[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#690812: linux-image-3.2.0-0.bpo.3-686-pae: Kernel 3.2.0 reports bad dvd type from NEC DVD_RW ND-3540A drive



Package: src:linux
Version: 3.2.23-1~bpo60+2
Severity: important


*** Please type your report below this line ***
A lot of issue occurs from NEC DVD_RW ND-3540A drive with 3.2.0 kernel.
The last 2.6.32 kernel has not this issues (burning and reading).

A lot of DVD-R are unreadable. They are seen as DVD-RW instead of DVD-R.

I must say that with 2.6.32, the dvd are not recognized all the times.
Sometimes, I must open and close the tray one or two times before that
the dvd is recognized. But they are always seen, not with 3.2.0.

Same iso9660 dvd with photos in directories for the two kernels.
linux-image 3.2.0 :
dvd+rw-mediainfo /dev/sr0
INQUIRY:                [_NEC    ][DVD_RW ND-3540A ][1.01]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         14h, DVD-RW Sequential
 Media ID:              MCC 03RG20  
 Current Write Speed:   6.1x1385=8467KB/s
 Write Speed #0:        6.1x1385=8467KB/s
 Write Speed #1:        5.1x1385=7056KB/s
 Write Speed #2:        4.1x1385=5645KB/s
 Write Speed #3:        3.1x1385=4234KB/s
 Write Speed #4:        2.0x1385=2822KB/s
 Write Speed #5:        1.0x1385=1411KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     1.0x1385=1385KB/s@[0 -> 2297888]
:-( empty GET PERFORMACE descriptor
READ DVD STRUCTURE[#10h]:
 Media Book Type:       00h, DVD-ROM book [revision 0]
 Legacy lead-out at:    2298496*2KB=4707319808
READ DVD STRUCTURE[#0h]:
 Media Book Type:       25h, DVD-R book [revision 5]
 Last border-out at:    2045*2KB=4188160
READ DISC INFORMATION:
 Disc status:           complete
 Number of Sessions:    1
 State of Last Session: complete
 Number of Tracks:      1
READ FORMAT CAPACITIES:
 formatted:0*2048=0
 00h(800):2297888*2048=4706074624
 10h(10):2297888*2048=4706074624
 15h(10):2297888*2048=4706074624
READ TRACK INFORMATION[#1]:
 Track State:           complete,damaged
 Track Start Address:   0*2KB
 Free Blocks:           0*2KB
 Track Size:            1*2KB
FABRICATED TOC:
 Track#1  :             14@0
 Track#AA :             14@2297888
 Multi-session Info:    #1@0
READ CAPACITY:          0*2048=0

linux-image 2.6.32
dvd+rw-mediainfo /dev/sr0
INQUIRY:                [_NEC    ][DVD_RW ND-3540A ][1.01]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         11h, DVD-R Sequential
 Media ID:              MCC 03RG20  
 Current Write Speed:   6.1x1385=8467KB/s
 Write Speed #0:        6.1x1385=8467KB/s
 Write Speed #1:        5.1x1385=7056KB/s
 Write Speed #2:        4.1x1385=5645KB/s
 Write Speed #3:        3.1x1385=4234KB/s
 Write Speed #4:        2.0x1385=2822KB/s
 Write Speed #5:        1.0x1385=1411KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     6.6x1385=9141KB/s@0 ->
16.0x1385=22160KB/s@2251904 
 Speed Descriptor#0:    03/2251904
R@16.0x1385=22160KB/s W@16.0x1385=22160KB/s 
 Speed Descriptor#1: 03/2251904 R@12.0x1385=16620KB/s
 W@12.0x1385=16620KB/s
 Speed Descriptor#2:    00/2251904
 R@8.0x1385=11080KB/s W@8.0x1385=11080KB/s
 Speed Descriptor#3:
 00/2251904 R@8.0x1385=11080KB/s W@6.0x1385=8310KB/s
 Speed Descriptor#4:    00/2251904 R@5.0x1385=6925KB/s
 W@4.0x1385=5540KB/s 
 Speed Descriptor#5: 00/2251904 R@5.0x1385=6925KB/s
 W@2.0x1385=2770KB/s 
READ DVD STRUCTURE[#10h]: 
 Media Book Type: 00h, DVD-ROM book [revision 0] Legacy lead-out at:
 2298496*2KB=4707319808 
READ DVD STRUCTURE[#0h]: Media Book Type:
 D0h, unrecognized value Last border-out at:    2045*2KB=4188160
READ DISC INFORMATION:
 Disc status:           complete
 Number of Sessions:    1
 State of Last Session: complete
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           complete
 Track Start Address:   0*2KB
 Free Blocks:           0*2KB
 Track Size:            2251898*2KB
 Last Recorded Address: 2251897*2KB
FABRICATED TOC:
 Track#1  :             14@0
 Track#AA :             14@2251904
 Multi-session Info:    #1@0
READ CAPACITY:          2251898*2048=4611887104


-- Package-specific info:
** Version:
Linux version 3.2.0-0.bpo.3-686-pae (Debian 3.2.23-1~bpo60+2)
(debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) )
#1 SMP Thu Aug 23 08:21:41 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.3-686-pae
root=UUID=310f205d-4dfc-4293-966c-8b952c4d258b ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    5.429197] [drm] radeon: 64M of GTT memory ready.
[    5.452204] radeon 0000:01:00.0: WB disabled
[    5.453871] [drm] Loading R100 Microcode
[    5.493346] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald
Becker [    5.493428] via-rhine 0000:00:08.0: PCI INT A -> GSI 19
(level, low) -> IRQ 19 [    5.501075] 8139cp: 8139cp: 10/100 PCI
Ethernet driver v1.3 (Mar 22, 2004) [    5.502334] via-rhine
0000:00:08.0: eth0: VIA Rhine III at 0x1e800, 00:40:f4:75:0a:3d, IRQ 19
[    5.503048] via-rhine 0000:00:08.0: eth0: MII PHY found at address
1, status 0x7849 advertising 05e1 Link 0000 [    5.503103] 8139cp
0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip, use 8139too [    5.506274] 8139too: 8139too Fast Ethernet driver
0.9.28 [    5.506380] 8139too 0000:00:09.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16 [    5.507973] 8139too 0000:00:09.0: eth1: RealTek
RTL8139 at 0xe400, 00:16:0a:07:88:5f, IRQ 16 [    5.600443] usb 2-2:
New USB device found, idVendor=046d, idProduct=c01b [    5.600452] usb
2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.600457] usb 2-2: Product: USB-PS/2 Optical Mouse [    5.600461]
usb 2-2: Manufacturer: Logitech [    5.676248] firewire_core: created
device fw0: GUID 001106000000427d, S400 [    5.723775] [drm] radeon:
ring at 0x00000000E0001000 [    5.723802] [drm] ring test succeeded in
1 usecs [    5.725398] [drm] radeon: ib pool ready. [    5.725533]
[drm] ib test succeeded in 0 usecs [    5.727187] [drm] Radeon Display
Connectors [    5.727193] [drm] Connector 0: [    5.727196] [drm]   VGA
[    5.727201] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    5.727205] [drm]   Encoders:
[    5.727208] [drm]     CRT1: INTERNAL_DAC1
[    5.727212] [drm] Connector 1:
[    5.727215] [drm]   DVI-I
[    5.727217] [drm]   HPD1
[    5.727222] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    5.727225] [drm]   Encoders:
[    5.727228] [drm]     CRT2: INTERNAL_DAC2
[    5.727231] [drm]     DFP1: INTERNAL_TMDS1
[    5.727234] [drm] Connector 2:
[    5.727237] [drm]   S-video
[    5.727239] [drm]   Encoders:
[    5.727242] [drm]     TV1: INTERNAL_DAC2
[    5.995194] [drm] fb mappable at 0xD0040000
[    5.995201] [drm] vram apper at 0xD0000000
[    5.995205] [drm] size 3145728
[    5.995208] [drm] fb depth is 24
[    5.995211] [drm]    pitch is 4096
[    5.995623] fbcon: radeondrmfb (fb0) is primary device
[    6.158732] Console: switching to colour frame buffer device 128x48
[    6.175159] fb0: radeondrmfb frame buffer device
[    6.175163] drm: registered panic notifier
[    6.180508] [drm] Initialized radeon 2.12.0 20080528 for
0000:01:00.0 on minor 0 [    6.196129] sr0: scsi3-mmc drive: 48x/48x
writer cd/rw xa/form2 cdda tray [    6.196139] cdrom: Uniform CD-ROM
driver Revision: 3.20 [    6.198360] sr 1:0:0:0: Attached scsi CD-ROM
sr0 [    6.207080] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda
tray [    6.208306] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    6.436267] input: Logitech USB-PS/2 Optical Mouse
as /devices/pci0000:00/0000:00:11.2/usb2/2-2/2-2:1.0/input/input5
[    6.436747] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:11.2-2/input0 [    6.437415] usbcore: registered new
interface driver usbhid [    6.437420] usbhid: USB HID core driver
[    6.839614] snd_via82xx 0000:00:11.5: PCI INT C -> GSI 12 (level,
low) -> IRQ 12 [    6.839801] snd_via82xx 0000:00:11.5: setting latency
timer to 64 [    9.317023] Adding 1052252k swap on /dev/sda3.
Priority:-1 extents:1 across:1052252k [    9.362357] Adding 511996k
swap on /dev/sdb2.  Priority:-2 extents:1 across:511996k [    9.372477]
EXT4-fs (sdb1): re-mounted. Opts: (null) [    9.953052] EXT4-fs (sdb1):
re-mounted. Opts: errors=remount-ro [   10.114575] loop: module loaded
[   10.194340] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.201884] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   10.203871] sr 1:0:0:0: Attached scsi generic sg2 type 5
[   10.205943] sr 1:0:1:0: Attached scsi generic sg3 type 5
[   10.261262] w83627hf: w83627hf: Found W83627HF chip at 0x290
[   10.261328] ACPI: resource w83627hf [io  0x0295-0x0296] conflicts
with ACPI region HWMT [io 0x295-0x296] [   10.261333] ACPI: If an ACPI
driver is available for this device, you should use it instead of the
native driver [   13.722424] EXT4-fs (sdb3): mounted filesystem with
ordered data mode. Opts: (null) [   13.853781] EXT4-fs (sda1): mounted
filesystem with ordered data mode. Opts: (null) [   14.037367] EXT4-fs
(sda4): mounted filesystem with ordered data mode. Opts: (null)
[   14.197191] EXT4-fs (sdb4): mounted filesystem with ordered data
mode. Opts: (null) [   15.143747] ip_tables: (C) 2000-2006 Netfilter
Core Team [   15.211936] nf_conntrack version 0.5.0 (16158 buckets,
64632 max) [   15.655910] 8139too 0000:00:09.0: eth1: link up, 100Mbps,
full-duplex, lpa 0x41E1 [   18.252792] RPC: Registered named UNIX
socket transport module. [   18.252802] RPC: Registered udp transport
module. [   18.252805] RPC: Registered tcp transport module.
[   18.252809] RPC: Registered tcp NFSv4.1 backchannel transport
module. [   18.463654] FS-Cache: Loaded [   18.775547] FS-Cache: Netfs
'nfs' registered for caching [   18.878897] Installing knfsd (copyright
(C) 1996 okir@monad.swb.de). [   20.465393] via-rhine 0000:00:08.0:
eth0: link down [   20.465827] ADDRCONF(NETDEV_UP): eth0: link is not
ready [   26.456022] eth1: no IPv6 routers present [   28.285310] lp0:
using parport0 (interrupt-driven). [   28.394481] ppdev: user-space
parallel port driver [   72.848657] sshd (4224): /proc/4224/oom_adj is
deprecated, please use /proc/4224/oom_score_adj instead. [   76.309595]
vboxdrv: Found 1 processor cores. [   76.314921] vboxdrv: TSC mode is
'synchronous', kernel timer mode is 'normal'. [   76.314931] vboxdrv:
Successfully loaded version 4.0.16 (interface 0x00180000).
[  151.891254] 8139too 0000:00:09.0: eth1: link down [  153.491213]
8139too 0000:00:09.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[  154.179145] 8139too 0000:00:09.0: eth1: link down [  155.682711]
8139too 0000:00:09.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[  156.044667] 8139too 0000:00:09.0: eth1: link down [  157.538688]
8139too 0000:00:09.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1

** Model information
not available

** Loaded modules:
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
snd_hrtimer
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
ppdev
lp
xt_limit
xt_tcpudp
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
ipt_LOG
sunrpc
ipt_MASQUERADE
xt_DSCP
ipt_REJECT
nf_conntrack_irc
nf_conntrack_ftp
binfmt_misc
xt_state
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
iptable_mangle
iptable_filter
ip_tables
x_tables
hwmon_vid
sg
loop
firewire_sbp2
snd_via82xx
gameport
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
snd_pcm
usbhid
hid
snd_page_alloc
snd_mpu401_uart
sr_mod
cdrom
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
8139too
8139cp
via_rhine
mii
radeon
ttm
i2c_viapro
drm_kms_helper
drm
i2c_algo_bit
power_supply
snd_timer
snd_seq_device
floppy
ohci_hcd
i2c_core
firewire_ohci
via_ircc
uhci_hcd
snd
shpchp
evdev
pcspkr
soundcore
firewire_core
irda
crc_ccitt
ehci_hcd
parport_pc
parport
usbcore
button
processor
thermal_sys
usb_common
crc_itu_t
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
ata_generic
pata_via
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099] Subsystem: VIA Technologies, Inc. Device
[1106:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
INTx- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable)
[size=64M] Capabilities: <access denied>
	Kernel driver in use: agpgart-via

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode]) Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind
bridge: 0000a000-0000afff Memory behind bridge: dfe00000-dfefffff
	Prefetchable memory behind bridge: cfc00000-dfcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+
MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn- Capabilities: <access denied>

00:06.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI]) Subsystem: Packard Bell B.V. Device [1631:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfffd000 (32-bit,
non-prefetchable) [size=4K] Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:06.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI]) Subsystem: Packard Bell B.V. Device [1631:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18 Region 0: Memory at dfffe000 (32-bit,
non-prefetchable) [size=4K] Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:06.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev
04) (prog-if 20 [EHCI]) Subsystem: Packard Bell B.V. Device [1631:1600]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19 Region 0: Memory at dfffff00 (32-bit,
non-prefetchable) [size=256] Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10
[OHCI]) Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE
1394 OHCI Controller [1106:3044] Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache
Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory
at dffff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at
ec00 [size=128] Capabilities: <access denied> Kernel driver in use:
firewire_ohci

00:08.0 Ethernet controller [0200]: VIA Technologies, Inc.
VT6105/VT6106S [Rhine-III] [1106:3106] (rev 86) Subsystem: VIA
Technologies, Inc. VT6106S [Rhine-III] [1106:0105] Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+
FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A
routed to IRQ 19 Region 0: I/O ports at e800 [size=256] Region 1:
Memory at dffffe00 (32-bit, non-prefetchable) [size=256] Capabilities:
<access denied> Kernel driver in use: via-rhine

00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek
Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+
FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region
0: I/O ports at e400 [size=256] Region 1: Memory at dffffd00 (32-bit,
non-prefetchable) [size=256] Expansion ROM at dffc0000 [disabled]
[size=128K] Capabilities: <access denied>
	Kernel driver in use: 8139too

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA
Bridge [1106:3074] Subsystem: VIA Technologies, Inc. Device [1106:0000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 0 Capabilities: <access denied>

00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies,
Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
[1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type
3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170
(32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at
00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at
fc00 [size=16] Capabilities: <access denied> Kernel driver in use:
pata_via

00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem:
First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ
10 Region 4: I/O ports at d400 [size=32] Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem:
First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ
10 Region 4: I/O ports at d800 [size=32] Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem:
First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ
10 Region 4: I/O ports at dc00 [size=32] Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 10)
Subsystem: Avance Logic Inc. MSI K7T266 Pro2-RU (MSI-6380 v2) onboard
audio (Realtek/ALC 200/200P) [4005:4710] Control: I/O+ Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 12
Region 0: I/O ports at e000 [size=256] Capabilities: <access denied>
Kernel driver in use: snd_via82xx

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited RV100 QY [Sapphire Radeon VE 7000]
[174b:7112] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx- Latency: 64 (2000ns min), Cache Line Size: 32 bytes Interrupt:
pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit,
prefetchable) [size=128M] Region 1: I/O ports at a800 [size=256] Region
2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K] Expansion
ROM at dfec0000 [disabled] [size=128K] Capabilities: <access denied>
	Kernel driver in use: radeon


** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.6
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-0.bpo.3-686-pae (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-0.bpo.3-686-pae depends on:
ii  debconf [debconf-2.0]       1.5.36.1     Debian configuration
management sy ii  initramfs-tools [linux-init 0.99~bpo60+1 tools for
generating an initramfs ii  linux-base                  3.4~bpo60+1
Linux image base package ii  module-init-tools           3.12-2+b1
tools for managing Linux kernel mo

Versions of packages linux-image-3.2.0-0.bpo.3-686-pae recommends:
ii  firmware-linux-free           2.6.32-46  Binary firmware for
various driver pn  libc6-i686                    <none>     (no
description available)

Versions of packages linux-image-3.2.0-0.bpo.3-686-pae suggests:
pn  debian-kernel- <none>                    (no description available)
ii  extlinux       2:4.05+dfsg-2~bpo60+1     collection of boot loaders
(ext2/3 ii  grub-pc        1.98+20100804-14+squeeze1 GRand Unified
Bootloader, version pn  linux-doc-3.2  <none>                    (no
description available)

Versions of packages linux-image-3.2.0-0.bpo.3-686-pae is related to:
pn  firmware-atheros            <none>       (no description available)
pn  firmware-bnx2               <none>       (no description available)
pn  firmware-bnx2x              <none>       (no description available)
pn  firmware-brcm80211          <none>       (no description available)
pn  firmware-intelwimax         <none>       (no description available)
pn  firmware-ipw2x00            <none>       (no description available)
pn  firmware-ivtv               <none>       (no description available)
pn  firmware-iwlwifi            <none>       (no description available)
pn  firmware-libertas           <none>       (no description available)
ii  firmware-linux              0.35~bpo60+1 Binary firmware for
various driver ii  firmware-linux-nonfree      0.35~bpo60+1 Binary
firmware for various driver pn  firmware-myricom
<none>       (no description available) pn  firmware-netxen
<none>       (no description available) pn  firmware-qlogic
<none>       (no description available) ii  firmware-ralink
0.35~bpo60+1 Binary firmware for Ralink wireles ii
firmware-realtek            0.35~bpo60+1 Binary firmware for Realtek
wired pn  xen-hypervisor              <none>       (no description
available)

-- debconf information:
  linux-image-3.2.0-0.bpo.3-686-pae/postinst/ignoring-ramdisk:
  linux-image-3.2.0-0.bpo.3-686-pae/postinst/depmod-error-initrd-3.2.0-0.bpo.3-686-pae:
false
linux-image-3.2.0-0.bpo.3-686-pae/postinst/missing-firmware-3.2.0-0.bpo.3-686-pae:
linux-image-3.2.0-0.bpo.3-686-pae/prerm/removing-running-kernel-3.2.0-0.bpo.3-686-pae:
true


Reply to: