[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#690505: broken usb device breaks direct i/o even to non-usb drives



mailing list subscriber wrote:
> On Mon, Oct 15, 2012 at 4:28 AM, Jonathan Nieder <jrnieder@gmail.com> wrote:

>> If so, full "dmesg" output after reproducing it and running
>>
>>         echo w >/proc/sysrq-trigger
>>
>> would be very interesting.
>
> pasted here: http://paste.debian.net/200555/

Thanks.  Attached for reference.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=/dev/md0p2 ro nomodeset vga=normal drm=off inteldrmfb=off
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000defaffa0 (usable)
[    0.000000]  BIOS-e820: 00000000defaffa0 - 00000000defb2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000defb2000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq dc5800 Microtower/2820h, BIOS 786F2 v01.55 02/13/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x11c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EFFFF write-back
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0DF000000 mask FFF000000 uncachable
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 11C000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask FE0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000df000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdefaf max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f9bf0] f9bf0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000defaf000
[    0.000000]  0000000000 - 00dee00000 page 2M
[    0.000000]  00dee00000 - 00defaf000 page 4k
[    0.000000] kernel direct mapping tables up to defaf000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000011c000000
[    0.000000]  0100000000 - 011c000000 page 2M
[    0.000000] kernel direct mapping tables up to 11c000000 @ defa9000-defaf000
[    0.000000] RAMDISK: 3657a000 - 372b5000
[    0.000000] ACPI: RSDP 00000000000e6210 00014 (v00 COMPAQ)
[    0.000000] ACPI: RSDT 00000000defc2040 00040 (v01 HPQOEM SLIC-BPC 20090213      00000000)
[    0.000000] ACPI: FACP 00000000defc20e8 00074 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: DSDT 00000000defc245f 0A315 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000defc2000 00040
[    0.000000] ACPI: APIC 00000000defc215c 00084 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: ASF! 00000000defc21e0 00063 (v32 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: MCFG 00000000defc2243 0003C (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: TCPA 00000000defc227f 00032 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: SLIC 00000000defc22b1 00176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
[    0.000000] ACPI: HPET 00000000defc2427 00038 (v01 COMPAQ BEARLAKE 00000001      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000011c000000
[    0.000000] Initmem setup node 0 0000000000000000-000000011c000000
[    0.000000]   NODE_DATA [000000011bffb000 - 000000011bffffff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117600000-ffff88011affffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0011c000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000defaf
[    0.000000]     0: 0x00100000 -> 0x0011c000
[    0.000000] On node 0 totalpages: 1027902
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 894951 pages, LIFO batch:31
[    0.000000]   Normal zone: 1568 pages used for memmap
[    0.000000]   Normal zone: 113120 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xf808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000defaf000 - 00000000defb0000
[    0.000000] PM: Registered nosave memory: 00000000defb0000 - 00000000defb2000
[    0.000000] PM: Registered nosave memory: 00000000defb2000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
[    0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[    0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011bc00000 s82816 r8192 d23680 u524288
[    0.000000] pcpu-alloc: s82816 r8192 d23680 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011993
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=/dev/md0p2 ro nomodeset vga=normal drm=off inteldrmfb=off
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3963640k/4653056k available (3409k kernel code, 541448k absent, 147968k reserved, 3324k data, 572k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2659.940 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.88 BogoMIPS (lpj=10639760)
[    0.004084] pid_max: default: 32768 minimum: 301
[    0.004159] Security Framework initialized
[    0.004200] AppArmor: AppArmor disabled by boot time parameter
[    0.004534] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008695] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009710] Mount-cache hash table entries: 256
[    0.009865] Initializing cgroup subsys cpuacct
[    0.009907] Initializing cgroup subsys memory
[    0.009954] Initializing cgroup subsys devices
[    0.009994] Initializing cgroup subsys freezer
[    0.010033] Initializing cgroup subsys net_cls
[    0.010073] Initializing cgroup subsys blkio
[    0.010116] Initializing cgroup subsys perf_event
[    0.010182] CPU: Physical Processor ID: 0
[    0.010219] CPU: Processor Core ID: 0
[    0.010257] mce: CPU supports 6 MCE banks
[    0.010301] CPU0: Thermal monitoring enabled (TM2)
[    0.010342] using mwait in idle threads.
[    0.010769] ACPI: Core revision 20110623
[    0.016400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056156] CPU0: Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz stepping 06
[    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.148036] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148113] Brought up 2 CPUs
[    0.148150] Total of 2 processors activated (10639.86 BogoMIPS).
[    0.151015] devtmpfs: initialized
[    0.153867] PM: Registering ACPI NVS region at defaffa0 (8288 bytes)
[    0.153867] print_constraints: dummy: 
[    0.153867] NET: Registered protocol family 16
[    0.153867] ACPI: bus type pci registered
[    0.153867] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.153867] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.158925] PCI: Using configuration type 1 for base access
[    0.159518] bio: create slab <bio-0> at 0
[    0.159518] ACPI: Added _OSI(Module Device)
[    0.159518] ACPI: Added _OSI(Processor Device)
[    0.159518] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.159518] ACPI: Added _OSI(Processor Aggregator Device)
[    0.163298] ACPI: EC: Look up EC in DSDT
[    0.212061] ACPI: SSDT 00000000defcd368 003AC (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
[    0.212392] ACPI: Dynamic OEM Table Load:
[    0.212463] ACPI: SSDT           (null) 003AC (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
[    0.236041] ACPI: SSDT 00000000defcd1ec 0017C (v01 COMPAQ      CST 00000001 MSFT 0100000E)
[    0.236330] ACPI: Dynamic OEM Table Load:
[    0.236401] ACPI: SSDT           (null) 0017C (v01 COMPAQ      CST 00000001 MSFT 0100000E)
[    0.284198] ACPI: Interpreter enabled
[    0.284238] ACPI: (supports S0 S3 S4 S5)
[    0.284356] ACPI: Using IOAPIC for interrupt routing
[    0.288603] ACPI: No dock devices found.
[    0.288641] HEST: Table not found.
