Bug#675093: linux-image-3.2.0-2-amd64: USB "timeout initializing reports" with Eaton UPS
Alright, got the log you requested.
[ 1.633336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.633359] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.633377] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.633381] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.633407] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.633435] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.634669] sky2 0000:06:00.0: eth0: addr 00:26:18:46:3a:05
[ 1.634694] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.634704] sky2 0000:04:00.0: setting latency timer to 64
[ 1.634732] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.634828] sky2 0000:04:00.0: irq 69 for MSI/MSI-X
[ 1.635926] sky2 0000:04:00.0: eth1: addr 00:26:18:46:3a:04
[ 1.637332] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.637797] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.638237] SCSI subsystem initialized
[ 1.643732] libata version 3.00 loaded.
[ 1.643746] firewire_ohci 0000:08:02.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
[ 1.645046] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.652474] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.652506] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.652509] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.652512] usb usb1: Product: EHCI Host Controller
[ 1.652515] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.652518] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.652734] hub 1-0:1.0: USB hub found
[ 1.652739] hub 1-0:1.0: 6 ports detected
[ 1.652841] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.653059] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.653063] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.653071] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.653094] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.653710] ahci 0000:05:00.0: version 3.0
[ 1.654234] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.654257] pata_marvell 0000:05:00.0: setting latency timer to 64
[ 1.654560] scsi0 : pata_marvell
[ 1.654695] scsi1 : pata_marvell
[ 1.654737] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma
0xc400 irq 16
[ 1.654739] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma
0xc408 irq 16
[ 1.656976] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.656988] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.672622] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.672645] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.672647] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.672649] usb usb2: Product: EHCI Host Controller
[ 1.672650] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.672652] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.672794] hub 2-0:1.0: USB hub found
[ 1.672799] hub 2-0:1.0: 6 ports detected
[ 1.672941] ata_piix 0000:00:1f.2: version 2.13
[ 1.672956] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low)
-> IRQ 20
[ 1.672960] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.672989] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.673255] scsi2 : ata_piix
[ 1.673379] scsi3 : ata_piix
[ 1.674515] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma
0x7480 irq 20
[ 1.674519] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma
0x7488 irq 20
[ 1.674600] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low)
-> IRQ 20
[ 1.674604] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.674630] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.674855] scsi4 : ata_piix
[ 1.674978] scsi5 : ata_piix
[ 1.675947] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma
0x8480 irq 20
[ 1.675950] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma
0x8488 irq 20
[ 1.676019] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.676026] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.676028] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.676036] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.676060] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.676116] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.676119] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.676120] usb usb3: Product: UHCI Host Controller
[ 1.676122] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.676123] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.676235] hub 3-0:1.0: USB hub found
[ 1.676239] hub 3-0:1.0: 2 ports detected
[ 1.676300] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 1.676306] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.676309] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.676314] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.676342] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.676366] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.676368] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.676370] usb usb4: Product: UHCI Host Controller
[ 1.676372] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.676373] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.676501] hub 4-0:1.0: USB hub found
[ 1.676506] hub 4-0:1.0: 2 ports detected
[ 1.676570] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low)
-> IRQ 19
[ 1.676576] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.676578] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.676583] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.676611] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.676634] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.676636] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.676638] usb usb5: Product: UHCI Host Controller
[ 1.676639] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.676641] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.676857] hub 5-0:1.0: USB hub found
[ 1.676864] hub 5-0:1.0: 2 ports detected
[ 1.676999] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.677005] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.677008] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.677014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.677038] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.677074] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.677076] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.677078] usb usb6: Product: UHCI Host Controller
[ 1.677079] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.677081] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.677187] hub 6-0:1.0: USB hub found
[ 1.677193] hub 6-0:1.0: 2 ports detected
[ 1.677263] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 1.677269] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.677271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.677276] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.677298] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.677322] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.677324] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.677326] usb usb7: Product: UHCI Host Controller
[ 1.677327] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.677329] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.677444] hub 7-0:1.0: USB hub found
[ 1.677449] hub 7-0:1.0: 2 ports detected
[ 1.677534] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.677540] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.677542] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.677548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.677569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.677594] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.677596] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.677597] usb usb8: Product: UHCI Host Controller
[ 1.677599] usb usb8: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.677600] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.677727] hub 8-0:1.0: USB hub found
[ 1.677733] hub 8-0:1.0: 2 ports detected
[ 1.708619] firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.816913] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.832866] ata1.00: configured for UDMA/33
[ 1.842802] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B
DL11 PQ: 0 ANSI: 5
[ 1.964443] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 2.007556] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.018186] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.096752] usb 1-5: New USB device found, idVendor=0409, idProduct=005a
[ 2.096757] usb 1-5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.097188] hub 1-5:1.0: USB hub found
[ 2.097373] hub 1-5:1.0: 4 ports detected
[ 2.208379] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.208457] firewire_core: created device fw0: GUID 001e8c0001f25c6b,
S400
[ 2.327103] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 2.327116] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.336268] Refined TSC clocksource calibration: 2672.727 MHz.
[ 2.336273] Switching to clocksource tsc
[ 2.340707] usb 2-1: New USB device found, idVendor=0424, idProduct=2504
[ 2.340711] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.341070] hub 2-1:1.0: USB hub found
[ 2.341233] hub 2-1:1.0: 4 ports detected
[ 2.452271] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[ 2.468315] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.468326] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 2.476535] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 2.476539] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.484534] ata4.00: configured for UDMA/133
[ 2.484805] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ
1AA0 PQ: 0 ANSI: 5
[ 2.494447] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.494451] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.494625] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.494844] sd 3:0:0:0: [sda] 1465149168 512-byte logical blocks:
(750 GB/698 GiB)
[ 2.494974] sd 3:0:0:0: [sda] Write Protect is off
[ 2.494977] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.495006] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.511289] sda: sda1 sda2 < sda5 >
[ 2.512090] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.592621] usb 2-2: New USB device found, idVendor=0424, idProduct=2504
[ 2.592625] usb 2-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.592970] hub 2-2:1.0: USB hub found
[ 2.593151] hub 2-2:1.0: 4 ports detected
[ 2.720359] usb 2-1.1: new high-speed USB device number 5 using ehci_hcd
[ 2.815795] usb 2-1.1: New USB device found, idVendor=17e9,
idProduct=0120
[ 2.815799] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.815802] usb 2-1.1: Product: LG Monitor L226WU
[ 2.815805] usb 2-1.1: Manufacturer: DisplayLink
[ 2.815807] usb 2-1.1: SerialNumber: 0120-00000NP87N101TJ
[ 2.904299] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd
[ 2.998513] usb 2-1.2: New USB device found, idVendor=090c,
idProduct=1000
[ 2.998517] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.998521] usb 2-1.2: Product: USB DISK
[ 2.998523] usb 2-1.2: Manufacturer: SMI Corporation
[ 2.998526] usb 2-1.2: SerialNumber: 6
[ 3.000664] usbcore: registered new interface driver uas
[ 3.001455] Initializing USB Mass Storage driver...
[ 3.001625] scsi6 : usb-storage 2-1.2:1.0
[ 3.001708] usbcore: registered new interface driver usb-storage
[ 3.001711] USB Mass Storage support registered.
[ 3.196170] usb 2-1.3: new full-speed USB device number 7 using ehci_hcd
[ 3.223818] device-mapper: uevent: version 1.0.3
[ 3.223865] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@redhat.com
[ 3.299636] usb 2-1.3: New USB device found, idVendor=1532,
idProduct=0007
[ 3.299639] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.299641] usb 2-1.3: Product: DeathAdder
[ 3.299642] usb 2-1.3: Manufacturer: Razer
[ 3.301938] hid: hid_debug is now used solely for parser and driver
debugging.
[ 3.301939] debugfs is now used for inspecting the device (report
descriptor, reports)
[ 3.302358]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
HID probe called for ifnum 0
[ 3.309228] input: Razer DeathAdder as
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input0
[ 3.309300] generic-usb 0003:1532:0007.0001: input,hidraw0: USB HID
v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.7-1.3/input0
[ 3.309311] usbcore: registered new interface driver usbhid
[ 3.309312] usbhid: USB HID core driver
[ 3.539808] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[ 3.547847] Btrfs loaded
[ 3.648425] PM: Starting manual resume from disk
[ 3.648427] PM: Hibernation image partition 254:1 present
[ 3.648429] PM: Looking for hibernation image.
[ 3.648643] PM: Image not found (code -22)
[ 3.648646] PM: Hibernation image not present or could not be loaded.
[ 3.688997] EXT4-fs (dm-0): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.728686] usb 7-2: New USB device found, idVendor=046a, idProduct=0011
[ 3.728691] usb 7-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.733735]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
HID probe called for ifnum 0
[ 3.770743]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Set_Report wValue=0x0200 wIndex=0x0000 wLength=1
[ 3.770805] input: HID 046a:0011 as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input1
[ 3.770881] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID
v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.1-2/input0
[ 3.859944] usb 2-2.1: new high-speed USB device number 8 using ehci_hcd
[ 3.959409] usb 2-2.1: New USB device found, idVendor=17e9,
idProduct=0120
[ 3.959414] usb 2-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.959417] usb 2-2.1: Product: LG Monitor L226WU
[ 3.959419] usb 2-2.1: Manufacturer: DisplayLink
[ 3.959422] usb 2-2.1: SerialNumber: 0120-00000NP87N101VZ
[ 4.001202] scsi 6:0:0:0: CD-ROM SMI USB DISK
1100 PQ: 0 ANSI: 2
[ 4.003417] sr1: scsi3-mmc drive: 0x/0x caddy
[ 4.003550] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.047787] usb 2-2.2: new high-speed USB device number 9 using ehci_hcd
[ 4.141844] usb 2-2.2: New USB device found, idVendor=090c,
idProduct=1000
[ 4.141849] usb 2-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.141852] usb 2-2.2: Product: USB DISK
[ 4.141855] usb 2-2.2: Manufacturer: SMI Corporation
[ 4.141857] usb 2-2.2: SerialNumber: 1
[ 4.142564] scsi7 : usb-storage 2-2.2:1.0
[ 4.339813] usb 2-2.4: new low-speed USB device number 10 using ehci_hcd
[ 4.771903] udevd[408]: starting version 175
[ 5.140972] scsi 7:0:0:0: CD-ROM SMI USB DISK
1100 PQ: 0 ANSI: 2
[ 5.144069] sr2: scsi3-mmc drive: 0x/0x caddy
[ 5.144239] sr 7:0:0:0: Attached scsi CD-ROM sr2
[ 5.193160] usb 2-2.4: New USB device found, idVendor=0463,
idProduct=ffff
[ 5.193162] usb 2-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 5.193164] usb 2-2.4: Product: Ellipse MAX
[ 5.193166] usb 2-2.4: Manufacturer: EATON
[ 5.193167] usb 2-2.4: SerialNumber: ADKM25014
[ 5.193660]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
HID probe called for ifnum 0
[ 5.371200] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.371206] ACPI: Power Button [PWRB]
[ 5.371252] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.371255] ACPI: Power Button [PWRF]
[ 5.518098] EDAC MC: Ver: 2.1.0
[ 5.526058] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core
#0': DEV 0000:ff:03.0
[ 5.526080] EDAC PCI0: Giving out device to module 'i7core_edac'
controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[ 5.526089] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.572045] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 5.572049] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts
with ACPI region SMRG [io 0x400-0x40f]
[ 5.572051] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 5.791294] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 5.937105] wmi: Mapper loaded
[ 5.949783] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.954502] iTCO_vendor_support: vendor-support=0
[ 5.967237] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 5.986441] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 5.986480] snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X
[ 5.986499] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.049691] nvidia: module license 'NVIDIA' taints kernel.
[ 6.049694] Disabling lock debugging due to kernel taint
[ 6.147032] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 6.147271] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) ->
IRQ 24
[ 6.147277] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.147280] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.147521] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.53
Fri May 11 23:28:10 PDT 2012
[ 6.150697] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.150762] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0860)
[ 6.150818] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.323114] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 6.417508] hda_codec: AD1989B: BIOS auto-probing.
[ 6.417569] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.491228] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 6.667028] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 6.842844] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 7.018911] usb 2-1.2: reset high-speed USB device number 6 using
ehci_hcd
[ 8.349879]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0119 wIndex=0x0000 wLength=3
[ 8.394305]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0103 wIndex=0x0000 wLength=3
[ 8.438789]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x011f wIndex=0x0000 wLength=2
[ 8.481275]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0101 wIndex=0x0000 wLength=6
[ 8.533386]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x010f wIndex=0x0000 wLength=2
[ 8.575868]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0102 wIndex=0x0000 wLength=6
[ 8.627101]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0106 wIndex=0x0000 wLength=6
[ 8.678835]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x0320 wIndex=0x0000 wLength=2
[ 8.721446]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x03ff wIndex=0x0000 wLength=24
[ 8.769056]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x03fe wIndex=0x0000 wLength=11
[ 18.342860]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
timeout waiting for ctrl or out queue to clear
[ 18.342955]
/usr/src/linux-2.6-3.2.18/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c:
submitting ctrl urb: Get_Report wValue=0x030d wIndex=0x0000 wLength=4
[ 18.342966] generic-usb 0003:0463:FFFF.0003: usb_submit_urb(ctrl) failed
[ 18.343017] Pid: 0, comm: swapper/0 Tainted: P O
3.2.0-2-amd64 #1
[ 18.343020] Call Trace:
[ 18.343022] <IRQ> [<ffffffffa00904c1>] ?
hid_submit_ctrl+0x21e/0x244 [usbhid]
[ 18.343040] [<ffffffff811bc3b7>] ? swiotlb_tbl_unmap_single+0x50/0xb7
[ 18.343046] [<ffffffffa0090b1a>] ? hid_ctrl+0xca/0x14f [usbhid]
[ 18.343058] [<ffffffffa000c4ea>] ? usb_hcd_giveback_urb+0x76/0xaa
[usbcore]
[ 18.343062] [<ffffffffa00d0d6c>] ? ehci_urb_done+0x6b/0x7b [ehci_hcd]
[ 18.343066] [<ffffffffa00d1086>] ? qh_completions+0x30a/0x39d [ehci_hcd]
[ 18.343070] [<ffffffffa00d15bd>] ? end_unlink_async+0x46/0xbd [ehci_hcd]
[ 18.343074] [<ffffffffa00d3267>] ? ehci_irq+0x90/0x1ee [ehci_hcd]
[ 18.343078] [<ffffffff81094fbe>] ? __rcu_process_callbacks+0x72/0x2c0
[ 18.343084] [<ffffffffa000bec8>] ? usb_hcd_irq+0x37/0x6a [usbcore]
[ 18.343086] [<ffffffff8109049d>] ? handle_irq_event_percpu+0x50/0x180
[ 18.343089] [<ffffffff8104becd>] ? __do_softirq+0x13e/0x177
[ 18.343092] [<ffffffff81023e34>] ? __setup_APIC_LVTT+0x4a/0x66
[ 18.343095] [<ffffffff81090601>] ? handle_irq_event+0x34/0x53
[ 18.343098] [<ffffffff8106b8a1>] ? arch_local_irq_save+0x11/0x17
[ 18.343100] [<ffffffff81092965>] ? handle_fasteoi_irq+0x7c/0xaf
[ 18.343103] [<ffffffff8100f8a5>] ? handle_irq+0x1d/0x21
[ 18.343106] [<ffffffff8100f5d5>] ? do_IRQ+0x42/0x98
[ 18.343109] [<ffffffff8134976e>] ? common_interrupt+0x6e/0x6e
[ 18.343110] <EOI> [<ffffffff811eba59>] ? intel_idle+0xea/0x119
[ 18.343114] [<ffffffff811eba38>] ? intel_idle+0xc9/0x119
[ 18.343118] [<ffffffff8126b97f>] ? cpuidle_idle_call+0xec/0x179
[ 18.343120] [<ffffffff8100d248>] ? cpu_idle+0xa5/0xf2
[ 18.343124] [<ffffffff816aab3d>] ? start_kernel+0x3bd/0x3c8
[ 18.343127] [<ffffffff816aa140>] ? early_idt_handlers+0x140/0x140
[ 18.343129] [<ffffffff816aa3c4>] ? x86_64_start_kernel+0x104/0x111
[ 18.343183] generic-usb 0003:0463:FFFF.0003: timeout initializing reports
[ 18.343565] generic-usb 0003:0463:FFFF.0003: hiddev0,hidraw2: USB HID
v1.10 Device [EATON Ellipse MAX] on usb-0000:00:1d.7-2.4/input0
--
Manu Benoît
Reply to: