Bug#672431: dmesg and additional info
On other my 7 servers - kernel 3.2.16-pae work normally.
Server, who hangs - diff from others servers. It is old and with
AMD Athlon(tm) XP 2600+ processor, motherboard is old too.
server revision in april 2012, power supply is clear, capasitors on
motherboard is good (two bad replaced in january 2012), three coolers
is clear, N-POWER UPS 3000 is always on.
server is works with 5 network cards, and 1 tv-tuner card with camera
on it (motion)
sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +50.5В°C (crit = +65.0В°C)
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.57 V (min = +1.44 V, max = +1.76 V)
VCore 2: +1.66 V (min = +1.44 V, max = +1.76 V)
+3.3V: +2.72 V (min = +2.64 V, max = +3.47 V)
+5V: +4.78 V (min = +4.49 V, max = +5.24 V)
+12V: +12.04 V (min = +10.82 V, max = +13.19 V)
-12V: -11.95 V (min = -13.18 V, max = -10.80 V)
-5V: -5.05 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.40 V (min = +4.49 V, max = +5.51 V)
VBat: +3.06 V (min = +2.40 V, max = +3.60 V)
fan1: 1917 RPM (min = 1493 RPM, div = 8)
fan3: 1875 RPM (min = 1493 RPM, div = 8)
temp2: +50.5В°C (high = +65.0В°C, hyst = +60.0В°C) sensor = thermistor
temp3: +40.5В°C (high = +65.0В°C, hyst = +60.0В°C) sensor = thermistor
cpu0_vid: +0.000 V
beep_enable: enabled
Petr mailto:unicorp99@hotbox.ru
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: /nVidia-nForce, BIOS 6.00 PG 07/29/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36b4c000 - 3759e000
[ 0.000000] ACPI: RSDP 000f7380 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff30c0 04B6D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: APIC 3fff7c40 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 133MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262016
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f634c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 268 pages used for memmap
[ 0.000000] HighMem zone: 34022 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7600000 s33024 r0 d24320 u2097152
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=75874df9-7771-4d96-9a75-c8eae74b5492 ro acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fff0)
[ 0.000000] Memory: 1023172k/1048512k available (2841k kernel code, 24892k reserved, 1372k data, 412k init, 137160k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c65ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c65ac (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1921.082 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3842.16 BogoMIPS (lpj=7684328)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004081] Security Framework initialized
[ 0.004094] AppArmor: AppArmor disabled by boot time parameter
[ 0.004120] Mount-cache hash table entries: 512
[ 0.004323] Initializing cgroup subsys cpuacct
[ 0.004335] Initializing cgroup subsys memory
[ 0.004352] Initializing cgroup subsys devices
[ 0.004359] Initializing cgroup subsys freezer
[ 0.004365] Initializing cgroup subsys net_cls
[ 0.004372] Initializing cgroup subsys blkio
[ 0.004385] Initializing cgroup subsys perf_event
[ 0.004429] mce: CPU supports 4 MCE banks
[ 0.004476] SMP alternatives: switching to UP code
[ 0.008622] Freeing SMP alternatives: 8k freed
[ 0.008635] ACPI: Core revision 20110623
[ 0.012127] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012589] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.054174] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (3842.16 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.056003] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16
[ 0.056003] ACPI: bus type pci registered
[ 0.085956] PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2
[ 0.085964] PCI: Using configuration type 1 for base access
[ 0.085996] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.086002] mtrr: probably your BIOS does not setup all CPUs.
[ 0.086008] mtrr: corrected configuration.
[ 0.086959] bio: create slab <bio-0> at 0
[ 0.087067] ACPI: Added _OSI(Module Device)
[ 0.087075] ACPI: Added _OSI(Processor Device)
[ 0.087081] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.087087] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088307] ACPI: EC: Look up EC in DSDT
[ 0.092671] ACPI: Interpreter enabled
[ 0.092682] ACPI: (supports S0 S1 S4 S5)
[ 0.092714] ACPI: Using IOAPIC for interrupt routing
[ 0.100102] ACPI: No dock devices found.
[ 0.100110] HEST: Table not found.
[ 0.100119] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.100369] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.100374] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.100379] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.100383] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.100387] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.100408] pci 0000:00:00.0: [10de:01e0] type 0 class 0x000600
[ 0.100418] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.100438] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[ 0.100477] pci 0000:00:00.1: [10de:01eb] type 0 class 0x000500
[ 0.100520] pci 0000:00:00.2: [10de:01ee] type 0 class 0x000500
[ 0.100561] pci 0000:00:00.3: [10de:01ed] type 0 class 0x000500
[ 0.100600] pci 0000:00:00.4: [10de:01ec] type 0 class 0x000500
[ 0.100641] pci 0000:00:00.5: [10de:01ef] type 0 class 0x000500
[ 0.100689] pci 0000:00:01.0: [10de:0060] type 0 class 0x000601
[ 0.100780] pci 0000:00:01.1: [10de:0064] type 0 class 0x000c05
[ 0.100796] pci 0000:00:01.1: reg 10: [io 0xc400-0xc41f]
[ 0.100859] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.100865] pci 0000:00:01.1: PME# disabled
[ 0.100890] pci 0000:00:02.0: [10de:0067] type 0 class 0x000c03
[ 0.100907] pci 0000:00:02.0: reg 10: [mem 0xdb004000-0xdb004fff]
[ 0.100968] pci 0000:00:02.0: supports D1 D2
[ 0.100972] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.100977] pci 0000:00:02.0: PME# disabled
[ 0.100996] pci 0000:00:02.1: [10de:0067] type 0 class 0x000c03
[ 0.101012] pci 0000:00:02.1: reg 10: [mem 0xdb005000-0xdb005fff]
[ 0.101074] pci 0000:00:02.1: supports D1 D2
[ 0.101077] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101082] pci 0000:00:02.1: PME# disabled
[ 0.101104] pci 0000:00:02.2: [10de:0068] type 0 class 0x000c03
[ 0.101123] pci 0000:00:02.2: reg 10: [mem 0xdb000000-0xdb0000ff]
[ 0.101195] pci 0000:00:02.2: supports D1 D2
[ 0.101199] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101204] pci 0000:00:02.2: PME# disabled
[ 0.101232] pci 0000:00:06.0: [10de:006a] type 0 class 0x000401
[ 0.101249] pci 0000:00:06.0: reg 10: [io 0xb400-0xb4ff]
[ 0.101259] pci 0000:00:06.0: reg 14: [io 0xb800-0xb87f]
[ 0.101269] pci 0000:00:06.0: reg 18: [mem 0xdb002000-0xdb002fff]
[ 0.101318] pci 0000:00:06.0: supports D1 D2
[ 0.101336] pci 0000:00:08.0: [10de:006c] type 1 class 0x000604
[ 0.101380] pci 0000:00:09.0: [10de:0065] type 0 class 0x000101
[ 0.101421] pci 0000:00:09.0: reg 20: [io 0xf000-0xf00f]
[ 0.101489] pci 0000:00:1e.0: [10de:01e8] type 1 class 0x000604
[ 0.101551] pci 0000:01:06.0: [10b7:9200] type 0 class 0x000200
[ 0.101573] pci 0000:01:06.0: reg 10: [io 0x9000-0x907f]
[ 0.101586] pci 0000:01:06.0: reg 14: [mem 0xd9108000-0xd910807f]
[ 0.101637] pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.101668] pci 0000:01:06.0: supports D1 D2
[ 0.101672] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101678] pci 0000:01:06.0: PME# disabled
[ 0.101706] pci 0000:01:07.0: [1186:4b01] type 0 class 0x000200
[ 0.101730] pci 0000:01:07.0: reg 10: [mem 0xd9100000-0xd9103fff]
[ 0.101744] pci 0000:01:07.0: reg 14: [io 0x9400-0x94ff]
[ 0.101794] pci 0000:01:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.101836] pci 0000:01:07.0: supports D1 D2
[ 0.101839] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101845] pci 0000:01:07.0: PME# disabled
[ 0.101869] pci 0000:01:08.0: [1131:7130] type 0 class 0x000480
[ 0.101891] pci 0000:01:08.0: reg 10: [mem 0xd910a000-0xd910a3ff]
[ 0.101978] pci 0000:01:08.0: supports D1 D2
[ 0.101998] pci 0000:01:09.0: [8086:1229] type 0 class 0x000200
[ 0.102016] pci 0000:01:09.0: reg 10: [mem 0xda000000-0xda000fff pref]
[ 0.102029] pci 0000:01:09.0: reg 14: [io 0x9800-0x981f]
[ 0.102042] pci 0000:01:09.0: reg 18: [mem 0xd9000000-0xd90fffff]
[ 0.102081] pci 0000:01:09.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.102111] pci 0000:01:0a.0: [1106:3106] type 0 class 0x000200
[ 0.102133] pci 0000:01:0a.0: reg 10: [io 0x9c00-0x9cff]
[ 0.102147] pci 0000:01:0a.0: reg 14: [mem 0xd9109000-0xd91090ff]
[ 0.102228] pci 0000:01:0a.0: supports D1 D2
[ 0.102231] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102237] pci 0000:01:0a.0: PME# disabled
[ 0.102264] pci 0000:01:0b.0: [1186:4b01] type 0 class 0x000200
[ 0.102288] pci 0000:01:0b.0: reg 10: [mem 0xd9104000-0xd9107fff]
[ 0.102301] pci 0000:01:0b.0: reg 14: [io 0xa000-0xa0ff]
[ 0.102352] pci 0000:01:0b.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.102393] pci 0000:01:0b.0: supports D1 D2
[ 0.102397] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102403] pci 0000:01:0b.0: PME# disabled
[ 0.102441] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.102450] pci 0000:00:08.0: bridge window [io 0x9000-0xafff]
[ 0.102456] pci 0000:00:08.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.102462] pci 0000:00:08.0: bridge window [mem 0xda000000-0xdaffffff pref]
[ 0.102506] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.102525] pci_bus 0000:00: on NUMA node 0
[ 0.102530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.102640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.102828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.102917] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.131791] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.131872] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.131951] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.132039] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.132116] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132196] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.132281] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.132357] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132434] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132518] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.132600] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132679] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132759] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.132840] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132919] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132997] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.133078] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 0.133140] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.133201] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.133262] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 0.133323] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.133419] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.133516] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.133612] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 0.133709] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.133806] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.133901] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.133966] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 0.134060] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.134156] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.134253] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.134351] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.134557] vgaarb: loaded
[ 0.134626] PCI: Using ACPI for IRQ routing
[ 0.134636] PCI: pci_cache_line_size set to 32 bytes
[ 0.134709] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.137327] pnp: PnP ACPI init
[ 0.137370] ACPI: bus type pnp registered
[ 0.137685] pnp 00:00: [io 0x4000-0x407f]
[ 0.137689] pnp 00:00: [io 0x4080-0x40ff]
[ 0.137693] pnp 00:00: [io 0x4400-0x447f]
[ 0.137697] pnp 00:00: [io 0x4480-0x44ff]
[ 0.137700] pnp 00:00: [io 0x4200-0x427f]
[ 0.137703] pnp 00:00: [io 0x4280-0x42ff]
[ 0.137801] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.137811] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.137819] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.137827] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.137835] system 00:00: [io 0x4200-0x427f] has been reserved
[ 0.137842] system 00:00: [io 0x4280-0x42ff] has been reserved
[ 0.137852] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137868] pnp 00:01: [io 0x5000-0x503f]
[ 0.137924] system 00:01: [io 0x5000-0x503f] has been reserved
[ 0.137933] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.138106] pnp 00:02: [mem 0x000c8800-0x000cbfff]
[ 0.138111] pnp 00:02: [mem 0x000f0000-0x000f7fff]
[ 0.138114] pnp 00:02: [mem 0x000f8000-0x000fbfff]
[ 0.138118] pnp 00:02: [mem 0x000fc000-0x000fffff]
[ 0.138122] pnp 00:02: [mem 0x3fff0000-0x3fffffff]
[ 0.138125] pnp 00:02: [mem 0xffff0000-0xffffffff]
[ 0.138129] pnp 00:02: [mem 0x00000000-0x0009ffff]
[ 0.138132] pnp 00:02: [mem 0x00100000-0x3ffeffff]
[ 0.138136] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.138139] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.138164] pnp 00:02: disabling [mem 0x000c8800-0x000cbfff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.138177] pnp 00:02: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.138189] pnp 00:02: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.138201] pnp 00:02: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.138213] pnp 00:02: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.138270] system 00:02: [mem 0x3fff0000-0x3fffffff] could not be reserved
[ 0.138279] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.138287] system 00:02: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.138296] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.138304] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.138313] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.138386] pnp 00:03: [bus 00-ff]
[ 0.138390] pnp 00:03: [io 0x0cf8-0x0cff]
[ 0.138394] pnp 00:03: [io 0x0000-0x0cf7 window]
[ 0.138398] pnp 00:03: [io 0x0d00-0xffff window]
[ 0.138402] pnp 00:03: [mem 0x000a0000-0x000bffff window]
[ 0.138406] pnp 00:03: [mem 0x000c0000-0x000dffff window]
[ 0.138409] pnp 00:03: [mem 0x40000000-0xfebfffff window]
[ 0.138505] pnp 00:03: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.139090] pnp 00:04: [io 0x0010-0x001f]
[ 0.139094] pnp 00:04: [io 0x0022-0x003f]
[ 0.139098] pnp 00:04: [io 0x0044-0x005f]
[ 0.139101] pnp 00:04: [io 0x0062-0x0063]
[ 0.139105] pnp 00:04: [io 0x0065-0x006f]
[ 0.139108] pnp 00:04: [io 0x0074-0x007f]
[ 0.139111] pnp 00:04: [io 0x0091-0x0093]
[ 0.139115] pnp 00:04: [io 0x00a2-0x00bf]
[ 0.139118] pnp 00:04: [io 0x00e0-0x00ef]
[ 0.139122] pnp 00:04: [io 0x0b78-0x0b7b]
[ 0.139125] pnp 00:04: [io 0x0f78-0x0f7b]
[ 0.139128] pnp 00:04: [io 0x0a78-0x0a7b]
[ 0.139132] pnp 00:04: [io 0x0e78-0x0e7b]
[ 0.139135] pnp 00:04: [io 0x0bbc-0x0bbf]
[ 0.139138] pnp 00:04: [io 0x0fbc-0x0fbf]
[ 0.139142] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.139145] pnp 00:04: [io 0x0294-0x0297]
[ 0.139149] pnp 00:04: [io 0x04e0-0x04e7]
[ 0.139238] system 00:04: [io 0x0b78-0x0b7b] has been reserved
[ 0.139249] system 00:04: [io 0x0f78-0x0f7b] has been reserved
[ 0.139258] system 00:04: [io 0x0a78-0x0a7b] has been reserved
[ 0.139265] system 00:04: [io 0x0e78-0x0e7b] has been reserved
[ 0.139273] system 00:04: [io 0x0bbc-0x0bbf] has been reserved
[ 0.139281] system 00:04: [io 0x0fbc-0x0fbf] has been reserved
[ 0.139288] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.139296] system 00:04: [io 0x0294-0x0297] has been reserved
[ 0.139303] system 00:04: [io 0x04e0-0x04e7] has been reserved
[ 0.139312] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139331] pnp 00:05: [dma 4]
[ 0.139335] pnp 00:05: [io 0x0000-0x000f]
[ 0.139338] pnp 00:05: [io 0x0080-0x0090]
[ 0.139342] pnp 00:05: [io 0x0094-0x009f]
[ 0.139345] pnp 00:05: [io 0x00c0-0x00df]
[ 0.139403] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.139421] pnp 00:06: [io 0x0070-0x0073]
[ 0.139438] pnp 00:06: [irq 8]
[ 0.139494] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.139509] pnp 00:07: [io 0x0061]
[ 0.139564] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.139579] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.139587] pnp 00:08: [irq 13]
[ 0.139645] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.139791] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.139796] pnp 00:09: [io 0x03f7]
[ 0.139803] pnp 00:09: [irq 6]
[ 0.139807] pnp 00:09: [dma 2]
[ 0.139883] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.140120] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.140128] pnp 00:0a: [irq 4]
[ 0.140239] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.140469] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.140477] pnp 00:0b: [irq 3]
[ 0.140567] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.140944] pnp 00:0c: [io 0x0378-0x037f]
[ 0.140948] pnp 00:0c: [io 0x0778-0x077b]
[ 0.140956] pnp 00:0c: [irq 7]
[ 0.141049] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.141372] pnp 00:0d: [io 0x0200-0x0207]
[ 0.141441] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.141662] pnp 00:0e: [io 0x0330-0x0331]
[ 0.141670] pnp 00:0e: [irq 10]
[ 0.141755] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.141768] pnp: PnP ACPI: found 15 devices
[ 0.141776] ACPI: ACPI bus type pnp unregistered
[ 0.141784] PnPBIOS: Disabled by ACPI PNP
[ 0.179356] Switching to clocksource acpi_pm
[ 0.179391] PCI: max bus depth: 1 pci_try_num: 2
[ 0.179425] pci 0000:01:09.0: BAR 6: assigned [mem 0xda100000-0xda1fffff pref]
[ 0.179437] pci 0000:01:06.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
[ 0.179447] pci 0000:01:07.0: BAR 6: assigned [mem 0xda040000-0xda05ffff pref]
[ 0.179457] pci 0000:01:0b.0: BAR 6: assigned [mem 0xda060000-0xda07ffff pref]
[ 0.179466] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.179474] pci 0000:00:08.0: bridge window [io 0x9000-0xafff]
[ 0.179484] pci 0000:00:08.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.179494] pci 0000:00:08.0: bridge window [mem 0xda000000-0xdaffffff pref]
[ 0.179506] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.179528] pci 0000:00:08.0: setting latency timer to 64
[ 0.179537] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.179541] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[ 0.179545] pci_bus 0000:01: resource 0 [io 0x9000-0xafff]
[ 0.179549] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 0.179553] pci_bus 0000:01: resource 2 [mem 0xda000000-0xdaffffff pref]
[ 0.179628] NET: Registered protocol family 2
[ 0.179725] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.179725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.179725] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.179725] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.179725] TCP reno registered
[ 0.179725] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179725] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179725] NET: Registered protocol family 1
[ 0.179725] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 0.179725] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22
[ 0.179729] pci 0000:00:02.0: PCI INT A disabled
[ 0.179880] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 0.179896] pci 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
[ 0.179920] pci 0000:00:02.1: PCI INT B disabled
[ 0.180110] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 0.180125] pci 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
[ 0.180150] pci 0000:00:02.2: PCI INT C disabled
[ 0.180192] pci 0000:01:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.180210] PCI: CLS 32 bytes, default 32
[ 0.180308] Unpacking initramfs...
[ 0.547354] Freeing initrd memory: 10568k freed
[ 0.560577] audit: initializing netlink socket (disabled)
[ 0.560610] type=2000 audit(1336693618.560:1): initialized
[ 0.584524] highmem bounce pool size: 64 pages
[ 0.584543] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.595394] VFS: Disk quotas dquot_6.5.2
[ 0.595453] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.595554] msgmni has been set to 1751
[ 0.595784] alg: No test for stdrng (krng)
[ 0.595829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.595840] io scheduler noop registered
[ 0.595845] io scheduler deadline registered
[ 0.595859] io scheduler cfq registered (default)
[ 0.596062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.596108] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.596115] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.596732] ERST: Table is not found!
[ 0.596739] GHES: HEST is not enabled!
[ 0.596761] isapnp: Scanning for PnP cards...
[ 0.951312] isapnp: No Plug & Play device found
[ 0.951407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.971867] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992337] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.013114] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.033632] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.033916] Linux agpgart interface v0.103
[ 1.034065] agpgart: Detected NVIDIA nForce2 chipset
[ 1.042234] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 1.042472] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.292322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.292491] mousedev: PS/2 mouse device common for all mice
[ 1.292571] rtc_cmos 00:06: RTC can wake from S4
[ 1.292715] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.292749] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.292770] cpuidle: using governor ladder
[ 1.292776] cpuidle: using governor menu
[ 1.293128] TCP cubic registered
[ 1.293165] NET: Registered protocol family 10
[ 1.293974] Mobile IPv6
[ 1.293983] NET: Registered protocol family 17
[ 1.293992] Registering the dns_resolver key type
[ 1.294022] Using IPI No-Shortcut mode
[ 1.294169] PM: Hibernation image not present or could not be loaded.
[ 1.294185] registered taskstats version 1
[ 1.299902] rtc_cmos 00:06: setting system clock to 2012-05-10 23:46:59 UTC (1336693619)
[ 1.299970] Initializing network drop monitor service
[ 1.300147] Freeing unused kernel memory: 412k freed
[ 1.300623] Write protecting the kernel text: 2844k
[ 1.300672] Write protecting the kernel read-only data: 1112k
[ 1.328311] udevd[44]: starting version 175
[ 1.450827] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.450844] ACPI: Thermal Zone [THRM] (53 C)
[ 1.466155] Floppy drive(s): fd0 is 1.44M
[ 1.490690] ACPI: Fan [FAN] (on)
[ 1.505738] FDC 0 is a post-1991 82077
[ 1.512828] usbcore: registered new interface driver usbfs
[ 1.512885] usbcore: registered new interface driver hub
[ 1.527611] usbcore: registered new device driver usb
[ 1.528451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.528502] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
[ 1.528536] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 1.528542] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 1.528591] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.528642] ehci_hcd 0000:00:02.2: debug port 1
[ 1.528652] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
[ 1.528663] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
[ 1.528691] ehci_hcd 0000:00:02.2: irq 20, io mem 0xdb000000
[ 1.534004] SCSI subsystem initialized
[ 1.544052] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 1.544113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.544121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.544130] usb usb1: Product: EHCI Host Controller
[ 1.544137] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.544143] usb usb1: SerialNumber: 0000:00:02.2
[ 1.544354] hub 1-0:1.0: USB hub found
[ 1.544367] hub 1-0:1.0: 6 ports detected
[ 1.545055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.545098] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22
[ 1.545135] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.545140] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.545158] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.545208] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdb004000
[ 1.576069] Refined TSC clocksource calibration: 1921.022 MHz.
[ 1.576091] Switching to clocksource tsc
[ 1.591573] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.591609] 3c59x 0000:01:06.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[ 1.591634] 3c59x: Donald Becker and others.
[ 1.591652] 0000:01:06.0: 3Com PCI 3c905C Tornado at f821c000.
[ 1.615312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.615321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.615330] usb usb2: Product: OHCI Host Controller
[ 1.615336] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.615343] usb usb2: SerialNumber: 0000:00:02.0
[ 1.622164] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 1.622182] via_rhine: Broken BIOS detected, avoid_D3 enabled
[ 1.631626] libata version 3.00 loaded.
[ 1.633337] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.633354] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.667226] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.667262] skge 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[ 1.667336] skge: 1.14 addr 0xd9100000 irq 19 chip Yukon-Lite rev 9
[ 1.668203] skge 0000:01:07.0: eth1: addr 00:17:9a:b3:95:8d
[ 1.668236] via-rhine 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[ 1.677939] hub 2-0:1.0: USB hub found
[ 1.677963] hub 2-0:1.0: 3 ports detected
[ 1.678081] pata_amd 0000:00:09.0: version 0.4.1
[ 1.678174] pata_amd 0000:00:09.0: setting latency timer to 64
[ 1.682962] via-rhine 0000:01:0a.0: eth2: VIA Rhine III at 0x19c00, 00:24:01:05:b1:ee, IRQ 18
[ 1.683708] via-rhine 0000:01:0a.0: eth2: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
[ 1.684184] scsi0 : pata_amd
[ 1.687239] scsi1 : pata_amd
[ 1.688002] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.688061] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.688181] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
[ 1.688224] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.688230] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 1.688251] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 1.688303] ohci_hcd 0000:00:02.1: irq 21, io mem 0xdb005000
[ 1.689900] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.689934] e100 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
[ 1.711800] e100 0000:01:09.0: eth3: addr 0xda000000, irq 17, MAC addr 00:60:94:a5:1e:df
[ 1.711836] skge 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[ 1.711889] skge: 1.14 addr 0xd9104000 irq 19 chip Yukon-Lite rev 9
[ 1.712904] skge 0000:01:0b.0: eth4: addr 00:1c:f0:98:37:c3
[ 1.746039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.746056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.746065] usb usb3: Product: OHCI Host Controller
[ 1.746071] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.746078] usb usb3: SerialNumber: 0000:00:02.1
[ 1.747265] hub 3-0:1.0: USB hub found
[ 1.747285] hub 3-0:1.0: 3 ports detected
[ 1.880537] ata1.00: ATA-6: ST320410A, 3.34, max UDMA/100
[ 1.880554] ata1.00: 39102336 sectors, multi 16: LBA
[ 1.880569] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[ 1.896456] ata1.00: configured for UDMA/100
[ 1.896641] scsi 0:0:0:0: Direct-Access ATA ST320410A 3.34 PQ: 0 ANSI: 5
[ 2.077385] sd 0:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 2.077480] sd 0:0:0:0: [sda] Write Protect is off
[ 2.077488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.077524] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.104838] sda: sda1 sda2 sda3
[ 2.105457] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.557155] md: linear personality registered for level -1
[ 2.560000] md: multipath personality registered for level -4
[ 2.562923] md: raid0 personality registered for level 0
[ 2.566257] md: raid1 personality registered for level 1
[ 2.636070] raid6: int32x1 688 MB/s
[ 2.704102] raid6: int32x2 617 MB/s
[ 2.772029] raid6: int32x4 632 MB/s
[ 2.840087] raid6: int32x8 508 MB/s
[ 2.908037] raid6: mmxx1 1617 MB/s
[ 2.976028] raid6: mmxx2 2671 MB/s
[ 3.044033] raid6: sse1x1 1485 MB/s
[ 3.112013] raid6: sse1x2 2474 MB/s
[ 3.112019] raid6: using algorithm sse1x2 (2474 MB/s)
[ 3.112602] async_tx: api initialized (async)
[ 3.113157] xor: automatically using best checksumming function: pIII_sse
[ 3.132006] pIII_sse : 5108.000 MB/sec
[ 3.132013] xor: using function: pIII_sse (5108.000 MB/sec)
[ 3.135228] md: raid6 personality registered for level 6
[ 3.135245] md: raid5 personality registered for level 5
[ 3.135251] md: raid4 personality registered for level 4
[ 3.150807] md: raid10 personality registered for level 10
[ 3.155059] mdadm: sending ioctl 800c0910 to a partition!
[ 3.155077] mdadm: sending ioctl 800c0910 to a partition!
[ 3.155095] mdadm: sending ioctl 1261 to a partition!
[ 3.155102] mdadm: sending ioctl 1261 to a partition!
[ 3.155445] mdadm: sending ioctl 1261 to a partition!
[ 3.155453] mdadm: sending ioctl 1261 to a partition!
[ 3.155606] mdadm: sending ioctl 1261 to a partition!
[ 3.155613] mdadm: sending ioctl 1261 to a partition!
[ 3.155795] mdadm: sending ioctl 1261 to a partition!
[ 3.155802] mdadm: sending ioctl 1261 to a partition!
[ 3.280107] PM: Starting manual resume from disk
[ 3.280125] PM: Hibernation image partition 8:2 present
[ 3.280128] PM: Looking for hibernation image.
[ 3.280478] PM: Image not found (code -22)
[ 3.280481] PM: Hibernation image not present or could not be loaded.
[ 3.308055] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.308073] EXT4-fs (sda1): write access will be enabled during recovery
[ 13.656969] EXT4-fs (sda1): recovery complete
[ 13.657760] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 27.087524] udevd[327]: starting version 175
[ 27.593606] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 27.593630] ACPI: Power Button [PWRB]
[ 27.593774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 27.593785] ACPI: Power Button [PWRF]
[ 27.660646] parport_pc 00:0c: reported by Plug and Play ACPI
[ 27.660722] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 27.779469] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.822719] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 59659kHz
[ 27.957516] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 28.089377] udevd[378]: renamed network interface eth0 to rename2
[ 28.090687] udevd[386]: renamed network interface eth2 to rename4
[ 28.092696] udevd[387]: renamed network interface eth4 to rename6
[ 28.103604] udevd[385]: renamed network interface eth3 to eth0
[ 28.140450] udevd[378]: renamed network interface rename2 to eth2
[ 28.141666] udevd[386]: renamed network interface rename4 to eth4
[ 28.143829] udevd[387]: renamed network interface rename6 to eth3
[ 28.217115] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[ 28.217170] i2c i2c-1: nForce2 SMBus adapter at 0x5040
[ 28.235743] Linux media interface: v0.10
[ 28.262714] Linux video capture interface: v2.00
[ 28.343783] IR NEC protocol handler initialized
[ 28.378167] IR RC5(x) protocol handler initialized
[ 28.416787] IR RC6 protocol handler initialized
[ 28.574666] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 28.574907] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 28.574937] saa7134 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
[ 28.574952] saa7130[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xd910a000
[ 28.574967] saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected]
[ 28.574999] saa7130[0]: board init: gpio is 39000
[ 28.575006] saa7130[0]: there are different flyvideo cards with different tuners
[ 28.575008] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[ 28.575010] saa7130[0]: option to override the default value.
[ 28.601784] IR JVC protocol handler initialized
[ 28.685478] IR Sony protocol handler initialized
[ 28.708018] Registered IR keymap rc-flyvideo
[ 28.708198] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0/input3
[ 28.708432] rc0: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0
[ 28.763473] IR MCE Keyboard/mouse protocol handler initialized
[ 28.786797] lirc_dev: IR Remote Control driver registered, major 251
[ 28.787890] IR LIRC bridge handler initialized
[ 28.860015] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 28.860046] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860067] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860088] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860109] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860129] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860150] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860171] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860191] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860212] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860232] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860253] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860274] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860295] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860315] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.860336] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 28.945053] i2c-core: driver [tuner] using legacy suspend method
[ 28.945070] i2c-core: driver [tuner] using legacy resume method
[ 28.952076] tuner 2-0061: Tuner -1 found with type(s) Radio TV.
[ 29.019295] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 29.019318] snd_intel8x0 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, high) -> IRQ 22
[ 29.019368] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 29.132012] tuner-simple 2-0061: creating new instance
[ 29.132030] tuner-simple 2-0061: type set to 37 (LG PAL (newer TAPC series))
[ 29.160146] saa7130[0]: registered device video0 [v4l2]
[ 29.160332] saa7130[0]: registered device vbi0
[ 29.160441] saa7130[0]: registered device radio0
[ 29.344020] intel8x0_measure_ac97_clock: measured 55775 usecs (2704 samples)
[ 29.344036] intel8x0: clocking to 48000
[ 30.193176] Adding 249000k swap on /dev/sda2. Priority:-1 extents:1 across:249000k
[ 30.224851] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 30.450092] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 30.683901] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 30.806018] bttv: driver version 0.9.19 loaded
[ 30.806035] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 31.088452] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 31.088507] ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
[ 31.088517] ACPI: This conflict may cause random problems and system instability
[ 31.088525] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 31.114405] cpufreq-nforce2: Detected nForce2 chipset revision C1
[ 31.114421] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
[ 31.114441] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.5
[ 31.114477] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 31.170450] scsi_verify_blk_ioctl: 32 callbacks suppressed
[ 31.170467] mdadm: sending ioctl 800c0910 to a partition!
[ 31.170475] mdadm: sending ioctl 800c0910 to a partition!
[ 31.170492] mdadm: sending ioctl 1261 to a partition!
[ 31.170499] mdadm: sending ioctl 1261 to a partition!
[ 31.193107] mdadm: sending ioctl 1261 to a partition!
[ 31.193115] mdadm: sending ioctl 1261 to a partition!
[ 31.197740] mdadm: sending ioctl 1261 to a partition!
[ 31.197747] mdadm: sending ioctl 1261 to a partition!
[ 31.216245] mdadm: sending ioctl 1261 to a partition!
[ 31.216253] mdadm: sending ioctl 1261 to a partition!
[ 32.984129] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 33.726031] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.728298] e100 0000:01:09.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 33.728712] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.868671] skge 0000:01:07.0: eth1: enabling interface
[ 34.030760] eth2: setting full-duplex.
[ 34.181303] skge 0000:01:0b.0: eth3: enabling interface
[ 34.316986] via-rhine 0000:01:0a.0: eth4: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 34.584592] PPP generic driver version 2.4.2
[ 35.037220] NET: Registered protocol family 24
[ 35.451184] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.705011] nf_conntrack version 0.5.0 (16158 buckets, 64632 max)
[ 36.213935] skge 0000:01:07.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
[ 36.358363] fuse init (API version 7.17)
[ 36.563216] skge 0000:01:0b.0: eth3: Link is up at 1000 Mbps, full duplex, flow control none
[ 36.613801] NET: Registered protocol family 15
[ 36.658319] alg: No test for cipher_null (cipher_null-generic)
[ 36.658384] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 36.658421] alg: No test for digest_null (digest_null-generic)
[ 36.658457] alg: No test for compress_null (compress_null-generic)
[ 36.724776] padlock_sha: VIA PadLock Hash Engine not detected.
[ 36.747562] padlock_sha: VIA PadLock Hash Engine not detected.
[ 36.886990] Intel AES-NI instructions are not detected.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.5-030305-generic-pae (apw@gomeisa) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #201205071254 SMP Mon May 7 17:09:44 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: /nVidia-nForce, BIOS 6.00 PG 07/29/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 36a44000 - 3751a000
[ 0.000000] ACPI: RSDP 000f7380 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff30c0 04B6D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: APIC 3fff7c40 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 131MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262016
[ 0.000000] free_area_init_node: node 0, pgdat c1865080, node_mem_map f6244200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 264 pages used for memmap
[ 0.000000] HighMem zone: 33514 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s33472 r0 d23872 u2097152
[ 0.000000] pcpu-alloc: s33472 r0 d23872 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.5-030305-generic-pae root=UUID=75874df9-7771-4d96-9a75-c8eae74b5492 ro acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0)
[ 0.000000] Memory: 1015492k/1048512k available (5813k kernel code, 32572k reserved, 2827k data, 740k init, 135112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1871000 - 0xc192a000 ( 740 kB)
[ 0.000000] .data : 0xc15ad6b1 - 0xc1870300 (2827 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15ad6b1 (5813 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1920.962 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3841.92 BogoMIPS (lpj=7683848)
[ 0.004020] pid_max: default: 32768 minimum: 301
[ 0.004062] Security Framework initialized
[ 0.004102] AppArmor: AppArmor initialized
[ 0.004185] Mount-cache hash table entries: 512
[ 0.004396] Initializing cgroup subsys cpuacct
[ 0.004406] Initializing cgroup subsys memory
[ 0.004423] Initializing cgroup subsys devices
[ 0.004432] Initializing cgroup subsys freezer
[ 0.004440] Initializing cgroup subsys blkio
[ 0.004455] Initializing cgroup subsys perf_event
[ 0.004492] mce: CPU supports 4 MCE banks
[ 0.004578] SMP alternatives: switching to UP code
[ 0.017557] Freeing SMP alternatives: 24k freed
[ 0.017603] ACPI: Core revision 20120111
[ 0.024052] ftrace: allocating 24741 entries in 49 pages
[ 0.036126] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036592] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.077290] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 0.080004] Performance Events: AMD PMU driver.
[ 0.080004] ... version: 0
[ 0.080004] ... bit width: 48
[ 0.080004] ... generic registers: 4
[ 0.080004] ... value mask: 0000ffffffffffff
[ 0.080004] ... max period: 00007fffffffffff
[ 0.080004] ... fixed-purpose events: 0
[ 0.080004] ... event mask: 000000000000000f
[ 0.080004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080004] Brought up 1 CPUs
[ 0.080004] Total of 1 processors activated (3841.92 BogoMIPS).
[ 0.080004] devtmpfs: initialized
[ 0.080004] EVM: security.selinux
[ 0.080004] EVM: security.SMACK64
[ 0.080004] EVM: security.capability
[ 0.080004] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
[ 0.080004] print_constraints: dummy:
[ 0.080004] RTC time: 23:52:37, date: 05/10/12
[ 0.080004] NET: Registered protocol family 16
[ 0.080004] EISA bus registered
[ 0.080004] ACPI: bus type pci registered
[ 0.111466] PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2
[ 0.111474] PCI: Using configuration type 1 for base access
[ 0.111521] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.111528] mtrr: probably your BIOS does not setup all CPUs.
[ 0.111533] mtrr: corrected configuration.
[ 0.113157] bio: create slab <bio-0> at 0
[ 0.113297] ACPI: Added _OSI(Module Device)
[ 0.113304] ACPI: Added _OSI(Processor Device)
[ 0.113310] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.114411] ACPI: EC: Look up EC in DSDT
[ 0.118957] ACPI: Interpreter enabled
[ 0.118968] ACPI: (supports S0 S1 S4 S5)
[ 0.119000] ACPI: Using IOAPIC for interrupt routing
[ 0.126087] ACPI: No dock devices found.
[ 0.126099] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.126193] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.126309] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.126314] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.126318] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.126322] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.126326] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.126330] PCI: root bus 00: using default resources
[ 0.126382] PCI host bridge to bus 0000:00
[ 0.126389] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.126396] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff]
[ 0.126418] pci 0000:00:00.0: [10de:01e0] type 0 class 0x000600
[ 0.126428] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.126448] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[ 0.126485] pci 0000:00:00.1: [10de:01eb] type 0 class 0x000500
[ 0.126525] pci 0000:00:00.2: [10de:01ee] type 0 class 0x000500
[ 0.126565] pci 0000:00:00.3: [10de:01ed] type 0 class 0x000500
[ 0.126601] pci 0000:00:00.4: [10de:01ec] type 0 class 0x000500
[ 0.126643] pci 0000:00:00.5: [10de:01ef] type 0 class 0x000500
[ 0.126689] pci 0000:00:01.0: [10de:0060] type 0 class 0x000601
[ 0.126778] pci 0000:00:01.1: [10de:0064] type 0 class 0x000c05
[ 0.126794] pci 0000:00:01.1: reg 10: [io 0xc400-0xc41f]
[ 0.126856] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.126882] pci 0000:00:02.0: [10de:0067] type 0 class 0x000c03
[ 0.126898] pci 0000:00:02.0: reg 10: [mem 0xdb004000-0xdb004fff]
[ 0.126958] pci 0000:00:02.0: supports D1 D2
[ 0.126961] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126982] pci 0000:00:02.1: [10de:0067] type 0 class 0x000c03
[ 0.126997] pci 0000:00:02.1: reg 10: [mem 0xdb005000-0xdb005fff]
[ 0.127058] pci 0000:00:02.1: supports D1 D2
[ 0.127061] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127083] pci 0000:00:02.2: [10de:0068] type 0 class 0x000c03
[ 0.127100] pci 0000:00:02.2: reg 10: [mem 0xdb000000-0xdb0000ff]
[ 0.127172] pci 0000:00:02.2: supports D1 D2
[ 0.127175] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127205] pci 0000:00:06.0: [10de:006a] type 0 class 0x000401
[ 0.127220] pci 0000:00:06.0: reg 10: [io 0xb400-0xb4ff]
[ 0.127230] pci 0000:00:06.0: reg 14: [io 0xb800-0xb87f]
[ 0.127239] pci 0000:00:06.0: reg 18: [mem 0xdb002000-0xdb002fff]
[ 0.127287] pci 0000:00:06.0: supports D1 D2
[ 0.127304] pci 0000:00:08.0: [10de:006c] type 1 class 0x000604
[ 0.127348] pci 0000:00:09.0: [10de:0065] type 0 class 0x000101
[ 0.127388] pci 0000:00:09.0: reg 20: [io 0xf000-0xf00f]
[ 0.127455] pci 0000:00:1e.0: [10de:01e8] type 1 class 0x000604
[ 0.127516] pci 0000:01:06.0: [10b7:9200] type 0 class 0x000200
[ 0.127537] pci 0000:01:06.0: reg 10: [io 0x9000-0x907f]
[ 0.127550] pci 0000:01:06.0: reg 14: [mem 0xd9108000-0xd910807f]
[ 0.127600] pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.127631] pci 0000:01:06.0: supports D1 D2
[ 0.127634] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127662] pci 0000:01:07.0: [1186:4b01] type 0 class 0x000200
[ 0.127685] pci 0000:01:07.0: reg 10: [mem 0xd9100000-0xd9103fff]
[ 0.127698] pci 0000:01:07.0: reg 14: [io 0x9400-0x94ff]
[ 0.127747] pci 0000:01:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.127789] pci 0000:01:07.0: supports D1 D2
[ 0.127791] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127818] pci 0000:01:08.0: [1131:7130] type 0 class 0x000480
[ 0.127839] pci 0000:01:08.0: reg 10: [mem 0xd910a000-0xd910a3ff]
[ 0.127925] pci 0000:01:08.0: supports D1 D2
[ 0.127950] pci 0000:01:09.0: [8086:1229] type 0 class 0x000200
[ 0.127967] pci 0000:01:09.0: reg 10: [mem 0xda000000-0xda000fff pref]
[ 0.127979] pci 0000:01:09.0: reg 14: [io 0x9800-0x981f]
[ 0.127991] pci 0000:01:09.0: reg 18: [mem 0xd9000000-0xd90fffff]
[ 0.128035] pci 0000:01:09.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.128065] pci 0000:01:0a.0: [1106:3106] type 0 class 0x000200
[ 0.128086] pci 0000:01:0a.0: reg 10: [io 0x9c00-0x9cff]
[ 0.128099] pci 0000:01:0a.0: reg 14: [mem 0xd9109000-0xd91090ff]
[ 0.128180] pci 0000:01:0a.0: supports D1 D2
[ 0.128183] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128211] pci 0000:01:0b.0: [1186:4b01] type 0 class 0x000200
[ 0.128234] pci 0000:01:0b.0: reg 10: [mem 0xd9104000-0xd9107fff]
[ 0.128246] pci 0000:01:0b.0: reg 14: [io 0xa000-0xa0ff]
[ 0.128296] pci 0000:01:0b.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.128337] pci 0000:01:0b.0: supports D1 D2
[ 0.128340] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128381] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.128391] pci 0000:00:08.0: bridge window [io 0x9000-0xafff]
[ 0.128396] pci 0000:00:08.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.128401] pci 0000:00:08.0: bridge window [mem 0xda000000-0xdaffffff pref]
[ 0.128445] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.128464] pci_bus 0000:00: on NUMA node 0
[ 0.128469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.128589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.128786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.128871] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.158758] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.158841] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.158927] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.159007] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.159085] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159167] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.159253] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.159330] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159409] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159490] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.159571] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159651] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159731] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.159813] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159893] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.159972] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.160061] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 0.160127] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.160192] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.160256] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 0.160319] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.160424] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.160528] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.160631] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 0.160734] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.160838] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.160939] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.161014] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 0.161117] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.161220] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.161323] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.161427] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.161651] vgaarb: loaded
[ 0.161943] SCSI subsystem initialized
[ 0.162044] libata version 3.00 loaded.
[ 0.162123] usbcore: registered new interface driver usbfs
[ 0.162145] usbcore: registered new interface driver hub
[ 0.162190] usbcore: registered new device driver usb
[ 0.162339] PCI: Using ACPI for IRQ routing
[ 0.162351] PCI: pci_cache_line_size set to 32 bytes
[ 0.162430] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.162591] NetLabel: Initializing
[ 0.162598] NetLabel: domain hash size = 128
[ 0.162603] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.162623] NetLabel: unlabeled traffic allowed by default
[ 0.175218] AppArmor: AppArmor Filesystem Enabled
[ 0.175287] pnp: PnP ACPI init
[ 0.175324] ACPI: bus type pnp registered
[ 0.175657] pnp 00:00: [io 0x4000-0x407f]
[ 0.175661] pnp 00:00: [io 0x4080-0x40ff]
[ 0.175664] pnp 00:00: [io 0x4400-0x447f]
[ 0.175667] pnp 00:00: [io 0x4480-0x44ff]
[ 0.175670] pnp 00:00: [io 0x4200-0x427f]
[ 0.175673] pnp 00:00: [io 0x4280-0x42ff]
[ 0.175761] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.175777] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.175785] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.175793] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.175800] system 00:00: [io 0x4200-0x427f] has been reserved
[ 0.175807] system 00:00: [io 0x4280-0x42ff] has been reserved
[ 0.175817] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175833] pnp 00:01: [io 0x5000-0x503f]
[ 0.175881] system 00:01: [io 0x5000-0x503f] has been reserved
[ 0.175890] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176100] pnp 00:02: [mem 0x000c8800-0x000cbfff]
[ 0.176104] pnp 00:02: [mem 0x000f0000-0x000f7fff]
[ 0.176107] pnp 00:02: [mem 0x000f8000-0x000fbfff]
[ 0.176110] pnp 00:02: [mem 0x000fc000-0x000fffff]
[ 0.176113] pnp 00:02: [mem 0x3fff0000-0x3fffffff]
[ 0.176116] pnp 00:02: [mem 0xffff0000-0xffffffff]
[ 0.176119] pnp 00:02: [mem 0x00000000-0x0009ffff]
[ 0.176122] pnp 00:02: [mem 0x00100000-0x3ffeffff]
[ 0.176125] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.176128] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.176153] pnp 00:02: disabling [mem 0x000c8800-0x000cbfff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.176167] pnp 00:02: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.176179] pnp 00:02: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.176191] pnp 00:02: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.176203] pnp 00:02: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.176257] system 00:02: [mem 0x3fff0000-0x3fffffff] could not be reserved
[ 0.176267] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.176275] system 00:02: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.176283] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.176291] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.176299] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.176377] pnp 00:03: [bus 00-ff]
[ 0.176381] pnp 00:03: [io 0x0cf8-0x0cff]
[ 0.176384] pnp 00:03: [io 0x0000-0x0cf7 window]
[ 0.176387] pnp 00:03: [io 0x0d00-0xffff window]
[ 0.176391] pnp 00:03: [mem 0x000a0000-0x000bffff window]
[ 0.176394] pnp 00:03: [mem 0x000c0000-0x000dffff window]
[ 0.176403] pnp 00:03: [mem 0x40000000-0xfebfffff window]
[ 0.176474] pnp 00:03: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.177106] pnp 00:04: [io 0x0010-0x001f]
[ 0.177110] pnp 00:04: [io 0x0022-0x003f]
[ 0.177113] pnp 00:04: [io 0x0044-0x005f]
[ 0.177116] pnp 00:04: [io 0x0062-0x0063]
[ 0.177118] pnp 00:04: [io 0x0065-0x006f]
[ 0.177121] pnp 00:04: [io 0x0074-0x007f]
[ 0.177124] pnp 00:04: [io 0x0091-0x0093]
[ 0.177127] pnp 00:04: [io 0x00a2-0x00bf]
[ 0.177129] pnp 00:04: [io 0x00e0-0x00ef]
[ 0.177132] pnp 00:04: [io 0x0b78-0x0b7b]
[ 0.177135] pnp 00:04: [io 0x0f78-0x0f7b]
[ 0.177138] pnp 00:04: [io 0x0a78-0x0a7b]
[ 0.177141] pnp 00:04: [io 0x0e78-0x0e7b]
[ 0.177143] pnp 00:04: [io 0x0bbc-0x0bbf]
[ 0.177146] pnp 00:04: [io 0x0fbc-0x0fbf]
[ 0.177149] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.177152] pnp 00:04: [io 0x0294-0x0297]
[ 0.177154] pnp 00:04: [io 0x04e0-0x04e7]
[ 0.177238] system 00:04: [io 0x0b78-0x0b7b] has been reserved
[ 0.177248] system 00:04: [io 0x0f78-0x0f7b] has been reserved
[ 0.177255] system 00:04: [io 0x0a78-0x0a7b] has been reserved
[ 0.177262] system 00:04: [io 0x0e78-0x0e7b] has been reserved
[ 0.177269] system 00:04: [io 0x0bbc-0x0bbf] has been reserved
[ 0.177277] system 00:04: [io 0x0fbc-0x0fbf] has been reserved
[ 0.177284] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.177291] system 00:04: [io 0x0294-0x0297] has been reserved
[ 0.177298] system 00:04: [io 0x04e0-0x04e7] has been reserved
[ 0.177306] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177328] pnp 00:05: [dma 4]
[ 0.177331] pnp 00:05: [io 0x0000-0x000f]
[ 0.177334] pnp 00:05: [io 0x0080-0x0090]
[ 0.177337] pnp 00:05: [io 0x0094-0x009f]
[ 0.177340] pnp 00:05: [io 0x00c0-0x00df]
[ 0.177386] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.177404] pnp 00:06: [io 0x0070-0x0073]
[ 0.177421] pnp 00:06: [irq 8]
[ 0.177469] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177483] pnp 00:07: [io 0x0061]
[ 0.177535] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.177550] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.177558] pnp 00:08: [irq 13]
[ 0.177606] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.177759] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.177762] pnp 00:09: [io 0x03f7]
[ 0.177770] pnp 00:09: [irq 6]
[ 0.177773] pnp 00:09: [dma 2]
[ 0.177841] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.178061] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.178068] pnp 00:0a: [irq 4]
[ 0.178167] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.178412] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.178419] pnp 00:0b: [irq 3]
[ 0.178508] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.178902] pnp 00:0c: [io 0x0378-0x037f]
[ 0.178906] pnp 00:0c: [io 0x0778-0x077b]
[ 0.178913] pnp 00:0c: [irq 7]
[ 0.179001] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.179339] pnp 00:0d: [io 0x0200-0x0207]
[ 0.179400] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.179630] pnp 00:0e: [io 0x0330-0x0331]
[ 0.179637] pnp 00:0e: [irq 10]
[ 0.179720] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.179733] pnp: PnP ACPI: found 15 devices
[ 0.179739] ACPI: ACPI bus type pnp unregistered
[ 0.179747] PnPBIOS: Disabled by ACPI PNP
[ 0.217001] Switching to clocksource acpi_pm
[ 0.217039] PCI: max bus depth: 1 pci_try_num: 2
[ 0.217070] pci 0000:01:09.0: BAR 6: assigned [mem 0xda100000-0xda1fffff pref]
[ 0.217082] pci 0000:01:06.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
[ 0.217091] pci 0000:01:07.0: BAR 6: assigned [mem 0xda040000-0xda05ffff pref]
[ 0.217101] pci 0000:01:0b.0: BAR 6: assigned [mem 0xda060000-0xda07ffff pref]
[ 0.217110] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.217118] pci 0000:00:08.0: bridge window [io 0x9000-0xafff]
[ 0.217128] pci 0000:00:08.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.217137] pci 0000:00:08.0: bridge window [mem 0xda000000-0xdaffffff pref]
[ 0.217150] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.217173] pci 0000:00:08.0: setting latency timer to 64
[ 0.217182] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.217186] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff]
[ 0.217190] pci_bus 0000:01: resource 0 [io 0x9000-0xafff]
[ 0.217193] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 0.217197] pci_bus 0000:01: resource 2 [mem 0xda000000-0xdaffffff pref]
[ 0.217262] NET: Registered protocol family 2
[ 0.217358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.217814] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.219275] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.219978] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.219986] TCP reno registered
[ 0.219994] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219994] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219994] NET: Registered protocol family 1
[ 0.219994] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 0.219994] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 0.219994] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 0.220019] pci 0000:01:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.220039] PCI: CLS 32 bytes, default 32
[ 0.220123] Trying to unpack rootfs image as initramfs...
[ 0.592438] Freeing initrd memory: 11096k freed
[ 0.606539] audit: initializing netlink socket (disabled)
[ 0.606573] type=2000 audit(1336693957.600:1): initialized
[ 0.636611] highmem bounce pool size: 64 pages
[ 0.636629] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.639316] VFS: Disk quotas dquot_6.5.2
[ 0.639398] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.640276] fuse init (API version 7.18)
[ 0.640410] msgmni has been set to 1741
[ 0.640937] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.640988] io scheduler noop registered
[ 0.640995] io scheduler deadline registered
[ 0.641007] io scheduler cfq registered (default)
[ 0.641233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.641271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.641489] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.641505] ACPI: Power Button [PWRB]
[ 0.641587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.641597] ACPI: Power Button [PWRF]
[ 0.641669] ACPI: Fan [FAN] (on)
[ 0.645266] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.645274] ACPI: Thermal Zone [THRM] (52 C)
[ 0.645354] GHES: HEST is not enabled!
[ 0.645378] isapnp: Scanning for PnP cards...
[ 0.999901] isapnp: No Plug & Play device found
[ 1.000046] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.020509] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.040978] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.062989] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.083501] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.083809] Linux agpgart interface v0.103
[ 1.083907] agpgart: Detected NVIDIA nForce2 chipset
[ 1.092149] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 1.094176] brd: module loaded
[ 1.095218] loop: module loaded
[ 1.095587] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 1.096132] Fixed MDIO Bus: probed
[ 1.096175] tun: Universal TUN/TAP device driver, 1.6
[ 1.096181] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.096257] PPP generic driver version 2.4.2
[ 1.096395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.096448] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 1.096453] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 1.096517] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.096555] ehci_hcd 0000:00:02.2: debug port 1
[ 1.096564] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
[ 1.096575] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
[ 1.096603] ehci_hcd 0000:00:02.2: irq 20, io mem 0xdb000000
[ 1.108028] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 1.108212] hub 1-0:1.0: USB hub found
[ 1.108224] hub 1-0:1.0: 6 ports detected
[ 1.108333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.108370] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.108374] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.108436] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.108475] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdb004000
[ 1.166154] hub 2-0:1.0: USB hub found
[ 1.166166] hub 2-0:1.0: 3 ports detected
[ 1.166272] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.166276] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 1.166335] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 1.166373] ohci_hcd 0000:00:02.1: irq 21, io mem 0xdb005000
[ 1.222141] hub 3-0:1.0: USB hub found
[ 1.222153] hub 3-0:1.0: 3 ports detected
[ 1.222236] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.222332] usbcore: registered new interface driver libusual
[ 1.222406] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.472367] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.472514] mousedev: PS/2 mouse device common for all mice
[ 1.472700] rtc_cmos 00:06: RTC can wake from S4
[ 1.472828] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.472862] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.472948] device-mapper: uevent: version 1.0.3
[ 1.473057] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.473108] EISA: Probing bus 0 at eisa.0
[ 1.473142] Cannot allocate resource for EISA slot 4
[ 1.473149] Cannot allocate resource for EISA slot 5
[ 1.473171] EISA: Detected 0 cards.
[ 1.473187] cpufreq-nforce2: Detected nForce2 chipset revision C1
[ 1.473193] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
[ 1.473209] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.5
[ 1.473249] cpuidle: using governor ladder
[ 1.473255] cpuidle: using governor menu
[ 1.473261] EFI Variables Facility v0.08 2004-May-17
[ 1.473569] TCP cubic registered
[ 1.473731] NET: Registered protocol family 10
[ 1.474400] NET: Registered protocol family 17
[ 1.474425] Registering the dns_resolver key type
[ 1.474459] Using IPI No-Shortcut mode
[ 1.474594] PM: Hibernation image not present or could not be loaded.
[ 1.474621] registered taskstats version 1
[ 1.484387] Magic number: 12:524:908
[ 1.484474] mem port: hash matches
[ 1.484555] rtc_cmos 00:06: setting system clock to 2012-05-10 23:52:38 UTC (1336693958)
[ 1.484565] powernow-k8: Processor cpuid 6a0 not supported
[ 1.484589] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.484595] EDD information not available.
[ 1.484831] Freeing unused kernel memory: 740k freed
[ 1.485733] Write protecting the kernel text: 5816k
[ 1.485828] Write protecting the kernel read-only data: 2360k
[ 1.512295] udevd[74]: starting version 175
[ 1.608132] Floppy drive(s): fd0 is 1.44M
[ 1.628425] FDC 0 is a post-1991 82077
[ 1.636079] Refined TSC clocksource calibration: 1921.022 MHz.
[ 1.636101] Switching to clocksource tsc
[ 1.705913] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.705964] 3c59x: Donald Becker and others.
[ 1.705984] 0000:01:06.0: 3Com PCI 3c905C Tornado at f8412000.
[ 1.735530] pata_amd 0000:00:09.0: version 0.4.1
[ 1.735616] pata_amd 0000:00:09.0: setting latency timer to 64
[ 1.739301] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.739318] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.757183] scsi0 : pata_amd
[ 1.758224] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 1.758237] via_rhine: Broken BIOS detected, avoid_D3 enabled
[ 1.759808] scsi1 : pata_amd
[ 1.760802] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.760812] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.890667] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.912216] e100 0000:01:09.0: eth1: addr 0xda000000, irq 17, MAC addr 00:60:94:a5:1e:df
[ 1.912329] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.912391] skge: 1.14 addr 0xd9100000 irq 19 chip Yukon-Lite rev 9
[ 1.913101] skge 0000:01:07.0: eth2: addr 00:17:9a:b3:95:8d
[ 1.913166] skge: 1.14 addr 0xd9104000 irq 19 chip Yukon-Lite rev 9
[ 1.913916] skge 0000:01:0b.0: eth3: addr 00:1c:f0:98:37:c3
[ 1.922012] via-rhine 0000:01:0a.0: eth4: VIA Rhine III at 0xd9109000, 00:24:01:05:b1:ee, IRQ 18
[ 1.922800] via-rhine 0000:01:0a.0: eth4: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[ 1.924580] ata1.00: ATA-6: ST320410A, 3.34, max UDMA/100
[ 1.924590] ata1.00: 39102336 sectors, multi 16: LBA
[ 1.924605] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[ 1.940434] ata1.00: configured for UDMA/100
[ 1.940631] scsi 0:0:0:0: Direct-Access ATA ST320410A 3.34 PQ: 0 ANSI: 5
[ 1.941058] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.941402] sd 0:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.941489] sd 0:0:0:0: [sda] Write Protect is off
[ 1.941497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.941532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.976957] sda: sda1 sda2 sda3
[ 1.977576] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.569677] md: linear personality registered for level -1
[ 2.572626] md: multipath personality registered for level -4
[ 2.575535] md: raid0 personality registered for level 0
[ 2.578963] md: raid1 personality registered for level 1
[ 2.648067] raid6: int32x1 771 MB/s
[ 2.716045] raid6: int32x2 735 MB/s
[ 2.784056] raid6: int32x4 562 MB/s
[ 2.852010] raid6: int32x8 486 MB/s
[ 2.920014] raid6: mmxx1 1543 MB/s
[ 2.988004] raid6: mmxx2 2705 MB/s
[ 3.056034] raid6: sse1x1 1454 MB/s
[ 3.124027] raid6: sse1x2 2322 MB/s
[ 3.124033] raid6: using algorithm sse1x2 (2322 MB/s)
[ 3.124650] async_tx: api initialized (async)
[ 3.125327] xor: automatically using best checksumming function: pIII_sse
[ 3.144005] pIII_sse : 5385.000 MB/sec
[ 3.144011] xor: using function: pIII_sse (5385.000 MB/sec)
[ 3.147525] md: raid6 personality registered for level 6
[ 3.147543] md: raid5 personality registered for level 5
[ 3.147549] md: raid4 personality registered for level 4
[ 3.161438] md: raid10 personality registered for level 10
[ 3.166402] mdadm: sending ioctl 800c0910 to a partition!
[ 3.166422] mdadm: sending ioctl 800c0910 to a partition!
[ 3.166439] mdadm: sending ioctl 1261 to a partition!
[ 3.166445] mdadm: sending ioctl 1261 to a partition!
[ 3.166818] mdadm: sending ioctl 1261 to a partition!
[ 3.166826] mdadm: sending ioctl 1261 to a partition!
[ 3.166978] mdadm: sending ioctl 1261 to a partition!
[ 3.166986] mdadm: sending ioctl 1261 to a partition!
[ 3.167166] mdadm: sending ioctl 1261 to a partition!
[ 3.167173] mdadm: sending ioctl 1261 to a partition!
[ 3.239462] PM: Starting manual resume from disk
[ 3.239483] PM: Hibernation image partition 8:2 present
[ 3.239485] PM: Looking for hibernation image.
[ 3.239827] PM: Image not found (code -22)
[ 3.239830] PM: Hibernation image not present or could not be loaded.
[ 3.247045] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.247063] EXT4-fs (sda1): write access will be enabled during recovery
[ 16.000649] EXT4-fs (sda1): recovery complete
[ 16.001772] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 29.947855] udevd[390]: starting version 175
[ 30.493743] evbug: Connected device: input0 (Power Button at PNP0C0C/button/input0)
[ 30.493750] evbug: Connected device: input1 (Power Button at LNXPWRBN/button/input0)
[ 30.526785] parport_pc 00:0c: reported by Plug and Play ACPI
[ 30.526863] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 30.660456] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 59659kHz
[ 30.751449] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[ 30.751500] i2c i2c-1: nForce2 SMBus adapter at 0x5040
[ 30.793042] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 30.793129] evbug: Connected device: input2 (PC Speaker at isa0061/input0)
[ 30.835287] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.008529] Linux video capture interface: v2.00
[ 31.122407] udevd[441]: renamed network interface eth0 to rename2
[ 31.183690] IR NEC protocol handler initialized
[ 31.197126] IR RC5(x) protocol handler initialized
[ 31.219941] IR RC6 protocol handler initialized
[ 31.238199] IR JVC protocol handler initialized
[ 31.242857] udevd[450]: renamed network interface eth2 to rename4
[ 31.250882] IR Sony protocol handler initialized
[ 31.253335] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 31.253573] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 31.253608] saa7130[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xd910a000
[ 31.253624] saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected]
[ 31.253659] saa7130[0]: board init: gpio is 39000
[ 31.253665] saa7130[0]: there are different flyvideo cards with different tuners
[ 31.253667] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[ 31.253669] saa7130[0]: option to override the default value.
[ 31.264145] IR SANYO protocol handler initialized
[ 31.274808] udevd[441]: renamed network interface rename2 to eth2
[ 31.293907] IR MCE Keyboard/mouse protocol handler initialized
[ 31.306724] udevd[452]: renamed network interface eth1 to eth0
[ 31.308065] Registered IR keymap rc-flyvideo
[ 31.308221] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0/input3
[ 31.308455] evbug: Connected device: input3 (saa7134 IR (LifeView/Typhoon Fl at pci-0000:01:08.0/ir0)
[ 31.308460] rc0: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0
[ 31.344154] udevd[450]: renamed network interface rename4 to eth1
[ 31.460015] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 31.460044] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460062] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460080] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460097] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460114] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460131] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460149] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460166] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460183] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460200] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460217] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460235] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460252] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460269] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.460286] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.519223] lirc_dev: IR Remote Control driver registered, major 251
[ 31.520055] IR LIRC bridge handler initialized
[ 31.599588] i2c-core: driver [tuner] using legacy suspend method
[ 31.599604] i2c-core: driver [tuner] using legacy resume method
[ 31.608139] tuner 2-0061: Tuner -1 found with type(s) Radio TV.
[ 31.704055] tuner-simple 2-0061: creating new instance
[ 31.704073] tuner-simple 2-0061: type set to 37 (LG PAL (newer TAPC series))
[ 31.728179] saa7130[0]: registered device video0 [v4l2]
[ 31.728359] saa7130[0]: registered device vbi0
[ 31.728463] saa7130[0]: registered device radio0
[ 32.381656] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 32.381718] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 32.704019] intel8x0_measure_ac97_clock: measured 52733 usecs (2560 samples)
[ 32.704036] intel8x0: clocking to 47460
[ 33.353713] Adding 249000k swap on /dev/sda2. Priority:-1 extents:1 across:249000k
[ 33.394528] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 33.642777] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 33.859896] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 34.021902] bttv: driver version 0.9.19 loaded
[ 34.021919] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 34.302207] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 34.302750] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \IP__ 1 (20120111/utaddress-251)
[ 34.302768] ACPI: This conflict may cause random problems and system instability
[ 34.302776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.380683] scsi_verify_blk_ioctl: 32 callbacks suppressed
[ 34.380699] mdadm: sending ioctl 800c0910 to a partition!
[ 34.380707] mdadm: sending ioctl 800c0910 to a partition!
[ 34.380723] mdadm: sending ioctl 1261 to a partition!
[ 34.380730] mdadm: sending ioctl 1261 to a partition!
[ 34.409094] mdadm: sending ioctl 1261 to a partition!
[ 34.409102] mdadm: sending ioctl 1261 to a partition!
[ 34.413725] mdadm: sending ioctl 1261 to a partition!
[ 34.413733] mdadm: sending ioctl 1261 to a partition!
[ 34.432229] mdadm: sending ioctl 1261 to a partition!
[ 34.432237] mdadm: sending ioctl 1261 to a partition!
[ 47.764845] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 48.626013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.628285] e100 0000:01:09.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 48.628685] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 48.814030] skge 0000:01:07.0: eth1: enabling interface
[ 48.819447] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 49.037836] eth2: setting full-duplex.
[ 49.257571] skge 0000:01:0b.0: eth3: enabling interface
[ 49.261184] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 50.004337] NET: Registered protocol family 24
[ 50.481099] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.709894] nf_conntrack version 0.5.0 (16052 buckets, 64208 max)
[ 51.161749] skge 0000:01:07.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
[ 51.162037] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 51.605280] skge 0000:01:0b.0: eth3: Link is up at 1000 Mbps, full duplex, flow control none
[ 51.605588] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 51.635105] NET: Registered protocol family 15
Reply to: