--- Begin Message ---
Hi Jonathan,
sorry, it was my mistake. I didn't try any upstream version yet.
I don't know if it's a regression. I've been using wheezy on this laptop
starting from March. I read from my apt/history.log that the first
kernel version I used was 3.2.9-1, and the problem was there, never
disappearing on upgrades. Maybe it's a regression from older versions,
but I can't tell you.
I can try the upstream version (I suppose it's better if I build it "the
debian way" as indicated in the debian kernel handbook) and report here.
Thank you very much for your attention.
Nicola
Il 20/05/12 03:35, Jonathan Nieder ha scritto:
> Hi Nicola,
>
> Quick questions:
>
> Nicola Alessi wrote:
>
>> Tags: upstream
>
> Which upstream version did you test?
>
> [...]
>> I'm running linux-image-3.2.0-2-686-pae version 3.2.16-1 on debian wheezy. I
>> unsuccessfully tried version 3.2.17-1 from sid. The laptop is a Fujitsu Siemens
>> Amilo pi2515. My /proc/bus/input/devices says:
>
> Is this a regression? (In other words, did a previous version work
> better?) Does 3.3.y from experimental behave any differently?
>
> Please attach full "dmesg" output from booting and a copy of
> Xorg.0.log.
>
> Thanks and sorry for the trouble,
> Jonathan
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: FUJITSU SIEMENS AMILO Pi 2515/F43 , BIOS 1.11C 06/24/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f8080] f8080
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 371f4000 - 378f2000
[ 0.000000] ACPI: RSDP 000f8050 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f6d4a26 00074 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6dbcba 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6d60ca 05B7C (v02 FSC F43 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 7f6defc0 00040
[ 0.000000] ACPI: HPET 7f6dbdae 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6dbde6 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 7f6dbe22 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: SLIC 7f6dbe8a 00176 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 7f6d5ded 002DD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d5d1d 000D0 (v01 BrtRef DD01BRT 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d5107 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d5061 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d4a9a 005C7 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f6204200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2298 pages used for memmap
[ 0.000000] HighMem zone: 291800 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6000000 s33024 r0 d24320 u1048576
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=ce754bd4-1e36-4c3a-9343-dfa48ae2e393 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f6d0)
[ 0.000000] Memory: 2057608k/2087744k available (2841k kernel code, 29684k reserved, 1372k data, 412k init, 1176392k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c65ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c65ac (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.731 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.46 BogoMIPS (lpj=7182924)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.004052] AppArmor: AppArmor disabled by boot time parameter
[ 0.004070] Mount-cache hash table entries: 512
[ 0.004203] Initializing cgroup subsys cpuacct
[ 0.004208] Initializing cgroup subsys memory
[ 0.004217] Initializing cgroup subsys devices
[ 0.004220] Initializing cgroup subsys freezer
[ 0.004222] Initializing cgroup subsys net_cls
[ 0.004224] Initializing cgroup subsys blkio
[ 0.004231] Initializing cgroup subsys perf_event
[ 0.004263] CPU: Physical Processor ID: 0
[ 0.004265] CPU: Processor Core ID: 0
[ 0.004268] mce: CPU supports 6 MCE banks
[ 0.004276] CPU0: Thermal monitoring handled by SMI
[ 0.004280] using mwait in idle threads.
[ 0.004717] ACPI: Core revision 20110623
[ 0.012059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012490] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053155] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056003] PEBS disabled due to CPU errata.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] CPU 1 irqstacks, hard=f5cb4000 soft=f5cb6000
[ 0.056003] Booting Node 0, Processors #1 Ok.
[ 0.056003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.144038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144076] Brought up 2 CPUs
[ 0.144080] Total of 2 processors activated (7182.44 BogoMIPS).
[ 0.145546] devtmpfs: initialized
[ 0.145546] PM: Registering ACPI NVS region at 7f6d0000 (61440 bytes)
[ 0.145546] print_constraints: dummy:
[ 0.145546] NET: Registered protocol family 16
[ 0.145546] ACPI: bus type pci registered
[ 0.145546] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.145546] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.145546] PCI: Using MMCONFIG for extended config space
[ 0.145546] PCI: Using configuration type 1 for base access
[ 0.145546] bio: create slab <bio-0> at 0
[ 0.145546] ACPI: Added _OSI(Module Device)
[ 0.145546] ACPI: Added _OSI(Processor Device)
[ 0.145546] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.145546] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148665] ACPI: EC: Look up EC in DSDT
[ 0.151098] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.151490] ACPI: SSDT 7f6d5a1d 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.151806] ACPI: Dynamic OEM Table Load:
[ 0.151810] ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.151838] ACPI Error: No handler for Region [ECXP] (f5c41b78) [EmbeddedControl] (20110623/evregion-373)
[ 0.151844] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110623/exfldio-292)
[ 0.151851] ACPI Error: Method parse/execution failed [\_PR_.CPU0._OSC] (Node f5c443b0), AE_NOT_EXIST (20110623/psparse-536)
[ 0.151864] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PDC] (Node f5c443c8), AE_NOT_EXIST (20110623/psparse-536)
[ 0.152159] ACPI: SSDT 7f6d5c55 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.152466] ACPI: Dynamic OEM Table Load:
[ 0.152469] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.152583] ACPI: SSDT 7f6d5998 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.152879] ACPI: Dynamic OEM Table Load:
[ 0.152882] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.168115] ACPI: Interpreter enabled
[ 0.168129] ACPI: (supports S0 S3 S4 S5)
[ 0.168152] ACPI: Using IOAPIC for interrupt routing
[ 0.173592] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.173764] ACPI: No dock devices found.
[ 0.173766] HEST: Table not found.
