Your message dated Mon, 15 Oct 2012 02:49:29 +0100 with message-id <1350265769.26833.34.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#690505: linux-image-3.2.0-3-amd64: broken usb device breaks direct i/o even to non-usb drives has caused the Debian Bug report #690505, regarding linux-image-3.2.0-3-amd64: broken usb device breaks direct i/o even to non-usb drives to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 690505: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690505 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-3-amd64: broken usb device breaks direct i/o even to non-usb drives
- From: mail user <mailinglists35@gmail.com>
- Date: Mon, 15 Oct 2012 04:17:03 +0300
- Message-id: <[🔎] 20121015011703.7801.36529.reportbug@gmail.com>
Package: src:linux Version: 3.2.23-1 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? plugging in a fake (128 that later turned out to be just 2Gb) flashdrive in the usb port, dd it to /dev/null, ctrl-c, dd zeroes to it, ctrl-c, dd unresponsive to ctrl-c kernel dmesg at connect: Oct 15 00:27:38 homerouter kernel: [87964.904034] usb 8-4: new high-speed USB device number 3 using ehci_hcd Oct 15 00:27:38 homerouter kernel: [87965.203846] usb 8-4: New USB device found, idVendor=0011, idProduct=7788 Oct 15 00:27:38 homerouter kernel: [87965.203894] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 15 00:27:38 homerouter kernel: [87965.203941] usb 8-4: Product: Mass Storage Oct 15 00:27:38 homerouter kernel: [87965.203981] usb 8-4: Manufacturer: Generic Oct 15 00:27:38 homerouter kernel: [87965.204031] usb 8-4: SerialNumber: BEF961F3 Oct 15 00:27:39 homerouter kernel: [87965.330025] usbcore: registered new interface driver uas Oct 15 00:27:39 homerouter kernel: [87965.343501] Initializing USB Mass Storage driver... Oct 15 00:27:39 homerouter kernel: [87965.343628] scsi4 : usb-storage 8-4:1.0 Oct 15 00:27:39 homerouter kernel: [87965.343733] usbcore: registered new interface driver usb-storage Oct 15 00:27:39 homerouter kernel: [87965.343777] USB Mass Storage support registered. Oct 15 00:27:40 homerouter kernel: [87966.342129] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2 Oct 15 00:27:40 homerouter kernel: [87966.342817] sd 4:0:0:0: Attached scsi generic sg3 type 0 Oct 15 00:27:40 homerouter kernel: [87966.344361] sd 4:0:0:0: [sdc] 270336000 512-byte logical blocks: (138 GB/128 GiB) Oct 15 00:27:40 homerouter kernel: [87966.345477] sd 4:0:0:0: [sdc] Write Protect is off Oct 15 00:27:40 homerouter kernel: [87966.345527] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00 Oct 15 00:27:40 homerouter kernel: [87966.345980] sd 4:0:0:0: [sdc] No Caching mode page present Oct 15 00:27:40 homerouter kernel: [87966.346028] sd 4:0:0:0: [sdc] Assuming drive cache: write through Oct 15 00:27:40 homerouter kernel: [87966.348736] sd 4:0:0:0: [sdc] No Caching mode page present Oct 15 00:27:40 homerouter kernel: [87966.348782] sd 4:0:0:0: [sdc] Assuming drive cache: write through Oct 15 00:27:40 homerouter kernel: [87966.673992] sdc: unknown partition table Oct 15 00:27:40 homerouter kernel: [87966.676613] sd 4:0:0:0: [sdc] No Caching mode page present Oct 15 00:27:40 homerouter kernel: [87966.676659] sd 4:0:0:0: [sdc] Assuming drive cache: write through Oct 15 00:27:40 homerouter kernel: [87966.676703] sd 4:0:0:0: [sdc] Attached SCSI removable disk * What exactly did you do (or not do) that was effective (or ineffective)? modprobe -r usb-storage, which proved ineffective then rmmod -f usb-storage then unplug the flashdrive * What was the outcome of this action? forced removal of usb-storage produced the following kernel dmesg (ignore the tainted message, it is from the zfs/spl modules): Oct 15 00:40:50 homerouter kernel: [88756.711046] Disabling lock debugging due to kernel taint Oct 15 00:40:50 homerouter kernel: [88756.711092] usbcore: deregistering interface driver usb-storage Oct 15 00:40:51 homerouter kernel: [88757.349748] BUG: unable to handle kernel paging request at ffffffffa05b9020 Oct 15 00:40:51 homerouter kernel: [88757.349831] IP: [<ffffffffa018ef60>] scsi_device_put+0x11/0x3c [scsi_mod] Oct 15 00:40:51 homerouter kernel: [88757.349902] PGD 1607067 PUD 160b063 PMD 115785067 PTE 0 Oct 15 00:40:51 homerouter kernel: [88757.350012] Oops: 0000 [#1] SMP Oct 15 00:40:51 homerouter kernel: [88757.350083] CPU 1 Oct 15 00:40:51 homerouter kernel: [88757.350105] Modules linked in: uas nfnetlink_log nfnetlink pppoe pppox ppp_generic slhc bluetooth drbd lru_cache cn tun ip6table_filter ip6_tables ebtable_nat ebtables iscsi_trgt(O) crc32c ipt_LOG ipt_REJECT xt_recent xt_multiport xt_conntrack iptable_filter xt_TCPMSS xt_tcpmss iptable_mangle ipt_MASQUERADE xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ip_tables x_tables ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse bridge stp smsc47b397 loop kvm_intel kvm tpm_infineon snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm acpi_cpufreq snd_page_alloc snd_timer i915 drm_kms_helper drm hp_wmi asix mcs7830 snd i2c_algo_bit sparse_keymap usbnet soundcore rfkill tpm_tis tpm tpm_bios iTCO_wdt mperf i2c_core psmouse iTCO_vendor_support pcspkr processor wmi video coretemp evdev thermal_sys serio_raw button ext4 c rc16 jbd2 mbcache raid1 md_mod dm_mirror Oct 15 00:40:51 homerouter kernel: dm_region_hash dm_log dm_mod sg sr_mod cdrom sd_mod crc_t10dif ata_generic uhci_hcd floppy e100 mii ata_piix ehci_hcd libata scsi_mod e1000e usbcore usb_common [last unloaded: usb_storage] Oct 15 00:40:51 homerouter kernel: [88757.352003] Oct 15 00:40:51 homerouter kernel: [88757.352003] Pid: 22299, comm: dd Tainted: G R O 3.2.0-3-amd64 #1 Hewlett-Packard HP Compaq dc5800 Microtower/2820h Oct 15 00:40:51 homerouter kernel: [88757.352003] RIP: 0010:[<ffffffffa018ef60>] [<ffffffffa018ef60>] scsi_device_put+0x11/0x3c [scsi_mod] Oct 15 00:40:51 homerouter kernel: [88757.352003] RSP: 0018:ffff8801044dbe48 EFLAGS: 00010286 Oct 15 00:40:51 homerouter kernel: [88757.352003] RAX: ffffffffa05b9020 RBX: ffff880115e1a400 RCX: 00000000ffffffff Oct 15 00:40:51 homerouter kernel: [88757.352003] RDX: 0000000000000000 RSI: ffff880115fd58a0 RDI: ffff880112b71800 Oct 15 00:40:51 homerouter kernel: [88757.352003] RBP: ffff880112b71800 R08: dead000000100100 R09: 0000000000000000 Oct 15 00:40:51 homerouter kernel: [88757.352003] R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000001e Oct 15 00:40:51 homerouter kernel: [88757.352003] R13: ffff880105c29af8 R14: ffff880114ecf000 R15: ffff880111e0f6d8 Oct 15 00:40:51 homerouter kernel: [88757.352003] FS: 00007fba1fde8700(0000) GS:ffff88011bc80000(0000) knlGS:0000000000000000 Oct 15 00:40:51 homerouter kernel: [88757.352003] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Oct 15 00:40:51 homerouter kernel: [88757.352003] CR2: ffffffffa05b9020 CR3: 00000001034d4000 CR4: 00000000000006e0 Oct 15 00:40:51 homerouter kernel: [88757.352003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Oct 15 00:40:51 homerouter kernel: [88757.352003] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Oct 15 00:40:51 homerouter kernel: [88757.352003] Process dd (pid: 22299, threadinfo ffff8801044da000, task ffff880113f4ce20) Oct 15 00:40:51 homerouter kernel: [88757.352003] Stack: Oct 15 00:40:51 homerouter kernel: [88757.352003] dead000000100100 ffff880115e1a400 ffff880112b71800 ffffffffa002fb6c Oct 15 00:40:51 homerouter kernel: [88757.352003] 0000000000000000 ffff880115e1a400 ffff880112b71800 ffffffffa0030473 Oct 15 00:40:51 homerouter kernel: [88757.352003] 0000000000000000 ffff880111e0f6c0 0000000000000000 ffffffff81121312 Oct 15 00:40:51 homerouter kernel: [88757.352003] Call Trace: Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffffa002fb6c>] ? scsi_disk_put+0x28/0x38 [sd_mod] Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffffa0030473>] ? sd_release+0xa0/0xa6 [sd_mod] Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff81121312>] ? __blkdev_put+0xc1/0x168 Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff8119ec5e>] ? disk_flush_events+0x48/0x5a Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff810fa30d>] ? fput+0xf9/0x1a1 Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff810f8036>] ? filp_close+0x62/0x6a Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff810f80cc>] ? sys_close+0x8e/0xcb Oct 15 00:40:51 homerouter kernel: [88757.352003] [<ffffffff8134fc92>] ? system_call_fastpath+0x16/0x1b Oct 15 00:40:51 homerouter kernel: [88757.352003] Code: 4d 8b 6d 10 49 83 ed 10 49 8d 45 10 49 39 c6 75 c8 5b 5d 41 5c 41 5d 41 5e c3 55 48 89 fd 53 41 50 48 8b 07 48 8b 80 b8 00 00 00 <48> 8b 18 48 85 db 74 14 48 89 df e8 d7 2f ee e0 85 c0 74 08 48 Oct 15 00:40:51 homerouter kernel: [88757.352003] RIP [<ffffffffa018ef60>] scsi_device_put+0x11/0x3c [scsi_mod] Oct 15 00:40:51 homerouter kernel: [88757.352003] RSP <ffff8801044dbe48> Oct 15 00:40:51 homerouter kernel: [88757.352003] CR2: ffffffffa05b9020 Oct 15 00:40:51 homerouter kernel: [88757.352003] ---[ end trace 31a604df3c5f331d ]--- udev entered in unusable state: * spawned processes that remained in D state 26785 ? D 0:00 /lib/udev/ata_id --export /dev/sdb 26786 ? D 0:00 /lib/udev/ata_id --export /dev/sda 26874 ? D 0:00 /sbin/mdadm --detail --export /dev/md0 * spammed the system logs with lines like this: Oct 14 11:56:07 homerouter udevd[27438]: timeout: killing '/sbin/mdadm \ --detail --export /dev/md0' [27631] processes requesting direct i/o access to local hard drives attached to onboard pci sata ahci controller failed to complete (hdparm, smartd, lshw, hwinfo) for example, "root@homerouter:~# strace -f fdisk -l /dev/sda execve("/sbin/fdisk", ["fdisk", "-l", "/dev/sda"], [/* 24 vars */]) = 0 brk(0) = 0x16f0000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa6c3d71000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=69342, ...}) = 0 mmap(NULL, 69342, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fa6c3d60000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libblkid.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0Pn\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=159856, ...}) = 0 mmap(NULL, 2255016, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa6c392d000 mprotect(0x7fa6c3950000, 2097152, PROT_NONE) = 0 mmap(0x7fa6c3b50000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x23000) = 0x7fa6c3b50000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\357\1\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1583120, ...}) = 0 mmap(NULL, 3696728, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa6c35a6000 mprotect(0x7fa6c3723000, 2097152, PROT_NONE) = 0 mmap(0x7fa6c3923000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17d000) = 0x7fa6c3923000 mmap(0x7fa6c3928000, 18520, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fa6c3928000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libuuid.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\31\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=18896, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa6c3d5f000 mmap(NULL, 2113968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fa6c33a1000 mprotect(0x7fa6c33a5000, 2093056, PROT_NONE) = 0 mmap(0x7fa6c35a4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fa6c35a4000 close(3) = 0 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa6c3d5d000 arch_prctl(ARCH_SET_FS, 0x7fa6c3d5d740) = 0 mprotect(0x7fa6c35a4000, 4096, PROT_READ) = 0 mprotect(0x7fa6c3923000, 16384, PROT_READ) = 0 mprotect(0x7fa6c3b50000, 12288, PROT_READ) = 0 mprotect(0x616000, 4096, PROT_READ) = 0 mprotect(0x7fa6c3d73000, 4096, PROT_READ) = 0 munmap(0x7fa6c3d60000, 69342) = 0 brk(0) = 0x16f0000 brk(0x1711000) = 0x1711000 open("/usr/lib/locale/locale-archive", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=1534672, ...}) = 0 mmap(NULL, 1534672, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fa6c3be6000 close(3) = 0 open("/dev/sda", O_RDONLY" <- and nothing else beyond this point. * What outcome did you expect instead? safely handle this situation *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=/dev/md0p2 ro nomodeset vga=normal drm=off inteldrmfb=off ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 5.758207] udevd[389]: starting version 175 [ 6.013012] wmi: Mapper loaded [ 6.020549] iTCO_vendor_support: vendor-support=0 [ 6.032920] ACPI: Requesting acpi_cpufreq [ 6.033175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 6.033236] ACPI: Power Button [PBTN] [ 6.033726] Marking TSC unstable due to TSC halts in idle [ 6.033774] ACPI: acpi_idle registered with cpuidle [ 6.033856] Switching to clocksource hpet [ 6.034190] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 6.034258] ACPI: Power Button [PWRF] [ 6.035869] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.035990] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0xf860) [ 6.036122] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.137046] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 6.257613] usb 1-4: applying rev.C fixup [ 6.264117] usb 1-4: applying rev.C fixup [ 6.273064] MOSCHIP usb-ethernet driver 1-4:1.0: eth2: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:1a.7-4, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:12:05:55 [ 6.273163] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.336674] [drm] Initialized drm 1.1.0 20060810 [ 6.376128] input: HP WMI hotkeys as /devices/virtual/input/input3 [ 6.385501] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 6.408425] udevd[446]: renamed network interface eth1 to eth5 [ 6.420424] udevd[450]: renamed network interface eth0 to eth1 [ 6.425203] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.425248] pci 0000:00:02.0: setting latency timer to 64 [ 6.450453] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 6.450510] [drm] MTRR allocation failed. Graphics performance may suffer. [ 6.450822] pci 0000:00:02.0: irq 43 for MSI/MSI-X [ 6.450827] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.450868] [drm] No driver support for vblank timestamp query. [ 6.460180] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1147) [ 6.460322] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 