[    0.288678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.304258] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.304369] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880116e71808), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.304503] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.304595] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.304694] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305100] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff]
[    0.305156] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.305198] pci_root PNP0A08:00: host bridge window [io  0x1000-0x2fff]
[    0.305239] pci_root PNP0A08:00: host bridge window [io  0x3000-0x6fff]
[    0.306795] pci_root PNP0A08:00: host bridge window [io  0x7000-0xafff]
[    0.306837] pci_root PNP0A08:00: host bridge window [io  0xb000-0xffff]
[    0.306878] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.306933] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf3ffffff]
[    0.306988] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.307052] pci 0000:00:00.0: [8086:29d0] type 0 class 0x000600
[    0.307085] pci 0000:00:02.0: [8086:29d2] type 0 class 0x000300
[    0.307093] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[    0.307097] pci 0000:00:02.0: reg 14: [io  0x2240-0x2247]
[    0.307101] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[    0.307106] pci 0000:00:02.0: reg 1c: [mem 0xf0100000-0xf01fffff]
[    0.307135] pci 0000:00:03.0: [8086:29d4] type 0 class 0x000780
[    0.307146] pci 0000:00:03.0: reg 10: [mem 0xf02a5900-0xf02a590f 64bit]
[    0.307179] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.307182] pci 0000:00:03.0: PME# disabled
[    0.307216] pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200
[    0.307230] pci 0000:00:19.0: reg 10: [mem 0xf0280000-0xf029ffff]
[    0.307237] pci 0000:00:19.0: reg 14: [mem 0xf02a4000-0xf02a4fff]
[    0.307244] pci 0000:00:19.0: reg 18: [io  0x2100-0x211f]
[    0.307295] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.307298] pci 0000:00:19.0: PME# disabled
[    0.307313] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.307348] pci 0000:00:1a.0: reg 20: [io  0x2120-0x213f]
[    0.307390] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.307424] pci 0000:00:1a.1: reg 20: [io  0x2140-0x215f]
[    0.307467] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.307501] pci 0000:00:1a.2: reg 20: [io  0x2160-0x217f]
[    0.307551] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.307568] pci 0000:00:1a.7: reg 10: [mem 0xf02a5000-0xf02a53ff]
[    0.307643] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.307647] pci 0000:00:1a.7: PME# disabled
[    0.307667] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.307679] pci 0000:00:1b.0: reg 10: [mem 0xf02a0000-0xf02a3fff 64bit]
[    0.307734] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.307737] pci 0000:00:1b.0: PME# disabled
[    0.307753] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.307808] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.307811] pci 0000:00:1c.0: PME# disabled
[    0.307830] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.307886] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.307889] pci 0000:00:1c.1: PME# disabled
[    0.307911] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.307946] pci 0000:00:1d.0: reg 20: [io  0x2180-0x219f]
[    0.307988] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.308035] pci 0000:00:1d.1: reg 20: [io  0x21a0-0x21bf]
[    0.308078] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.308113] pci 0000:00:1d.2: reg 20: [io  0x21c0-0x21df]
[    0.308163] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.308180] pci 0000:00:1d.7: reg 10: [mem 0xf02a5400-0xf02a57ff]
[    0.308255] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.308259] pci 0000:00:1d.7: PME# disabled
[    0.308275] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.308327] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[    0.308392] pci 0000:00:1f.0: quirk: [io  0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[    0.308451] pci 0000:00:1f.0: quirk: [io  0xfa00-0xfa3f] claimed by ICH6 GPIO
[    0.308495] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[    0.308551] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[    0.308607] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[    0.308699] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
[    0.308712] pci 0000:00:1f.2: reg 10: [io  0x2248-0x224f]
[    0.308718] pci 0000:00:1f.2: reg 14: [io  0x2268-0x226b]
[    0.308724] pci 0000:00:1f.2: reg 18: [io  0x2250-0x2257]
[    0.308731] pci 0000:00:1f.2: reg 1c: [io  0x226c-0x226f]
[    0.308737] pci 0000:00:1f.2: reg 20: [io  0x2200-0x220f]
[    0.308743] pci 0000:00:1f.2: reg 24: [io  0x2210-0x221f]
[    0.308786] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[    0.308798] pci 0000:00:1f.5: reg 10: [io  0x2258-0x225f]
[    0.308805] pci 0000:00:1f.5: reg 14: [io  0x2270-0x2273]
[    0.308811] pci 0000:00:1f.5: reg 18: [io  0x2260-0x2267]
[    0.308817] pci 0000:00:1f.5: reg 1c: [io  0x2274-0x2277]
[    0.308824] pci 0000:00:1f.5: reg 20: [io  0x2220-0x222f]
[    0.308830] pci 0000:00:1f.5: reg 24: [io  0x2230-0x223f]
[    0.308894] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[    0.308968] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[    0.309041] pci 0000:07:04.0: [8086:1229] type 0 class 0x000200
[    0.309055] pci 0000:07:04.0: reg 10: [mem 0xf0300000-0xf0300fff pref]
[    0.309063] pci 0000:07:04.0: reg 14: [io  0x1100-0x111f]
[    0.309071] pci 0000:07:04.0: reg 18: [mem 0xf0000000-0xf00fffff]
[    0.309098] pci 0000:07:04.0: reg 30: [mem 0x00000000-0x000fffff pref]
[    0.309121] pci 0000:07:04.0: supports D1 D2
[    0.309122] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot
[    0.309126] pci 0000:07:04.0: PME# disabled
[    0.309159] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[    0.309203] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.309206] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.309211] pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.309213] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
[    0.309215] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.309217] pci 0000:00:1e.0:   bridge window [io  0x1000-0x2fff] (subtractive decode)
[    0.309219] pci 0000:00:1e.0:   bridge window [io  0x3000-0x6fff] (subtractive decode)
[    0.309221] pci 0000:00:1e.0:   bridge window [io  0x7000-0xafff] (subtractive decode)
[    0.309223] pci 0000:00:1e.0:   bridge window [io  0xb000-0xffff] (subtractive decode)
[    0.309225] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.309227] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
[    0.309230] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.309243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.309426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[    0.309477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[    0.309530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[    0.309721] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.309832] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880116e71808), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.309968] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.310066]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.310156] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.310266] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880116e71808), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.310401] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[    0.310500]  pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[    0.310557] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.321752] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.322022] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.322339] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.322607] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.322875] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.323143] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.323413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.323681] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.324047] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.324100] vgaarb: loaded
[    0.324134] vgaarb: bridge control possible 0000:00:02.0
[    0.324205] PCI: Using ACPI for IRQ routing
[    0.325394] PCI: pci_cache_line_size set to 64 bytes
[    0.325453] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.325455] reserve RAM buffer: 00000000defaffa0 - 00000000dfffffff 
[    0.325548] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.325592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.325717] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.328110] Switching to clocksource hpet
[    0.329755] pnp: PnP ACPI init
[    0.329800] ACPI: bus type pnp registered
[    0.330014] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
[    0.330016] pnp 00:00: [bus 00-ff]
[    0.330018] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.330020] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.330022] pnp 00:00: [io  0x1000-0x2fff window]
[    0.330024] pnp 00:00: [io  0x3000-0x6fff window]
[    0.330025] pnp 00:00: [io  0x7000-0xafff window]
[    0.330027] pnp 00:00: [io  0xb000-0xffff window]
[    0.330029] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.330031] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
[    0.330033] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.330071] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.330082] pnp 00:01: [io  0x00f0-0x00ff]
[    0.330088] pnp 00:01: [irq 13]
[    0.330111] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.330123] pnp 00:02: [io  0x0000-0x000f]
[    0.330126] pnp 00:02: [io  0x0080-0x008f]
[    0.330127] pnp 00:02: [io  0x00c0-0x00df]
[    0.330129] pnp 00:02: [dma 4]
[    0.330151] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.330160] pnp 00:03: [io  0x0070-0x0071]
[    0.330164] pnp 00:03: [irq 8]
[    0.330186] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.330195] pnp 00:04: [io  0x0061]
[    0.330217] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.330229] pnp 00:05: [irq 12]
[    0.330253] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.330263] pnp 00:06: [io  0x0060]
[    0.330264] pnp 00:06: [io  0x0064]
[    0.330268] pnp 00:06: [irq 1]
[    0.330291] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.330439] pnp 00:07: [irq 4]
[    0.330441] pnp 00:07: [io  0x03f8-0x03ff]
[    0.330502] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.330658] pnp 00:08: [irq 6]
[    0.330660] pnp 00:08: [dma 2]
[    0.330662] pnp 00:08: [io  0x03f0-0x03f5]
[    0.330664] pnp 00:08: [io  0x03f7]
[    0.330698] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.330740] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.330766] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.330775] pnp 00:0a: [io  0x004e-0x004f]
[    0.330777] pnp 00:0a: [io  0x0cb0-0x0cbb]
[    0.330778] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    0.330804] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.330838] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    0.330864] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.331029] pnp 00:0c: [io  0x0010-0x001f]
[    0.331031] pnp 00:0c: [io  0x0050-0x0053]
[    0.331032] pnp 00:0c: [io  0x0072-0x0077]
[    0.331034] pnp 00:0c: [io  0x0090-0x009f]
[    0.331082] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331093] pnp 00:0d: [io  0x0400-0x041f]
[    0.331094] pnp 00:0d: [io  0x0420-0x043f]
[    0.331096] pnp 00:0d: [io  0x0440-0x045f]
[    0.331097] pnp 00:0d: [io  0x0460-0x047f]
[    0.331099] pnp 00:0d: [io  0x0480-0x048f]
[    0.331101] pnp 00:0d: [io  0xf800-0xf81f]
[    0.331102] pnp 00:0d: [io  0xf820-0xf83f]
[    0.331104] pnp 00:0d: [io  0xf840-0xf85f]
[    0.331105] pnp 00:0d: [io  0xf860-0xf87f]
[    0.331107] pnp 00:0d: [io  0xfa00-0xfa3f]
[    0.331108] pnp 00:0d: [io  0xfc00-0xfc7f]
[    0.331110] pnp 00:0d: [io  0xfc80-0xfcff]
[    0.331111] pnp 00:0d: [io  0xfe00-0xfe7f]
[    0.331113] pnp 00:0d: [io  0xfe80-0xfeff]
[    0.331129] pnp 00:0d: disabling [io  0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.331190] pnp 00:0d: disabling [io  0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.331250] pnp 00:0d: disabling [io  0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.331310] pnp 00:0d: disabling [io  0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.331411] system 00:0d: [io  0x0400-0x041f] has been reserved
[    0.331452] system 00:0d: [io  0x0420-0x043f] has been reserved
[    0.331492] system 00:0d: [io  0x0440-0x045f] has been reserved
[    0.331533] system 00:0d: [io  0x0460-0x047f] has been reserved
[    0.331574] system 00:0d: [io  0x0480-0x048f] has been reserved
[    0.331614] system 00:0d: [io  0xfa00-0xfa3f] has been reserved
[    0.331655] system 00:0d: [io  0xfc00-0xfc7f] has been reserved
[    0.331695] system 00:0d: [io  0xfc80-0xfcff] has been reserved
[    0.331736] system 00:0d: [io  0xfe00-0xfe7f] has been reserved
[    0.331777] system 00:0d: [io  0xfe80-0xfeff] has been reserved
[    0.331818] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331837] pnp 00:0e: [io  0x04d0-0x04d1]
[    0.331882] system 00:0e: [io  0x04d0-0x04d1] has been reserved
[    0.331889] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.332172] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[    0.332175] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[    0.332177] pnp 00:0f: [mem 0x000e4000-0x000fffff]
[    0.332178] pnp 00:0f: [mem 0xfec01000-0xfecfffff]
[    0.332180] pnp 00:0f: [mem 0xfed00400-0xfed3ffff]
[    0.332182] pnp 00:0f: [mem 0xfed45000-0xffffffff]
[    0.332183] pnp 00:0f: [mem 0xf4000000-0xf7ffffff]
[    0.332185] pnp 00:0f: [mem 0x000cb400-0x000e3fff]
[    0.332202] pnp 00:0f: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:07:04.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[    0.332267] pnp 00:0f: disabling [mem 0x000e4000-0x000fffff] because it overlaps 0000:07:04.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[    0.332330] pnp 00:0f: disabling [mem 0x000cb400-0x000e3fff] because it overlaps 0000:07:04.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[    0.332432] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.332475] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved
[    0.332517] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved
[    0.332559] system 00:0f: [mem 0xfed45000-0xffffffff] has been reserved
[    0.332601] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.332643] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.332654] pnp: PnP ACPI: found 16 devices
[    0.332690] ACPI: ACPI bus type pnp unregistered
[    0.339342] PCI: max bus depth: 1 pci_try_num: 2
[    0.339366] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[    0.339410] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.339467] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.339508] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[    0.339551] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.339607] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.339649] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[    0.339688] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.339731] pci 0000:00:1c.0:   bridge window [mem 0xf8400000-0xf85fffff]
[    0.339774] pci 0000:00:1c.0:   bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.339832] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[    0.339872] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.339914] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf81fffff]
[    0.339958] pci 0000:00:1c.1:   bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.340033] pci 0000:07:04.0: BAR 6: assigned [mem 0xf8800000-0xf88fffff pref]
[    0.340088] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[    0.340127] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.340170] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.340213] pci 0000:00:1e.0:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.340276] pci 0000:00:1c.0: setting latency timer to 64
[    0.340286] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.340329] pci 0000:00:1c.1: setting latency timer to 64
[    0.340334] pci 0000:00:1e.0: setting latency timer to 64
[    0.340336] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff]
[    0.340338] pci_bus 0000:00: resource 5 [io  0x0000-0x0cf7]
[    0.340340] pci_bus 0000:00: resource 6 [io  0x1000-0x2fff]
[    0.340342] pci_bus 0000:00: resource 7 [io  0x3000-0x6fff]
[    0.340344] pci_bus 0000:00: resource 8 [io  0x7000-0xafff]
[    0.340345] pci_bus 0000:00: resource 9 [io  0xb000-0xffff]
[    0.340347] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[    0.340349] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
[    0.340351] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.340353] pci_bus 0000:20: resource 0 [io  0x4000-0x4fff]
[    0.340355] pci_bus 0000:20: resource 1 [mem 0xf8400000-0xf85fffff]
[    0.340357] pci_bus 0000:20: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.340359] pci_bus 0000:30: resource 0 [io  0x3000-0x3fff]
[    0.340361] pci_bus 0000:30: resource 1 [mem 0xf8000000-0xf81fffff]
[    0.340363] pci_bus 0000:30: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.340365] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.340367] pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf00fffff]
[    0.340369] pci_bus 0000:07: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
[    0.340370] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff]
[    0.340372] pci_bus 0000:07: resource 5 [io  0x0000-0x0cf7]
[    0.340374] pci_bus 0000:07: resource 6 [io  0x1000-0x2fff]
[    0.340376] pci_bus 0000:07: resource 7 [io  0x3000-0x6fff]
[    0.340377] pci_bus 0000:07: resource 8 [io  0x7000-0xafff]
[    0.340379] pci_bus 0000:07: resource 9 [io  0xb000-0xffff]
[    0.340381] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[    0.340383] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff]
[    0.340385] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.340427] NET: Registered protocol family 2
[    0.340584] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.341529] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.344744] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.345265] TCP: Hash tables configured (established 524288 bind 65536)
[    0.345307] TCP reno registered
[    0.345350] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.345426] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.345607] NET: Registered protocol family 1
[    0.345663] pci 0000:00:02.0: Boot video device
[    0.345687] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.345743] pci 0000:00:1a.0: PCI INT A disabled
[    0.345786] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.345840] pci 0000:00:1a.1: PCI INT B disabled
[    0.345886] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.345940] pci 0000:00:1a.2: PCI INT C disabled
[    0.345984] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.346047] pci 0000:00:1a.7: PCI INT C disabled
[    0.346096] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.346150] pci 0000:00:1d.0: PCI INT A disabled
[    0.346194] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.346247] pci 0000:00:1d.1: PCI INT B disabled
[    0.346291] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.346344] pci 0000:00:1d.2: PCI INT C disabled
[    0.346388] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.346444] pci 0000:00:1d.7: PCI INT A disabled
[    0.346502] pci 0000:07:04.0: Firmware left e100 interrupts enabled; disabling
[    0.346559] PCI: CLS 64 bytes, default 64
[    0.346607] Unpacking initramfs...
[    0.597559] Freeing initrd memory: 13548k freed
[    0.601462] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.601509] Placing 64MB software IO TLB between ffff8800dafa9000 - ffff8800defa9000
[    0.601564] software IO TLB at phys 0xdafa9000 - 0xdefa9000
[    0.602060] audit: initializing netlink socket (disabled)
[    0.602117] type=2000 audit(1350269989.596:1): initialized
[    0.627110] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.644753] VFS: Disk quotas dquot_6.5.2
[    0.644822] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.644930] msgmni has been set to 7767
[    0.645104] alg: No test for stdrng (krng)
[    0.645166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.645223] io scheduler noop registered
[    0.645259] io scheduler deadline registered
[    0.645306] io scheduler cfq registered (default)
[    0.645420] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.645454] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.645509] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.645539] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.645611] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.645672] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.645713] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.646044] intel_idle: does not run on family 6 model 23
[    0.646066] ERST: Table is not found!
[    0.646103] GHES: HEST is not enabled!
[    0.646195] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.666573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.732548] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.748264] Linux agpgart interface v0.103
[    0.748367] agpgart-intel 0000:00:00.0: Intel Q33 Chipset
[    0.748462] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.749779] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.749941] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.750108] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    0.752857] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.752901] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.754634] mousedev: PS/2 mouse device common for all mice
[    0.754716] rtc_cmos 00:03: RTC can wake from S4
[    0.754847] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.754908] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.754959] cpuidle: using governor ladder
[    0.754995] cpuidle: using governor menu
[    0.755199] TCP cubic registered
[    0.755267] NET: Registered protocol family 10
[    0.755695] Mobile IPv6
[    0.755730] NET: Registered protocol family 17
[    0.755769] Registering the dns_resolver key type
[    0.755920] PM: Hibernation image not present or could not be loaded.
[    0.755929] registered taskstats version 1
[    0.764972] rtc_cmos 00:03: setting system clock to 2012-10-15 02:59:49 UTC (1350269989)
[    0.765066] Initializing network drop monitor service
[    0.766255] Freeing unused kernel memory: 572k freed
[    0.766385] Write protecting the kernel read-only data: 6144k
[    0.768702] Freeing unused kernel memory: 668k freed
[    0.771092] Freeing unused kernel memory: 684k freed
[    0.779896] udevd[49]: starting version 175
[    0.794401] usbcore: registered new interface driver usbfs
[    0.794467] usbcore: registered new interface driver hub
[    0.806821] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    0.806866] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    0.806951] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.807010] e1000e 0000:00:19.0: setting latency timer to 64
[    0.807095] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    0.810449] SCSI subsystem initialized
[    0.818822] usbcore: registered new device driver usb
[    0.819212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.822134] libata version 3.00 loaded.
[    0.838216] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.838266] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.838600] e100 0000:07:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.840782] uhci_hcd: USB Universal Host Controller Interface driver
[    0.863198] FDC 0 is a post-1991 82077
[    0.863597] e100 0000:07:04.0: PME# disabled
[    0.864497] e100 0000:07:04.0: eth0: addr 0xf0300000, irq 20, MAC addr 00:90:27:51:7d:77
[    1.134171] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1f:29:51:99:f4
[    1.134229] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[    1.134290] e1000e 0000:00:19.0: eth1: MAC: 7, PHY: 6, PBA No: 1042FF-0FF
[    1.134364] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.134426] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.134430] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.134493] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.134579] ehci_hcd 0000:00:1a.7: debug port 1
[    1.138507] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.138524] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf02a5000
[    1.152011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.152089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.152138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.152192] usb usb1: Product: EHCI Host Controller
[    1.152231] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[    1.152271] usb usb1: SerialNumber: 0000:00:1a.7
[    1.152403] hub 1-0:1.0: USB hub found
[    1.152444] hub 1-0:1.0: 6 ports detected
[    1.152549] ata_piix 0000:00:1f.2: version 2.13
[    1.152564] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.152611] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    1.308024] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.308250] scsi0 : ata_piix
[    1.308362] scsi1 : ata_piix
[    1.308498] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2200 irq 14
[    1.308542] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2208 irq 15
[    1.308600] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.308644] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.464016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    1.464025] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.464240] scsi2 : ata_piix
[    1.464353] scsi3 : ata_piix
[    1.464469] ata3: SATA max UDMA/133 cmd 0x2258 ctl 0x2270 bmdma 0x2220 irq 18
[    1.464514] ata4: SATA max UDMA/133 cmd 0x2260 ctl 0x2274 bmdma 0x2228 irq 18
[    1.464574] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.464625] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.464628] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.464672] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.464754] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
[    1.464821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.464864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.464919] usb usb2: Product: UHCI Host Controller
[    1.464957] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.464997] usb usb2: SerialNumber: 0000:00:1a.0
[    1.465147] hub 2-0:1.0: USB hub found
[    1.465188] hub 2-0:1.0: 2 ports detected
[    1.465281] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.465332] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.465334] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.465377] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    1.465459] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
[    1.465524] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.465567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.465621] usb usb3: Product: UHCI Host Controller
[    1.465659] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.465700] usb usb3: SerialNumber: 0000:00:1a.1
[    1.465865] hub 3-0:1.0: USB hub found
[    1.465904] hub 3-0:1.0: 2 ports detected
[    1.465996] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.466043] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.466046] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.466089] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[    1.466162] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002160
[    1.466227] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.466270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.466324] usb usb4: Product: UHCI Host Controller
[    1.466363] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.466403] usb usb4: SerialNumber: 0000:00:1a.2
[    1.466963] hub 4-0:1.0: USB hub found
[    1.467003] hub 4-0:1.0: 2 ports detected
[    1.467095] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.467144] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.467146] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.467192] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.467268] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002180
[    1.467336] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.467379] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.467435] usb usb5: Product: UHCI Host Controller
[    1.467474] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.467515] usb usb5: SerialNumber: 0000:00:1d.0
[    1.468130] hub 5-0:1.0: USB hub found
[    1.468183] hub 5-0:1.0: 2 ports detected
[    1.468279] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.468327] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.468329] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.468373] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.468447] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000021a0
[    1.468512] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.468555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.468610] usb usb6: Product: UHCI Host Controller
[    1.468648] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.468689] usb usb6: SerialNumber: 0000:00:1d.1
[    1.468865] hub 6-0:1.0: USB hub found
[    1.468904] hub 6-0:1.0: 2 ports detected
[    1.469075] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.469132] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.469135] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.469179] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    1.469254] ehci_hcd 0000:00:1d.7: debug port 1
[    1.473169] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.473318] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf02a5400
[    1.588014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.588073] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.588123] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588178] usb usb7: Product: EHCI Host Controller
[    1.588216] usb usb7: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[    1.588257] usb usb7: SerialNumber: 0000:00:1d.7
[    1.588379] hub 7-0:1.0: USB hub found
[    1.588419] hub 7-0:1.0: 6 ports detected
[    1.588631] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.588679] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.588681] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.588726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.588802] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021c0
[    1.588869] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.588912] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588967] usb usb8: Product: UHCI Host Controller
[    1.589006] usb usb8: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
[    1.589046] usb usb8: SerialNumber: 0000:00:1d.2
[    1.589164] hub 8-0:1.0: USB hub found
[    1.589203] hub 8-0:1.0: 2 ports detected
[    1.600014] Refined TSC clocksource calibration: 2659.999 MHz.