[ 0.173772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.176401] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.176405] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.176408] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.176412] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.176415] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.176419] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.176422] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.176426] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.176429] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.176447] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.176504] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.176521] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
[ 0.176532] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.176539] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.176586] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.176601] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
[ 0.176702] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.176764] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.176812] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.176873] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.176937] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.176964] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff]
[ 0.177081] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.177088] pci 0000:00:1a.7: PME# disabled
[ 0.177122] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.177148] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
[ 0.177262] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.177268] pci 0000:00:1b.0: PME# disabled
[ 0.177302] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.177423] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.177428] pci 0000:00:1c.0: PME# disabled
[ 0.177467] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.177588] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.177594] pci 0000:00:1c.2: PME# disabled
[ 0.177629] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.177751] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.177757] pci 0000:00:1c.3: PME# disabled
[ 0.177793] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.177856] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.177904] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.177966] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.178013] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.178075] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.178136] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.178164] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff]
[ 0.178282] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.178288] pci 0000:00:1d.7: PME# disabled
[ 0.178317] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.178424] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.178545] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.178553] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.178559] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007)
[ 0.178564] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0260 (mask 000f)
[ 0.178629] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.178648] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.178662] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.178675] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.178689] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.178703] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.178763] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.178792] pci 0000:00:1f.2: reg 10: [io 0x1c00-0x1c07]
[ 0.178806] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
[ 0.178819] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
[ 0.178833] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
[ 0.178847] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.178860] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff]
[ 0.178932] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178938] pci 0000:00:1f.2: PME# disabled
[ 0.178963] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.178982] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.179028] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
[ 0.179137] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.179143] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.179149] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.179158] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.179332] pci 0000:04:00.0: [8086:4222] type 0 class 0x000280
[ 0.179391] pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.179821] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.179835] pci 0000:04:00.0: PME# disabled
[ 0.179908] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.179949] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.179955] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.179962] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.179971] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.180080] pci 0000:06:00.0: [10ec:8136] type 0 class 0x000200
[ 0.180107] pci 0000:06:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.180153] pci 0000:06:00.0: reg 18: [mem 0xfa000000-0xfa000fff 64bit]
[ 0.180206] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.180325] pci 0000:06:00.0: supports D1 D2
[ 0.180327] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.180335] pci 0000:06:00.0: PME# disabled
[ 0.180368] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.180382] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.180389] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.180395] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.180404] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.180504] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.180521] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.180524] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.180528] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.180531] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.180535] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.180538] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.180542] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.180545] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.180549] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.180579] pci_bus 0000:00: on NUMA node 0
[ 0.180583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.180913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.180980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.181079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.181095] ACPI Warning: For \_SB_.PCI0.PCIB._PRT: Return Package has no elements (empty) (20110623/nspredef-463)
[ 0.181316] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.181615] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.189032] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.189095] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.189156] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.189215] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.189276] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.189337] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.189397] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.189457] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.189565] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.189565] vgaarb: loaded
[ 0.189565] vgaarb: bridge control possible 0000:00:02.0
[ 0.189565] PCI: Using ACPI for IRQ routing
[ 0.201533] PCI: pci_cache_line_size set to 64 bytes
[ 0.201652] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.201656] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.201780] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.201788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.201794] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.204119] Switching to clocksource hpet
[ 0.206147] pnp: PnP ACPI init
[ 0.206164] ACPI: bus type pnp registered
[ 0.206547] pnp 00:00: [bus 00-ff]
[ 0.206551] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.206554] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.206557] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.206560] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.206563] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.206566] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.206569] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.206572] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.206575] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.206578] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.206581] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.206584] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.206587] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.206590] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.206593] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.206596] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.206599] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.206603] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.206606] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.206609] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.206673] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.206773] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.206777] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.206780] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.206782] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.206785] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.206788] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.206791] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.206793] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.206796] pnp 00:01: [mem 0xf0401000-0xf0401fff]
[ 0.206812] pnp 00:01: disabling [mem 0xf0401000-0xf0401fff] because it overlaps 0000:00:1c.0 BAR 15 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.206865] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.206869] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.206873] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.206878] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.206882] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.206886] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.206890] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.206894] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.206898] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.207382] pnp 00:02: [io 0x0000-0x001f]
[ 0.207386] pnp 00:02: [io 0x0081-0x0091]
[ 0.207388] pnp 00:02: [io 0x0093-0x009f]
[ 0.207391] pnp 00:02: [io 0x00c0-0x00df]
[ 0.207394] pnp 00:02: [dma 4]
