severity 674907 grave thanks On 2012-10-01, Bastian Blank wrote: > On Wed, Sep 26, 2012 at 06:13:58PM -0400, Antoine Beaupré wrote: >> Do you mind explaining why this bug was downgraded from grave (which had >> a justification) to normal? > > - It only affects itself, it is already the system. > - It does not break data. > - It does not open a security hole. > - It is not broken for many users. > > Please check the definition of severities again. I did before reporting this bug, but just because, I will do so again now: http://www.debian.org/Bugs/Developer.en.html#severities grave makes the package in question unusable or mostly so, or causes data loss, or introduces a security hole allowing access to the accounts of users who use the package. I had specifically mentionned why I set this to grave: > PS: this is marked as grave as it affects other parts of the system > and causes data loss (the time, namely). 1. it affects other parts of the system, the clock 2. it causes data loss (it "breaks" the time) It seems to be broken for many users, as we can see from the thread here. I will bump this back to grave, feel free to mark unreproducable. :) On Mon, Oct 01, 2012 at 03:21:36PM +0200, Bastian Blank wrote: > So? Since when is it broken? Squeeze was released 1.5 years ago and > noone mentioned a problem before this bug report was filed. This are > identical or mostly identical servers? This is broken since we upgraded to Squeeze, as I reported earlier: On Wed, Sep 26, 2012 at 01:02:56PM -0400, Antoine Beaupré wrote: > Some notes: > > * physical servers (not running Xen) using similar hardware and > Squeeze > do *not* exhibit similar problems. > > * this is a regression from Lenny, which didn't have clock problems > under Xen. On Mon, Oct 01, 2012 at 03:21:36PM +0200, Bastian Blank wrote: > > so, I think I'am not playing with words on the severity definition. > > Right now it seems to only affect two users. There are 3 separate "users", which I would qualify more as "admins" which are reporting this bug, but a lot more users are affected than this. If you want, I can organise the users of those domUs to voice their frustration with the shifting time on their virtual servers. This affects a *lot* of users. On Mon, Oct 01, 2012 at 02:33:05PM +0200, Bastian Blank wrote: > The TSC is unstable for whatever reason. > > Please provide complete kernel (dmesg) and hypervisor logs (xm dmesg). Attached. I assume you mean the kernel logs from the dom0, let me know if you need the domU output. > Please check if the machines runs the latest firmware. I do not think this is related to the firmware. We have similar problems on *all* of our machines running Xen, regardless of the CPU or motherboard installed on those machines. Identical machines *not* running Xen do *not* exhibit this behavior. > Does it also happen with the testing versions of either Xen or Linux? We are investigating this and expect to deliver results here in the coming weeks. A.
(XEN) Xen version 4.0.1 (Debian 4.0.1-5.2) (fw@deneb.enyo.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) Thu Jun 21 06:41:09 UTC 2012 (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 (XEN) Command line: placeholder dom0_mem=512M (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d000 (usable) (XEN) 000000000009d000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000009f91b000 (usable) (XEN) 000000009f91b000 - 000000009f9d2000 (ACPI NVS) (XEN) 000000009f9d2000 - 000000009fa32000 (usable) (XEN) 000000009fa32000 - 000000009fa9a000 (reserved) (XEN) 000000009fa9a000 - 000000009fab4000 (usable) (XEN) 000000009fab4000 - 000000009fb1a000 (ACPI NVS) (XEN) 000000009fb1a000 - 000000009fb28000 (usable) (XEN) 000000009fb28000 - 000000009fb3a000 (ACPI data) (XEN) 000000009fb3a000 - 000000009fc00000 (usable) (XEN) 000000009fc00000 - 00000000b0000000 (reserved) (XEN) 00000000ffe00000 - 00000000ffe0c000 (reserved) (XEN) 0000000100000000 - 0000000460000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL ) (XEN) ACPI: XSDT 9FB39120, 007C (r1 INTEL S5000VCL 0 INTL 1000013) (XEN) ACPI: FACP 9FB37000, 00F4 (r3 INTEL S5000VCL 0 INTL 1000013) (XEN) ACPI: DSDT 9FB31000, 4CAE (r2 INTEL S5000VCL 8 INTL 1000013) (XEN) ACPI: FACS 9FAB4000, 0040 (XEN) ACPI: APIC 9FB36000, 00C8 (r1 INTEL S5000VCL 0 INTL 1000013) (XEN) ACPI: SPCR 9FB30000, 0050 (r1 INTEL S5000VCL 0 INTL 1000013) (XEN) ACPI: HPET 9FB2F000, 0038 (r1 INTEL S5000VCL 1 INTL 1000013) (XEN) ACPI: MCFG 9FB2E000, 003C (r1 INTEL S5000VCL 1 INTL 1000013) (XEN) ACPI: SSDT 9FB2D000, 0193 (r2 INTEL IPMI 4000 INTL 20060317) (XEN) ACPI: SSDT 9FB2C000, 02D4 (r2 INTEL CST 4000 INTL 20060317) (XEN) ACPI: HEST 9FB2B000, 00A8 (r1 INTEL S5000VCL 1 INTL 1) (XEN) ACPI: BERT 9FB2A000, 0030 (r1 INTEL S5000VCL 1 INTL 1) (XEN) ACPI: ERST 9FB29000, 0230 (r1 INTEL S5000VCL 1 INTL 1) (XEN) ACPI: EINJ 9FB28000, 0130 (r1 INTEL S5000VCL 1 INTL 1) (XEN) System RAM: 16378MB (16771096kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #2 7:7 APIC version 20 (XEN) Processor #4 7:7 APIC version 20 (XEN) Processor #6 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) Processor #3 7:7 APIC version 20 (XEN) Processor #5 7:7 APIC version 20 (XEN) Processor #7 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1995.044 MHz processor. (XEN) Initing memory sharing. (XEN) CPU0: VMX disabled by BIOS. (XEN) VMX: failed to initialise. (XEN) I/O virtualisation disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 8 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) Brought up 8 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000450000000->0000000454000000 (114688 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81708000 (XEN) Init. ramdisk: ffffffff81708000->ffffffff833fa200 (XEN) Phys-Mach map: ffffffff833fb000->ffffffff834fb000 (XEN) Start info: ffffffff834fb000->ffffffff834fb4b4 (XEN) Page tables: ffffffff834fc000->ffffffff8351b000 (XEN) Boot stack: ffffffff8351b000->ffffffff8351c000 (XEN) TOTAL: ffffffff80000000->ffffffff83800000 (XEN) ENTRY ADDRESS: ffffffff81531200 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .............................................................................................................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 176kB init memory. (XEN) Platform timer appears to have unexpectedly wrapped 10 or more times.