[    1.600060] Switching to clocksource tsc
[    1.600359] usb 1-4: New USB device found, idVendor=9710, idProduct=7830
[    1.600404] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.600449] usb 1-4: Product: USB-MAC Controller   
[    1.600494] usb 1-4: Manufacturer: Moschip Semiconductor
[    1.600533] usb 1-4: SerialNumber: 3b120555
[    1.638631] ata2: SATA link down (SStatus 0 SControl 300)
[    1.784100] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.794607] ata3: SATA link down (SStatus 0 SControl 300)
[    1.794804] ata1.00: ATAPI: HL-DT-ST DVD-RAM GSA-H60L, R90C, max UDMA/100
[    1.808122] ata1.00: configured for UDMA/100
[    1.908011] usb 7-2: new high-speed USB device number 2 using ehci_hcd
[    1.923148] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H60L R90C PQ: 0 ANSI: 5
[    1.940044] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.948333] ata4.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    1.948376] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.964363] ata4.00: configured for UDMA/133
[    1.966054] scsi 3:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.969797] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.969899] sd 3:0:0:0: [sda] Write Protect is off
[    1.969940] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.969959] sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.991208]  sda: sda1 sda2 sda3 sda4
[    1.991546] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.992697] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.992769] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.030186] device-mapper: uevent: version 1.0.3
[    2.030273] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.053140] usb 7-2: New USB device found, idVendor=0b95, idProduct=772a
[    2.053186] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.053232] usb 7-2: Product: AX88x72A
[    2.053274] usb 7-2: Manufacturer: ASIX Elec. Corp.
[    2.053313] usb 7-2: SerialNumber: 000002
[    2.105888] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.105954] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.106111] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.832336] md: md0 stopped.
[    3.833761] md: bind<sda>
[    3.834709] md: raid1 personality registered for level 1
[    3.834904] bio: create slab <bio-1> at 1
[    3.834993] md/raid1:md0: active with 1 out of 2 mirrors
[    3.846248] created bitmap (8 pages) for device md0
[    3.846699] md0: bitmap initialized from disk: read 1/1 pages, set 898 of 14905 bits
[    3.874926] md0: detected capacity change from 0 to 1000204746752
[    3.876075]  md0: p1 p2 p3 p4
[    4.148282] PM: Starting manual resume from disk
[    4.148334] PM: Hibernation image partition 259:2 present
[    4.148335] PM: Looking for hibernation image.
[    4.148505] PM: Image not found (code -22)
[    4.148507] PM: Hibernation image not present or could not be loaded.
[    4.187571] EXT4-fs (md0p2): orphan cleanup on readonly fs
[    4.200661] EXT4-fs (md0p2): ext4_orphan_cleanup: deleting unreferenced inode 1308725
[    4.230162] EXT4-fs (md0p2): ext4_orphan_cleanup: deleting unreferenced inode 1308482
[    4.238953] EXT4-fs (md0p2): 2 orphan inodes deleted
[    4.238995] EXT4-fs (md0p2): recovery complete
[    4.470594] EXT4-fs (md0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.758207] udevd[389]: starting version 175
[    6.013012] wmi: Mapper loaded
[    6.020549] iTCO_vendor_support: vendor-support=0
[    6.032920] ACPI: Requesting acpi_cpufreq
[    6.033175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    6.033236] ACPI: Power Button [PBTN]
[    6.033726] Marking TSC unstable due to TSC halts in idle
[    6.033774] ACPI: acpi_idle registered with cpuidle
[    6.033856] Switching to clocksource hpet
[    6.034190] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    6.034258] ACPI: Power Button [PWRF]
[    6.035869] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.035990] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0xf860)
[    6.036122] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.137046] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    6.257613] usb 1-4: applying rev.C fixup
[    6.264117] usb 1-4: applying rev.C fixup
[    6.273064] MOSCHIP usb-ethernet driver 1-4:1.0: eth2: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:1a.7-4, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:12:05:55
[    6.273163] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    6.336674] [drm] Initialized drm 1.1.0 20060810
[    6.376128] input: HP WMI hotkeys as /devices/virtual/input/input3
[    6.385501] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[    6.408425] udevd[446]: renamed network interface eth1 to eth5
[    6.420424] udevd[450]: renamed network interface eth0 to eth1
[    6.425203] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.425248] pci 0000:00:02.0: setting latency timer to 64
[    6.450453] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    6.450510] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    6.450822] pci 0000:00:02.0: irq 43 for MSI/MSI-X
[    6.450827] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.450868] [drm] No driver support for vblank timestamp query.
[    6.460180] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1147)
[    6.460322] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    6.460423] ACPI: Video Device [GFX0] (multi-head: no  rom: yes  post: no)
[    6.460491] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.556396] udevd[434]: renamed network interface eth2 to eth0
[    6.657350] asix 7-2:1.0: eth2: register 'asix' at usb-0000:00:1d.7-2, ASIX AX88772 USB 2.0 Ethernet, 00:80:8c:8e:2a:8c
[    6.657434] usbcore: registered new interface driver asix
[    6.665608] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.665708] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    6.665729] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.755905] Error: Driver 'pcspkr' is already registered, aborting...
