--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-2-686-pae: Elantech touchpad detected as PS2 mouse
- From: Nicola Alessi <nialessi@gmx.com>
- Date: Sun, 20 May 2012 01:32:07 +0200
- Message-id: <20120519233207.11454.65547.reportbug@ehehehpc>
Package: linux-2.6
Version: 3.2.16-1
Severity: normal
Tags: upstream
Hi,
I'm running linux-image-3.2.0-2-686-pae version 3.2.16-1 on debian wheezy. I
unsuccessfully tried version 3.2.17-1 from sid. The laptop is a Fujitsu Siemens
Amilo pi2515. My /proc/bus/input/devices says:
[...]
I: Bus=0011 Vendor=0002 Product=0001 Version=0063
N: Name="PS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input7
U: Uniq=
H: Handlers=mouse0 event7
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
[...]
Any hint?
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=ce754bd4-1e36-4c3a-9343-dfa48ae2e393 ro quiet splash
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3245.820683] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a)
[ 3245.820698] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
[ 3245.820704] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
[ 3245.820711] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 3245.820722] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 3245.820730] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 3245.820796] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820822] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 3245.820852] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820878] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 3245.820908] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820933] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 3245.820973] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 3245.820993] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 3245.821000] ehci_hcd 0000:00:1d.7: PME# disabled
[ 3245.821022] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 3245.821028] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 3245.821034] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 3245.821048] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
[ 3245.821101] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[ 3245.821122] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 3245.821149] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 3245.821173] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 3245.821200] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 3245.821255] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x80000000)
[ 3245.821335] iwl3945 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 3245.821404] iwl3945 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000)
[ 3245.821418] iwl3945 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3245.821438] iwl3945 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[ 3245.821586] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 3245.821613] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfa000004)
[ 3245.821623] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001)
[ 3245.821631] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3245.821642] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507)
[ 3245.821814] PM: early resume of devices complete after 1.710 msecs
[ 3245.821886] i915 0000:00:02.0: setting latency timer to 64
[ 3245.821931] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3245.821943] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3245.822073] usb usb3: root hub lost power or was reset
[ 3245.822113] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3245.822227] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3245.822534] usb usb4: root hub lost power or was reset
[ 3245.822613] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3245.822765] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3245.822996] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3245.823111] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3245.824207] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3245.825245] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[ 3245.825475] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 3245.825668] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[ 3245.825708] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3245.825860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3245.826168] usb usb5: root hub lost power or was reset
[ 3245.826207] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3245.826321] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3245.826514] usb usb6: root hub lost power or was reset
[ 3245.826553] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3245.826783] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3245.826923] usb usb7: root hub lost power or was reset
[ 3245.826938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3245.826946] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3245.826975] pci 0000:00:1e.0: setting latency timer to 64
[ 3245.826987] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3245.826992] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3245.827015] ahci 0000:00:1f.2: setting latency timer to 64
[ 3245.827086] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3245.827111] r8169 0000:06:00.0: wake-up capability disabled by ACPI
[ 3245.827119] r8169 0000:06:00.0: PME# disabled
[ 3245.828321] sd 0:0:0:0: [sda] Starting disk
[ 3246.040408] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 3246.040413] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 3246.144029] ata2: SATA link down (SStatus 0 SControl 300)
[ 3246.148037] ata3: SATA link down (SStatus 0 SControl 300)
[ 3246.168286] ata4.00: configured for UDMA/33
[ 3246.932032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3246.937056] ata1.00: unexpected _GTF length (8)
[ 3246.939278] ata1.00: unexpected _GTF length (8)
[ 3246.939632] ata1.00: configured for UDMA/133
[ 3247.015546] PM: resume of devices complete after 1193.690 msecs
[ 3247.015713] PM: Finishing wakeup.
[ 3247.015715] Restarting tasks ... done.
[ 3247.016333] video LNXVIDEO:00: Restoring backlight state
[ 3248.370219] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3248.373771] r8169 0000:06:00.0: eth0: link down
[ 3248.373999] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3256.678968] wlan0: authenticate with 00:12:17:bc:d1:8b (try 1)
[ 3256.680773] wlan0: authenticated
[ 3256.681135] wlan0: associate with 00:12:17:bc:d1:8b (try 1)
[ 3256.683549] wlan0: RX AssocResp from 00:12:17:bc:d1:8b (capab=0x411 status=0 aid=2)
[ 3256.683557] wlan0: associated
[ 3256.685308] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3257.639833] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 3267.472019] wlan0: no IPv6 routers present
[ 6835.525370] Netfilter messages via NETLINK v0.30.
[ 7008.464048] device wlan0 entered promiscuous mode
[ 7257.790686] device wlan0 left promiscuous mode
[ 7395.720843] device wlan0 entered promiscuous mode
[ 7401.097911] device wlan0 left promiscuous mode
[ 7725.876076] device wlan0 entered promiscuous mode
[ 9476.111946] device wlan0 left promiscuous mode
** Model information
not available
** Loaded modules:
nfnetlink_log
nfnetlink
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
pci_stub
snd_hrtimer
cryptd
aes_i586
aes_generic
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
kvm_intel
kvm
loop
snd_hda_codec_realtek
arc4
sr_mod
cdrom
snd_hda_codec_si3054
iwl3945
iwl_legacy
snd_hda_intel
mac80211
snd_hda_codec
ata_generic
snd_hwdep
snd_pcm_oss
uhci_hcd
cfg80211
snd_mixer_oss
ata_piix
snd_pcm
ehci_hcd
usbcore
r8169
rfkill
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
mii
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
iTCO_wdt
pcspkr
battery
processor
ac
iTCO_vendor_support
soundcore
i2c_i801
power_supply
psmouse
usb_common
serio_raw
evdev
ext4
crc16
jbd2
mbcache
sd_mod
crc_t10dif
i915
ahci
libahci
libata
i2c_algo_bit
drm_kms_helper
drm
scsi_mod
video
thermal
button
i2c_core
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc404c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 1c00 [size=8]
Region 1: I/O ports at 18d4 [size=4]
Region 2: I/O ports at 18d8 [size=8]
Region 3: I/O ports at 18d0 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at fc404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at fa000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-32
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn extlinux 2:4.05+dfsg-2
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
* linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
--- End Message ---
--- Begin Message ---
- To: Nicola Alessi <nialessi@gmx.com>
- Cc: 673588-done@bugs.debian.org
- Subject: Re: Elantech touchpad detected as Logitech PS2 Wheel Mouse
- From: Jonathan Nieder <jrnieder@gmail.com>
- Date: Sun, 30 Sep 2012 11:53:47 -0700
- Message-id: <20120930185347.GA29660@elie.Belkin>
- In-reply-to: <877gw655mi.fsf@emc.com.tw>
- References: <4FB939B5.4000309@gmx.com> <20120520192052.GA3959@burratino> <4FB951A0.6020102@gmx.com> <20120521051825.GB3840@burratino> <877gw655mi.fsf@emc.com.tw>
tags 673588 - moreinfo
quit
Hi again,
In May, JJ Ding wrote:
>> Nicola Alessi wrote:
>>> [ 6.734445] psmouse serio4: elantech: unexpected magic knock
>>> result 0x3c, 0x03, 0x3c.
> ^^^^^^^^^^^^^^^^^
> Yes, from this, the touchpad is probably Elan.
>
> But it is meant to be used as such, a basic pointing device. Some NB
> vendors may not require the multi-finger functions, for cost reason or
> others. Elan touchpad reports this magic knock when it only supports
> the basic mouse functions. With these touchpads, the multi-finger functons
> are NOT TESTED and thus NOT SUPPORTED.
If I remember correctly, overriding the magic knock check was not
enough to make the Elan features work, so it's not clear how to move
forward from here. Therefore closing. If you learn anything more
about the protocol used on this notebook (from documentation or
reverse-engineering), we'd be happy to revisit it, though.
Thanks again for a clear and pleasant report.
Sincerely,
Jonathan
--- End Message ---