--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-1-amd64: No more sound
- From: Yann SOUBEYRAND <yann.soubeyrand@gmx.fr>
- Date: Wed, 25 Jan 2012 13:33:21 +0100
- Message-id: <20120125123321.3818.88956.reportbug@yann-laptop.lan>
Package: linux-2.6
Version: 3.2.1-2
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.1-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Tue Jan 24 05:01:45 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=b252f8a9-135b-4c60-a012-48a782a67be5 ro quiet splash
** Not tainted
** Kernel log:
[ 694.782650] firewire_ohci 0000:06:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 694.782669] firewire_ohci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 694.782672] firewire_ohci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 694.782685] sdhci-pci 0000:06:01.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 694.782708] sdhci-pci 0000:06:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xfeaff400)
[ 694.782714] sdhci-pci 0000:06:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[ 694.782722] sdhci-pci 0000:06:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 694.782746] sdhci-pci 0000:06:01.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 694.782768] sdhci-pci 0000:06:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xfeaff000)
[ 694.782778] sdhci-pci 0000:06:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 694.782801] r592 0000:06:01.3: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 694.782824] r592 0000:06:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xfeafec00)
[ 694.782834] r592 0000:06:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100002)
[ 694.782993] PM: early resume of devices complete after 1.785 msecs
[ 694.783264] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 694.790888] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 694.790902] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 694.790910] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 694.790916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 694.790964] usb usb2: root hub lost power or was reset
[ 694.790968] usb usb3: root hub lost power or was reset
[ 694.790988] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 694.790995] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 694.791031] usb usb4: root hub lost power or was reset
[ 694.791050] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 694.791059] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 694.791101] usb usb5: root hub lost power or was reset
[ 694.791120] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 694.791129] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 694.791172] pci 0000:00:1e.0: setting latency timer to 64
[ 694.791194] sdhci-pci 0000:06:01.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 694.791200] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 694.791204] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 694.792355] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[ 694.792363] r8169 0000:02:00.0: PME# disabled
[ 694.793930] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 694.793942] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 694.793951] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 694.793960] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 694.794011] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 694.794034] sd 0:0:0:0: [sda] Starting disk
[ 694.794070] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 694.794076] nouveau 0000:01:00.0: setting latency timer to 64
[ 694.794085] [drm] nouveau 0000:01:00.0: POSTing device...
[ 694.794089] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE118
[ 694.794186] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE447
[ 694.809335] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9E5
[ 694.809389] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB60
[ 694.810520] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEDB9
[ 694.810523] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 694.822965] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 694.823079] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 694.823172] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 694.823176] [drm] nouveau 0000:01:00.0: 0xD259: Parsing digital output script table
[ 694.823185] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 694.823188] [drm] nouveau 0000:01:00.0: 0xD2BA: Parsing digital output script table
[ 694.860128] firewire_core: skipped bus generations, destroying all nodes
[ 694.954172] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 694.954175] [drm] nouveau 0000:01:00.0: 0xD24A: Parsing digital output script table
[ 694.954187] [drm] nouveau 0000:01:00.0: 0xD518: Parsing digital output script table
[ 695.012329] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 695.012333] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 695.012337] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 695.012340] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 695.032636] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 695.032639] [drm] nouveau 0000:01:00.0: 0xD259: Parsing digital output script table
[ 695.032646] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 695.032649] [drm] nouveau 0000:01:00.0: 0xD2BA: Parsing digital output script table
[ 695.163621] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 695.163624] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 695.163627] [drm] nouveau 0000:01:00.0: 0xD24A: Parsing digital output script table
[ 695.163634] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 695.184073] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[ 695.292052] sdhci-pci 0000:06:01.2: setting latency timer to 64
[ 695.360079] firewire_core: rediscovered device fw0
[ 695.515080] btusb 4-1:1.0: no reset_resume for driver btusb?
[ 695.515086] btusb 4-1:1.1: no reset_resume for driver btusb?
[ 695.572450] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 695.572457] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 695.588331] ata2.00: configured for UDMA/33
[ 697.356262] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[ 697.356270] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 697.356433] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 697.380432] ata1.00: configured for UDMA/133
[ 697.398114] PM: resume of devices complete after 2615.040 msecs
[ 697.398519] PM: Finishing wakeup.
[ 697.398522] Restarting tasks ... done.
[ 697.442235] video LNXVIDEO:00: Restoring backlight state
[ 699.420609] r8169 0000:02:00.0: eth0: link down
[ 699.421355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 699.516369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 705.223214] input: Bluetooth Laser Travel Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/bluetooth/hci0/hci0:43/input12
[ 705.225763] generic-bluetooth 0005:046D:B008.0002: input,hidraw0: BLUETOOTH HID v3.18 Mouse [Bluetooth Laser Travel Mouse] on 00:18:F3:2B:EB:47
[ 707.993292] wlan0: authenticate with f4:ca:e5:ed:c4:f0 (try 1)
[ 707.995058] wlan0: authenticated
[ 707.995401] wlan0: associate with f4:ca:e5:ed:c4:f0 (try 1)
[ 708.019236] wlan0: RX AssocResp from f4:ca:e5:ed:c4:f0 (capab=0x411 status=0 aid=1)
[ 708.019241] wlan0: associated
[ 708.020740] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 771.332193] CE: hpet increased min_delta_ns to 20113 nsec
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: F3JC
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 307
board_vendor: ASUSTeK Computer Inc.
board_name: F3JC
board_version: 1.0
** Loaded modules:
hidp
hid
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
acpi_cpufreq
mperf
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
deflate
zlib_deflate
ctr
twofish_generic
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia
serpent
blowfish_generic
blowfish_x86_64
blowfish_common
cast5
des_generic
cbc
cryptd
aes_x86_64
aes_generic
xcbc
rmd160
sha512_generic
sha256_generic
sha1_ssse3
sha1_generic
hmac
crypto_null
af_key
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
ext3
jbd
loop
firewire_sbp2
kvm_intel
kvm
stkwebcam
videodev
media
v4l2_compat_ioctl32
snd_hda_codec_si3054
snd_hda_codec_realtek
arc4
snd_hda_intel
snd_hda_codec
iwl3945
snd_hwdep
iwl_legacy
snd_pcm
snd_seq
snd_timer
snd_seq_device
joydev
mac80211
iTCO_wdt
snd
iTCO_vendor_support
cfg80211
ac
battery
i2c_i801
btusb
soundcore
bluetooth
r592
evdev
memstick
power_supply
snd_page_alloc
rng_core
asus_laptop
sparse_keymap
pcspkr
input_polldev
rfkill
psmouse
serio_raw
processor
ext4
mbcache
jbd2
crc16
dm_mod
nouveau
sd_mod
crc_t10dif
sr_mod
cdrom
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
mxm_wmi
wmi
ata_generic
video
uhci_hcd
ata_piix
firewire_ohci
thermal
thermal_sys
firewire_core
crc_itu_t
sdhci_pci
sdhci
mmc_core
button
libata
scsi_mod
r8169
mii
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f9f00000-fdffffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1338]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe000000-fe0fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-fe9fffff
Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1212]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. A6J-Q008 [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe0e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 Webcam
Bus 004 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--- End Message ---