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5- [ 0.000000] Command line: placeholder root=/dev/mapper/root-slash ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] Xen: 000000000009d000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 000000009f91b000 - 000000009f9d2000 (ACPI NVS) [ 0.000000] Xen: 000000009fa32000 - 000000009fa9a000 (reserved) [ 0.000000] Xen: 000000009fab4000 - 000000009fb1a000 (ACPI NVS) [ 0.000000] Xen: 000000009fb28000 - 000000009fb3a000 (ACPI data) [ 0.000000] Xen: 000000009fc00000 - 00000000b0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 00000000ffe0c000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] 0000000000 - 0020000000 page 4k [ 0.000000] kernel direct mapping tables up to 20000000 @ 100000-202000 [ 0.000000] RAMDISK: 01708000 - 033fa200 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 000000009fb39120 0007C (v01 INTEL S5000VCL 00000000 INTL 01000013) [ 0.000000] ACPI: FACP 000000009fb37000 000F4 (v03 INTEL S5000VCL 00000000 INTL 01000013) [ 0.000000] ACPI: DSDT 000000009fb31000 04CAE (v02 INTEL S5000VCL 00000008 INTL 01000013) [ 0.000000] ACPI: FACS 000000009fab4000 00040 [ 0.000000] ACPI: APIC 000000009fb36000 000C8 (v01 INTEL S5000VCL 00000000 INTL 01000013) [ 0.000000] ACPI: SPCR 000000009fb30000 00050 (v01 INTEL S5000VCL 00000000 INTL 01000013) [ 0.000000] ACPI: HPET 000000009fb2f000 00038 (v01 INTEL S5000VCL 00000001 INTL 01000013) [ 0.000000] ACPI: MCFG 000000009fb2e000 0003C (v01 INTEL S5000VCL 00000001 INTL 01000013) [ 0.000000] ACPI: SSDT 000000009fb2d000 00193 (v02 INTEL IPMI 00004000 INTL 20060317) [ 0.000000] ACPI: SSDT 000000009fb2c000 002D4 (v02 INTEL CST 00004000 INTL 20060317) [ 0.000000] ACPI: HEST 000000009fb2b000 000A8 (v01 INTEL S5000VCL 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000009fb2a000 00030 (v01 INTEL S5000VCL 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000009fb29000 00230 (v01 INTEL S5000VCL 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000009fb28000 00130 (v01 INTEL S5000VCL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000020000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000013fff] pages 4 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [00034fc000 - 000351b000] XEN PAGETABLES ==> [00034fc000 - 000351b000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00016e7b44] TEXT DATA BSS ==> [0001000000 - 00016e7b44] [ 0.000000] #4 [0001708000 - 00033fa200] RAMDISK ==> [0001708000 - 00033fa200] [ 0.000000] #5 [00033fb000 - 00034fc000] XEN START INFO ==> [00033fb000 - 00034fc000] [ 0.000000] #6 [00016e8000 - 00016e8264] BRK ==> [00016e8000 - 00016e8264] [ 0.000000] #7 [0000100000 - 00001e0000] PGTABLE ==> [0000100000 - 00001e0000] [ 0.000000] found SMP MP-table at [ffff8800000fdcc0] fdcc0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130973 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 227 pages reserved [ 0.000000] DMA zone: 3714 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-24 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 280 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:7f91b000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003551000 s90328 r8192 d24360 u122880 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] trying to map vcpu_info 0 at ffff88000355c020, mfn 45355c, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff88000355c020 [ 0.000000] trying to map vcpu_info 1 at ffff88000357a020, mfn 45357a, offset 32 [ 0.000000] cpu 1 using vcpu_info at ffff88000357a020 [ 0.000000] trying to map vcpu_info 2 at ffff880003598020, mfn 453598, offset 32 [ 0.000000] cpu 2 using vcpu_info at ffff880003598020 [ 0.000000] trying to map vcpu_info 3 at ffff8800035b6020, mfn 4535b6, offset 32 [ 0.000000] cpu 3 using vcpu_info at ffff8800035b6020 [ 0.000000] trying to map vcpu_info 4 at ffff8800035d4020, mfn 4535d4, offset 32 [ 0.000000] cpu 4 using vcpu_info at ffff8800035d4020 [ 0.000000] trying to map vcpu_info 5 at ffff8800035f2020, mfn 4535f2, offset 32 [ 0.000000] cpu 5 using vcpu_info at ffff8800035f2020 [ 0.000000] trying to map vcpu_info 6 at ffff880003610020, mfn 453610, offset 32 [ 0.000000] cpu 6 using vcpu_info at ffff880003610020 [ 0.000000] trying to map vcpu_info 7 at ffff88000362e020, mfn 45362e, offset 32 [ 0.000000] cpu 7 using vcpu_info at ffff88000362e020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 128954 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: placeholder root=/dev/mapper/root-slash ro quiet [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880004022000 - ffff880008022000 [ 0.000000] DMA: software IO TLB at phys 0x4022000 - 0x8022000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880004022000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880008082000 size=32768 [ 0.000000] Memory: 410716k/524288k available (3152k kernel code, 396k absent, 113176k reserved, 2064k data, 604k in [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:2304 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 2303 on node -1 [ 0.000000] alloc kstat_irqs on node -1 [ 0.000000] Detected 1995.044 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.08 BogoMIPS (lpj=7980176 [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 0/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.004000] SMP alternatives: switching to UP code [ 0.004000] ACPI: Core revision 20090903 [ 0.016153] alloc irq_desc for 2302 on node -1 [ 0.016158] alloc kstat_irqs on node -1 [ 0.016171] alloc irq_desc for 2301 on node -1 [ 0.016173] alloc kstat_irqs on node -1 [ 0.016180] alloc irq_desc for 2300 on node -1 [ 0.016182] alloc kstat_irqs on node -1 [ 0.016189] alloc irq_desc for 2299 on node -1 [ 0.016191] alloc kstat_irqs on node -1 [ 0.016483] installing Xen timer for CPU 1 [ 0.016488] alloc irq_desc for 2298 on node -1 [ 0.016490] alloc kstat_irqs on node -1 [ 0.016535] SMP alternatives: switching to SMP code [ 0.024001] alloc irq_desc for 2297 on node -1 [ 0.024001] alloc kstat_irqs on node -1 [ 0.024008] alloc irq_desc for 2296 on node -1 [ 0.024011] alloc kstat_irqs on node -1 [ 0.024017] alloc irq_desc for 2295 on node -1 [ 0.024020] alloc kstat_irqs on node -1 [ 0.024026] alloc irq_desc for 2294 on node -1 [ 0.024029] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#1 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 1/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.024309] installing Xen timer for CPU 2 [ 0.024314] alloc irq_desc for 2293 on node -1 [ 0.024317] alloc kstat_irqs on node -1 [ 0.024348] alloc irq_desc for 2292 on node -1 [ 0.024351] alloc kstat_irqs on node -1 [ 0.024358] alloc irq_desc for 2291 on node -1 [ 0.024361] alloc kstat_irqs on node -1 [ 0.024367] alloc irq_desc for 2290 on node -1 [ 0.024370] alloc kstat_irqs on node -1 [ 0.024376] alloc irq_desc for 2289 on node -1 [ 0.024379] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#2 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 2/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 0 [ 0.024643] installing Xen timer for CPU 3 [ 0.024648] alloc irq_desc for 2288 on node -1 [ 0.024651] alloc kstat_irqs on node -1 [ 0.024681] alloc irq_desc for 2287 on node -1 [ 0.024684] alloc kstat_irqs on node -1 [ 0.024691] alloc irq_desc for 2286 on node -1 [ 0.024694] alloc kstat_irqs on node -1 [ 0.024701] alloc irq_desc for 2285 on node -1 [ 0.024704] alloc kstat_irqs on node -1 [ 0.024710] alloc irq_desc for 2284 on node -1 [ 0.024713] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#3 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 3/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 2 [ 0.024979] installing Xen timer for CPU 4 [ 0.024984] alloc irq_desc for 2283 on node -1 [ 0.024987] alloc kstat_irqs on node -1 [ 0.025017] alloc irq_desc for 2282 on node -1 [ 0.025024] alloc kstat_irqs on node -1 [ 0.025031] alloc irq_desc for 2281 on node -1 [ 0.025034] alloc kstat_irqs on node -1 [ 0.025041] alloc irq_desc for 2280 on node -1 [ 0.025043] alloc kstat_irqs on node -1 [ 0.025050] alloc irq_desc for 2279 on node -1 [ 0.025052] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#4 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 4/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.025263] installing Xen timer for CPU 5 [ 0.025268] alloc irq_desc for 2278 on node -1 [ 0.025271] alloc kstat_irqs on node -1 [ 0.025299] alloc irq_desc for 2277 on node -1 [ 0.025302] alloc kstat_irqs on node -1 [ 0.025309] alloc irq_desc for 2276 on node -1 [ 0.025312] alloc kstat_irqs on node -1 [ 0.025324] alloc irq_desc for 2275 on node -1 [ 0.025327] alloc kstat_irqs on node -1 [ 0.025333] alloc irq_desc for 2274 on node -1 [ 0.025336] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#5 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 5/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.025533] installing Xen timer for CPU 6 [ 0.025538] alloc irq_desc for 2273 on node -1 [ 0.025541] alloc kstat_irqs on node -1 [ 0.025570] alloc irq_desc for 2272 on node -1 [ 0.025573] alloc kstat_irqs on node -1 [ 0.025580] alloc irq_desc for 2271 on node -1 [ 0.025583] alloc kstat_irqs on node -1 [ 0.025594] alloc irq_desc for 2270 on node -1 [ 0.025596] alloc kstat_irqs on node -1 [ 0.025603] alloc irq_desc for 2269 on node -1 [ 0.025605] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#6 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 6/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 1 [ 0.025811] installing Xen timer for CPU 7 [ 0.025817] alloc irq_desc for 2268 on node -1 [ 0.025820] alloc kstat_irqs on node -1 [ 0.025849] alloc irq_desc for 2267 on node -1 [ 0.025852] alloc kstat_irqs on node -1 [ 0.025859] alloc irq_desc for 2266 on node -1 [ 0.025862] alloc kstat_irqs on node -1 [ 0.025868] alloc irq_desc for 2265 on node -1 [ 0.025871] alloc kstat_irqs on node -1 [ 0.025877] alloc irq_desc for 2264 on node -1 [ 0.025880] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#7 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 7/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 3 [ 0.025999] Brought up 8 CPUs [ 0.026056] CPU0 attaching sched-domain: [ 0.026060] domain 0: span 0-7 level CPU [ 0.026064] groups: group ffff880003560d00 cpus 0 group ffff88000357ed00 cpus 1 group ffff88000359cd00 cpus 2 group ffff880003632d00 cpus 7 [ 0.026087] CPU1 attaching sched-domain: [ 0.026090] domain 0: span 0-7 level CPU [ 0.026094] groups: group ffff88000357ed00 cpus 1 group ffff88000359cd00 cpus 2 group ffff8800035bad00 cpus 3 group ffff880003560d00 cpus 0 [ 0.026115] CPU2 attaching sched-domain: [ 0.026118] domain 0: span 0-7 level CPU [ 0.026122] groups: group ffff88000359cd00 cpus 2 group ffff8800035bad00 cpus 3 group ffff8800035d8d00 cpus 4 group ffff88000357ed00 cpus 1 [ 0.026143] CPU3 attaching sched-domain: [ 0.026145] domain 0: span 0-7 level CPU [ 0.026149] groups: group ffff8800035bad00 cpus 3 group ffff8800035d8d00 cpus 4 group ffff8800035f6d00 cpus 5 group ffff88000359cd00 cpus 2 [ 0.026170] CPU4 attaching sched-domain: [ 0.026173] domain 0: span 0-7 level CPU [ 0.026176] groups: group ffff8800035d8d00 cpus 4 group ffff8800035f6d00 cpus 5 group ffff880003614d00 cpus 6 group ffff8800035bad00 cpus 3 [ 0.026197] CPU5 attaching sched-domain: [ 0.026199] domain 0: span 0-7 level CPU [ 0.026203] groups: group ffff8800035f6d00 cpus 5 group ffff880003614d00 cpus 6 group ffff880003632d00 cpus 7 group ffff8800035d8d00 cpus 4 [ 0.026224] CPU6 attaching sched-domain: [ 0.026227] domain 0: span 0-7 level CPU [ 0.026230] groups: group ffff880003614d00 cpus 6 group ffff880003632d00 cpus 7 group ffff880003560d00 cpus 0 group ffff8800035f6d00 cpus 5 [ 0.026251] CPU7 attaching sched-domain: [ 0.026254] domain 0: span 0-7 level CPU [ 0.026257] groups: group ffff880003632d00 cpus 7 group ffff880003560d00 cpus 0 group ffff88000357ed00 cpus 1 group ffff880003614d00 cpus 6 [ 0.026430] devtmpfs: initialized [ 0.029992] Grant table initialized [ 0.029992] regulator: core version 0.5 [ 0.029992] NET: Registered protocol family 16 [ 0.029992] alloc irq_desc for 2263 on node -1 [ 0.029992] alloc kstat_irqs on node -1 [ 0.029992] ACPI: bus type pci registered [ 0.029992] sync cpu 0 get result 1 max_id 7 [ 0.029992] sync cpu 1 get result 1 max_id 7 [ 0.029992] sync cpu 2 get result 1 max_id 7 [ 0.029992] sync cpu 3 get result 1 max_id 7 [ 0.029992] sync cpu 4 get result 1 max_id 7 [ 0.029992] sync cpu 5 get result 1 max_id 7 [ 0.029992] sync cpu 6 get result 1 max_id 7 [ 0.029992] sync cpu 7 get result 1 max_id 7 [ 0.029992] alloc irq_desc for 2262 on node -1 [ 0.029992] alloc kstat_irqs on node -1 [ 0.029992] PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255 [ 0.029992] PCI: MCFG area at a0000000 reserved in E820 [ 0.093200] PCI: Using MMCONFIG at a0000000 - afffffff [ 0.093203] PCI: Using configuration type 1 for base access [ 0.093786] bio: create slab <bio-0> at 0 [ 0.093786] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.096009] ACPI: EC: Look up EC in DSDT [ 0.098219] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) [ 0.098230] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88001fc1ec60), AE_AML_BU [ 0.103417] ACPI: Interpreter enabled [ 0.103421] ACPI: (supports S0 S1 S4 S5) [ 0.103458] ACPI: Using IOAPIC for interrupt routing [ 0.111415] ACPI: No dock devices found. [ 0.116307] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.116509] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.116516] pci 0000:00:00.0: PME# disabled [ 0.116695] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.116702] pci 0000:00:02.0: PME# disabled [ 0.116870] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.116877] pci 0000:00:03.0: PME# disabled [ 0.116962] pci 0000:00:08.0: reg 10 64bit mmio: [0xfe700000-0xfe7003ff] [ 0.117072] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 0.117079] pci 0000:00:08.0: PME# disabled [ 0.117870] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.117877] pci 0000:00:1c.0: PME# disabled [ 0.117990] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] [ 0.118099] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] [ 0.118209] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] [ 0.118318] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f] [ 0.118436] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb8b00400-0xb8b007ff] [ 0.118571] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.118579] pci 0000:00:1d.7: PME# disabled [ 0.118877] pci 0000:00:1f.1: reg 10 io port: [0x30d8-0x30df] [ 0.118890] pci 0000:00:1f.1: reg 14 io port: [0x30ec-0x30ef] [ 0.118903] pci 0000:00:1f.1: reg 18 io port: [0x30d0-0x30d7] [ 0.118916] pci 0000:00:1f.1: reg 1c io port: [0x30e8-0x30eb] [ 0.118928] pci 0000:00:1f.1: reg 20 io port: [0x30b0-0x30bf] [ 0.119022] pci 0000:00:1f.2: reg 10 io port: [0x30c8-0x30cf] [ 0.119034] pci 0000:00:1f.2: reg 14 io port: [0x30e4-0x30e7] [ 0.119046] pci 0000:00:1f.2: reg 18 io port: [0x30c0-0x30c7] [ 0.119058] pci 0000:00:1f.2: reg 1c io port: [0x30e0-0x30e3] [ 0.119070] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af] [ 0.119082] pci 0000:00:1f.2: reg 24 32bit mmio: [0xb8b00000-0xb8b003ff] [ 0.119146] pci 0000:00:1f.2: PME# supported from D3hot [ 0.119154] pci 0000:00:1f.2: PME# disabled [ 0.119242] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] [ 0.120001] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.120001] pci 0000:01:00.0: PME# disabled [ 0.120001] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold [ 0.120001] pci 0000:01:00.3: PME# disabled [ 0.120001] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.120001] pci 0000:00:02.0: bridge io port: [0x2000-0x2fff] [ 0.120001] pci 0000:00:02.0: bridge 32bit mmio: [0xb8000000-0xb89fffff] [ 0.120001] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.120001] pci 0000:02:00.0: PME# disabled [ 0.120001] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.123028] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.123119] pci 0000:02:02.0: PME# disabled [ 0.123808] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.124001] pci 0000:01:00.0: bridge io port: [0x2000-0x2fff] [ 0.124001] pci 0000:01:00.0: bridge 32bit mmio: [0xb8000000-0xb88fffff] [ 0.124001] pci 0000:04:00.0: reg 10 32bit mmio: [0xb8820000-0xb883ffff] [ 0.124001] pci 0000:04:00.0: reg 14 32bit mmio: [0xb8400000-0xb87fffff] [ 0.124001] pci 0000:04:00.0: reg 18 io port: [0x2020-0x203f] [ 0.124001] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.124001] pci 0000:04:00.0: PME# disabled [ 0.124001] pci 0000:04:00.1: reg 10 32bit mmio: [0xb8800000-0xb881ffff] [ 0.124001] pci 0000:04:00.1: reg 14 32bit mmio: [0xb8000000-0xb83fffff] [ 0.124001] pci 0000:04:00.1: reg 18 io port: [0x2000-0x201f] [ 0.124001] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.124001] pci 0000:04:00.1: PME# disabled [ 0.124001] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.124001] pci 0000:02:02.0: bridge io port: [0x2000-0x2fff] [ 0.124001] pci 0000:02:02.0: bridge 32bit mmio: [0xb8000000-0xb88fffff] [ 0.124102] pci 0000:08:0c.0: reg 10 32bit mmio pref: [0xb0000000-0xb7ffffff] [ 0.124116] pci 0000:08:0c.0: reg 14 io port: [0x1000-0x10ff] [ 0.124129] pci 0000:08:0c.0: reg 18 32bit mmio: [0xb8a00000-0xb8a0ffff] [ 0.124173] pci 0000:08:0c.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.124233] pci 0000:08:0c.0: supports D1 D2 [ 0.124305] pci 0000:00:1e.0: transparent bridge [ 0.124313] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] [ 0.124321] pci 0000:00:1e.0: bridge 32bit mmio: [0xb8a00000-0xb8afffff] [ 0.124333] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xb0000000-0xb7ffffff] [ 0.124376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.125132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.125203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.125394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.125515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT] [ 0.125703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] [ 0.125962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] [ 0.126104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] [ 0.136852] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) [ 0.137014] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) [ 0.137174] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) [ 0.137333] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) [ 0.137492] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) [ 0.137651] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) [ 0.137809] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) [ 0.137968] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) [ 0.138070] xen_balloon: Initialising balloon driver with page order 0. [ 0.138164] vgaarb: device added: PCI:0000:08:0c.0,decodes=io+mem,owns=io+mem,locks=none [ 0.138168] vgaarb: loaded [ 0.138214] PCI: Using ACPI for IRQ routing [ 0.138214] Switching to clocksource xen [ 0.138310] pnp: PnP ACPI init [ 0.138342] ACPI: bus type pnp registered [ 0.143913] xen: registering gsi 8 triggering 1 polarity 0 [ 0.143917] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.143920] xen: --> irq=8 [ 0.143990] xen: registering gsi 13 triggering 1 polarity 0 [ 0.143993] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.143996] xen: --> irq=13 [ 0.144242] xen: registering gsi 12 triggering 1 polarity 0 [ 0.144245] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.144248] xen: --> irq=12 [ 0.144336] xen: registering gsi 1 triggering 1 polarity 0 [ 0.144339] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.144342] xen: --> irq=1 [ 0.144863] xen: registering gsi 4 triggering 1 polarity 0 [ 0.144867] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.144869] xen: --> irq=4 [ 0.145490] xen: registering gsi 3 triggering 1 polarity 0 [ 0.145493] xen_allocate_pirq: returning irq 3 for gsi 3 [ 0.145496] xen: --> irq=3 [ 0.146114] pnp: PnP ACPI: found 14 devices [ 0.146117] ACPI: ACPI bus type pnp unregistered [ 0.146132] system 00:01: iomem range 0xa0000000-0xafffffff has been reserved [ 0.146137] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.146142] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.146146] system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.146151] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.146155] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 0.146160] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 0.146164] system 00:01: iomem range 0x0-0x9ffff could not be reserved [ 0.146174] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.146178] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.146183] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.146187] system 00:06: ioport range 0xca0-0xcaf has been reserved [ 0.146191] system 00:06: ioport range 0x161-0x161 has been reserved [ 0.146195] system 00:06: ioport range 0x162-0x162 has been reserved [ 0.152540] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.153690] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 0.153694] pci 0000:02:00.0: IO window: disabled [ 0.153755] pci 0000:02:00.0: MEM window: disabled [ 0.153755] pci 0000:02:00.0: PREFETCH window: disabled [ 0.153755] pci 0000:02:02.0: PCI bridge, secondary bus 0000:04 [ 0.153755] pci 0000:02:02.0: IO window: 0x2000-0x2fff [ 0.153755] pci 0000:02:02.0: MEM window: 0xb8000000-0xb88fffff [ 0.153755] pci 0000:02:02.0: PREFETCH window: disabled [ 0.153755] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.153755] pci 0000:01:00.0: IO window: 0x2000-0x2fff [ 0.153755] pci 0000:01:00.0: MEM window: 0xb8000000-0xb88fffff [ 0.153755] pci 0000:01:00.0: PREFETCH window: disabled [ 0.153755] pci 0000:01:00.3: PCI bridge, secondary bus 0000:05 [ 0.153755] pci 0000:01:00.3: IO window: disabled [ 0.153755] pci 0000:01:00.3: MEM window: disabled [ 0.153755] pci 0000:01:00.3: PREFETCH window: disabled [ 0.153755] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.153755] pci 0000:00:02.0: IO window: 0x2000-0x2fff [ 0.153755] pci 0000:00:02.0: MEM window: 0xb8000000-0xb89fffff [ 0.153755] pci 0000:00:02.0: PREFETCH window: disabled [ 0.153755] pci 0000:00:03.0: PCI bridge, secondary bus 0000:06 [ 0.153755] pci 0000:00:03.0: IO window: disabled [ 0.153755] pci 0000:00:03.0: MEM window: disabled [ 0.153755] pci 0000:00:03.0: PREFETCH window: disabled [ 0.153755] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07 [ 0.153755] pci 0000:00:1c.0: IO window: 0x4000-0x4fff [ 0.153755] pci 0000:00:1c.0: MEM window: 0x20000000-0x201fffff [ 0.153755] pci 0000:00:1c.0: PREFETCH window: 0x00000020200000-0x000000203fffff [ 0.153755] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.153755] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 0.153755] pci 0000:00:1e.0: MEM window: 0xb8a00000-0xb8afffff [ 0.153755] pci 0000:00:1e.0: PREFETCH window: 0x000000b0000000-0x000000b7ffffff [ 0.153755] xen: registering gsi 16 triggering 0 polarity 1 [ 0.153755] alloc irq_desc for 16 on node -1 [ 0.153755] alloc kstat_irqs on node -1 [ 0.155586] xen: --> irq=16 [ 0.155594] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.155603] pci 0000:00:02.0: setting latency timer to 64 [ 0.155789] xen: registering gsi 16 triggering 0 polarity 1 [ 0.155792] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.155795] xen: --> irq=16 [ 0.155798] Already setup the GSI :16 [ 0.155801] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.155880] pci 0000:01:00.0: setting latency timer to 64 [ 0.156110] xen: registering gsi 16 triggering 0 polarity 1 [ 0.156113] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.156116] xen: --> irq=16 [ 0.156119] Already setup the GSI :16 [ 0.156122] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.156201] pci 0000:02:00.0: setting latency timer to 64 [ 0.156431] xen: registering gsi 18 triggering 0 polarity 1 [ 0.156439] alloc irq_desc for 18 on node -1 [ 0.156442] alloc kstat_irqs on node -1 [ 0.156446] xen: --> irq=18 [ 0.156452] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.156523] pci 0000:02:02.0: setting latency timer to 64 [ 0.156844] pci 0000:01:00.3: setting latency timer to 64 [ 0.156898] xen: registering gsi 16 triggering 0 polarity 1 [ 0.156901] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.156904] xen: --> irq=16 [ 0.156907] Already setup the GSI :16 [ 0.156910] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.156917] pci 0000:00:03.0: setting latency timer to 64 [ 0.156932] xen: registering gsi 16 triggering 0 polarity 1 [ 0.156935] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.156938] xen: --> irq=16 [ 0.156941] Already setup the GSI :16 [ 0.156944] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.156951] pci 0000:00:1c.0: setting latency timer to 64 [ 0.156965] pci 0000:00:1e.0: setting latency timer to 64 [ 0.156971] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.156975] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.156979] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.156982] pci_bus 0000:01: resource 1 mem: [0xb8000000-0xb89fffff] [ 0.156985] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.156989] pci_bus 0000:02: resource 1 mem: [0xb8000000-0xb88fffff] [ 0.156992] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] [ 0.156995] pci_bus 0000:04: resource 1 mem: [0xb8000000-0xb88fffff] [ 0.156999] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff] [ 0.157003] pci_bus 0000:07: resource 1 mem: [0x20000000-0x201fffff] [ 0.157006] pci_bus 0000:07: resource 2 pref mem [0x20200000-0x203fffff] [ 0.157010] pci_bus 0000:08: resource 0 io: [0x1000-0x1fff] [ 0.157013] pci_bus 0000:08: resource 1 mem: [0xb8a00000-0xb8afffff] [ 0.157017] pci_bus 0000:08: resource 2 pref mem [0xb0000000-0xb7ffffff] [ 0.157021] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.157024] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.157064] NET: Registered protocol family 2 [ 0.157180] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.157509] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.157680] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.157795] TCP: Hash tables configured (established 16384 bind 16384) [ 0.157798] TCP reno registered [ 0.157920] NET: Registered protocol family 1 [ 0.157958] xen: registering gsi 23 triggering 0 polarity 1 [ 0.157966] alloc irq_desc for 23 on node -1 [ 0.157969] alloc kstat_irqs on node -1 [ 0.157973] xen: --> irq=23 [ 0.157980] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.158008] pci 0000:00:1d.0: PCI INT A disabled [ 0.158017] xen: registering gsi 22 triggering 0 polarity 1 [ 0.158024] alloc irq_desc for 22 on node -1 [ 0.158027] alloc kstat_irqs on node -1 [ 0.158031] xen: --> irq=22 [ 0.158036] pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.158063] pci 0000:00:1d.1: PCI INT B disabled [ 0.158071] xen: registering gsi 23 triggering 0 polarity 1 [ 0.158074] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.158076] xen: --> irq=23 [ 0.158079] Already setup the GSI :23 [ 0.158083] pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 0.158109] pci 0000:00:1d.2: PCI INT C disabled [ 0.158117] xen: registering gsi 22 triggering 0 polarity 1 [ 0.158120] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.158122] xen: --> irq=22 [ 0.158125] Already setup the GSI :22 [ 0.158129] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 [ 0.158155] pci 0000:00:1d.3: PCI INT D disabled [ 0.158171] xen: registering gsi 23 triggering 0 polarity 1 [ 0.158174] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.158176] xen: --> irq=23 [ 0.158179] Already setup the GSI :23 [ 0.158182] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.158327] pci 0000:00:1d.7: PCI INT A disabled [ 0.158333] pci 0000:00:1f.0: rerouting interrupts for [8086:2670] [ 0.158355] pci 0000:08:0c.0: Boot video device [ 0.158411] Unpacking initramfs... [ 0.200171] Freeing initrd memory: 29640k freed [ 0.213390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.213398] DMA: Placing 64MB software IO TLB between ffff880004022000 - ffff880008022000 [ 0.213402] DMA: software IO TLB at phys 0x4022000 - 0x8022000 [ 0.214401] audit: initializing netlink socket (disabled) [ 0.214419] type=2000 audit(1340664682.017:1): initialized [ 0.217818] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.220067] VFS: Disk quotas dquot_6.5.2 [ 0.220125] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.220249] msgmni has been set to 860 [ 0.221040] alg: No test for stdrng (krng) [ 0.221113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.221118] io scheduler noop registered [ 0.221121] io scheduler anticipatory registered [ 0.221124] io scheduler deadline registered [ 0.221195] io scheduler cfq registered (default) [ 0.221449] alloc irq_desc for 2261 on node -1 [ 0.221453] alloc kstat_irqs on node -1 [ 0.221496] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.221707] alloc irq_desc for 2260 on node -1 [ 0.221711] alloc kstat_irqs on node -1 [ 0.221738] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.221956] alloc irq_desc for 2259 on node -1 [ 0.221959] alloc kstat_irqs on node -1 [ 0.221993] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.223504] pcieport 0000:01:00.0: setting latency timer to 64 [ 0.225755] alloc irq_desc for 2258 on node -1 [ 0.225755] alloc kstat_irqs on node -1 [ 0.227820] pcieport 0000:02:00.0: setting latency timer to 64 [ 0.231678] alloc irq_desc for 2257 on node -1 [ 0.231681] alloc kstat_irqs on node -1 [ 0.232411] pcieport 0000:02:02.0: setting latency timer to 64 [ 0.233917] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support [ 0.233927] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 0.244766] registering netback [ 0.244902] alloc irq_desc for 2256 on node -1 [ 0.244905] alloc kstat_irqs on node -1 [ 0.246607] alloc irq_desc for 2255 on node -1 [ 0.246611] alloc kstat_irqs on node -1 [ 0.247099] hpet_acpi_add: no address or irqs in _CRS [ 0.247125] Linux agpgart interface v0.103 [ 0.247190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.247330] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.247466] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.247832] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.248009] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.248201] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.248268] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.251295] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.251306] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.251478] mice: PS/2 mouse device common for all mice [ 0.251536] rtc_cmos 00:03: RTC can wake from S4 [ 0.251603] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.251639] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.251658] cpuidle: using governor ladder [ 0.251661] cpuidle: using governor menu [ 0.251667] No iBFT detected. [ 0.252037] TCP cubic registered [ 0.252180] NET: Registered protocol family 10 [ 0.253043] Mobile IPv6 [ 0.253047] NET: Registered protocol family 17 [ 0.253140] PM: Resume from disk failed. [ 0.253155] registered taskstats version 1 [ 0.257889] rtc_cmos 00:03: setting system clock to 2012-06-25 22:51:21 UTC (1340664681) [ 0.257964] Initalizing network drop monitor service [ 0.258067] Freeing unused kernel memory: 604k freed [ 0.258300] Write protecting the kernel read-only data: 4336k [ 0.298352] udev[127]: starting version 164 [ 0.326454] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 0.326458] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 0.326647] xen: registering gsi 18 triggering 0 polarity 1 [ 0.326654] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.326656] xen: --> irq=18 [ 0.326667] Already setup the GSI :18 [ 0.326673] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.327244] e1000e 0000:04:00.0: setting latency timer to 64 [ 0.329822] alloc irq_desc for 2254 on node -1 [ 0.329831] alloc kstat_irqs on node -1 [ 0.378646] usbcore: registered new interface driver usbfs [ 0.378701] usbcore: registered new interface driver hub [ 0.378818] usbcore: registered new device driver usb [ 0.382255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.382310] xen: registering gsi 23 triggering 0 polarity 1 [ 0.382315] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.382320] xen: --> irq=23 [ 0.382331] Already setup the GSI :23 [ 0.382340] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.382394] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.382402] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.382451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.382566] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.386465] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.386670] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb8b00400 [ 0.395990] SCSI subsystem initialized [ 0.400511] e1000e 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:1f:8c:bc [ 0.400515] e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.400595] e1000e 0000:04:00.0: eth0: MAC: 5, PHY: 5, PBA No: 400000-000 [ 0.400775] xen: registering gsi 19 triggering 0 polarity 1 [ 0.400793] alloc irq_desc for 19 on node -1 [ 0.400797] alloc kstat_irqs on node -1 [ 0.400804] xen: --> irq=19 [ 0.400817] e1000e 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.401254] e1000e 0000:04:00.1: setting latency timer to 64 [ 0.401767] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.401801] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.401805] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.401808] usb usb1: Product: EHCI Host Controller [ 0.401811] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 0.401814] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.401911] usb usb1: configuration #1 chosen from 1 choice [ 0.401948] hub 1-0:1.0: USB hub found [ 0.401971] hub 1-0:1.0: 8 ports detected [ 0.401254] alloc irq_desc for 2253 on node -1 [ 0.401254] alloc kstat_irqs on node -1 [ 0.411022] libata version 3.00 loaded. [ 0.413871] ata_piix 0000:00:1f.1: version 2.13 [ 0.413897] xen: registering gsi 20 triggering 0 polarity 1 [ 0.413918] alloc irq_desc for 20 on node -1 [ 0.413922] alloc kstat_irqs on node -1 [ 0.413930] xen: --> irq=20 [ 0.413944] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.414014] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.414357] scsi0 : ata_piix [ 0.414527] scsi1 : ata_piix [ 0.415510] uhci_hcd: USB Universal Host Controller Interface driver [ 0.417826] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 [ 0.417831] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 [ 0.417873] xen: registering gsi 23 triggering 0 polarity 1 [ 0.417876] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.417879] xen: --> irq=23 [ 0.417883] Already setup the GSI :23 [ 0.417887] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.417901] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.417906] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.417926] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.417974] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 0.418067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.418071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.418074] usb usb2: Product: UHCI Host Controller [ 0.418077] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.418080] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.418200] usb usb2: configuration #1 chosen from 1 choice [ 0.418240] hub 2-0:1.0: USB hub found [ 0.418260] hub 2-0:1.0: 2 ports detected [ 0.418355] xen: registering gsi 20 triggering 0 polarity 1 [ 0.418358] xen_allocate_pirq: returning irq 20 for gsi 20 [ 0.418361] xen: --> irq=20 [ 0.418365] Already setup the GSI :20 [ 0.418368] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.418377] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.418429] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.418569] scsi2 : ata_piix [ 0.418778] scsi3 : ata_piix [ 0.422127] ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30e4 bmdma 0x30a0 irq 20 [ 0.422131] ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e0 bmdma 0x30a8 irq 20 [ 0.422198] xen: registering gsi 22 triggering 0 polarity 1 [ 0.422201] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.422204] xen: --> irq=22 [ 0.422208] Already setup the GSI :22 [ 0.422212] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.422225] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.422230] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.422242] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.422295] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00003060 [ 0.422371] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.422375] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.422378] usb usb3: Product: UHCI Host Controller [ 0.422381] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.422384] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.422454] usb usb3: configuration #1 chosen from 1 choice [ 0.422488] hub 3-0:1.0: USB hub found [ 0.422507] hub 3-0:1.0: 2 ports detected [ 0.422572] xen: registering gsi 23 triggering 0 polarity 1 [ 0.422576] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.422579] xen: --> irq=23 [ 0.422582] Already setup the GSI :23 [ 0.422586] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 0.422598] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.422603] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.422614] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.422650] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00003040 [ 0.422718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.422721] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.422725] usb usb4: Product: UHCI Host Controller [ 0.422728] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.422730] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.422805] usb usb4: configuration #1 chosen from 1 choice [ 0.422839] hub 4-0:1.0: USB hub found [ 0.422856] hub 4-0:1.0: 2 ports detected [ 0.422922] xen: registering gsi 22 triggering 0 polarity 1 [ 0.422925] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.422928] xen: --> irq=22 [ 0.422931] Already setup the GSI :22 [ 0.422935] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 [ 0.422947] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.422952] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.422963] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.422999] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003020 [ 0.423068] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.423072] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.423075] usb usb5: Product: UHCI Host Controller [ 0.423078] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 0.423081] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.423152] usb usb5: configuration #1 chosen from 1 choice [ 0.423189] hub 5-0:1.0: USB hub found [ 0.423207] hub 5-0:1.0: 2 ports detected [ 0.471633] e1000e 0000:04:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:1f:8c:bd [ 0.471638] e1000e 0000:04:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 0.471715] e1000e 0000:04:00.1: eth1: MAC: 5, PHY: 5, PBA No: 400000-000 [ 0.596661] ata1.00: ATAPI: OPTIARC DVD-ROM DDU1678A, 1.00, max UDMA/33 [ 0.616256] ata1.00: configured for UDMA/33 [ 0.619251] scsi 0:0:0:0: CD-ROM OPTIARC DVD-ROM DDU1678A 1.00 PQ: 0 ANSI: 5 [ 0.638905] ata4.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 0.638909] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.639669] ata3.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 0.639673] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.705548] ata4.00: configured for UDMA/133 [ 0.706313] ata3.00: configured for UDMA/133 [ 0.706492] scsi 2:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 0.706794] scsi 3:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 0.716575] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.716682] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.716688] sd 2:0:0:0: [sda] Write Protect is off [ 0.716692] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.716794] sd 3:0:0:0: [sdb] Write Protect is off [ 0.716798] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.716846] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.716850] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.717157] sda: [ 0.717270] sdb:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 0.722831] Uniform CD-ROM driver Revision: 3.20 [ 0.723091] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.745175] sdb1 sdb2 [ 0.745790] sd 3:0:0:0: [sdb] Attached SCSI disk [ 0.745938] sda1 sda2 [ 0.746701] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.753212] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.753286] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.753326] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 0.929989] md: raid1 personality registered for level 1 [ 0.937398] mdadm: sending ioctl 1261 to a partition! [ 0.937402] mdadm: sending ioctl 1261 to a partition! [ 0.946321] mdadm: sending ioctl 1261 to a partition! [ 0.946324] mdadm: sending ioctl 1261 to a partition! [ 0.946705] mdadm: sending ioctl 1261 to a partition! [ 0.946708] mdadm: sending ioctl 1261 to a partition! [ 0.946932] mdadm: sending ioctl 1261 to a partition! [ 0.946935] mdadm: sending ioctl 1261 to a partition! [ 0.960536] md: md0 stopped. [ 0.960667] mdadm: sending ioctl 1261 to a partition! [ 0.960671] mdadm: sending ioctl 1261 to a partition! [ 0.991436] md: bind<sdb1> [ 0.991669] md: bind<sda1> [ 0.993906] raid1: raid set md0 active with 2 out of 2 mirrors [ 0.993937] md0: detected capacity change from 0 to 19998367744 [ 0.995793] md0: unknown partition table [ 1.201349] md: md1 stopped. [ 1.203200] md: bind<sdb2> [ 1.203400] md: bind<sda2> [ 1.205923] raid1: raid set md1 active with 2 out of 2 mirrors [ 1.205960] md1: detected capacity change from 0 to 480105062400 [ 1.207804] md1: unknown partition table [ 1.417479] device-mapper: uevent: version 1.0.3 [ 1.417824] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.923966] PM: Starting manual resume from disk [ 1.923971] PM: Resume from partition 253:1 [ 1.923973] PM: Checking hibernation image. [ 1.925542] PM: Error -22 checking image file [ 1.925545] PM: Resume from disk failed. [ 1.962544] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 3.001713] udev[437]: starting version 164 [ 3.206549] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.206570] ACPI: Sleep Button [SLPB] [ 3.206692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.206698] ACPI: Power Button [PWRF] [ 3.357780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.624771] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.673200] intel_rng: Firmware space is locked read-only. If you can't or [ 3.673202] intel_rng: don't want to disable this in firmware setup, and if [ 3.673204] intel_rng: you are certain that your system has a functional [ 3.673205] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 3.697660] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.717861] EDAC MC: Ver: 2.1.0 May 6 2012 [ 3.722171] xen: registering gsi 20 triggering 0 polarity 1 [ 3.722176] xen_allocate_pirq: returning irq 20 for gsi 20 [ 3.722179] xen: --> irq=20 [ 3.722187] Already setup the GSI :20 [ 3.722191] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 3.723211] dca service started, version 1.12.1 [ 3.734234] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 3.734518] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' [ 3.752269] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.752338] xen: registering gsi 16 triggering 0 polarity 1 [ 3.752343] xen_allocate_pirq: returning irq 16 for gsi 16 [ 3.752346] xen: --> irq=16 [ 3.752354] Already setup the GSI :16 [ 3.752358] ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.752393] ioatdma 0000:00:08.0: setting latency timer to 64 [ 3.752477] alloc irq_desc for 2252 on node -1 [ 3.752481] alloc kstat_irqs on node -1 [ 3.778307] [drm] Initialized drm 1.1.0 20060810 [ 3.851071] [drm] radeon defaulting to userspace modesetting. [ 3.851335] xen: registering gsi 17 triggering 0 polarity 1 [ 3.851353] alloc irq_desc for 17 on node -1 [ 3.851356] alloc kstat_irqs on node -1 [ 3.851362] xen: --> irq=17 [ 3.851374] pci 0000:08:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.851629] [drm] Initialized radeon 1.32.0 20080528 for 0000:08:0c.0 on minor 0 [ 3.913498] Error: Driver 'pcspkr' is already registered, aborting... [ 4.333688] loop: module loaded [ 8.343147] Adding 1953784k swap on /dev/mapper/root-swap. Priority:-1 extents:1 across:1953784k [ 9.116548] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.589311] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.240666] Event-channel device installed.> GSI 20 (level, low) -> IRQ 20 [ 3.723211] dca service started, version 1.12.1 [ 3.734234] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 3.734518] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' [ 3.752269] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.752338] xen: registering gsi 16 triggering 0 polarity 1 [ 3.752343] xen_allocate_pirq: returning irq 16 for gsi 16 [ 3.752346] xen: --> irq=16 [ 3.752354] Already setup the GSI :16 [ 3.752358] ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.752393] ioatdma 0000:00:08.0: setting latency timer to 64 [ 3.752477] alloc irq_desc for 2252 on node -1 [ 3.752481] alloc kstat_irqs on node -1 [ 3.778307] [drm] Initialized drm 1.1.0 20060810 [ 3.851071] [drm] radeon defaulting to userspace modesetting. [ 3.851335] xen: registering gsi 17 triggering 0 polarity 1 [ 3.851353] alloc irq_desc for 17 on node -1 [ 3.851356] alloc kstat_irqs on node -1 [ 3.851362] xen: --> irq=17 [ 3.851374] pci 0000:08:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.851629] [drm] Initialized radeon 1.32.0 20080528 for 0000:08:0c.0 on minor 0 [ 3.913498] Error: Driver 'pcspkr' is already registered, aborting... [ 4.333688] loop: module loaded [ 8.343147] Adding 1953784k swap on /dev/mapper/root-swap. Priority:-1 extents:1 across:1953784k [ 9.116548] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.589311] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.240666] Event-channel device installed.
--
Le péché est né avant la vertu, comme le moteur avant le frein.
- Jean-Paul Sartre
Attachment:
pgp925cdloVSi.pgp
Description: PGP signature