Bug#678215: marked as done (ASUS M2A-VM: USB mouse not recognized after resume from suspend to RAM)

To: Jonathan Nieder <jrnieder@gmail.com>
Subject: Bug#678215: marked as done (ASUS M2A-VM: USB mouse not recognized after resume from suspend to RAM)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Tue, 09 Oct 2012 23:03:06 +0000
Message-id: <[🔎] handler.678215.D678215.134982373030364.ackdone@bugs.debian.org>
References: <20121009230158.GA7536@elie.Belkin> <1340145572.19587.30.camel@mattotaupa>

Your message dated Tue, 9 Oct 2012 16:01:58 -0700
with message-id <20121009230158.GA7536@elie.Belkin>
and subject line Re: [wheezy] USB mouse not recognized after resuming from suspend to RAM
has caused the Debian Bug report #678215,
regarding ASUS M2A-VM: USB mouse not recognized after resume from suspend to RAM
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
678215: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678215
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-3.2.0-2-: USB mouse not recognized after resuming from suspend to RAM
From: Paul Menzel <pm.debian@googlemail.com>
Date: Wed, 20 Jun 2012 00:39:32 +0200
Message-id: <1340145572.19587.30.camel@mattotaupa>

Package: linux-image-3.2.0-2-686-pae
Version: 3.2.20-1
Severity: important

Dear Debian folks,


after replacing a broken PS/2 mouse, which worked fine before that, with
an USB mouse

        $ lsusb # output from after the resume and replugged
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
        Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
        Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
        Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
        Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
        Bus 002 Device 004: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key)
        Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
        Bus 003 Device 003: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2

the mouse is not working after resuming from suspend to RAM. Replugging
the mouse works although that is quite inconvenient.

        $ dmesg | grep -i usb
        [    1.526486] usbcore: registered new interface driver usbfs
        [    1.526515] usbcore: registered new interface driver hub
        [    1.531004] usbcore: registered new device driver usb
        [    1.531600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
        [    1.531688] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
        [    1.531720] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
        [    1.540144] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
        [    1.540202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
        [    1.540205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.540208] usb usb1: Product: EHCI Host Controller
        [    1.540210] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
        [    1.540213] usb usb1: SerialNumber: 0000:00:13.5
        [    1.540349] hub 1-0:1.0: USB hub found
        [    1.540878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
        [    1.540939] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
        [    1.600050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
        [    1.600056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.600059] usb usb2: Product: OHCI Host Controller
        [    1.600062] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
        [    1.600064] usb usb2: SerialNumber: 0000:00:13.0
        [    1.600228] hub 2-0:1.0: USB hub found
        [    1.603453] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
        [    1.660039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
        [    1.660042] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.660045] usb usb3: Product: OHCI Host Controller
        [    1.660047] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
        [    1.660050] usb usb3: SerialNumber: 0000:00:13.1
        [    1.660210] hub 3-0:1.0: USB hub found
        [    1.660571] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
        [    1.720027] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
        [    1.720031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.720034] usb usb4: Product: OHCI Host Controller
        [    1.720036] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
        [    1.720039] usb usb4: SerialNumber: 0000:00:13.2
        [    1.720200] hub 4-0:1.0: USB hub found
        [    1.720309] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
        [    1.780066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
        [    1.780069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.780072] usb usb5: Product: OHCI Host Controller
        [    1.780074] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
        [    1.780076] usb usb5: SerialNumber: 0000:00:13.3
        [    1.780246] hub 5-0:1.0: USB hub found
        [    1.780584] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
        [    1.840051] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
        [    1.840054] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
        [    1.840057] usb usb6: Product: OHCI Host Controller
        [    1.840059] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
        [    1.840062] usb usb6: SerialNumber: 0000:00:13.4
        [    1.840220] hub 6-0:1.0: USB hub found
        [    2.228017] usb 2-1: new low-speed USB device number 2 using ohci_hcd
        [    2.401061] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f
        [    2.401066] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
        [    2.401070] usb 2-1: Product: Logitech USB Keyboard
        [    2.401072] usb 2-1: Manufacturer: Logitech
        [    2.412420] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0
        [    2.412556] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
        [    2.425234] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input1
        [    2.425360] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1
        [    2.425388] usbcore: registered new interface driver usbhid
        [    2.425391] usbhid: USB HID core driver
        [    2.664032] usb 2-2: new full-speed USB device number 3 using ohci_hcd
        [    2.831057] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
        [    2.831063] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
        [    2.831066] usb 2-2: Product: Generic USB Hub
        [    2.831068] usb 2-2: Manufacturer: ALCOR
        [    2.833098] hub 2-2:1.0: USB hub found
        [    3.108025] usb 3-1: new low-speed USB device number 2 using ohci_hcd
        [    3.273061] usb 3-1: New USB device found, idVendor=1241, idProduct=1122
        [    3.273066] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
        [    3.282359] input: HID 1241:1122 as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input2
        [    3.282472] generic-usb 0003:1241:1122.0003: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-1/input0

Now the system is resuming after `sudo pm-suspend`.

        [12498.968042] usb 2-2: reset full-speed USB device number 3 using ohci_hcd
        [12512.152050] usb 2-1: USB disconnect, device number 2
        [12512.544068] usb 3-1: USB disconnect, device number 2

Could the above disconnect be the problem here?

        [12512.968046] usb 2-1: new low-speed USB device number 4 using ohci_hcd
        [12513.143894] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f
        [12513.143901] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
        [12513.143905] usb 2-1: Product: Logitech USB Keyboard
        [12513.143908] usb 2-1: Manufacturer: Logitech
        [12513.157357] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input5
        [12513.157747] generic-usb 0003:046D:C30F.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
        [12513.170016] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input6
        [12513.170314] generic-usb 0003:046D:C30F.0005: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1

The keyboard is detected twice, but not the mouse.

        [12710.284049] usb 3-2: new low-speed USB device number 3 using ohci_hcd
        [12710.449087] usb 3-2: New USB device found, idVendor=1241, idProduct=1122
        [12710.449097] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
        [12710.458732] input: HID 1241:1122 as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input7
        [12710.459106] generic-usb 0003:1241:1122.0006: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-2/input0

Replugging the mouse makes it work again. So the mouse is not recognized
after the resume.

I used that mouse on an ASUS EeePC 701 4G with outdated Debian
Sid/unstable and Linux 3.0.0 without problems.


Thanks,

Paul

-- Package-specific info:
** Kernel log: USB boot messages pasted above

** Model information
not available

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7910]
	Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fdb00000-fdcfffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fda00000-fdafffff
	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at fc00 [size=8]
	Region 1: I/O ports at f800 [size=4]
	Region 2: I/O ports at f400 [size=8]
	Region 3: I/O ports at f000 [size=4]
	Region 4: I/O ports at ec00 [size=16]
	Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 14)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 0b00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at e400 [size=16]
	Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge [1002:438d]
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fde00000-fdefffff
	Prefetchable memory behind bridge: fdd00000-fddfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
	Region 2: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at cc00 [size=256]
	Region 5: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: I/O ports at dc00 [size=256]
	Region 2: Memory at fdaff000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key)
Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 003 Device 003: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.43
ii  initramfs-tools [linux-initramfs-tool]  0.103
ii  kmod                                    8-2
ii  linux-base                              3.5
ii  module-init-tools                       8-2

Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii  firmware-linux-free  3.1
ii  libc6-i686           2.13-33

Versions of packages linux-image-3.2.0-2-amd64 suggests:
ii  grub-pc        1.99-22.1
pn  linux-doc-3.2  <none>

Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.36
ii  firmware-linux-nonfree  0.36
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
  linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
  linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true

Attachment: signature.asc
Description: This is a digitally signed message part

--- End Message ---

--- Begin Message ---

To: Paul Menzel <pm.debian@googlemail.com>

Cc: 678215-done@bugs.debian.org

Subject: Re: [wheezy] USB mouse not recognized after resuming from suspend to RAM

From: Jonathan Nieder <jrnieder@gmail.com>

Date: Tue, 9 Oct 2012 16:01:58 -0700

Message-id: <20121009230158.GA7536@elie.Belkin>

In-reply-to: <1344257297.4154.15.camel@mattotaupa>

References: <1340145572.19587.30.camel@mattotaupa> <20120626223505.GA7042@burratino> <20120806072724.GA27874@mannheim-rule.local> <1344257297.4154.15.camel@mattotaupa>
Paul Menzel wrote:

> I am not certain if I am going to have the chance to test this again
> with the ASUS M2A-VM. So maybe we should just close this bug as
> (currently) unreproducible or moreinfo?

Ok.  Closing, but if it happens again, please don't hesitate to write.

Thanks,
Jonathan
--- End Message ---

Reply to:

Prev by Date: Re: video: USB webcam fails since kernel 3.2
Next by Date: Bug#678215: USB mouse not recognized after resuming from suspend to, RAM
Previous by thread: Bug#677533: video: USB webcam fails since kernel 3.2
Next by thread: Bug#678215: USB mouse not recognized after resuming from suspend to, RAM
Index(es):
- Date
- Thread