[ 0.207446] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.207457] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.207507] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.207589] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.207665] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.207669] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.207684] pnp 00:05: [io 0x00f0]
[ 0.207695] pnp 00:05: [irq 13]
[ 0.207748] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.207764] pnp 00:06: [io 0x002e-0x002f]
[ 0.207767] pnp 00:06: [io 0x004e-0x004f]
[ 0.207769] pnp 00:06: [io 0x0061]
[ 0.207772] pnp 00:06: [io 0x0063]
[ 0.207774] pnp 00:06: [io 0x0065]
[ 0.207777] pnp 00:06: [io 0x0067]
[ 0.207779] pnp 00:06: [io 0x0068-0x006c]
[ 0.207782] pnp 00:06: [io 0x0070]
[ 0.207784] pnp 00:06: [io 0x0080]
[ 0.207786] pnp 00:06: [io 0x0092]
[ 0.207789] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.207792] pnp 00:06: [io 0x0200-0x020f]
[ 0.207794] pnp 00:06: [io 0x0260-0x026f]
[ 0.207797] pnp 00:06: [io 0x0300-0x030f]
[ 0.207799] pnp 00:06: [io 0x0378-0x0387]
[ 0.207802] pnp 00:06: [io 0x03f0-0x03ff]
[ 0.207805] pnp 00:06: [io 0x0680-0x069f]
[ 0.207807] pnp 00:06: [io 0x0800-0x080f]
[ 0.207810] pnp 00:06: [io 0x1000-0x107f]
[ 0.207812] pnp 00:06: [io 0x1180-0x11bf]
[ 0.207815] pnp 00:06: [io 0x1640-0x164f]
[ 0.207817] pnp 00:06: [io 0xfe00]
[ 0.207938] system 00:06: [io 0x0200-0x020f] has been reserved
[ 0.207942] system 00:06: [io 0x0260-0x026f] has been reserved
[ 0.207946] system 00:06: [io 0x0300-0x030f] has been reserved
[ 0.207949] system 00:06: [io 0x0378-0x0387] has been reserved
[ 0.207953] system 00:06: [io 0x03f0-0x03ff] could not be reserved
[ 0.207957] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.207960] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.207964] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.207968] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.207971] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.207976] system 00:06: [io 0xfe00] has been reserved
[ 0.207980] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.207993] pnp 00:07: [io 0x0070-0x0077]
[ 0.207999] pnp 00:07: [irq 8]
[ 0.208062] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.208076] pnp 00:08: [io 0x0060]
[ 0.208079] pnp 00:08: [io 0x0064]
[ 0.208085] pnp 00:08: [irq 1]
[ 0.208144] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.208159] pnp 00:09: [irq 12]
[ 0.208212] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.208245] pnp: PnP ACPI: found 10 devices
[ 0.208247] ACPI: ACPI bus type pnp unregistered
[ 0.208252] PnPBIOS: Disabled by ACPI PNP
[ 0.245845] PCI: max bus depth: 1 pci_try_num: 2
[ 0.245898] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff]
[ 0.245905] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff] (PCI address [0x80000000-0x800000ff])
[ 0.245909] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.245914] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.245921] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.245928] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.245937] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.245942] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.245949] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.245955] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.245966] pci 0000:06:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[ 0.245969] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.245974] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.245981] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.245988] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.245997] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.246028] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.246034] pci 0000:00:1c.0: setting latency timer to 64
[ 0.246047] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.246053] pci 0000:00:1c.2: setting latency timer to 64
[ 0.246066] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.246072] pci 0000:00:1c.3: setting latency timer to 64
[ 0.246082] pci 0000:00:1e.0: setting latency timer to 64
[ 0.246087] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.246090] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.246093] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246096] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.246099] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.246102] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.246105] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.246108] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff]
[ 0.246111] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.246114] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.246117] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.246120] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.246124] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.246127] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.246130] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.246133] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.246136] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.246139] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.246143] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.246146] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.246149] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246152] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.246155] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.246157] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.246160] pci_bus 0000:08: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.246164] pci_bus 0000:08: resource 11 [mem 0x80000000-0xdfffffff]
[ 0.246167] pci_bus 0000:08: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.246229] NET: Registered protocol family 2
[ 0.246304] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.246581] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.247018] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.247225] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.247228] TCP reno registered
[ 0.247232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.247242] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.247329] NET: Registered protocol family 1
[ 0.247347] pci 0000:00:02.0: Boot video device
[ 0.247370] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.247392] pci 0000:00:1a.0: PCI INT A disabled
[ 0.247405] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.247427] pci 0000:00:1a.1: PCI INT B disabled
[ 0.247439] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247472] pci 0000:00:1a.7: PCI INT C disabled
[ 0.247499] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247521] pci 0000:00:1d.0: PCI INT A disabled
[ 0.247530] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.247552] pci 0000:00:1d.1: PCI INT B disabled
[ 0.247562] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247583] pci 0000:00:1d.2: PCI INT C disabled
[ 0.247595] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247615] pci 0000:00:1d.7: PCI INT A disabled
[ 0.247646] PCI: CLS 64 bytes, default 64
[ 0.247712] Unpacking initramfs...
[ 1.707494] Freeing initrd memory: 7160k freed
[ 1.711312] audit: initializing netlink socket (disabled)
[ 1.711329] type=2000 audit(1337504943.704:1): initialized
[ 1.730880] highmem bounce pool size: 64 pages
[ 1.730886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.738003] VFS: Disk quotas dquot_6.5.2
[ 1.738050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.738136] msgmni has been set to 1735
[ 1.738335] alg: No test for stdrng (krng)
[ 1.738372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.738376] io scheduler noop registered
[ 1.738379] io scheduler deadline registered
[ 1.738395] io scheduler cfq registered (default)
[ 1.738514] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.738580] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.738727] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.738788] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.738929] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.738990] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.739159] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.739165] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.739191] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.739195] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.739201] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.739227] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.739230] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.739236] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.739260] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.739330] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1734 ss_did 1108
[ 1.739359] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.739376] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1734 ss_did 1108
[ 1.739401] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 1.739418] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 1734 ss_did 1108
[ 1.739442] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 1.739451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.739454] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.739885] intel_idle: MWAIT substates: 0x22220
[ 1.739888] intel_idle: does not run on family 6 model 15
[ 1.739918] ERST: Table is not found!
[ 1.739920] GHES: HEST is not enabled!
[ 1.739938] isapnp: Scanning for PnP cards...
[ 2.094165] isapnp: No Plug & Play device found
[ 2.094252] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.100429] Linux agpgart interface v0.103
[ 2.100579] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 2.100667] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 2.101203] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 2.101350] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.101539] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.106681] i8042: Detected active multiplexing controller, rev 1.1
[ 2.109144] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.109153] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.109190] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.109226] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.109258] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.109415] mousedev: PS/2 mouse device common for all mice
[ 2.109620] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.109655] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.109667] cpuidle: using governor ladder
[ 2.109669] cpuidle: using governor menu
[ 2.109924] TCP cubic registered
[ 2.109970] NET: Registered protocol family 10
[ 2.110569] Mobile IPv6
[ 2.110573] NET: Registered protocol family 17
[ 2.110577] Registering the dns_resolver key type
[ 2.110597] Using IPI No-Shortcut mode
[ 2.110725] PM: Hibernation image not present or could not be loaded.
[ 2.110738] registered taskstats version 1
[ 2.114721] rtc_cmos 00:07: setting system clock to 2012-05-20 09:09:04 UTC (1337504944)
[ 2.114783] Initializing network drop monitor service
[ 2.114901] Freeing unused kernel memory: 412k freed
[ 2.115092] Write protecting the kernel text: 2844k
[ 2.115137] Write protecting the kernel read-only data: 1112k
[ 2.115139] NX-protecting the kernel data: 3300k
[ 2.131681] udevd[49]: starting version 175
[ 2.148163] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.188834] SCSI subsystem initialized
[ 2.192297] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.192304] ACPI: Power Button [PWRB]
[ 2.192379] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.192420] ACPI: Lid Switch [LID]
[ 2.192485] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.192490] ACPI: Sleep Button [SLPB]
[ 2.192552] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.192556] ACPI: Power Button [PWRF]
[ 2.193956] [drm] Initialized drm 1.1.0 20060810
[ 2.203881] libata version 3.00 loaded.
[ 2.205695] ahci 0000:00:1f.2: version 3.0
[ 2.205713] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.205776] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.205851] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 2.205856] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 2.205862] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.207938] scsi0 : ahci
[ 2.209410] scsi1 : ahci
[ 2.209502] scsi2 : ahci
[ 2.209688] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 43
[ 2.209693] ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 43
[ 2.209698] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 43
[ 2.224494] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.224501] i915 0000:00:02.0: setting latency timer to 64
[ 2.240954] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.240958] ACPI: Thermal Zone [THRM] (32 C)
[ 2.249032] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.249040] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.249043] [drm] Driver supports precise vblank timestamp query.
[ 2.249091] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.301491] fixme: max PWM is zero.
[ 2.532035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.532061] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.532088] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.533183] ata1.00: unexpected _GTF length (8)
[ 2.533449] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 2.533453] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.534802] ata1.00: unexpected _GTF length (8)
[ 2.535030] ata1.00: configured for UDMA/133
[ 2.535176] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 2.539654] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.539732] sd 0:0:0:0: [sda] Write Protect is off
[ 2.539737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.539764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.572768] [drm] initialized overlay support
[ 2.585448] fbcon: inteldrmfb (fb0) is primary device
[ 2.708018] Refined TSC clocksource calibration: 1795.499 MHz.
[ 2.708023] Switching to clocksource tsc
[ 2.828578] sda: sda1 sda2 sda3
[ 2.828968] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.013043] Console: switching to colour frame buffer device 160x50
[ 3.018027] fb0: inteldrmfb frame buffer device
[ 3.018029] drm: registered panic notifier
[ 3.019075] ACPI Warning: For \_SB_.PCI0.GFX0.DD02._BQC: Return type mismatch - found Reference, expected Integer (20110623/nspredef-1060)
[ 3.022247] acpi device:04: registered as cooling_device0
[ 3.120110] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.120119] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.120181] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.462731] PM: Starting manual resume from disk
[ 4.462736] PM: Hibernation image partition 8:2 present
[ 4.462738] PM: Looking for hibernation image.
[ 4.463166] PM: Image not found (code -22)
[ 4.463168] PM: Hibernation image not present or could not be loaded.
[ 4.537158] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.349647] udevd[279]: starting version 175
[ 8.526172] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 8.526179] ACPI: resource 0000:00:1f.3 [io 0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f]
[ 8.526182] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.542175] ACPI: AC Adapter [AC0] (on-line)
[ 8.547617] Marking TSC unstable due to TSC halts in idle
[ 8.547626] ACPI: acpi_idle registered with cpuidle
[ 8.547739] Switching to clocksource hpet
[ 8.549207] ACPI Error: [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 8.549215] ACPI Error: Method parse/execution failed [\_PR_.CPU1._CST] (Node f5c44bf0), AE_NOT_FOUND (20110623/psparse-536)
[ 8.576662] usbcore: registered new interface driver usbfs
[ 8.576695] usbcore: registered new interface driver hub
[ 8.577582] usbcore: registered new device driver usb
[ 8.674349] iTCO_vendor_support: vendor-support=0
[ 8.787245] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.792943] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.828157] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.828272] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 8.828823] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.884296] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.884324] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.884363] r8169 0000:06:00.0: setting latency timer to 64
[ 8.884461] r8169 0000:06:00.0: irq 45 for MSI/MSI-X
[ 8.885032] r8169 0000:06:00.0: eth0: RTL8101e at 0xf8248000, 00:03:0d:69:1c:ef, XID 14000000 IRQ 45
[ 8.955494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.955529] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.955552] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 8.955557] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 8.955588] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 8.955621] ehci_hcd 0000:00:1a.7: debug port 1
[ 8.959515] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 8.959540] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[ 8.972023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.972054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.972058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.972061] usb usb1: Product: EHCI Host Controller
[ 8.972063] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 8.972066] usb usb1: SerialNumber: 0000:00:1a.7
[ 8.972222] hub 1-0:1.0: USB hub found
[ 8.972228] hub 1-0:1.0: 4 ports detected
[ 8.972335] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.972361] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8.972365] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.972375] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.972408] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.976303] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 8.976325] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 8.992024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.992052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.992056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.992059] usb usb2: Product: EHCI Host Controller
[ 8.992062] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 8.992065] usb usb2: SerialNumber: 0000:00:1d.7
[ 8.992210] hub 2-0:1.0: USB hub found
[ 8.992216] hub 2-0:1.0: 6 ports detected
[ 9.168137] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.168187] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.168200] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 9.168205] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 9.168221] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 9.168270] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 9.168315] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.168319] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.168322] usb usb3: Product: UHCI Host Controller
[ 9.168324] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 9.168327] usb usb3: SerialNumber: 0000:00:1a.0
[ 9.168489] hub 3-0:1.0: USB hub found
[ 9.168495] hub 3-0:1.0: 2 ports detected
[ 9.168597] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 9.168607] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 9.168612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 9.168630] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 9.168675] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 9.168715] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.168719] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.168722] usb usb4: Product: UHCI Host Controller
[ 9.168724] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 9.168727] usb usb4: SerialNumber: 0000:00:1a.1
[ 9.168855] hub 4-0:1.0: USB hub found
[ 9.168860] hub 4-0:1.0: 2 ports detected
[ 9.168956] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.168966] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9.168970] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.168979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 9.169012] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 9.169051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.169055] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.169058] usb usb5: Product: UHCI Host Controller
[ 9.169060] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 9.169063] usb usb5: SerialNumber: 0000:00:1d.0
[ 9.169192] hub 5-0:1.0: USB hub found
[ 9.169197] hub 5-0:1.0: 2 ports detected
[ 9.169285] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.169295] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9.169299] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.169308] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 9.169352] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 9.169390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.169394] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.169396] usb usb6: Product: UHCI Host Controller
[ 9.169399] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 9.169402] usb usb6: SerialNumber: 0000:00:1d.1
[ 9.169524] hub 6-0:1.0: USB hub found
[ 9.169529] hub 6-0:1.0: 2 ports detected
[ 9.169613] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.169623] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9.169627] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.169636] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 9.169670] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 9.169709] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.169712] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.169715] usb usb7: Product: UHCI Host Controller
[ 9.169718] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 9.169721] usb usb7: SerialNumber: 0000:00:1d.2
[ 9.169841] hub 7-0:1.0: USB hub found
[ 9.169846] hub 7-0:1.0: 2 ports detected
[ 9.230318] ata_piix 0000:00:1f.1: version 2.13
[ 9.230337] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.230388] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 9.230831] scsi3 : ata_piix
[ 9.230915] scsi4 : ata_piix
[ 9.231416] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 9.231420] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 9.395963] ata4.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
[ 9.412288] ata4.00: configured for UDMA/33
[ 9.413664] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
[ 9.586012] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
[ 9.611407] cfg80211: Calling CRDA to update world regulatory domain
[ 9.751769] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 9.751773] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 9.751851] iwl3945 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.751866] iwl3945 0000:04:00.0: setting latency timer to 64
[ 9.805357] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 9.805361] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 9.805513] iwl3945 0000:04:00.0: irq 46 for MSI/MSI-X
[ 9.805674] Registered led device: phy0-led
[ 9.821945] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.821949] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.822171] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 9.862192] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 10.244349] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.244443] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.244482] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.361387] hda_codec: ALC883: SKU not ready 0x598301f0
[ 10.362054] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 10.370122] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.024820] cfg80211: World regulatory domain updated:
[ 11.024826] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.024830] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.024834] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.024837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.024841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.024844] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.527666] Adding 976892k swap on /dev/sda2. Priority:-1 extents:1 across:976892k
[ 12.543641] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.999820] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.127690] loop: module loaded
[ 13.983062] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 15.141876] RPC: Registered named UNIX socket transport module.
[ 15.141879] RPC: Registered udp transport module.
[ 15.141882] RPC: Registered tcp transport module.
[ 15.141884] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.234649] FS-Cache: Loaded
[ 15.306325] FS-Cache: Netfs 'nfs' registered for caching
[ 15.344319] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.291317] fuse init (API version 7.17)
[ 21.819604] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 21.889874] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.919936] r8169 0000:06:00.0: eth0: link down
[ 21.920148] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.135066] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 25.549787] Bluetooth: Core ver 2.16
[ 25.549810] NET: Registered protocol family 31
[ 25.549812] Bluetooth: HCI device and connection manager initialized
[ 25.549816] Bluetooth: HCI socket layer initialized
[ 25.549819] Bluetooth: L2CAP socket layer initialized
[ 25.549825] Bluetooth: SCO socket layer initialized
[ 25.583750] Bluetooth: RFCOMM TTY layer initialized
[ 25.583757] Bluetooth: RFCOMM socket layer initialized
[ 25.583759] Bluetooth: RFCOMM ver 1.11
[ 25.587871] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.587874] Bluetooth: BNEP filters: protocol multicast
[ 26.195758] lp: driver loaded but no devices found
[ 26.199716] ppdev: user-space parallel port driver
[ 30.243832] wlan0: authenticate with 00:12:17:bc:d1:8b (try 1)
[ 30.245727] wlan0: authenticated
[ 30.249137] wlan0: associate with 00:12:17:bc:d1:8b (try 1)
[ 30.251551] wlan0: RX AssocResp from 00:12:17:bc:d1:8b (capab=0x411 status=0 aid=1)
[ 30.251555] wlan0: associated
[ 30.252970] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.337323] Intel AES-NI instructions are not detected.
[ 36.402694] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 36.419329] NFSD: starting 90-second grace period
[ 41.216015] wlan0: no IPv6 routers present
[ 44.568817] vboxdrv: Found 2 processor cores.
[ 44.568945] vboxdrv: fAsync=0 offMin=0x1dd offMax=0xac2
[ 44.569009] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 44.569012] vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
[ 44.827253] vboxpci: IOMMU not found (not registered)
[ 28.710]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 28.710] X Protocol Version 11, Revision 0
[ 28.710] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 28.710] Current Operating System: Linux ehehehpc 3.2.0-2-686-pae #1 SMP Mon Apr 30 05:59:35 UTC 2012 i686
[ 28.710] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=ce754bd4-1e36-4c3a-9343-dfa48ae2e393 ro quiet splash
[ 28.710] Build Date: 07 May 2012 12:52:03AM
[ 28.710] xorg-server 2:1.12.1-2 (Cyril Brulebois <kibi@debian.org>)
[ 28.710] Current version of pixman: 0.24.4
[ 28.710] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.710] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.710] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 20 11:09:31 2012
[ 28.772] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.772] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.810] (==) No Layout section. Using the first Screen section.
[ 28.810] (==) No screen section available. Using defaults.
[ 28.810] (**) |-->Screen "Default Screen Section" (0)
[ 28.810] (**) | |-->Monitor "<default monitor>"
[ 28.817] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.817] (==) Automatically adding devices
[ 28.817] (==) Automatically enabling devices
[ 28.864] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.864] Entry deleted from font path.
[ 28.940] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.940] Entry deleted from font path.
[ 28.940] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 28.940] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.940] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.956] (II) Loader magic: 0xb775a580
[ 28.956] (II) Module ABI versions:
[ 28.956] X.Org ANSI C Emulation: 0.4
[ 28.956] X.Org Video Driver: 12.0
[ 28.956] X.Org XInput driver : 16.0
[ 28.956] X.Org Server Extension : 6.0
[ 28.957] (--) PCI:*(0:0:2:0) 8086:2a02:1734:1108 rev 3, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 28.957] (--) PCI: (0:0:2:1) 8086:2a03:1734:1108 rev 3, Mem @ 0xfc100000/1048576
[ 28.957] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.957] (II) LoadModule: "extmod"
[ 28.982] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 29.004] (II) Module extmod: vendor="X.Org Foundation"
[ 29.004] compiled for 1.12.1, module version = 1.0.0
[ 29.004] Module class: X.Org Server Extension
[ 29.004] ABI class: X.Org Server Extension, version 6.0
[ 29.004] (II) Loading extension SELinux
[ 29.004] (II) Loading extension MIT-SCREEN-SAVER
[ 29.004] (II) Loading extension XFree86-VidModeExtension
[ 29.004] (II) Loading extension XFree86-DGA
[ 29.004] (II) Loading extension DPMS
[ 29.004] (II) Loading extension XVideo
[ 29.004] (II) Loading extension XVideo-MotionCompensation
[ 29.004] (II) Loading extension X-Resource
[ 29.004] (II) LoadModule: "dbe"
[ 29.004] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 29.021] (II) Module dbe: vendor="X.Org Foundation"
[ 29.021] compiled for 1.12.1, module version = 1.0.0
[ 29.021] Module class: X.Org Server Extension
[ 29.021] ABI class: X.Org Server Extension, version 6.0
[ 29.021] (II) Loading extension DOUBLE-BUFFER
[ 29.021] (II) LoadModule: "glx"
[ 29.022] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.052] (II) Module glx: vendor="X.Org Foundation"
[ 29.052] compiled for 1.12.1, module version = 1.0.0
[ 29.052] ABI class: X.Org Server Extension, version 6.0
[ 29.052] (==) AIGLX enabled
[ 29.053] (II) Loading extension GLX
[ 29.053] (II) LoadModule: "record"
[ 29.053] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.054] (II) Module record: vendor="X.Org Foundation"
[ 29.054] compiled for 1.12.1, module version = 1.13.0
[ 29.054] Module class: X.Org Server Extension
[ 29.054] ABI class: X.Org Server Extension, version 6.0
[ 29.054] (II) Loading extension RECORD
[ 29.054] (II) LoadModule: "dri"
[ 29.054] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.066] (II) Module dri: vendor="X.Org Foundation"
[ 29.066] compiled for 1.12.1, module version = 1.0.0
[ 29.066] ABI class: X.Org Server Extension, version 6.0
[ 29.066] (II) Loading extension XFree86-DRI
[ 29.066] (II) LoadModule: "dri2"
[ 29.067] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.079] (II) Module dri2: vendor="X.Org Foundation"
[ 29.079] compiled for 1.12.1, module version = 1.2.0
[ 29.079] ABI class: X.Org Server Extension, version 6.0
[ 29.079] (II) Loading extension DRI2
[ 29.079] (==) Matched intel as autoconfigured driver 0
[ 29.079] (==) Matched vesa as autoconfigured driver 1
[ 29.079] (==) Matched fbdev as autoconfigured driver 2
[ 29.079] (==) Assigned the driver to the xf86ConfigLayout
[ 29.079] (II) LoadModule: "intel"
[ 29.122] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.359] (II) Module intel: vendor="X.Org Foundation"
[ 29.359] compiled for 1.12.1, module version = 2.18.0
[ 29.359] Module class: X.Org Video Driver
[ 29.359] ABI class: X.Org Video Driver, version 12.0
[ 29.359] (II) LoadModule: "vesa"
[ 29.359] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.403] (II) Module vesa: vendor="X.Org Foundation"
[ 29.403] compiled for 1.12.1, module version = 2.3.1
[ 29.403] Module class: X.Org Video Driver
[ 29.403] ABI class: X.Org Video Driver, version 12.0
[ 29.403] (II) LoadModule: "fbdev"
[ 29.403] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.434] (II) Module fbdev: vendor="X.Org Foundation"
[ 29.434] compiled for 1.12.1, module version = 0.4.2
[ 29.434] ABI class: X.Org Video Driver, version 12.0
[ 29.434] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 29.434] (II) VESA: driver for VESA chipsets: vesa
[ 29.435] (II) FBDEV: driver for framebuffer: fbdev
[ 29.435] (++) using VT number 7
[ 29.437] (WW) Falling back to old probe method for vesa
[ 29.437] (WW) Falling back to old probe method for fbdev
[ 29.437] (II) Loading sub module "fbdevhw"
[ 29.437] (II) LoadModule: "fbdevhw"
[ 29.437] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29.474] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 29.474] compiled for 1.12.1, module version = 0.0.2
[ 29.474] ABI class: X.Org Video Driver, version 12.0
[ 29.474] drmOpenDevice: node name is /dev/dri/card0
[ 29.474] drmOpenDevice: open result is 9, (OK)
[ 29.474] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 29.474] drmOpenDevice: node name is /dev/dri/card0
[ 29.474] drmOpenDevice: open result is 9, (OK)
[ 29.474] drmOpenByBusid: drmOpenMinor returns 9
[ 29.474] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29.474] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.474] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.474] (==) intel(0): RGB weight 888
[ 29.474] (==) intel(0): Default visual is TrueColor
[ 29.474] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 29.474] (--) intel(0): Chipset: "965GM"
[ 29.474] (**) intel(0): Relaxed fencing enabled
[ 29.474] (**) intel(0): Wait on SwapBuffers? enabled
[ 29.474] (**) intel(0): Triple buffering? enabled
[ 29.474] (**) intel(0): Framebuffer tiled
[ 29.474] (**) intel(0): Pixmaps tiled
[ 29.474] (**) intel(0): 3D buffers tiled
[ 29.474] (**) intel(0): SwapBuffers wait enabled
[ 29.474] (==) intel(0): video overlay key set to 0x101fe
[ 29.475] (II) intel(0): Output LVDS1 has no monitor section
[ 29.475] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 29.496] (II) intel(0): Output VGA1 has no monitor section
[ 29.496] (II) intel(0): EDID for output LVDS1
[ 29.496] (II) intel(0): Manufacturer: SEC Model: 4345 Serial#: 0
[ 29.496] (II) intel(0): Year: 2007 Week: 0
[ 29.496] (II) intel(0): EDID Version: 1.3
[ 29.496] (II) intel(0): Digital Display Input
[ 29.496] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 29.496] (II) intel(0): Gamma: 2.20
[ 29.496] (II) intel(0): No DPMS capabilities specified
[ 29.496] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.496] (II) intel(0): First detailed timing is preferred mode
[ 29.496] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 29.496] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 29.496] (II) intel(0): Manufacturer's mask: 0
[ 29.496] (II) intel(0): Supported detailed timing:
[ 29.496] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 29.496] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
[ 29.496] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 29.496] (II) intel(0): Unknown vendor-specific block f
[ 29.496] (II) intel(0): SAMSUNG
[ 29.496] (II) intel(0): LTN154X3-L03
[ 29.496] (II) intel(0): EDID (in hex):
[ 29.496] (II) intel(0): 00ffffffffffff004ca3454300000000
[ 29.496] (II) intel(0): 00110103802115780a87f594574f8c27
[ 29.496] (II) intel(0): 27505400000001010101010101010101
[ 29.496] (II) intel(0): 010101010101ee1a0080502010301030
[ 29.496] (II) intel(0): 13004bcf100000190000000f00000000
[ 29.496] (II) intel(0): 00000000002387026402000000fe0053
[ 29.496] (II) intel(0): 414d53554e470a2020202020000000fe
[ 29.496] (II) intel(0): 004c544e31353458332d4c30330a0052
[ 29.496] (II) intel(0): EDID vendor "SEC", prod id 17221
[ 29.496] (II) intel(0): Printing DDC gathered Modelines:
[ 29.496] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 29.535] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 29.535] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.536] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.536] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 29.536] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 29.536] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.536] (II) intel(0): Printing probed modes for output LVDS1
[ 29.536] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 29.536] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 29.536] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 29.536] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 29.536] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 29.552] (II) intel(0): EDID for output VGA1
[ 29.552] (II) intel(0): Output LVDS1 connected
[ 29.552] (II) intel(0): Output VGA1 disconnected
[ 29.552] (II) intel(0): Using exact sizes for initial modes
[ 29.552] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 29.552] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.552] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.552] (**) intel(0): Display dimensions: (330, 210) mm
[ 29.552] (**) intel(0): DPI set to (98, 96)
[ 29.552] (II) Loading sub module "fb"
[ 29.552] (II) LoadModule: "fb"
[ 29.552] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.629] (II) Module fb: vendor="X.Org Foundation"
[ 29.629] compiled for 1.12.1, module version = 1.0.0
[ 29.629] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.629] (II) Loading sub module "dri2"
[ 29.629] (II) LoadModule: "dri2"
[ 29.629] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.629] (II) Module dri2: vendor="X.Org Foundation"
[ 29.629] compiled for 1.12.1, module version = 1.2.0
[ 29.629] ABI class: X.Org Server Extension, version 6.0
[ 29.629] (II) UnloadModule: "vesa"
[ 29.629] (II) Unloading vesa
[ 29.629] (II) UnloadModule: "fbdev"
[ 29.629] (II) Unloading fbdev
[ 29.629] (II) UnloadSubModule: "fbdevhw"
[ 29.629] (II) Unloading fbdevhw
[ 29.629] (==) Depth 24 pixmap format is 32 bpp
[ 29.629] (II) intel(0): [DRI2] Setup complete
[ 29.629] (II) intel(0): [DRI2] DRI driver: i965
[ 29.629] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 29.721] (II) UXA(0): Driver registered support for the following operations:
[ 29.721] (II) solid
[ 29.721] (II) copy
[ 29.721] (II) composite (RENDER acceleration)
[ 29.721] (II) put_image
[ 29.721] (II) get_image
[ 29.721] (==) intel(0): Backing store disabled
[ 29.721] (==) intel(0): Silken mouse enabled
[ 29.721] (II) intel(0): Initializing HW Cursor
[ 29.732] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.734] (==) intel(0): DPMS enabled
[ 29.734] (==) intel(0): Intel XvMC decoder enabled
[ 29.734] (II) intel(0): Set up textured video
[ 29.734] (II) intel(0): Set up overlay video
[ 29.734] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 29.734] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.734] (==) intel(0): hotplug detection: "enabled"
[ 29.734] (--) RandR disabled
[ 29.734] (II) Initializing built-in extension Generic Event Extension
[ 29.734] (II) Initializing built-in extension SHAPE
[ 29.734] (II) Initializing built-in extension MIT-SHM
[ 29.734] (II) Initializing built-in extension XInputExtension
[ 29.734] (II) Initializing built-in extension XTEST
[ 29.734] (II) Initializing built-in extension BIG-REQUESTS
[ 29.734] (II) Initializing built-in extension SYNC
[ 29.734] (II) Initializing built-in extension XKEYBOARD
[ 29.734] (II) Initializing built-in extension XC-MISC
[ 29.734] (II) Initializing built-in extension SECURITY
[ 29.734] (II) Initializing built-in extension XINERAMA
[ 29.734] (II) Initializing built-in extension XFIXES
[ 29.734] (II) Initializing built-in extension RENDER
[ 29.734] (II) Initializing built-in extension RANDR
[ 29.734] (II) Initializing built-in extension COMPOSITE
[ 29.734] (II) Initializing built-in extension DAMAGE
[ 29.734] (II) SELinux: Disabled on system
[ 30.107] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 31.040] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 31.040] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 31.040] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 31.040] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 31.040] (II) AIGLX: Loaded and initialized i965
[ 31.040] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.041] (II) intel(0): Setting screen physical size to 338 x 211
[ 32.966] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 32.966] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.966] (II) LoadModule: "evdev"
[ 32.966] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 33.277] (II) Module evdev: vendor="X.Org Foundation"
[ 33.277] compiled for 1.12.1, module version = 2.7.0
[ 33.277] Module class: X.Org XInput Driver
[ 33.277] ABI class: X.Org XInput driver, version 16.0
[ 33.277] (II) Using input driver 'evdev' for 'Power Button'
[ 33.277] (**) Power Button: always reports core events
[ 33.277] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 33.277] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.277] (--) evdev: Power Button: Found keys
[ 33.277] (II) evdev: Power Button: Configuring as keyboard
[ 33.277] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 33.277] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33.277] (**) Option "xkb_rules" "evdev"
[ 33.277] (**) Option "xkb_model" "pc105"
[ 33.277] (**) Option "xkb_layout" "es"
[ 33.407] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 33.407] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 33.407] (II) Using input driver 'evdev' for 'Video Bus'
[ 33.407] (**) Video Bus: always reports core events
[ 33.407] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 33.407] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 33.407] (--) evdev: Video Bus: Found keys
[ 33.407] (II) evdev: Video Bus: Configuring as keyboard
[ 33.407] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 33.407] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 33.407] (**) Option "xkb_rules" "evdev"
[ 33.407] (**) Option "xkb_model" "pc105"
[ 33.407] (**) Option "xkb_layout" "es"
[ 33.408] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 33.408] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.408] (II) Using input driver 'evdev' for 'Power Button'
[ 33.408] (**) Power Button: always reports core events
[ 33.408] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 33.408] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.408] (--) evdev: Power Button: Found keys
[ 33.408] (II) evdev: Power Button: Configuring as keyboard
[ 33.408] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 33.408] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 33.408] (**) Option "xkb_rules" "evdev"
[ 33.408] (**) Option "xkb_model" "pc105"
[ 33.408] (**) Option "xkb_layout" "es"
[ 33.409] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 33.409] (II) No input driver specified, ignoring this device.
[ 33.409] (II) This device may have been added with another device file.
[ 33.409] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 33.409] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 33.409] (II) Using input driver 'evdev' for 'Sleep Button'
[ 33.409] (**) Sleep Button: always reports core events
[ 33.409] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 33.409] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 33.409] (--) evdev: Sleep Button: Found keys
[ 33.409] (II) evdev: Sleep Button: Configuring as keyboard
[ 33.409] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 33.409] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 33.409] (**) Option "xkb_rules" "evdev"
[ 33.409] (**) Option "xkb_model" "pc105"
[ 33.409] (**) Option "xkb_layout" "es"
[ 33.410] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 33.410] (II) No input driver specified, ignoring this device.
[ 33.410] (II) This device may have been added with another device file.
[ 33.410] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 33.410] (II) No input driver specified, ignoring this device.
[ 33.410] (II) This device may have been added with another device file.
[ 33.411] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 33.411] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.411] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 33.411] (**) AT Translated Set 2 keyboard: always reports core events
[ 33.411] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 33.411] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 33.411] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 33.411] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 33.411] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 33.411] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 33.411] (**) Option "xkb_rules" "evdev"
[ 33.411] (**) Option "xkb_model" "pc105"
[ 33.411] (**) Option "xkb_layout" "es"
[ 33.412] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event7)
[ 33.412] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 33.412] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 33.412] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[ 33.412] (**) PS/2 Logitech Wheel Mouse: always reports core events
[ 33.412] (**) evdev: PS/2 Logitech Wheel Mouse: Device: "/dev/input/event7"
[ 33.412] (--) evdev: PS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x1
[ 33.412] (--) evdev: PS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 33.412] (--) evdev: PS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 33.412] (--) evdev: PS/2 Logitech Wheel Mouse: Found relative axes
[ 33.412] (--) evdev: PS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 33.412] (II) evdev: PS/2 Logitech Wheel Mouse: Configuring as mouse
[ 33.412] (II) evdev: PS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 33.412] (**) Option "Emulate3Buttons" "true"
[ 33.412] (**) Option "EmulateWheel" "true"
[ 33.412] (**) Option "EmulateWheelButton" "2"
[ 33.412] (**) Option "YAxisMapping" "4 5"
[ 33.412] (**) evdev: PS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 33.412] (**) evdev: PS/2 Logitech Wheel Mouse: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 33.412] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 33.412] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE, id 11)
[ 33.412] (II) evdev: PS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 33.413] (**) PS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 33.413] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 33.413] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 33.413] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 33.413] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 33.413] (II) No input driver specified, ignoring this device.
[ 33.413] (II) This device may have been added with another device file.
[ 33.414] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 33.414] (II) No input driver specified, ignoring this device.
[ 33.414] (II) This device may have been added with another device file.
[ 33.414] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event10)
[ 33.414] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 33.414] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 33.414] (**) ACPI Virtual Keyboard Device: always reports core events
[ 33.414] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event10"
[ 33.414] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 33.414] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 33.414] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 33.414] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[ 33.414] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[ 33.414] (**) Option "xkb_rules" "evdev"
[ 33.415] (**) Option "xkb_model" "pc105"
[ 33.415] (**) Option "xkb_layout" "es"
[ 94.486] (II) intel(0): EDID vendor "SEC", prod id 17221
[ 94.486] (II) intel(0): Printing DDC gathered Modelines:
[ 94.486] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 96.669] (II) intel(0): EDID vendor "SEC", prod id 17221
[ 96.669] (II) intel(0): Printing DDC gathered Modelines:
[ 96.669] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 100.855] (II) intel(0): EDID vendor "SEC", prod id 17221
[ 100.962] (II) intel(0): Printing DDC gathered Modelines:
[ 100.962] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
--- End Message ---