6.460423] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 6.460491] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.556396] udevd[434]: renamed network interface eth2 to eth0 [ 6.657350] asix 7-2:1.0: eth2: register 'asix' at usb-0000:00:1d.7-2, ASIX AX88772 USB 2.0 Ethernet, 00:80:8c:8e:2a:8c [ 6.657434] usbcore: registered new interface driver asix [ 6.665608] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.665708] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.665729] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.755905] Error: Driver 'pcspkr' is already registered, aborting... [ 7.068079] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 7.130253] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 8.460473] ata4.00: configured for UDMA/133 [ 8.460515] ata4: EH complete [ 8.885818] Adding 2055164k swap on /dev/md0p3. Priority:-1 extents:1 across:2055164k [ 8.898597] EXT4-fs (md0p2): re-mounted. Opts: (null) [ 9.197584] EXT4-fs (md0p2): re-mounted. Opts: (null) [ 9.302356] loop: module loaded [ 9.483253] smsc47b397: found SMSC SCH5317 (base address 0x0480, revision 1) [ 11.781545] e1000e 0000:00:19.0: eth5: changing MTU from 1500 to 9000 [ 11.983040] Bridge firewalling registered [ 12.358074] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 12.412072] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 12.412728] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 12.430241] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.432267] e100 0000:07:04.0: eth1: NIC Link is Up 100 Mbps Full Duplex [ 12.432976] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 12.464893] device eth2 entered promiscuous mode [ 13.266931] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 13.269239] ADDRCONF(NETDEV_UP): br0: link is not ready [ 13.382822] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 13.384033] br0: port 1(eth2) entering forwarding state [ 13.384079] br0: port 1(eth2) entering forwarding state [ 13.384664] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 13.385397] asix 7-2:1.0: eth2: link down [ 13.428584] br0: port 1(eth2) entering forwarding state [ 15.048276] br0: port 1(eth2) entering forwarding state [ 15.048326] br0: port 1(eth2) entering forwarding state [ 15.050400] asix 7-2:1.0: eth2: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 15.312814] fuse init (API version 7.17) [ 15.520854] e1000e: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 15.521371] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready [ 15.695500] Loading iSCSI transport class v2.0-870. [ 15.714250] iscsi: registered transport (tcp) [ 15.762050] iscsi: registered transport (iser) [ 16.440799] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.624503] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 17.468040] device br0 entered promiscuous mode [ 17.826070] iSCSI Enterprise Target Software - version 1.4.20.3 [ 17.826155] iscsi_trgt: Registered io type fileio [ 17.826199] iscsi_trgt: Registered io type blockio [ 17.826239] iscsi_trgt: Registered io type nullio [ 18.865202] Ebtables v2.0 registered [ 19.183144] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.638950] tun: Universal TUN/TAP device driver, 1.6 [ 26.639018] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 29.124430] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [ 29.124488] drbd: srcversion: 2D876214BAAD53B31ADC1D6 [ 29.124527] drbd: registered as block device major 147 [ 29.124567] drbd: minor_table @ 0xffff88011404f180 [ 30.842513] Bluetooth: Core ver 2.16 [ 30.842567] NET: Registered protocol family 31 [ 30.842612] Bluetooth: HCI device and connection manager initialized [ 30.842660] Bluetooth: HCI socket layer initialized [ 30.842705] Bluetooth: L2CAP socket layer initialized [ 30.842753] Bluetooth: SCO socket layer initialized [ 30.850102] PPP generic driver version 2.4.2 [ 30.992431] NET: Registered protocol family 24 ** Model information sys_vendor: Hewlett-Packard product_name: HP Compaq dc5800 Microtower product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 786F2 v01.55 board_vendor: Hewlett-Packard board_name: 2820h board_version: ** Loaded modules: pppoe pppox ppp_generic bluetooth slhc drbd lru_cache cn tun ip6table_filter ip6_tables ebtable_nat ebtables iscsi_trgt(O) crc32c ipt_LOG ipt_REJECT xt_recent xt_multiport xt_conntrack iptable_filter xt_TCPMSS xt_tcpmss iptable_mangle ipt_MASQUERADE xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ip_tables x_tables ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse bridge stp smsc47b397 loop kvm_intel kvm tpm_infineon snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm i915 tpm_tis tpm asix tpm_bios drm_kms_helper drm i2c_algo_bit snd_page_alloc mcs7830 usbnet coretemp snd_timer snd soundcore psmouse hp_wmi sparse_keymap serio_raw i2c_core rfkill acpi_cpufreq pcspkr mperf evdev iTCO_wdt video button processor iTCO_vendor_support wmi thermal_sys ext4 crc16 jbd2 mbcache raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom sd_mod crc_t10dif ata_generic floppy uhci_hcd e100 mii ata_piix ehci_hcd libata scsi_mod e1000e usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82Q33 Express DRAM Controller [8086:29d0] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0b <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q33 Express Integrated Graphics Controller [8086:29d2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at f0200000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 2240 [size=8] Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0100000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4181 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:03.0 Communication controller [0780]: Intel Corporation 82Q33 Express MEI Controller [8086:29d4] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f02a5900 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: Memory at f0280000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f02a4000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 2100 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4199 Capabilities: [e0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 2120 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 2140 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 2160 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at f02a5000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f02a0000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4189 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f8400000-f85fffff Prefetchable memory behind bridge: 00000000f8600000-00000000f87fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4151 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:281e] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=30, subordinate=30, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f81fffff Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4159 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:281e] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=02 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 2180 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 21a0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 21c0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at f02a5400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f00fffff Prefetchable memory behind bridge: 00000000f0300000-00000000f03fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:281e] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 2200 [size=16] Region 5: I/O ports at 2210 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ata_piix 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Device [103c:281e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 2258 [size=8] Region 1: I/O ports at 2270 [size=4] Region 2: I/O ports at 2260 [size=8] Region 3: I/O ports at 2274 [size=4] Region 4: I/O ports at 2220 [size=16] Region 5: I/O ports at 2230 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ata_piix 07:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05) Subsystem: Intel Corporation 82558B PRO/100+ PCI (TP) [8086:0009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at f0300000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at 1100 [size=32] Region 2: Memory at f0000000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at f8800000 [disabled] [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: e100 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Bus 007 Device 002: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.108 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-3-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-23 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.36 pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf-show failed
--- End Message ---
--- Begin Message ---
- To: 690505-done@bugs.debian.org
- Subject: Re: Bug#690505: linux-image-3.2.0-3-amd64: broken usb device breaks direct i/o even to non-usb drives
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 15 Oct 2012 02:49:29 +0100
- Message-id: <1350265769.26833.34.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20121015011703.7801.36529.reportbug@gmail.com>
- References: <[🔎] 20121015011703.7801.36529.reportbug@gmail.com>
Still not a bug. Ben. -- Ben Hutchings The world is coming to an end. Please log off.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---