0003:05AC:020B.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3/input1 [ 6.339195] usbcore: registered new interface driver usbhid [ 6.351221] usbhid: v2.6:USB HID core driver [ 6.427806] eth0: Link is up at 100 Mbps, full-duplex. [ 6.632910] PowerMac G5 Thermal control driver 1.3 [ 6.645203] Detected fan controls: [ 6.657106] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN [ 6.669071] 1: RPM fan, id 2, location: DRIVE BAY [ 6.680984] 2: PWM fan, id 2, location: SLOT,PCI FAN [ 6.692847] 3: RPM fan, id 3, location: CPU A INTAKE [ 6.704645] 4: RPM fan, id 4, location: CPU A EXHAUST [ 6.716445] 5: RPM fan, id 5, location: CPU B INTAKE [ 6.728098] 6: RPM fan, id 6, location: CPU B EXHAUST [ 6.790295] PM: Starting manual resume from disk [ 6.801893] PM: Resume from partition 8:6 [ 6.801895] PM: Checking hibernation image. [ 6.802286] PM: Error -22 checking image file [ 6.802289] PM: Resume from disk failed. [ 6.848518] kjournald starting. Commit interval 5 seconds [ 6.854794] EXT3-fs: mounted filesystem with ordered data mode. [ 7.847121] udev[246]: starting version 164 [ 8.053301] PowerMac i2c bus pmu 2 registered [ 8.069280] PowerMac i2c bus pmu 1 registered [ 8.082605] PowerMac i2c bus mac-io 0 registered [ 8.094845] PowerMac i2c bus u3 1 registered [ 8.108200] PowerMac i2c bus u3 0 registered [ 8.112437] FCU Initialized, RPM fan shift is 3 [ 8.350505] irq: irq 30 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 30 [ 8.350552] irq: irq 1 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 21 [ 8.350576] irq: irq 2 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 24 [ 8.379689] snd-aoa-fabric-layout: Using PMF GPIOs [ 8.386382] snd-aoa-codec-tas: found 'deq' node [ 8.387015] snd-aoa-fabric-layout: can use this codec [ 8.462274] irq: irq 61 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 61 [ 8.462355] irq: irq 60 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 60 [ 8.462386] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a [ 9.337140] Adding 5874012k swap on /dev/sda6. Priority:-1 extents:1 across:5874012k [ 9.848015] EXT3 FS on sda3, internal journal [ 9.999641] loop: module loaded [ 10.035139] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. [ 11.970384] kjournald starting. Commit interval 5 seconds [ 11.981631] EXT3 FS on sda8, internal journal [ 11.992275] EXT3-fs: mounted filesystem with ordered data mode. [ 12.124762] kjournald starting. Commit interval 5 seconds [ 12.135483] EXT3 FS on sda7, internal journal [ 12.145319] EXT3-fs: mounted filesystem with ordered data mode. [ 12.215952] kjournald starting. Commit interval 5 seconds [ 12.226206] EXT3 FS on sda4, internal journal [ 12.236054] EXT3-fs: mounted filesystem with ordered data mode. [ 12.295682] kjournald starting. Commit interval 5 seconds [ 12.305788] EXT3 FS on sda5, internal journal [ 12.315433] EXT3-fs: mounted filesystem with ordered data mode. [ 13.449195] eth0: Link is up at 100 Mbps, full-duplex. [ 13.450694] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 15.510390] lp: driver loaded but no devices found [ 24.386653] eth0: no IPv6 routers present [ 914.849790] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 914.907424] ISO 9660 Extensions: RRIP_1991A ** Model information revision : 2.2 (pvr 0039 0202) revision : 2.2 (pvr 0039 0202) platform : PowerMac model : PowerMac7,2 machine : PowerMac7,2 motherboard : PowerMac7,2 MacRISC4 Power Macintosh ** Loaded modules: Module Size Used by nls_utf8 1904 0 isofs 37384 0 parport_pc 40944 0 lp 12220 0 parport 43200 2 parport_pc,lp snd_powermac 72328 0 loop 19205 0 firewire_sbp2 18321 0 snd_aoa_codec_tas 14321 2 snd_aoa_fabric_layout 13109 0 snd_aoa 17690 2 snd_aoa_codec_tas,snd_aoa_fabric_layout snd_aoa_i2sbus 24367 1 snd_aoa_soundbus 5404 2 snd_aoa_fabric_layout,snd_aoa_i2sbus snd_pcm 96860 2 snd_powermac,snd_aoa_i2sbus snd_page_alloc 8589 1 snd_pcm snd_timer 26063 1 snd_pcm snd 83426 7 snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer soundcore 7939 1 snd evdev 13386 0 i2c_powermac 5654 0 ext3 159647 5 jbd 61099 1 ext3 mbcache 8262 1 ext3 therm_pm72 25896 0 usbhid 49265 0 hid 87022 1 usbhid sd_mod 41991 7 crc_t10dif 1409 1 sd_mod ata_generic 4786 0 ohci_hcd 60052 0 ehci_hcd 77012 0 firewire_ohci 38052 0 sata_svw 9431 6 libata 189879 2 ata_generic,sata_svw ide_cd_mod 33971 0 cdrom 40053 1 ide_cd_mod firewire_core 57290 2 firewire_sbp2,firewire_ohci crc_itu_t 1468 1 firewire_core sungem 56813 0 sungem_phy 14486 1 sungem scsi_mod 183933 3 firewire_sbp2,sd_mod,libata ide_pci_generic 3551 0 usbcore 184340 4 usbhid,ohci_hcd,ehci_hcd nls_base 8213 3 nls_utf8,isofs,usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.20 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 # dns-* options are implemented by the resolvconf package, if installed #dns-nameservers 208.67.222.222 208.67.220.220 dns-nameservers 192.168.2.3 66.75.164.89 66.75.64.90 8.8.8.8 dns-search gasster.com ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0a:95:d2:9c:38 brd ff:ff:ff:ff:ff:ff inet 192.168.1.20/24 brd 192.168.1.255 scope global eth0 inet6 fe80::20a:95ff:fed2:9c38/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 255951 1618 0 0 0 0 0 0 74895 519 0 0 0 0 0 0 *** Protocol statistics: Ip: 1331 total packets received 0 forwarded 0 incoming packets discarded 1331 incoming packets delivered 501 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 3 active connections openings 2 passive connection openings 0 failed connection attempts 0 connection resets received 2 connections established 832 segments received 491 segments send out 0 segments retransmited 0 bad segments received. 3 resets sent Udp: 108 packets received 0 packets to unknown port received. 0 packet receive errors 10 packets sent UdpLite: TcpExt: 1 TCP sockets finished time wait in fast timer 5 delayed acks sent 4 packets directly queued to recvmsg prequeue. 191 packet headers predicted 8 acknowledgments not containing data payload received 454 predicted acknowledgments IpExt: InBcastPkts: 489 InOctets: 218913 OutOctets: 66909 InBcastOctets: 131173 ** PCI devices: 0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3 AGP [106b:004b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 90020000 [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb 0001:00:00.0 Host bridge [0600]: Apple Computer Inc. CPC945 HT Bridge [106b:004a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: 80000000-800fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 Memory behind bridge: 80100000-801fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: 80200000-802fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Memory behind bridge: 80300000-805fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: 80600000-806fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0001:01:07.0 Unassigned class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 64 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:01:08.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0001:01:09.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 63 Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 63 Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 [1033:00e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 63 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 0001:03:0d.0 Unassigned class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 39 Region 0: Memory at 80204000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: ide-pmac 0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042] (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. Device [106b:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 0001:04:0f.0 Ethernet controller [0200]: Apple Computer Inc. K2 GMAC (Sun GEM) [106b:004c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at 80300000 [disabled] [size=1M] Kernel driver in use: gem 0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Broadcom K2 SATA [1166:0240] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Interrupt: pin ? routed to IRQ 16 Region 0: I/O ports at <unassigned> [disabled] Region 1: I/O ports at <unassigned> [disabled] Region 2: I/O ports at <unassigned> [disabled] Region 3: I/O ports at <unassigned> [disabled] Region 4: I/O ports at <unassigned> [disabled] Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: sata_svw ** USB devices: Bus 005 Device 004: ID 05ac:020b Apple, Inc. Pro Keyboard [Mitsumi, A1048/US layout] Bus 005 Device 003: ID 05ac:0307 Apple, Inc. Bus 005 Device 002: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048] Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: powerpc (ppc64) Kernel: Linux 2.6.32-5-powerpc64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-powerpc64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii libc6 2.11.3-3 Embedded GNU C Library: Shared lib ii linux-base 2.6.32-45 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-powerpc64 recommends: ii firmware-linux-free 2.6.32-45 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-powerpc64 suggests: pn linux-doc-2.6.32 <none> (no description available) pn mkvmlinuz <none> (no description available) Versions of packages linux-image-2.6.32-5-powerpc64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-powerpc64/prerm/removing-running-kernel-2.6.32-5-powerpc64: true linux-image-2.6.32-5-powerpc64/postinst/missing-firmware-2.6.32-5-powerpc64: linux-image-2.6.32-5-powerpc64/postinst/ignoring-do-bootloader-2.6.32-5-powerpc64: linux-image-2.6.32-5-powerpc64/postinst/depmod-error-initrd-2.6.32-5-powerpc64: false
--- End Message ---
--- Begin Message ---
- To: 675902-done@bugs.debian.org
- Subject: Re: Bug#675902: linux-image-2.6.32-5-powerpc64: used aptitude to perform kernel upgrade and got these errors, but kernel seems to be installed.
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 04 Jun 2012 06:21:50 +0100
- Message-id: <1338787310.3979.185.camel@deadeye>
- In-reply-to: <[🔎] 20120604043233.1041.58134.reportbug@calcium.gasster.com>
- References: <[🔎] 20120604043233.1041.58134.reportbug@calcium.gasster.com>
On Sun, 2012-06-03 at 21:32 -0700, Samuel Gasster wrote: > Package: linux-2.6 > Version: 2.6.32-41 > Severity: important > > root@calcium:/var/log# aptitude -u > Preconfiguring packages ... > (Reading database ... 27177 files and directories currently installed.) > Preparing to replace linux-image-2.6.32-5-powerpc64 2.6.32-41 (using .../linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb) ... > Unpacking replacement linux-image-2.6.32-5-powerpc64 ... > dpkg: error processing /var/cache/apt/archives/linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb (--unpack): > failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinux-2.6.32-5-powerpc64': No space left on device [...] This is the key error message: 'No space left on device' Ben. -- Ben Hutchings It is impossible to make anything foolproof because fools are so ingenious.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---