Since I guess this is an ACPI related issue, additional to the dmesg log and the output of lscpi --vvnn I attach the output of acpidump and the disassembled ASL source code file (DSDT). I hope this helps.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-11) ) #1 SMP Debian 3.6.9-1~experimental.1 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.6-trunk-amd64 root=/dev/mapper/rosa-root ro quiet video.use_bios_initial_backlight=0 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa83dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa83e000-0x00000000aaa68fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aaa69000-0x00000000acdd8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000acdd9000-0x00000000ace1afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ace1b000-0x00000000ace3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Folio 13 - 2000 Notebook PC/1899, BIOS F.17 07/05/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable [ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FF0000000 write-back [ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xacffffff] [ 0.000000] [mem 0x00000000-0xacffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xacffffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14fdfffff] [ 0.000000] [mem 0x100000000-0x14fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x14fdfffff @ [mem 0xace3c000-0xace3efff] [ 0.000000] RAMDISK: [mem 0x3685a000-0x37424fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000acffe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 00000000acffb000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 00000000acfea000 0D655 (v01 HP INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000acf6b000 00040 [ 0.000000] ACPI: TCPA 00000000acffd000 00032 (v02 HP INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: HPET 00000000acffa000 00038 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 00000000acff9000 0008C (v02 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 00000000acff8000 0003C (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC 00000000acfe9000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: MSDM 00000000acfe8000 00055 (v03 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 00000000acfe7000 00224 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000acfe6000 006FE (v01 HP INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000acfe4000 00028 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 00000000acfe1000 00034 (v07 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 00000000acffc000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000acfe0000 00804 (v01 HP INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000acfdf000 00996 (v01 HP INSYDE 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000acfde000 00335 (v01 HP INSYDE 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14fdfffff] [ 0.000000] NODE_DATA [mem 0x14fdfc000-0x14fdfffff] [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xaa83dfff] [ 0.000000] node 0: [mem 0xaaa69000-0xacdd8fff] [ 0.000000] node 0: [mem 0xace1b000-0xace3efff] [ 0.000000] node 0: [mem 0xacfff000-0xacffffff] [ 0.000000] node 0: [mem 0x100000000-0x14fdfffff] [ 0.000000] On node 0 totalpages: 1034592 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 689163 pages, LIFO batch:31 [ 0.000000] Normal zone: 4473 pages used for memmap [ 0.000000] Normal zone: 322695 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000aa83e000 - 00000000aaa69000 [ 0.000000] PM: Registered nosave memory: 00000000acdd9000 - 00000000ace1b000 [ 0.000000] PM: Registered nosave memory: 00000000ace3f000 - 00000000acebf000 [ 0.000000] PM: Registered nosave memory: 00000000acebf000 - 00000000acfbf000 [ 0.000000] PM: Registered nosave memory: 00000000acfbf000 - 00000000acfff000 [ 0.000000] PM: Registered nosave memory: 00000000ad000000 - 00000000afa00000 [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014fa00000 s83840 r8192 d22656 u262144 [ 0.000000] pcpu-alloc: s83840 r8192 d22656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015777 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6-trunk-amd64 root=/dev/mapper/rosa-root ro quiet video.use_bios_initial_backlight=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3991388k/5502976k available (3537k kernel code, 1364608k absent, 146980k reserved, 3180k data, 592k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.456 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.91 BogoMIPS (lpj=6385824) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000038] Security Framework initialized [ 0.000042] AppArmor: AppArmor disabled by boot time parameter [ 0.000332] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001388] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001834] Mount-cache hash table entries: 256 [ 0.002054] Initializing cgroup subsys cpuacct [ 0.002056] Initializing cgroup subsys memory [ 0.002067] Initializing cgroup subsys devices [ 0.002069] Initializing cgroup subsys freezer [ 0.002071] Initializing cgroup subsys net_cls [ 0.002072] Initializing cgroup subsys blkio [ 0.002074] Initializing cgroup subsys perf_event [ 0.002103] CPU: Physical Processor ID: 0 [ 0.002104] CPU: Processor Core ID: 0 [ 0.002109] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002109] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002112] mce: CPU supports 7 MCE banks [ 0.002124] CPU0: Thermal monitoring handled by SMI [ 0.002131] process: using mwait in idle threads [ 0.002136] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002136] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002136] tlb_flushall_shift is 0x5 [ 0.002672] ACPI: Core revision 20120711 [ 0.024549] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064208] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz stepping 07 [ 0.168245] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.168252] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.168254] ... version: 3 [ 0.168255] ... bit width: 48 [ 0.168256] ... generic registers: 4 [ 0.168258] ... value mask: 0000ffffffffffff [ 0.168259] ... max period: 000000007fffffff [ 0.168260] ... fixed-purpose events: 3 [ 0.168261] ... event mask: 000000070000000f [ 0.168479] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.179667] CPU1: Thermal monitoring handled by SMI [ 0.192948] CPU2: Thermal monitoring handled by SMI [ 0.206215] CPU3: Thermal monitoring handled by SMI [ 0.168621] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.208356] Brought up 4 CPUs [ 0.208360] smpboot: Total of 4 processors activated (12771.64 BogoMIPS) [ 0.212181] devtmpfs: initialized [ 0.216011] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes) [ 0.216167] dummy: [ 0.216243] NET: Registered protocol family 16 [ 0.216401] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.216403] ACPI: bus type pci registered [ 0.216487] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.216490] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.233103] PCI: Using configuration type 1 for base access [ 0.233863] bio: create slab <bio-0> at 0 [ 0.233952] ACPI: Added _OSI(Module Device) [ 0.233954] ACPI: Added _OSI(Processor Device) [ 0.233956] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.233958] ACPI: Added _OSI(Processor Aggregator Device) [ 0.235660] ACPI: EC: Look up EC in DSDT [ 0.238426] ACPI: Executed 1 blocks of module-level executable AML code [ 0.243047] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.243670] ACPI: SSDT 00000000ace70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.244122] ACPI: Dynamic OEM Table Load: [ 0.244125] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.244537] ACPI: SSDT 00000000ace71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.245043] ACPI: Dynamic OEM Table Load: [ 0.245046] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.245218] ACPI: SSDT 00000000ace6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.245657] ACPI: Dynamic OEM Table Load: [ 0.245659] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.246764] ACPI Error: No handler for Region [RCM0] (ffff88014ae78b28) [SystemCMOS] (20120711/evregion-376) [ 0.246769] ACPI Error: Region SystemCMOS (ID=5) has no handler (20120711/exfldio-306) [ 0.246773] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff88014ae7ba88), AE_NOT_EXIST (20120711/psparse-536) [ 0.246779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88014ae896a0), AE_NOT_EXIST (20120711/psparse-536) [ 0.246792] ACPI: Interpreter enabled [ 0.246797] ACPI: (supports S0 S3 S4 S5) [ 0.246824] ACPI: Using IOAPIC for interrupt routing [ 0.370756] ACPI: Power Resource [FN00] (off) [ 0.370855] ACPI: Power Resource [FN01] (off) [ 0.371293] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.371743] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.371748] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.372187] \_SB_.PCI0:_OSC invalid UUID [ 0.372188] _OSC request data:1 8 1f [ 0.372193] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.372936] PCI host bridge to bus 0000:00 [ 0.372941] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff] [ 0.372943] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.372946] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.372948] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.372950] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.372953] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.372963] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.373005] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.373017] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.373024] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.373029] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.373092] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.373117] pci 0000:00:16.0: reg 10: [mem 0xc2704000-0xc270400f 64bit] [ 0.373199] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.373239] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.373561] pci 0000:00:1a.0: reg 10: [mem 0xc2709000-0xc27093ff] [ 0.375421] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.375452] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.375470] pci 0000:00:1b.0: reg 10: [mem 0xc2700000-0xc2703fff 64bit] [ 0.375545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.375571] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.375657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.375688] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.375774] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.375804] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.375889] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.375922] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.376054] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.376101] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.376419] pci 0000:00:1d.0: reg 10: [mem 0xc2708000-0xc27083ff] [ 0.378276] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.378306] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.378440] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.378461] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.378470] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.378479] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.378488] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.378497] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.378506] pci 0000:00:1f.2: reg 24: [mem 0xc2707000-0xc27077ff] [ 0.378555] pci 0000:00:1f.2: PME# supported from D3hot [ 0.378577] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.378594] pci 0000:00:1f.3: reg 10: [mem 0xc2705000-0xc27050ff 64bit] [ 0.378617] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f] [ 0.378697] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-fe] [ 0.378782] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.378851] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff] [ 0.378976] pci 0000:01:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.379050] pci 0000:01:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.379375] pci 0000:01:00.0: supports D1 D2 [ 0.379377] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.386958] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.386968] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.386988] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.387047] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe] [ 0.387216] pci 0000:02:00.0: [8086:008b] type 00 class 0x028000 [ 0.387387] pci 0000:02:00.0: reg 10: [mem 0xc2600000-0xc2601fff 64bit] [ 0.388134] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.399028] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.399035] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff] [ 0.399088] pci_bus 0000:03: busn_res: [bus 03-08] is inserted under [bus 00-fe] [ 0.399170] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.399230] pci 0000:03:00.0: reg 10: [mem 0xc1601000-0xc1601fff] [ 0.399717] pci 0000:03:00.0: supports D1 D2 [ 0.399719] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.399885] pci 0000:03:00.1: [10ec:5209] type 00 class 0x080500 [ 0.399946] pci 0000:03:00.1: reg 10: [mem 0xc1600000-0xc16000ff] [ 0.400433] pci 0000:03:00.1: supports D1 D2 [ 0.400435] pci 0000:03:00.1: PME# supported from D1 D2 D3hot [ 0.410972] pci 0000:00:1c.3: PCI bridge to [bus 03-08] [ 0.410988] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.410992] pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff] [ 0.411000] pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.411071] pci_bus 0000:09: busn_res: [bus 09] is inserted under [bus 00-fe] [ 0.411213] pci 0000:09:00.0: [1b73:1009] type 00 class 0x0c0330 [ 0.411284] pci 0000:09:00.0: reg 10: [mem 0xc1500000-0xc150ffff 64bit] [ 0.411340] pci 0000:09:00.0: reg 18: [mem 0xc1510000-0xc1510fff 64bit] [ 0.411397] pci 0000:09:00.0: reg 20: [mem 0xc1511000-0xc1511fff 64bit] [ 0.411635] pci 0000:09:00.0: supports D1 [ 0.411637] pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.418982] pci 0000:00:1c.4: PCI bridge to [bus 09] [ 0.418989] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff] [ 0.419018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.419267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.419318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.419365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.419411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.419532] \_SB_.PCI0:_OSC invalid UUID [ 0.419533] _OSC request data:1 1f 1f [ 0.419537] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.419538] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.424064] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.424125] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.424185] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.424243] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.424300] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.424358] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.424414] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.424471] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.424572] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.424581] vgaarb: loaded [ 0.424582] vgaarb: bridge control possible 0000:00:02.0 [ 0.424632] PCI: Using ACPI for IRQ routing [ 0.431718] PCI: pci_cache_line_size set to 64 bytes [ 0.432017] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.432020] e820: reserve RAM buffer [mem 0xaa83e000-0xabffffff] [ 0.432022] e820: reserve RAM buffer [mem 0xacdd9000-0xafffffff] [ 0.432025] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff] [ 0.432028] e820: reserve RAM buffer [mem 0xad000000-0xafffffff] [ 0.432030] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff] [ 0.432169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.432175] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.434191] Switching to clocksource hpet [ 0.436096] pnp: PnP ACPI init [ 0.436110] ACPI: bus type pnp registered [ 0.436500] pnp 00:00: [bus 00-fe] [ 0.436504] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.436506] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.436508] pnp 00:00: [io 0x0d00-0xffff window] [ 0.436510] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.436513] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.436515] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.436517] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.436519] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.436521] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.436523] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.436525] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.436528] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.436530] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.436532] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.436534] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.436537] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.436539] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.436541] pnp 00:00: [mem 0xafa00000-0xfeafffff window] [ 0.436598] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.436613] pnp 00:01: [io 0x0000-0x001f] [ 0.436615] pnp 00:01: [io 0x0081-0x0091] [ 0.436617] pnp 00:01: [io 0x0093-0x009f] [ 0.436619] pnp 00:01: [io 0x00c0-0x00df] [ 0.436622] pnp 00:01: [dma 4] [ 0.436644] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.436733] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.436758] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.436769] pnp 00:03: [io 0x00f0] [ 0.436779] pnp 00:03: [irq 13] [ 0.436801] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.436811] pnp 00:04: [io 0x0070-0x0077] [ 0.436816] pnp 00:04: [irq 8] [ 0.436839] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.436889] pnp 00:05: [io 0x0060] [ 0.436891] pnp 00:05: [io 0x0064] [ 0.436897] pnp 00:05: [irq 1] [ 0.436920] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.436941] pnp 00:06: [irq 12] [ 0.436967] pnp 00:06: Plug and Play ACPI device, IDs SYN1e5a SYN0100 SYN0002 PNP0f13 (active) [ 0.494350] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 0.494352] pnp 00:07: [mem 0xfed10000-0xfed17fff] [ 0.494354] pnp 00:07: [mem 0xfed18000-0xfed18fff] [ 0.494356] pnp 00:07: [mem 0xfed19000-0xfed19fff] [ 0.494358] pnp 00:07: [mem 0xe0000000-0xefffffff] [ 0.494360] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 0.494362] pnp 00:07: [mem 0xfed90000-0xfed93fff] [ 0.494364] pnp 00:07: [mem 0xff000000-0xffffffff] [ 0.494366] pnp 00:07: [mem 0xfee00000-0xfeefffff] [ 0.494369] pnp 00:07: [mem 0xafa00000-0xafa00fff] [ 0.494419] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.494422] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.494424] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.494427] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.494430] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.494432] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.494435] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.494437] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.494440] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.494442] system 00:07: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.494445] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.494699] pnp 00:08: [mem 0x20000000-0x201fffff] [ 0.494701] pnp 00:08: [mem 0x40000000-0x401fffff] [ 0.494757] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved [ 0.494760] system 00:08: [mem 0x40000000-0x401fffff] could not be reserved [ 0.494763] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.494831] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 0.494875] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.494878] pnp: PnP ACPI: found 10 devices [ 0.494879] ACPI: ACPI bus type pnp unregistered [ 0.501441] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.501446] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.501455] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.501462] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.501468] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff] [ 0.501478] pci 0000:00:1c.3: PCI bridge to [bus 03-08] [ 0.501482] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.501487] pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff] [ 0.501492] pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.501499] pci 0000:00:1c.4: PCI bridge to [bus 09] [ 0.501507] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff] [ 0.501557] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.501559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.501562] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.501564] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.501566] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.501568] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.501570] pci_bus 0000:02: resource 1 [mem 0xc2600000-0xc26fffff] [ 0.501572] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.501574] pci_bus 0000:03: resource 1 [mem 0xc1600000-0xc25fffff] [ 0.501576] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.501579] pci_bus 0000:09: resource 1 [mem 0xc1500000-0xc15fffff] [ 0.501641] NET: Registered protocol family 2 [ 0.502394] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.504198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.504419] TCP: Hash tables configured (established 524288 bind 65536) [ 0.504437] TCP: reno registered [ 0.504448] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.504469] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.504585] NET: Registered protocol family 1 [ 0.504601] pci 0000:00:02.0: Boot video device [ 0.535732] PCI: CLS 64 bytes, default 64 [ 0.535776] Unpacking initramfs... [ 0.819742] Freeing initrd memory: 12076k freed [ 0.821419] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.821424] software IO TLB [mem 0xa683e000-0xaa83dfff] (64MB) mapped at [ffff8800a683e000-ffff8800aa83dfff] [ 0.821471] Simple Boot Flag at 0x44 set to 0x1 [ 0.821924] audit: initializing netlink socket (disabled) [ 0.821943] type=2000 audit(1355142043.708:1): initialized [ 0.838396] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.838947] VFS: Disk quotas dquot_6.5.2 [ 0.838975] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.839059] msgmni has been set to 7819 [ 0.839232] alg: No test for stdrng (krng) [ 0.839267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.839302] io scheduler noop registered [ 0.839303] io scheduler deadline registered [ 0.839321] io scheduler cfq registered (default) [ 0.839615] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.839637] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.839638] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.839779] acpiphp_glue: can't evaluate _ADR (0x5) [ 0.840043] intel_idle: MWAIT substates: 0x21120 [ 0.840045] intel_idle: v0.4 model 0x2A [ 0.840046] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.840078] GHES: HEST is not enabled! [ 0.840130] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.840639] Linux agpgart interface v0.103 [ 0.840755] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.883878] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883886] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884026] mousedev: PS/2 mouse device common for all mice [ 0.884196] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.884228] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.884338] cpuidle: using governor ladder [ 0.886950] cpuidle: using governor menu [ 0.886981] drop_monitor: Initializing network drop monitor service [ 0.887071] TCP: cubic registered [ 0.887162] NET: Registered protocol family 10 [ 0.887441] mip6: Mobile IPv6 [ 0.887443] NET: Registered protocol family 17 [ 0.887843] PM: Hibernation image not present or could not be loaded. [ 0.887854] registered taskstats version 1 [ 0.888602] rtc_cmos 00:04: setting system clock to 2012-12-10 12:20:44 UTC (1355142044) [ 0.889854] Freeing unused kernel memory: 592k freed [ 0.889945] Write protecting the kernel read-only data: 6144k [ 0.892203] Freeing unused kernel memory: 548k freed [ 0.894658] Freeing unused kernel memory: 620k freed [ 0.930011] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.967709] udevd[68]: starting version 175 [ 0.987709] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.987972] r8169 0000:01:00.0: irq 40 for MSI/MSI-X [ 0.988263] r8169 0000:01:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000066a000, b4:99:ba:f6:57:8e, XID 0c900800 IRQ 40 [ 0.988269] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.989721] SCSI subsystem initialized [ 0.990728] ACPI: Fan [FAN0] (off) [ 0.990802] ACPI: Fan [FAN1] (off) [ 0.995909] ACPI: bus type usb registered [ 0.995956] usbcore: registered new interface driver usbfs [ 0.995974] usbcore: registered new interface driver hub [ 1.003627] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.003632] ACPI: Thermal Zone [TZ00] (74 C) [ 1.005264] ACPI: bus type scsi registered [ 1.005332] usbcore: registered new device driver usb [ 1.006159] xhci_hcd 0000:09:00.0: xHCI Host Controller [ 1.006172] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 1 [ 1.006527] xhci_hcd 0000:09:00.0: irq 16, io mem 0xc1500000 [ 1.006721] xhci_hcd 0000:09:00.0: irq 41 for MSI/MSI-X [ 1.006731] xhci_hcd 0000:09:00.0: irq 42 for MSI/MSI-X [ 1.006740] xhci_hcd 0000:09:00.0: irq 43 for MSI/MSI-X [ 1.006748] xhci_hcd 0000:09:00.0: irq 44 for MSI/MSI-X [ 1.006756] xhci_hcd 0000:09:00.0: irq 45 for MSI/MSI-X [ 1.006986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.006991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.006994] usb usb1: Product: xHCI Host Controller [ 1.006997] usb usb1: Manufacturer: Linux 3.6-trunk-amd64 xhci_hcd [ 1.007000] usb usb1: SerialNumber: 0000:09:00.0 [ 1.007222] xHCI xhci_add_endpoint called for root hub [ 1.007225] xHCI xhci_check_bandwidth called for root hub [ 1.007269] hub 1-0:1.0: USB hub found [ 1.007364] hub 1-0:1.0: 2 ports detected [ 1.007478] xhci_hcd 0000:09:00.0: xHCI Host Controller [ 1.007485] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 2 [ 1.007621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.007625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.007628] usb usb2: Product: xHCI Host Controller [ 1.007631] usb usb2: Manufacturer: Linux 3.6-trunk-amd64 xhci_hcd [ 1.007634] usb usb2: SerialNumber: 0000:09:00.0 [ 1.007733] xHCI xhci_add_endpoint called for root hub [ 1.007736] xHCI xhci_check_bandwidth called for root hub [ 1.007782] hub 2-0:1.0: USB hub found [ 1.007874] hub 2-0:1.0: 2 ports detected [ 1.009586] libata version 3.00 loaded. [ 1.010570] ahci 0000:00:1f.2: version 3.0 [ 1.010651] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.010699] ahci: SSS flag set, parallel bus scan disabled [ 1.010726] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.010731] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems apst [ 1.010738] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.011304] sdhci: Secure Digital Host Controller Interface driver [ 1.011307] sdhci: Copyright(c) Pierre Ossman [ 1.011628] sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1) [ 1.011680] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.011687] mmc0: no vmmc regulator found [ 1.011708] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.011749] Registered led device: mmc0:: [ 1.011921] scsi0 : ahci [ 1.013089] scsi1 : ahci [ 1.013553] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 1.014110] scsi2 : ahci [ 1.014223] scsi3 : ahci [ 1.014339] scsi4 : ahci [ 1.014468] scsi5 : ahci [ 1.014548] ata1: SATA max UDMA/133 abar m2048@0xc2707000 port 0xc2707100 irq 46 [ 1.014551] ata2: DUMMY [ 1.014553] ata3: DUMMY [ 1.014555] ata4: DUMMY [ 1.014557] ata5: DUMMY [ 1.014558] ata6: DUMMY [ 1.022724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.022780] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.022787] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.022797] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.026709] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.026722] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.026931] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc2709000 [ 1.037871] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.037922] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.037925] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.037927] usb usb3: Product: EHCI Host Controller [ 1.037929] usb usb3: Manufacturer: Linux 3.6-trunk-amd64 ehci_hcd [ 1.037931] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.038085] hub 3-0:1.0: USB hub found [ 1.038090] hub 3-0:1.0: 2 ports detected [ 1.038244] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.038249] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.038254] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.041794] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA [ 1.042168] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.042177] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.042199] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc2708000 [ 1.045043] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.053859] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.053920] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.053923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.053925] usb usb4: Product: EHCI Host Controller [ 1.053927] usb usb4: Manufacturer: Linux 3.6-trunk-amd64 ehci_hcd [ 1.053929] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.054131] hub 4-0:1.0: USB hub found [ 1.054138] hub 4-0:1.0: 2 ports detected [ 1.080980] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.116957] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.152920] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.333672] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.337158] ata1.00: ATA-8: SAMSUNG MZMPA128HMFU-000H1, AXM18H1Q, max UDMA/133 [ 1.337169] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.338980] ata1.00: configured for UDMA/133 [ 1.339322] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPA128 AXM1 PQ: 0 ANSI: 5 [ 1.344279] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.344393] sd 0:0:0:0: [sda] Write Protect is off [ 1.344397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.344424] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.345403] sda: sda1 sda2 < sda5 > [ 1.345881] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.347478] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.349572] usb 3-1: new high-speed USB device number 2 using ehci_hcd [ 1.482077] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.482094] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.482494] hub 3-1:1.0: USB hub found [ 1.482717] hub 3-1:1.0: 6 ports detected [ 1.493205] device-mapper: uevent: version 1.0.3 [ 1.493279] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 1.593489] usb 4-1: new high-speed USB device number 2 using ehci_hcd [ 1.725893] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.725904] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.726306] hub 4-1:1.0: USB hub found [ 1.726382] hub 4-1:1.0: 6 ports detected [ 1.797512] usb 3-1.1: new high-speed USB device number 3 using ehci_hcd [ 1.817301] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.817313] Switching to clocksource tsc [ 2.221873] usb 3-1.1: New USB device found, idVendor=1bcf, idProduct=2c07 [ 2.221884] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.221890] usb 3-1.1: Product: HP TrueVision HD [ 2.221895] usb 3-1.1: Manufacturer: PK40000GO00LOE40A1CO0001A9B [ 2.512992] usb 3-1.2: new full-speed USB device number 4 using ehci_hcd [ 2.609347] usb 3-1.2: New USB device found, idVendor=8086, idProduct=0189 [ 2.609358] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.946369] PM: Starting manual resume from disk [ 8.946373] PM: Hibernation image partition 254:2 present [ 8.946375] PM: Looking for hibernation image. [ 8.946806] PM: Image not found (code -22) [ 8.946808] PM: Hibernation image not present or could not be loaded. [ 8.957505] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.266599] udevd[464]: starting version 175 [ 9.399088] ACPI: Requesting acpi_cpufreq [ 9.399939] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.401142] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 9.401296] ACPI: Lid Switch [LID0] [ 9.404370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 9.404378] ACPI: Power Button [PWRF] [ 9.419895] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 9.419906] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.419911] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 9.419917] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.419919] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.429825] mei 0000:00:16.0: setting latency timer to 64 [ 9.429905] mei 0000:00:16.0: irq 47 for MSI/MSI-X [ 9.437984] mei 0000:00:16.0: wd: failed to find the client [ 9.444606] wmi: Mapper loaded [ 9.451557] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. [ 9.452381] Initializing Realtek PCIE storage driver... [ 9.460800] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 9.460811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.462024] Resource length: 0x1000 [ 9.462061] Original address: 0xc1601000, remapped address: 0xffffc90000672000 [ 9.462066] pci->irq = 19 [ 9.462069] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 19 [ 9.465850] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 9.473499] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 9.513977] iTCO_vendor_support: vendor-support=0 [ 9.515876] Bluetooth: Core ver 2.16 [ 9.515896] NET: Registered protocol family 31 [ 9.515898] Bluetooth: HCI device and connection manager initialized [ 9.515901] Bluetooth: HCI socket layer initialized [ 9.515903] Bluetooth: L2CAP socket layer initialized [ 9.515908] Bluetooth: SCO socket layer initialized [ 9.522193] kvm: disabled by bios [ 9.524757] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 9.528945] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 9.531146] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 9.531744] usbcore: registered new interface driver btusb [ 9.534539] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 9.543240] Linux media interface: v0.10 [ 9.555841] ACPI: AC Adapter [ACAD] (on-line) [ 9.639711] tpm_tis 00:09: TPM is disabled/deactivated (0x7) [ 9.663925] scsi6 : SCSI emulation for PCI-Express Mass Storage devices [ 9.664063] rts_pstor: waiting for device to settle before scanning [ 9.959714] ACPI: Battery Slot [BAT1] (battery present) [ 9.961543] kvm: disabled by bios [ 9.965177] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 9.965217] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 9.965629] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.968825] cfg80211: Calling CRDA to update world regulatory domain [ 9.970092] Linux video capture interface: v2.00 [ 9.975530] [drm] Initialized drm 1.1.0 20060810 [ 9.981845] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.981848] Copyright(c) 2003-2012 Intel Corporation [ 9.981977] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 [ 9.981980] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90010f90000 [ 9.981982] iwlwifi 0000:02:00.0: HW Revision ID = 0x34 [ 9.982111] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X [ 9.984565] uvcvideo: Found UVC 1.00 device HP TrueVision HD (1bcf:2c07) [ 9.995764] pci 0000:00:00.0: Intel Sandybridge Chipset [ 9.995826] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 9.996845] pci 0000:00:00.0: detected 32768K stolen memory [ 9.996889] i915 0000:00:02.0: setting latency timer to 64 [ 10.018114] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 10.018124] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.018125] [drm] Driver supports precise vblank timestamp query. [ 10.018163] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.035680] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 [ 10.056283] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 10.056288] iwldvm: Copyright(c) 2003-2012 Intel Corporation [ 10.056315] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 10.056319] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 10.056322] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 10.056325] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 10.056328] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled [ 10.056332] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 [ 10.056456] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 10.066377] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input4 [ 10.066569] usbcore: registered new interface driver uvcvideo [ 10.066573] USB Video Class driver (1.1.1) [ 10.072179] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6 [ 10.072184] iwlwifi 0000:02:00.0: Device SKU: 0x150 [ 10.072188] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 10.072269] Registered led device: phy0-led [ 10.077836] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.080421] cfg80211: World regulatory domain updated: [ 10.080425] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.080429] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.080432] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.080435] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.080438] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.080441] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.291794] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 10.396203] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 10.507190] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 10.636695] fbcon: inteldrmfb (fb0) is primary device [ 10.663093] rts_pstor: device scan complete [ 10.663362] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 10.663820] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 10.664766] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 10.993538] Console: switching to colour frame buffer device 170x48 [ 11.004897] fb0: inteldrmfb frame buffer device [ 11.004900] drm: registered panic notifier [ 11.009140] acpi device:33: registered as cooling_device6 [ 11.009578] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.009705] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 11.009890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.010166] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 11.562947] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 11.587689] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.587990] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.588223] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.901831] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2031, fw id: 988796 [ 11.907683] kvm: disabled by bios [ 12.017938] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 12.095855] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 12.177390] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 12.375974] loop: module loaded [ 12.392263] usbcore: registered new interface driver usblp [ 13.022458] Adding 4624380k swap on /dev/mapper/rosa-swap_1. Priority:-1 extents:1 across:4624380k SS [ 13.220958] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.827418] RPC: Registered named UNIX socket transport module. [ 13.827423] RPC: Registered udp transport module. [ 13.827424] RPC: Registered tcp transport module. [ 13.827427] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.835842] FS-Cache: Loaded [ 13.837218] Key type dns_resolver registered [ 13.849162] FS-Cache: Netfs 'nfs' registered for caching [ 13.869078] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.001226] Bluetooth: RFCOMM TTY layer initialized [ 15.001235] Bluetooth: RFCOMM socket layer initialized [ 15.001237] Bluetooth: RFCOMM ver 1.11 [ 15.001706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.001710] Bluetooth: BNEP filters: protocol multicast [ 15.069087] lp: driver loaded but no devices found [ 15.075883] ppdev: user-space parallel port driver [ 15.342115] r8169 0000:01:00.0: eth0: link down [ 15.342252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.345082] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 15.351778] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1 [ 15.438700] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 15.445461] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1 [ 15.530356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.752174] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 15.769085] Ebtables v2.0 registered [ 15.791303] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.807600] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.757462] wlan0: authenticate with 70:72:3c:20:76:08 [ 16.784911] wlan0: send auth to 70:72:3c:20:76:08 (try 1/3) [ 16.789363] wlan0: authenticated [ 16.789609] wlan0: waiting for beacon from 70:72:3c:20:76:08 [ 16.890685] wlan0: associate with 70:72:3c:20:76:08 (try 1/3) [ 16.894768] wlan0: RX AssocResp from 70:72:3c:20:76:08 (capab=0x431 status=0 aid=1) [ 16.908879] wlan0: associated [ 16.909000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.909253] cfg80211: Calling CRDA for country: CA [ 16.915674] cfg80211: Regulatory domain changed to country: CA [ 16.915684] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.915694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 16.915701] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 16.915707] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.915714] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.915722] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 23.076233] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 24.559455] hid-generic 0005:045E:0700.0001: unknown main item tag 0x0 [ 24.559610] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/input13 [ 24.560410] hid-generic 0005:045E:0700.0001: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01 [ 49.396700] hid-generic 0005:045E:0762.0002: unknown main item tag 0x0 [ 49.397057] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input14 [ 49.399554] hid-generic 0005:045E:0762.0002: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [ 1810.780322] hid-generic 0005:045E:0700.0003: unknown main item tag 0x0 [ 1810.780576] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/input15 [ 1810.781007] hid-generic 0005:045E:0700.0003: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01 [ 3822.678138] fuse init (API version 7.20) [ 5152.411809] hid-generic 0005:045E:0762.0004: unknown main item tag 0x0 [ 5152.411957] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input16 [ 5152.412398] hid-generic 0005:045E:0762.0004: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [12633.041158] hid-generic 0005:045E:0700.0005: unknown main item tag 0x0 [12633.041292] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/input17 [12633.043055] hid-generic 0005:045E:0700.0005: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01 [12711.485312] hid-generic 0005:045E:0762.0006: unknown main item tag 0x0 [12711.486585] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input18 [12711.486762] hid-generic 0005:045E:0762.0006: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [14726.444681] hid-generic 0005:045E:0762.0007: unknown main item tag 0x0 [14726.444934] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input19 [14726.445089] hid-generic 0005:045E:0762.0007: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [26125.086200] hid-generic 0005:045E:0700.0008: unknown main item tag 0x0 [26125.086463] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/input20 [26125.086914] hid-generic 0005:045E:0700.0008: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01 [26133.218130] hid-generic 0005:045E:0762.0009: unknown main item tag 0x0 [26133.218607] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input21 [26133.220726] hid-generic 0005:045E:0762.0009: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [27627.558609] hid-generic 0005:045E:0762.000A: unknown main item tag 0x0 [27627.558968] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input22 [27627.560930] hid-generic 0005:045E:0762.000A: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [30962.294758] mkvinfo[30310]: segfault at ffffffff ip 0000000000451934 sp 00007fff5cdce3a0 error 4 in mkvinfo-gui[400000+16e000] [35327.095215] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [35331.671343] hda-intel: Unstable LPIB (65336 >= 8192); disabling LPIB delay counting [36842.838978] hid-generic 0005:045E:0762.000B: unknown main item tag 0x0 [36842.839384] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input23 [36842.839590] hid-generic 0005:045E:0762.000B: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [37178.994814] usb 1-2: new high-speed USB device number 2 using xhci_hcd [37179.013138] usb 1-2: New USB device found, idVendor=1307, idProduct=0165 [37179.013148] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [37179.013154] usb 1-2: Product: USB Mass Storage Device [37179.013159] usb 1-2: Manufacturer: USBest Technology [37179.013164] usb 1-2: SerialNumber: 00000000000AC3 [37179.089853] usbcore: registered new interface driver uas [37179.094398] Initializing USB Mass Storage driver... [37179.094616] scsi7 : usb-storage 1-2:1.0 [37179.094762] usbcore: registered new interface driver usb-storage [37179.094764] USB Mass Storage support registered. [37180.095277] scsi 7:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 [37180.097760] sd 7:0:0:0: Attached scsi generic sg2 type 0 [37180.098213] sd 7:0:0:0: [sdc] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB) [37180.098929] sd 7:0:0:0: [sdc] Write Protect is off [37180.098937] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [37180.099390] sd 7:0:0:0: [sdc] Asking for cache data failed [37180.099397] sd 7:0:0:0: [sdc] Assuming drive cache: write through [37180.102111] sd 7:0:0:0: [sdc] Asking for cache data failed [37180.102122] sd 7:0:0:0: [sdc] Assuming drive cache: write through [37180.239952] sdc: sdc1 [37180.380337] sd 7:0:0:0: [sdc] Asking for cache data failed [37180.380349] sd 7:0:0:0: [sdc] Assuming drive cache: write through [37180.380355] sd 7:0:0:0: [sdc] Attached SCSI removable disk [37180.876420] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [40382.318493] hid-generic 0005:045E:0700.000C: unknown main item tag 0x0 [40382.318622] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/input24 [40382.318929] hid-generic 0005:045E:0700.000C: input,hidraw0: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 4C:EB:42:1A:52:01 [41609.462466] hid-generic 0005:045E:0762.000D: unknown main item tag 0x0 [41609.462817] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:40/input25 [41609.465346] hid-generic 0005:045E:0762.000D: input,hidraw1: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 4C:EB:42:1A:52:01 [41752.884146] sdc: detected capacity change from 8086618112 to 0 [41757.298110] usb 1-2: USB disconnect, device number 2
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at c2704000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c2709000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at c2700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: c2600000-c26fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c1600000-c25fffff Prefetchable memory behind bridge: 00000000c0500000-00000000c14fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: c1500000-c15fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at c2708000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 46 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 4094 [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4090 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at c2707000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at c2705000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4040 [size=32] 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008b] (rev 34) Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5315] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at c1601000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rts_pstor 03:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 16 Region 0: Memory at c1600000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 09:00.0 USB controller [0c03]: Fresco Logic Device [1b73:1009] (rev 02) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:1899] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at c1510000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at c1511000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: xhci_hcd
# dmidecode 2.11 SMBIOS 2.7 present. 39 structures occupying 1804 bytes. Table at 0x000E6060. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Hewlett-Packard Version: F.17 Release Date: 07/05/2012 ROM Size: 2560 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 15.23 Firmware Revision: 46.80 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: HP Folio 13 - 2000 Notebook PC Version: 0687100400204A00000330100 Serial Number: CND205L6SH UUID: 01847217-E138-E111-A830-B499BAF6578E Wake-up Type: Power Switch SKU Number: B0N00AA#ABD Family: 103C_5336AN G=N L=SMB B=HP S=FOL Handle 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Hewlett-Packard Product Name: 1899 Version: 46.80 Serial Number: PCRHFD2WV2ANXF Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Base Board Chassis Location Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 23 bytes Chassis Information Manufacturer: Hewlett-Packard Type: Notebook Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Chassis Asset Tag Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x0000004A Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: Not Specified Handle 0x0004, DMI type 9, 17 bytes System Slot Information Designation: J5C1 Type: x16 PCI Express x16 Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0005, DMI type 9, 17 bytes System Slot Information Designation: J6C1 Type: x4 PCI Express x4 Current Usage: In Use Length: Short ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0006, DMI type 9, 17 bytes System Slot Information Designation: J6C2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0007, DMI type 9, 17 bytes System Slot Information Designation: J6D2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0008, DMI type 9, 17 bytes System Slot Information Designation: J7C1 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x0009, DMI type 9, 17 bytes System Slot Information Designation: J7D2 Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x000A, DMI type 9, 17 bytes System Slot Information Designation: J8C2 Type: x16 PCI Express x16 Current Usage: In Use Length: Long ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1f.7 Handle 0x000B, DMI type 11, 5 bytes OEM Strings String 1: $HP$ String 2: LOC#ABD String 3: ABS 70/71 78 79 7A 7B String 4: CNB1 0687100400204A00000330100 String 5: HP_Mute_LED_P_G Handle 0x000C, DMI type 12, 5 bytes System Configuration Options Option 1: String1 for Type12 Equipment Manufacturer Handle 0x000D, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x000E, DMI type 21, 7 bytes Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 4 Handle 0x000F, DMI type 22, 26 bytes Portable Battery Location: Primary Manufacturer: 13-17 Name: Venturi Chemistry: Lithium Ion Design Capacity: 59940 mWh Design Voltage: 11100 mV SBDS Version: 1 Maximum Error: 1% SBDS Serial Number: 0525 SBDS Manufacture Date: 2012-01-24 OEM-specific Information: 0x0000FFFF Handle 0x0010, DMI type 26, 22 bytes Voltage Probe Description: Voltage Probe Description. Location: Unknown Status: Unknown Maximum Value: Unknown Minimum Value: Unknown Resolution: Unknown Tolerance: Unknown Accuracy: Unknown OEM-specific Information: 0x00000000 Nominal Value: Unknown Handle 0x0011, DMI type 27, 15 bytes Cooling Device Type: Fan Status: OK OEM-specific Information: 0x00000000 Nominal Speed: 2000 rpm Description: Cooling Device Description. Handle 0x0012, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0013, DMI type 39, 22 bytes System Power Supply Location: OEM_Define0 Name: OEM_Define1 Manufacturer: OEM_Define2 Serial Number: OEM_Define3 Asset Tag: OEM_Define4 Model Part Number: OEM_Define5 Revision: OEM_Define6 Max Power Capacity: 75 W Status: Present, OK Type: Regulator Input Voltage Range Switching: Auto-switch Plugged: No Hot Replaceable: No Cooling Device Handle: 0x0011 Handle 0x0014, DMI type 40, 18 bytes Additional Information 1 Referenced Handle: 0x0004 Referenced Offset: 0x05 String: PCIExpressx16 Value: 0xaa Additional Information 2 Referenced Handle: 0x0000 Referenced Offset: 0x05 String: Compiler Version: VC 9.0 Value: 0x05dc Handle 0x0015, DMI type 41, 11 bytes Onboard Device Reference Designation: Hanksville Gbe Lan Connection Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:01:00.0 Handle 0x0016, DMI type 136, 6 bytes OEM-specific Type Header and Data: 88 06 16 00 5A 5A Handle 0x0017, DMI type 129, 8 bytes OEM-specific Type Header and Data: 81 08 17 00 01 01 02 01 Strings: Intel_ASF Intel_ASF_001 Handle 0x0018, DMI type 130, 20 bytes OEM-specific Type Header and Data: 82 14 18 00 24 41 4D 54 01 01 01 01 01 A5 1F 02 00 00 00 00 Handle 0x0019, DMI type 131, 64 bytes OEM-specific Type Header and Data: 83 40 19 00 11 00 00 00 07 00 00 00 00 00 35 00 F8 00 49 1C FF FF FF FF 19 20 00 00 01 00 07 00 5F 04 14 00 80 00 BE AC C8 00 FF FF 00 00 00 05 8B 00 00 00 F6 00 00 00 76 50 72 6F 00 00 00 00 Handle 0x001A, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: No Error Number Of Devices: 1 Handle 0x001B, DMI type 17, 34 bytes Memory Device Array Handle: 0x001A Error Information Handle: 0x001C Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: Top Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Samsung Serial Number: 007093A2 Asset Tag: 0123456789 Part Number: M471B5273DH0-CK0 Rank: Unknown Configured Clock Speed: 666 MHz Handle 0x001C, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001D, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001F Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: 1 Handle 0x001E, DMI type 18, 23 bytes 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x001F, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x001A Partition Width: 1 Handle 0x0020, DMI type 41, 11 bytes Onboard Device Reference Designation: Intel Centrino Wireless-N 1030 Type: Other Status: Enabled Type Instance: 1 Bus Address: 0000:02:00.0 Handle 0x0021, DMI type 4, 42 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Core i5 Manufacturer: Intel(R) Corporation ID: A7 06 02 00 FF FB EB BF Signature: Type 0, Family 6, Model 42, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz Voltage: 0.0 V External Clock: 1333 MHz Max Speed: 4000 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0023 L2 Cache Handle: 0x0024 L3 Cache Handle: 0x0025 Serial Number: Not Specified Asset Tag: FFFF Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 4 Characteristics: 64-bit capable Handle 0x0022, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0023, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Through Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative Handle 0x0024, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through Location: Internal Installed Size: 256 kB Maximum Size: 256 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x0025, DMI type 7, 19 bytes Cache Information Socket Designation: L3 Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Through Location: Internal Installed Size: 3072 kB Maximum Size: 3072 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 12-way Set-associative Handle 0x0026, DMI type 127, 4 bytes End Of Table
Attachment:
acpidump.tar.gz
Description: application/compressed-tar