[    7.068079] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[    7.130253] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    8.460473] ata4.00: configured for UDMA/133
[    8.460515] ata4: EH complete
[    8.885818] Adding 2055164k swap on /dev/md0p3.  Priority:-1 extents:1 across:2055164k 
[    8.898597] EXT4-fs (md0p2): re-mounted. Opts: (null)
[    9.197584] EXT4-fs (md0p2): re-mounted. Opts: (null)
[    9.302356] loop: module loaded
[    9.483253] smsc47b397: found SMSC SCH5317 (base address 0x0480, revision 1)
[   11.781545] e1000e 0000:00:19.0: eth5: changing MTU from 1500 to 9000
[   11.983040] Bridge firewalling registered
[   12.358074] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   12.412072] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   12.412728] ADDRCONF(NETDEV_UP): eth5: link is not ready
[   12.430241] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   12.432267] e100 0000:07:04.0: eth1: NIC Link is Up 100 Mbps Full Duplex
[   12.432976] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   12.464893] device eth2 entered promiscuous mode
[   13.266931] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   13.269239] ADDRCONF(NETDEV_UP): br0: link is not ready
[   13.382822] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   13.384033] br0: port 1(eth2) entering forwarding state
[   13.384079] br0: port 1(eth2) entering forwarding state
[   13.384664] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   13.385397] asix 7-2:1.0: eth2: link down
[   13.428584] br0: port 1(eth2) entering forwarding state
[   15.048276] br0: port 1(eth2) entering forwarding state
[   15.048326] br0: port 1(eth2) entering forwarding state
[   15.050400] asix 7-2:1.0: eth2: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   15.312814] fuse init (API version 7.17)
[   15.520854] e1000e: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   15.521371] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[   15.695500] Loading iSCSI transport class v2.0-870.
[   15.714250] iscsi: registered transport (tcp)
[   15.762050] iscsi: registered transport (iser)
[   16.440799] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.624503] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.468040] device br0 entered promiscuous mode
[   17.826070] iSCSI Enterprise Target Software - version 1.4.20.3
[   17.826155] iscsi_trgt: Registered io type fileio
[   17.826199] iscsi_trgt: Registered io type blockio
[   17.826239] iscsi_trgt: Registered io type nullio
[   18.865202] Ebtables v2.0 registered
[   19.183144] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   26.638950] tun: Universal TUN/TAP device driver, 1.6
[   26.639018] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   29.124430] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96)
[   29.124488] drbd: srcversion: 2D876214BAAD53B31ADC1D6 
[   29.124527] drbd: registered as block device major 147
[   29.124567] drbd: minor_table @ 0xffff88011404f180
[   30.842513] Bluetooth: Core ver 2.16
[   30.842567] NET: Registered protocol family 31
[   30.842612] Bluetooth: HCI device and connection manager initialized
[   30.842660] Bluetooth: HCI socket layer initialized
[   30.842705] Bluetooth: L2CAP socket layer initialized
[   30.842753] Bluetooth: SCO socket layer initialized
[   30.850102] PPP generic driver version 2.4.2
[   30.992431] NET: Registered protocol family 24
[ 6181.200042] usb 7-3: new high-speed USB device number 3 using ehci_hcd
[ 6181.499869] usb 7-3: New USB device found, idVendor=0011, idProduct=7788
[ 6181.499916] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6181.499963] usb 7-3: Product: Mass Storage
[ 6181.500014] usb 7-3: Manufacturer: Generic
[ 6181.500063] usb 7-3: SerialNumber: BEF961F3
[ 6181.529527] usbcore: registered new interface driver uas
[ 6181.543351] Initializing USB Mass Storage driver...
[ 6181.543460] scsi4 : usb-storage 7-3:1.0
[ 6181.543561] usbcore: registered new interface driver usb-storage
[ 6181.543605] USB Mass Storage support registered.
[ 6182.542025] scsi 4:0:0:0: Direct-Access     Generic  Flash Disk       8.00 PQ: 0 ANSI: 2
[ 6182.542694] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6182.544131] sd 4:0:0:0: [sdb] 270336000 512-byte logical blocks: (138 GB/128 GiB)
[ 6182.545030] sd 4:0:0:0: [sdb] Write Protect is off
[ 6182.545075] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6182.545628] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6182.545674] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6182.548882] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6182.548927] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6182.582635]  sdb: unknown partition table
[ 6182.585256] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6182.585301] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6182.585351] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6704.466519] EXT4-fs (sdb1): no journal found
[ 6898.089608] SysRq : Show Blocked State
[ 6898.089673]   task                        PC stack   pid father
[ 6898.089739] usb-storage     D ffff88011bc93740     0  8089      2 0x00000000
[ 6898.089820]  ffff880113656ee0 0000000000000046 ffff880100000000 ffff880116f080c0
[ 6898.089948]  0000000000013740 ffff880008b95fd8 ffff880008b95fd8 ffff880113656ee0
[ 6898.090075]  0000000000000000 0000000181349974 ffff880100000000 7fffffffffffffff
[ 6898.090202] Call Trace:
[ 6898.090241]  [<ffffffff81349e3e>] ? schedule_timeout+0x2c/0xdb
[ 6898.090307]  [<ffffffffa000ceb2>] ? usb_hcd_map_urb_for_dma+0x157/0x275 [usbcore]
[ 6898.090365]  [<ffffffff81349a84>] ? wait_for_common+0xa0/0x119
[ 6898.090408]  [<ffffffff8103f48f>] ? try_to_wake_up+0x197/0x197
[ 6898.090456]  [<ffffffffa000ea5c>] ? usb_sg_wait+0xf8/0x10e [usbcore]
[ 6898.090501]  [<ffffffffa059e03a>] ? usb_stor_bulk_transfer_sglist+0x84/0xd1 [usb_storage]
[ 6898.090560]  [<ffffffffa059e0a4>] ? usb_stor_bulk_srb+0x1d/0x2d [usb_storage]
[ 6898.090605]  [<ffffffffa059e1ad>] ? usb_stor_Bulk_transport+0xf9/0x261 [usb_storage]
[ 6898.090664]  [<ffffffff81349e3e>] ? schedule_timeout+0x2c/0xdb
[ 6898.090707]  [<ffffffffa059e7f9>] ? usb_stor_invoke_transport+0x2f/0x3be [usb_storage]
[ 6898.090767]  [<ffffffff8103adcb>] ? ttwu_do_wakeup+0x50/0xc4
[ 6898.090809]  [<ffffffff8103a2a9>] ? signal_pending_state+0x1f/0x40
[ 6898.090852]  [<ffffffff8134ad0a>] ? _raw_spin_lock_irq+0xa/0x14
[ 6898.090895]  [<ffffffff81349aed>] ? wait_for_common+0x109/0x119
[ 6898.090937]  [<ffffffff8103f48f>] ? try_to_wake_up+0x197/0x197
[ 6898.090979]  [<ffffffff81036457>] ? should_resched+0x5/0x23
[ 6898.091022]  [<ffffffffa059f898>] ? usb_stor_control_thread+0x144/0x21c [usb_storage]
[ 6898.091081]  [<ffffffffa059f754>] ? fill_inquiry_response+0xde/0xde [usb_storage]
[ 6898.091140]  [<ffffffff8105efad>] ? kthread+0x76/0x7e
[ 6898.091182]  [<ffffffff81351df4>] ? kernel_thread_helper+0x4/0x10
[ 6898.091225]  [<ffffffff8105ef37>] ? kthread_worker_fn+0x139/0x139
[ 6898.091268]  [<ffffffff81351df0>] ? gs_change+0x13/0x13
[ 6898.091308] flush-8:16      D ffff88011bc13740     0  8171      2 0x00000000
[ 6898.091388]  ffff880113ba7790 0000000000000046 0000000000000000 ffffffff8160d020
[ 6898.091516]  0000000000013740 ffff88010965ffd8 ffff88010965ffd8 ffff880113ba7790
[ 6898.091644]  ffff88010965f850 000000010965f850 ffff880113439440 ffff88011bc13f90
[ 6898.091772] Call Trace:
[ 6898.091808]  [<ffffffff81349c24>] ? io_schedule+0x59/0x71
[ 6898.091850]  [<ffffffff81197eef>] ? get_request_wait+0x105/0x18f
[ 6898.091894]  [<ffffffff8105f5f3>] ? add_wait_queue+0x3c/0x3c
[ 6898.091936]  [<ffffffff81198e44>] ? blk_queue_bio+0x17f/0x28b
[ 6898.091978]  [<ffffffff8119797b>] ? generic_make_request+0x90/0xcf
[ 6898.092021]  [<ffffffff81197a8d>] ? submit_bio+0xd3/0xf1
[ 6898.092063]  [<ffffffff8111fb82>] ? bio_alloc_bioset+0x43/0xb6
[ 6898.092105]  [<ffffffff8111bb30>] ? submit_bh+0xe2/0xff
[ 6898.092147]  [<ffffffff8111ceef>] ? __block_write_full_page+0x1ee/0x2d5
[ 6898.092191]  [<ffffffff8111e70b>] ? bit_spin_lock.constprop.30+0x22/0x22
[ 6898.092234]  [<ffffffff811211e3>] ? blkdev_get_blocks+0x83/0x83
[ 6898.093222]  [<ffffffff810bb686>] ? __writepage+0xa/0x21
[ 6898.093222]  [<ffffffff810bb50e>] ? write_cache_pages+0x1f8/0x2e9
[ 6898.093222]  [<ffffffff810bb67c>] ? set_page_dirty_lock+0x2b/0x2b
[ 6898.093222]  [<ffffffff810bb639>] ? generic_writepages+0x3a/0x52
[ 6898.093222]  [<ffffffff81117196>] ? writeback_single_inode+0x124/0x2d3
[ 6898.093222]  [<ffffffff81117616>] ? writeback_sb_inodes+0x16b/0x204
[ 6898.093222]  [<ffffffff8111771c>] ? __writeback_inodes_wb+0x6d/0xab
[ 6898.093222]  [<ffffffff81117882>] ? wb_writeback+0x128/0x21f
[ 6898.093222]  [<ffffffff810bb987>] ? determine_dirtyable_memory+0x10/0x17
[ 6898.093222]  [<ffffffff81117d88>] ? wb_do_writeback+0x189/0x1a8
[ 6898.093222]  [<ffffffff81117e2b>] ? bdi_writeback_thread+0x84/0x1e5
[ 6898.093222]  [<ffffffff81117da7>] ? wb_do_writeback+0x1a8/0x1a8
[ 6898.093222]  [<ffffffff8105efad>] ? kthread+0x76/0x7e
[ 6898.093222]  [<ffffffff81351df4>] ? kernel_thread_helper+0x4/0x10
[ 6898.093222]  [<ffffffff8105ef37>] ? kthread_worker_fn+0x139/0x139
[ 6898.093222]  [<ffffffff81351df0>] ? gs_change+0x13/0x13
[ 6898.093222] dd              D ffff88011bc93740     0  8290   4835 0x00000000
[ 6898.093222]  ffff88011340e100 0000000000000082 0000000000000000 ffff880116f080c0
[ 6898.093222]  0000000000013740 ffff88010a655fd8 ffff88010a655fd8 ffff88011340e100
[ 6898.093222]  ffff88010a655a48 000000010a655a48 ffff880113118440 ffff88011bc93f90
[ 6898.093222] Call Trace:
[ 6898.093222]  [<ffffffff81349c24>] ? io_schedule+0x59/0x71
[ 6898.093222]  [<ffffffff81197eef>] ? get_request_wait+0x105/0x18f
[ 6898.093222]  [<ffffffff8105f5f3>] ? add_wait_queue+0x3c/0x3c
[ 6898.093222]  [<ffffffff81198e44>] ? blk_queue_bio+0x17f/0x28b
[ 6898.093222]  [<ffffffff8119797b>] ? generic_make_request+0x90/0xcf
[ 6898.093222]  [<ffffffff81197a8d>] ? submit_bio+0xd3/0xf1
[ 6898.093222]  [<ffffffff8111fb82>] ? bio_alloc_bioset+0x43/0xb6
[ 6898.093222]  [<ffffffff8111bb30>] ? submit_bh+0xe2/0xff
[ 6898.093222]  [<ffffffff8111ceef>] ? __block_write_full_page+0x1ee/0x2d5
[ 6898.093222]  [<ffffffff8111e70b>] ? bit_spin_lock.constprop.30+0x22/0x22
[ 6898.093222]  [<ffffffff811211e3>] ? blkdev_get_blocks+0x83/0x83
[ 6898.093222]  [<ffffffff810bb686>] ? __writepage+0xa/0x21
[ 6898.093222]  [<ffffffff810bb50e>] ? write_cache_pages+0x1f8/0x2e9
[ 6898.093222]  [<ffffffff810bb67c>] ? set_page_dirty_lock+0x2b/0x2b
[ 6898.093222]  [<ffffffff810bb639>] ? generic_writepages+0x3a/0x52
[ 6898.093222]  [<ffffffff810b4cd0>] ? __filemap_fdatawrite_range+0x4b/0x50
[ 6898.093222]  [<ffffffff810b57a8>] ? filemap_write_and_wait+0x15/0x30
[ 6898.093222]  [<ffffffff811212bf>] ? __blkdev_put+0x6e/0x168
[ 6898.093222]  [<ffffffff8119ec5e>] ? disk_flush_events+0x48/0x5a
[ 6898.093222]  [<ffffffff810fa30d>] ? fput+0xf9/0x1a1
[ 6898.093222]  [<ffffffff810f8036>] ? filp_close+0x62/0x6a
[ 6898.093222]  [<ffffffff810f80cc>] ? sys_close+0x8e/0xcb
[ 6898.093222]  [<ffffffff8134fc92>] ? system_call_fastpath+0x16/0x1b
[ 6898.093222] blkid           D ffff88011bc93740     0  8293      1 0x00000004
[ 6898.093222]  ffff88011408a040 0000000000000086 0000000000000000 ffff880116f080c0
[ 6898.093222]  0000000000013740 ffff880109739fd8 ffff880109739fd8 ffff88011408a040
[ 6898.093222]  0000000000000100 0000000109739b60 ffff880109739b60 ffff88011214f3d8
[ 6898.093222] Call Trace:
[ 6898.093222]  [<ffffffff8134a2cf>] ? __mutex_lock_common.isra.5+0xff/0x164
[ 6898.093222]  [<ffffffff8134a1bd>] ? mutex_lock+0x1a/0x2d
[ 6898.093222]  [<ffffffff81121565>] ? __blkdev_get+0x9a/0x3a9
[ 6898.093222]  [<ffffffff81121b1b>] ? blkdev_get+0x2a7/0x2a7
[ 6898.093222]  [<ffffffff81121a3b>] ? blkdev_get+0x1c7/0x2a7
[ 6898.093222]  [<ffffffff81036457>] ? should_resched+0x5/0x23
[ 6898.093222]  [<ffffffff81121b1b>] ? blkdev_get+0x2a7/0x2a7
[ 6898.093222]  [<ffffffff810f7c66>] ? __dentry_open+0x19c/0x2b3
[ 6898.093222]  [<ffffffff811010c8>] ? dget+0x12/0x1e
[ 6898.093222]  [<ffffffff81104239>] ? do_last+0x553/0x58d
[ 6898.093222]  [<ffffffff8110486b>] ? path_openat+0xce/0x32a
[ 6898.093222]  [<ffffffff810cd779>] ? pte_offset_kernel+0x16/0x35
[ 6898.093222]  [<ffffffff81104b89>] ? do_filp_open+0x2a/0x6e
[ 6898.093222]  [<ffffffff813499cf>] ? _cond_resched+0x7/0x1c
[ 6898.093222]  [<ffffffff811b29d9>] ? __strncpy_from_user+0x18/0x48
[ 6898.093222]  [<ffffffff8110d8bf>] ? alloc_fd+0x64/0x109
[ 6898.093222]  [<ffffffff810f8b3b>] ? do_sys_open+0x5e/0xe5
[ 6898.093222]  [<ffffffff8134fc92>] ? system_call_fastpath+0x16/0x1b
[ 6898.093222] Sched Debug Version: v0.10, 3.2.0-3-amd64 #1
[ 6898.093222] ktime                                   : 6898097.350010
[ 6898.093222] sched_clk                               : 6880930.875999
[ 6898.093222] cpu_clk                                 : 6898093.222120
[ 6898.093222] jiffies                                 : 4296616819
[ 6898.093222] sched_clock_stable                      : 0
[ 6898.093222] 
[ 6898.093222] sysctl_sched
[ 6898.093222]   .sysctl_sched_latency                    : 12.000000
[ 6898.093222]   .sysctl_sched_min_granularity            : 1.500000
[ 6898.093222]   .sysctl_sched_wakeup_granularity         : 2.000000
[ 6898.093222]   .sysctl_sched_child_runs_first           : 0
[ 6898.093222]   .sysctl_sched_features                   : 24119
[ 6898.093222]   .sysctl_sched_tunable_scaling            : 1 (logaritmic)
[ 6898.093222] 
[ 6898.093222] cpu#0, 2659.940 MHz
[ 6898.093222]   .nr_running                    : 2
[ 6898.093222]   .load                          : 2048
[ 6898.093222]   .nr_switches                   : 4152032
[ 6898.093222]   .nr_load_updates               : 64449
[ 6898.093222]   .nr_uninterruptible            : -150
[ 6898.093222]   .next_balance                  : 4296.616789
[ 6898.093222]   .curr->pid                     : 6000
[ 6898.093222]   .clock                         : 6898089.232787
[ 6898.093222]   .cpu_load[0]                   : 0
[ 6898.093222]   .cpu_load[1]                   : 0
[ 6898.093222]   .cpu_load[2]                   : 0
[ 6898.093222]   .cpu_load[3]                   : 0
[ 6898.093222]   .cpu_load[4]                   : 0
[ 6898.093222] 
[ 6898.093222] cfs_rq[0]:/
[ 6898.093222]   .exec_clock                    : 0.000000
[ 6898.093222]   .MIN_vruntime                  : 241642.340492
[ 6898.093222]   .min_vruntime                  : 241647.429470
[ 6898.093222]   .max_vruntime                  : 241642.340492
[ 6898.093222]   .spread                        : 0.000000
[ 6898.093222]   .spread0                       : 0.000000
[ 6898.093222]   .nr_spread_over                : 0
[ 6898.093222]   .nr_running                    : 2
[ 6898.093222]   .load                          : 2048
[ 6898.093222]   .load_avg                      : 0.000000
[ 6898.093222]   .load_period                   : 0.000000
[ 6898.093222]   .load_contrib                  : 0
[ 6898.093222]   .load_tg                       : 0
[ 6898.093222] 
[ 6898.093222] rt_rq[0]:
[ 6898.093222]   .rt_nr_running                 : 0
[ 6898.093222]   .rt_throttled                  : 0
[ 6898.093222]   .rt_time                       : 0.000000
[ 6898.093222]   .rt_runtime                    : 950.000000
[ 6898.093222] 
[ 6898.093222] runnable tasks:
[ 6898.093222]             task   PID         tree-key  switches  prio     exec-runtime         sum-exec        sum-sleep
[ 6898.093222] ----------------------------------------------------------------------------------------------------------
[ 6898.093222] R           bash  6000    241643.431612       740   120               0               0               0.000000               0.000000               0.000000 /
[ 6898.093222]      kworker/0:0  8109    241642.340492      9944   120               0               0               0.000000               0.000000               0.000000 /
[ 6898.093222] 
[ 6898.093222] cpu#1, 2659.940 MHz
[ 6898.093222]   .nr_running                    : 0
[ 6898.093222]   .load                          : 0
[ 6898.093222]   .nr_switches                   : 4138915
[ 6898.093222]   .nr_load_updates               : 77290
[ 6898.093222]   .nr_uninterruptible            : 154
[ 6898.093222]   .next_balance                  : 4296.616807
[ 6898.093222]   .curr->pid                     : 0
[ 6898.093222]   .clock                         : 6898089.732467
[ 6898.093222]   .cpu_load[0]                   : 0
[ 6898.093222]   .cpu_load[1]                   : 0
[ 6898.093222]   .cpu_load[2]                   : 0
[ 6898.093222]   .cpu_load[3]                   : 0
[ 6898.093222]   .cpu_load[4]                   : 0
[ 6898.093222] 
[ 6898.093222] cfs_rq[1]:/
[ 6898.093222]   .exec_clock                    : 0.000000
[ 6898.093222]   .MIN_vruntime                  : 0.000001
[ 6898.093222]   .min_vruntime                  : 391212.962524
[ 6898.093222]   .max_vruntime                  : 0.000001
[ 6898.093222]   .spread                        : 0.000000
[ 6898.093222]   .spread0                       : 149565.533054
[ 6898.093222]   .nr_spread_over                : 0
[ 6898.093222]   .nr_running                    : 0
[ 6898.093222]   .load                          : 0
[ 6898.093222]   .load_avg                      : 0.000000
[ 6898.093222]   .load_period                   : 0.000000
[ 6898.093222]   .load_contrib                  : 0
[ 6898.093222]   .load_tg                       : 0
[ 6898.093222] 
[ 6898.093222] rt_rq[1]:
[ 6898.093222]   .rt_nr_running                 : 0
[ 6898.093222]   .rt_throttled                  : 0
[ 6898.093222]   .rt_time                       : 0.000000
[ 6898.093222]   .rt_runtime                    : 950.000000
[ 6898.093222] 
[ 6898.093222] runnable tasks:
[ 6898.093222]             task   PID         tree-key  switches  prio     exec-runtime         sum-exec        sum-sleep
[ 6898.093222] ----------------------------------------------------------------------------------------------------------
[ 6898.093222] 

Reply to: