[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#507635: marked as done (linux-image-2.6.24-etchnhalf.1-486: psmouse.c lost synchronization)



Your message dated Tue, 15 May 2012 14:00:12 -0500
with message-id <20120515190012.GA6784@burratino>
and subject line Re: [etchnhalf] psmouse.c lost synchronization
has caused the Debian Bug report #507635,
regarding linux-image-2.6.24-etchnhalf.1-486: psmouse.c lost synchronization
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
507635: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507635
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-etchnhalf.1-486
Version: 2.6.24-6~etchnhalf.4
Severity: important



-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-486 (Debian 2.6.24-6~etchnhalf.4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Mon Jul 21 10:36:16 UTC 2008

** Command line:
root=/dev/hda1 ro 

** Tainted: P (1)

** Kernel log:
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
parport_pc 00:0a: disabled
/dev/vmmon[9028]: VMCI: Driver initialized.
/dev/vmmon[9028]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9028]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
/dev/vmmon[9028]: Module vmmon: initialized
/dev/vmmon[9031]: Module vmmon: unloaded
/dev/vmmon[9687]: VMCI: Driver initialized.
/dev/vmmon[9687]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9687]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
/dev/vmmon[9687]: Module vmmon: initialized
parport_pc 00:0a: activated
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
/dev/vmnet: open called by PID 9741 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 9756 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9766 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9771 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9778 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9796 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
/dev/vmnet: open called by PID 9853 (vmware-vmx)
device eth0 entered promiscuous mode
audit(1228251491.963:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
bridge-eth0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
/dev/vmmon[9860]: host clock rate change request 0 -> 19
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 0
/dev/vmmon[9860]: host clock rate change request 19 -> 0
/dev/vmmon[9860]: host clock rate change request 0 -> 250
/dev/vmmon[9860]: host clock rate change request 250 -> 500
/dev/vmmon[9860]: host clock rate change request 500 -> 501
/dev/vmmon[9860]: host clock rate change request 501 -> 500
psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.

** Loaded modules:
Module                  Size  Used by
vmnet                  38708  15 
parport_pc             26148  0 
parport                33352  1 parport_pc
vmblock                14108  3 
vmmon                 929484  6 
nvidia               4711408  22 
binfmt_misc            10760  1 
ac                      6148  0 
battery                13700  0 
ipv6                  230372  32 
quota_v1                3072  2 
dm_snapshot            16928  0 
dm_mirror              20608  0 
dm_mod                 54724  2 dm_snapshot,dm_mirror
loop                   16260  0 
snd_intel8x0           31516  4 
snd_ac97_codec         92964  1 snd_intel8x0
ac97_bus                2176  1 snd_ac97_codec
snd_pcm_oss            37792  0 
snd_mixer_oss          15232  1 snd_pcm_oss
snd_pcm                69640  4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
floppy                 54276  1 
serio_raw               6660  0 
snd_seq_dummy           3844  0 
psmouse                36368  0 
pcspkr                  3072  0 
rtc                    12828  1 
snd_seq_oss            29184  0 
snd_seq_midi            8224  0 
snd_rawmidi            22688  1 snd_seq_midi
snd_seq_midi_event      7040  2 snd_seq_oss,snd_seq_midi
snd_seq                45520  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              20868  3 snd_pcm,snd_seq
snd_seq_device          7948  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    47588  16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               7264  1 snd
snd_page_alloc         10120  2 snd_intel8x0,snd_pcm
button                  8464  0 
i2c_sis96x              5124  0 
i2c_core               22416  2 nvidia,i2c_sis96x
shpchp                 30996  0 
pci_hotplug            27552  1 shpchp
sis_agp                 9092  1 
agpgart                31280  2 nvidia,sis_agp
evdev                  10880  1 
ext3                  120712  1 
jbd                    39700  1 ext3
ide_cd                 36256  0 
cdrom                  32672  1 ide_cd
ide_disk               15488  3 
ata_generic             7556  0 
pata_sis               13956  0 
libata                145136  2 ata_generic,pata_sis
scsi_mod              141836  1 libata
via_rhine              23048  0 
sis900                 21248  0 
mii                     5248  2 via_rhine,sis900
ehci_hcd               32140  0 
ohci_hcd               21892  0 
usbcore               126316  3 ehci_hcd,ohci_hcd
sis5513                 7684  0 [permanent]
generic                 4484  0 [permanent]
ide_core              107224  4 ide_cd,ide_disk,sis5513,generic
thermal                16028  0 
processor              28720  1 thermal
fan                     4868  0 

** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 746 Host [1039:0746] (rev 02)
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
	Capabilities: [c0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
	Memory behind bridge: cdd00000-cfefffff
	Prefetchable memory behind bridge: c5a00000-cdbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] [1039:0963] (rev 25)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 0c00 [size=32]

00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (prog-if 80 [Master])
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at ff00 [size=16]

00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (13000ns min, 2750ns max)
	Interrupt: pin C routed to IRQ 20
	Region 0: I/O ports at dc00 [size=256]
	Region 1: I/O ports at d800 [size=128]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max)
	Interrupt: pin D routed to IRQ 18
	Region 0: Memory at cffdf000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
	Subsystem: Elitegroup Computer Systems Unknown device [1019:1808]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (13000ns min, 2750ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at cffdc000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at cffa0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105 [Rhine-III] [1106:3106] (rev 8b)
	Subsystem: VIA Technologies, Inc. Unknown device [1106:0106]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at d000 [size=256]
	Region 1: Memory at cfffdf00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] [10de:0181] (rev a4) (prog-if 00 [VGA])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c8000000 (32-bit, prefetchable) [size=64M]
	[virtual] Expansion ROM at cfee0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8



-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages linux-image-2.6.24-etchnhalf.1-486 depends on:
ii  debconf [debconf-2.0]        1.5.11etch2 Debian configuration management sy
ii  initramfs-tools [linux-initr 0.85i       tools for generating an initramfs
ii  module-init-tools            3.3-pre4-2  tools for managing Linux kernel mo

linux-image-2.6.24-etchnhalf.1-486 recommends no packages.

-- debconf information:
  linux-image-2.6.24-etchnhalf.1-486/preinst/abort-overwrite-2.6.24-etchnhalf.1-486:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/depmod-error-2.6.24-etchnhalf.1-486: false
  linux-image-2.6.24-etchnhalf.1-486/postinst/create-kimage-link-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/kimage-is-a-directory:
  linux-image-2.6.24-etchnhalf.1-486/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/old-initrd-link-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/prerm/removing-running-kernel-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/bootloader-test-error-2.6.24-etchnhalf.1-486:
  linux-image-2.6.24-etchnhalf.1-486/preinst/overwriting-modules-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-etchnhalf.1-486/preinst/bootloader-initrd-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/old-system-map-link-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-486: false
  linux-image-2.6.24-etchnhalf.1-486/preinst/abort-install-2.6.24-etchnhalf.1-486:
  linux-image-2.6.24-etchnhalf.1-486/preinst/initrd-2.6.24-etchnhalf.1-486:
  linux-image-2.6.24-etchnhalf.1-486/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-486:
  linux-image-2.6.24-etchnhalf.1-486/postinst/bootloader-error-2.6.24-etchnhalf.1-486:
  linux-image-2.6.24-etchnhalf.1-486/preinst/elilo-initrd-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-486: true
  linux-image-2.6.24-etchnhalf.1-486/preinst/lilo-initrd-2.6.24-etchnhalf.1-486: true


psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.

My mouse going crazy.



--- End Message ---
--- Begin Message ---
Jonathan Nieder wrote:
> Four years ago, Hristofor Georgiev wrote:

>> psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
>> psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
> [...]
>> My mouse going crazy.
>
> Unfortunately we missed this before and then lost track of it.
>
> Now I'm curious:
>
>  * What happened?  Did you find a fix or workaround?
>  * do you still have access to that mouse?

Closing due to lack of response.  We'd be glad to revisit this
if it happens again, though.

Thanks,
Jonathan


--- End Message ---

Reply to: