Bug#673418: linux-image-2.6.32-5-kirkwood: Can't load module ipv6
Package: linux-2.6
Version: 2.6.32-44
Severity: normal
At boot time the ipv6 module did not load in the dmesg you can see the following message:
[ 31.554510] ipv6: Unknown symbol sock_queue_err_skb
Any idea to fix the problem?
cu
Franz
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Wed Jan 12 15:27:07 UTC 2011
** Command line:
console=ttyS0,115200
** Not tainted
** Kernel log:
[ 22.107859] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 22.107871] io scheduler noop registered
[ 22.107878] io scheduler anticipatory registered
[ 22.107886] io scheduler deadline registered
[ 22.108063] io scheduler cfq registered (default)
[ 22.113985] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 22.114432] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 22.433741] console [ttyS0] enabled
[ 22.437787] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
[ 22.446481] Scanning device for bad blocks
[ 22.570226] Creating 3 MTD partitions on "orion_nand":
[ 22.575407] 0x000000000000-0x000000100000 : "u-boot"
[ 22.580961] 0x000000100000-0x000000500000 : "uImage"
[ 22.586430] 0x000000500000-0x000020000000 : "root"
[ 22.592654] mice: PS/2 mouse device common for all mice
[ 22.598136] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 22.604081] i2c /dev entries driver
[ 22.607781] cpuidle: using governor ladder
[ 22.612027] cpuidle: using governor menu
[ 22.616060] Registered led device: plug:green:health
[ 22.621115] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 22.627517] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 22.671036] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 22.711032] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 22.751030] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 22.791031] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 22.797688] TCP cubic registered
[ 22.800935] NET: Registered protocol family 17
[ 22.805433] Gating clock of unused units
[ 22.805441] before: 0x00c701dd
[ 22.805448] after: 0x00c701d9
[ 22.805741] registered taskstats version 1
[ 22.810469] rtc-mv rtc-mv: setting system clock to 2012-05-18 13:54:13 UTC (1337349253)
[ 22.818533] Initalizing network drop monitor service
[ 22.823595] Freeing init memory: 124K
[ 22.901427] udev[44]: starting version 164
[ 23.201966] usbcore: registered new interface driver usbfs
[ 23.216994] usbcore: registered new interface driver hub
[ 23.230407] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 23.236275] usbcore: registered new device driver usb
[ 23.254913] mv643xx_eth smi: probed
[ 23.259008] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 23.275163] net eth0: port 0 with MAC address f0:ad:4e:00:01:36
[ 23.282313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.288930] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 23.296783] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 23.331036] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 23.343866] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 23.352717] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 23.358718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 23.365580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.372847] usb usb1: Product: Marvell Orion EHCI
[ 23.377571] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 23.383964] usb usb1: SerialNumber: orion-ehci.0
[ 23.388976] mmc0: new SDHC card at address 8682
[ 23.406934] mmcblk0: mmc0:8682 SD08G 7.40 GiB
[ 23.411608] mmcblk0:
[ 23.414336] usb usb1: configuration #1 chosen from 1 choice
[ 23.420217] p1 p2 p3 <
[ 23.422935] hub 1-0:1.0: USB hub found
[ 23.426944] p5 >
[ 23.429757] hub 1-0:1.0: 1 port detected
[ 23.860713] kjournald starting. Commit interval 5 seconds
[ 23.866294] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.649381] udev[147]: starting version 164
[ 26.960455] Adding 379896k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:379896k SS
[ 27.262116] EXT3 FS on mmcblk0p2, internal journal
[ 27.458467] loop: module loaded
[ 29.787396] ipv6: Unknown symbol sock_queue_err_skb
[ 29.871245] ipv6: Unknown symbol sock_queue_err_skb
[ 31.133684] eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 31.554510] ipv6: Unknown symbol sock_queue_err_skb
[ 33.565381] ipv6: Unknown symbol sock_queue_err_skb
[ 34.567621] ipv6: Unknown symbol sock_queue_err_skb
[ 34.970343] ipv6: Unknown symbol sock_queue_err_skb
[ 36.942648] ipv6: Unknown symbol sock_queue_err_skb
[ 37.241715] ipv6: Unknown symbol sock_queue_err_skb
[ 37.885348] ipv6: Unknown symbol sock_queue_err_skb
[ 38.659318] ipv6: Unknown symbol sock_queue_err_skb
[ 39.142489] ipv6: Unknown symbol sock_queue_err_skb
[ 39.942600] ipv6: Unknown symbol sock_queue_err_skb
[ 45.903771] ipv6: Unknown symbol sock_queue_err_skb
[ 45.993334] ipv6: Unknown symbol sock_queue_err_skb
[ 621.140131] ipv6: Unknown symbol sock_queue_err_skb
[ 1753.008361] ipv6: Unknown symbol sock_queue_err_skb
[ 1758.868273] ipv6: Unknown symbol sock_queue_err_skb
[ 1758.957934] ipv6: Unknown symbol sock_queue_err_skb
[ 1759.047367] ipv6: Unknown symbol sock_queue_err_skb
[ 1790.886854] ipv6: Unknown symbol sock_queue_err_skb
[ 1790.976366] ipv6: Unknown symbol sock_queue_err_skb
[ 1791.355674] ipv6: Unknown symbol sock_queue_err_skb
[ 1791.444993] ipv6: Unknown symbol sock_queue_err_skb
[ 1792.370556] ipv6: Unknown symbol sock_queue_err_skb
[ 1792.459731] ipv6: Unknown symbol sock_queue_err_skb
[ 2171.002313] ipv6: Unknown symbol sock_queue_err_skb
[ 2171.091770] ipv6: Unknown symbol sock_queue_err_skb
[ 2171.444601] ipv6: Unknown symbol sock_queue_err_skb
[ 2171.534212] ipv6: Unknown symbol sock_queue_err_skb
[ 2172.587046] ipv6: Unknown symbol sock_queue_err_skb
[ 2172.677477] ipv6: Unknown symbol sock_queue_err_skb
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : Marvell SheevaPlug Reference Board
Revision : 0000
** Loaded modules:
Module Size Used by
ext2 55323 1
loop 11427 0
hmac 2475 0
sha1_generic 1717 0
mv_cesa 9262 0
aes_generic 32820 1 mv_cesa
ext3 110992 1
jbd 37434 1 ext3
mbcache 4860 2 ext2,ext3
mmc_block 7658 4
ehci_hcd 35579 0
mvsdio 5318 0
mv643xx_eth 22562 0
usbcore 122183 2 ehci_hcd
libphy 14836 1 mv643xx_eth
mmc_core 50206 2 mmc_block,mvsdio
nls_base 5367 1 usbcore
inet_lro 5060 1 mv643xx_eth
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15) (ignored: LC_ALL set to de_DE@euro)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
Reply to: